NTH - Management Information System

National Test House (NR), Ghaziabad

Kamla Nehru Nagar, Ghaziabad, Uttar Pradesh - 201002, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

7003775955 nthnr-ca@nic.in

Scope List

Reset

476 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

IS 17953 (2023) - uPVC Profiles for Windows and Doors - Specification

uPVC Profiles for Windows and Doors - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Appearance)	1000.0
5.3.1 (Dimensions and Tolerances)	5000.0
5.3.2 (Wall Thickness of Main Profile)	1000.0
5.3.4 (Straightness)	1000.0
5.4 (Mass of Profile)	1000.0
5.5 (Heat Reversion)	2000.0
5.6 (Resistance to Impact on Falling Mass)	3000.0
5.7 (Heat Ageing)	2000.0
5.11 (Density)	1000.0
Annexure B-3.1 (Vicat Softening Temperature)	2000.0
Annexure B-3.2 (Flexural Modulus of Elasticity)	2000.0

CUSTOMER SPEC - NC WHITE GLOSSY SURFACER

NC WHITE GLOSSY SURFACER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Please see the Annexure)	3000.0

IS 133 (2013) - ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Please see the Annexure)	3000.0

NTH/NR/RPPT/PVC Coated Fabric (2024) - PVC Coated Fabric-Both Side Coated

PVC Coated Fabric-Both Side Coated

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7016 Part-I (Weight)	1000.0
IS 7016 Part-I (Thickness)	1000.0
IS 7016 Part-II (Breaking Strength, Warp)	1500.0
IS 7016 Part-II (Breaking Strength, Weft)	1500.0
IS 7016 Part-III (Tear Strength, Warp)	1500.0
IS 7016 Part-III (Tear Strength, Weft)	1500.0
IS 7016 Part-V (Adhesion)	2000.0
IS 7016 Part-VII (Water Proofness @220 PSI)	2000.0

CUSTOM SPEC-SILICA SAND - CUSTOM SPEC FOR SILICA SAND

CUSTOM SPEC FOR SILICA SAND

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Silicon Di Oxide % by mass)	2000.0
1 (IRON OXIDE ,% BY MASS)	2000.0
1 (ALUMINIUM DI OXIDE, % BY MASS)	2000.0
1 (TITANIUM DI OXIDE ,% BY MASS)	2000.0

NTH/NR/RPPT/2023/Sealant Component-B/01 (2023) - Sealant Component-B

Sealant Component-B

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 792 (Relative Density)	2000.0
ASTM D 2240 (Hardness, Shore D)	1000.0
ASTM D 1002 (Lap Shear Strength)	3000.0
ASTM D 695 (Compression Strength)	3000.0
ASTM D 638 (Tensile Strength)	3000.0
Firm's Requirement (Full Cure, Maximum)	1000.0
NCD 1410 (Critical Oxygen Index)	5000.0
NCD 1411 (Smoke Index)	10000.0
On the lines of BS 476 Part-7 (Fire Test)	8000.0

NTH/NR/RPPT/2023/Filler Component-A/01 (2023) - Filler Component-A

Filler Component-A

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 1084 (Viscosity of the Mixture)	2000.0
Firm's Requirement (Full Cure, Maximum)	1000.0
Firm's Requirement (Expansion, Minimum)	3000.0
Firm's Requirement (Critical Oxygen Index (After curing of the compound))	5000.0
Firm's Requirement (Smoke Index (After curing of the compound))	10000.0
On the lines of BS 476 Part-7 (Fire Test)	8000.0

IS 13757-1993 RA 2011 (1993 RA 2011) - Burnt Clay Fly Ash Building Bricks-specification

Burnt Clay Fly Ash Building Bricks-specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 Dimensions and Tolerances (Length, Width, Height mm)	1000.0
7.1 Compressive strength (Compressive strength)	2000.0
7.2 Water Absorption (Water absorption, %)	1000.0
7.3 Efflorescence (Efflorescence)	1000.0

ETI/OHE/50(6/97) re-designated to TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021) - Technical specification for Cadmium copper conductors for over head Electric Traction

Technical specification for Cadmium copper conductors for over head Electric Traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1 (Visual examination)	1000.0
8.2.2 (Chemical composition)	2000.0
8.2.3 (Measurement of diameter of individual wire and stranded conductor)	2000.0
8.2.4 (Measurement of weight of wire and conductor)	2000.0
8.2.5 (Measurement of lay length and lay ratio of each layer of stranded conductor)	5000.0
8.2.6 (Measurement of Electrical resistance of wire and stranded conductor)	15000.0
8.2.7 (Tensile test on wires)	32000.0
8.2.8 (Wrapping test on wires)	5000.0

