| 1 |
IS 14223 (Part 1):2023 - Polished Building Stones —Specification (Part 1-Granite and Similar Stones) |
Polished Building Stones —Specification (Part 1-Granite and Similar Stones) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5,Table 1-(i) (Specific gravity ( as per IS 1124)) |
1000.0 |
|
| 5,Table-1(ii) (Water absorption (as per IS 1124)) |
1000.0 |
|
| 5,Table-1(vi) (Hardness, in Mohs (as per IS 13630 (Part 13))) |
2000.0 |
|
| 5,Table-1(x) (Resistance to wear- a)Average b)Individual maximum, in mm (as per IS 1706)) |
4000.0 |
|
|
| 2 |
Custom HV Specification - Custom High Voltage Specification based on IEC 61109, IEC 62271, IS 9921, IS 9385(Part 1 & Part 3) |
Custom High Voltage Specification based on IEC 61109, IEC 62271, IS 9921, IS 9385(Part 1 & Part 3) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 05 (Temperature Rise test) |
25000.0 |
|
|
| 3 |
Custom-1-TOOL KIT (2025) - TOOL KIT |
TOOL KIT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Dimension, Hardness, workmanship of Hammer) |
8000.0 |
|
| 2.0 (Dimensions of Hacksaw Frame) |
1000.0 |
|
| 2.1 (PVC Identification of Hacksaw Frame) |
3000.0 |
|
| 3 (Dimensions and Workmanship of Pipe Wrench) |
3000.0 |
|
| 4 (Dimensions, Frame Hardness & Workmanship of Adjustable Wrench) |
5000.0 |
|
| 5.0 (Dimensions, Hardness of the Body, Bend Test of Plier) |
5000.0 |
|
| 5.1 (Insulation Test of Plier) |
5000.0 |
|
| 6.0 (Dimensions, Hardness of the Body, Workmanship and Finish of Long Nose Plier) |
5000.0 |
|
| 6.1 (Insulation Test of Long Nose Plier) |
5000.0 |
|
| 6.2 (PVC Identification of Long Nose Plier) |
3000.0 |
|
| 7.0 (Dimensions, Workmanship and Finish of Screw Driver 13 Inch) |
3000.0 |
|
| 7.1 (Insulation test of Screw Driver 13 Inch) |
5000.0 |
|
| 7.2 (Plastic Identification of Screw Driver 13 Inch) |
3000.0 |
|
| 8.0 (Dimensions , workmanship & Finish of Screw Driver 7 Inch) |
3000.0 |
|
| 8.1 (Insulation Test of Screw Driver 7 Inch) |
5000.0 |
|
| 8.2 (Plastic Identification of Screw Driver 7 Inch) |
3000.0 |
|
| 9.0 (Dimensions of LT Tester) |
1000.0 |
|
| 9.1 (Insulation Test of LT Tester) |
5000.0 |
|
| 10.0 (Dimensions of Measuring Tape) |
1000.0 |
|
| 10.1 (Plastic Identification of Measuring Tape) |
3000.0 |
|
| 11.0 (Dimensions of Electrician Knife/Cutter) |
2000.0 |
|
| 11.1 (Plastic Identification of Electrician Knife/Cutter) |
3000.0 |
|
| 12.0 (Dimensions, Hardness and Workmanship of Double Ring Spanner Set) |
24000.0 |
|
| 13.0 (Dimensions, Hardness and Workmanship of Double Ended Spanner Set) |
24000.0 |
|
| 14.0 (Dimensions and Workmanship of File With Handle) |
2500.0 |
|
| 15.0 (Dimensions and Material Testing of Tool Kit Bag) |
14000.0 |
|
| 16 (Dimensions And weight of Brass Earth Chain) |
4000.0 |
|
|
| 4 |
Custom Specn. for Alloy Steel - Testing of Alloy Steel |
Testing of Alloy Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Please see Annexure) |
3000.0 |
|
|
| 5 |
IS 8183:1993 - Bonded Mineral Wool |
Bonded Mineral Wool |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1. (Description) |
1000.0 |
|
| 4.2 (Bulk density (IS 3144 )) |
1000.0 |
|
| 4.3 (Recovery after Compression(IS 3144)) |
1