100

ETI/OHE/76(6/97) - Technical specification for Hard Drawn Grooved Contact wire for Electric traction

Technical specification for Hard Drawn Grooved Contact wire for Electric traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Chemical Composition)	6000.0
8.5.1 (Visual Examination)	1000.0
8.5.2 (Measurement of Dimensions)	2000.0
8.5.3 (Compression Test)	3000.0
8.5.4 (Tensile Strength)	2000.0
8.5.4 (Elongation Test)	1000.0
8.5.6 (Micro-structure Examination)	3000.0
9.5.8 (Bending Test)	1000.0
9.5.6 (Brinell Hardness Test)	1.0
9.5.10 (Electrical Resistance Test)	2000.0
9.5.5 (Measurement of Weight)	1000.0

101

TI/SPC/OHE/CAT (Cu-Mg)/0150 (2016) - Hard drawn stranded Magnesium Copper Conductors

Hard drawn stranded Magnesium Copper Conductors

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Copper Content, % by Mass)	1000.0
5.1 (Magnesium Content, % by Mass)	1000.0
5.1 (Chemical composition, % by Mass)	5000.0
12.2 (Diameter, mm)	1000.0
Weight per Kilometre (Weight per Kilometre, kg)	1000.0
12.2 (Resistance per km at 20 deg. C)	2000.0
12.2 (Breaking load of individual wire)	19000.0
12.2 (Tensile strength of wire)	3000.0
0 (Lay length and Lay ratio)	1000.0
0 (Wrapping test)	1000.0

102

IS 13498- 2017 (2017) - BATHING BAR SPECIFICATION (for NR)

BATHING BAR SPECIFICATION (for NR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clauses 5.1, 7.3 and 8.1, Table 1 (Please see the annexure.)	10000.0

103

IS :7884- 2023 (2023) - SHAMPOO Specification (for NR)

SHAMPOO Specification (for NR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CL-3.4, Table 1 (Please see Annexure.)	8000.0

104

IS 13114 (1991) - forged brass gate, globe and check valves for water works purposes

forged brass gate, globe and check valves for water works purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Dimensions)	1000.0
9.2 (Materials)	2000.0
9.3 (Shell Test (Hydrostatic Test))	2500.0
9.3 (Seat & Backseat Test (Hydrostatic Test))	2500.0

105

IS 13095 (2020) - Butterfly Valves for General Purposes ( First Revision )

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Face to Face Dimensions)	1000.0
17.2 (Hydrostatic Test of Body)	2500.0
17.3 (Hydrostatic Test of Seat)	2500.0
15 (Materials)	2000.0
17.4 (Hydrostatic Test of Disc Strength)	2500.0
17.1 (Performance Test)	5000.0

106

IS 1065 : Part 1 (2019) - Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Available Chlorine)	2500.0

107

IS 13213 (2018) - Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible Tests))	60000.0
Cl 1 Table 1 (Please see Annexure Durability ( Outdoor exposure only) + Keeping properties)	30000.0

108

IS 14946 (2001) - Zinc ethyl silicate primer, two components - Specification

Zinc ethyl silicate primer, two components - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible tests))	90000.0
Cl 1 Table 1 (Please see Annexure for Salt spray & Protection against corrosion test)	70000.0

109

IS 13213 (2018) - Polyurethane Full Gloss Enamel (Two Pack) — Specification

Polyurethane Full Gloss Enamel (Two Pack) — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Polyurethane Full Gloss Enamel (Two Pack) — Specification (Please refer annexure for tests result)	46000.0

110

NTH/NR/RPPT/HDPE Membrane (2023) - HDPE Membrane for Waterproofing

HDPE Membrane for Waterproofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Puncture Resistance)	3000.0
Firm's Requirement (Tensile Strength)	2000.0
Firm's Requirement (Elongation)	2000.0
Firm's Requirement (Peel Adhesion to Concrete)	3000.0

111

IS 1776 (1989) - Folding box board, uncoated - Specification (First Revision)

Folding box board, uncoated - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Substance (Grammage))	1000.0
Table 1 (Burst Index)	2000.0
Table-1 (pH (both sides))	1000.0
Table-1 (Ash Content)	2000.0
Table-1 (One Minute Cobb Test (Front))	2000.0
Table-1 (One Minute Cobb Test (Back))	2000.0
Table-1 (Moisture Content (As received))	1000.0
Table-1 (Brightness of White Boards, Front Side only)	2000.0
Table-1 (Stiffness Factor)	1000.0
Table-1 (Wax Pick (Front))	2000.0
Table-1 (Wax Pick (Back))	2000.0
Table-1 (Smoothness)	2000.0

112

Custom/Civil/Misc/2023-24 - .

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Rebound Hammer per segment)	1500.0
3 (Scientists charge)	10000.0
1 (Hardness of Stone)	1000.0
2 (Dimensions of Sanitary Fittings)	2000.0
5 (Thickness of Board)	1000.0
6 (Thickness of Laminate of Board)	1000.0
7 (Thickness of Board with Laminate)	1000.0
- (Vetting of Specification-consultancy)	10000.0

113

IS 2508 (2016) - Low Density Polyethylene Films

Low Density Polyethylene Films

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Thickness)	4000.0

114

IS 516 : Part 5 : Sec 4 (2020) - Hardened Concrete Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test ( First Revision )

Hardened Concrete Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Rebound hammer test (field test) -Per Ten locations)	15000.0
- - (Scientist charges (2 Scientists) for site testing / inspection)	10000.0
- (Rebound Hammer test)	3000.0

115

IS:309-2005 - COMPRESSED OXYGEN GAS — SPECIFICATION

COMPRESSED OXYGEN GAS — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CLAUSE-4,Table-1 (Purity of compressed oxygen gas)	4000.0
CLAUSE-4,Table-1 (DEW POINT)	2000.0
CLAUSE-4,Table-1 (Volume Fraction of Carbonmonoxide and Carbondioxide)	2000.0
CLAUSE-4,Table-1 (Volume Fraction of Hydrocarbons)	2000.0

116

IS 341 (2016) - Black japan, types a, b and c - Specification (Second Revision)

Black japan, types a, b and c - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
x) (Keeping properties)	5000.0
ix) (Flash point)	1200.0
viii) (Resistance to heat (for 2 h) (for Type C))	1200.0
vii) (Resistance to kerosene for Types B and C))	1500.0
vi) (Stripping test)	1200.0
b) (Scratch hardness (load 1 000g))	1500.0
a) (Bend test (with 6.25 mm dia mandrel and in type 1 apparatus))	1500.0
iv) (Ash content percent by mass)	1200.0
iii) (Volatile matter content, percent by mass, Max)	2000.0
ii) (Finish)	1200.0
5.6 Table i) b) (b) Hard dry)	1500.0
5.6 Table i) a) (a) surface dry)	1200.0
5.6 Table i) (Drying time)	1500.0
5.5 (Durability)	8000.0
5.4 (Lead Restriction)	2500.0
5.3 (Reaction with Varnish, Exterior)	1200.0
5.2 (Reaction with White Paint)	1000.0
5.1 (Composition)	2000.0

117

IS 5206 (1983) - Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Tensile Strength)	2000.0
9.2 (Elongation)	1000.0
9.2 (preparation of Butt Weld assembly)	4000.0
5.3 (Length of Electrodes)	500.0
6.1 (Bare Length-Contact End)	500.0
6.2 (Bare Length-Arc stricking end)	500.0
6.3 (Flux Covering)	500.0
9.1 (Copper)	500.0
9.1 (Molybdenum)	500.0
9.1 (Chromium)	500.0
9.1 (Nickel)	500.0
9.1 (Phosphorus)	500.0
9.1 (Sulphur)	500.0
9.1 (Manganese)	500.0
9.1 (Silicon)	500.0
9.1 (Carbon)	500.0
9.3 (preparation of Fillet weld assembly)	3000.0
1 (Macro examination)	1000.0
0 (Preparation of Weld piece)	3000.0

118

Custom/NDT/NR - -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

119

AWS specification - Specification for Fracture Test

Specification for Fracture Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Fracture Test)	9000.0

120

Fastener as per ISO/EN/BS EN - Mechanical properties of Fastener as per ISO 898 (Part- 1, 2), EN 14399 (P-3,5,9), ISO 10683

Mechanical properties of Fastener as per ISO 898 (Part- 1, 2), EN 14399 (P-3,5,9), ISO 10683

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Proof Load, kN)	3000.0
7.2 (Hardness)	2000.0
7.3 (Surface Integrity)	2000.0
7.4 (Depth of Decarburisation)	2000.0
7.5 (Coating Thickness, micron)	2000.0
7.6 (Adhesion test)	1000.0
6 (Chemical composition, % by mass)	2500.0
5.1 (Wedge Load Test)	3000.0
5.2 (Tensile test- TS, YS, %E and RoA)	4000.0
5.4 (Charpy Impact Test, At -20 deg C)	3000.0
5.5 (Compression load Test)	3000.0
5.5 (Dimensions, mm)	2000.0

First
Prev
3
4
5
6
Next
Last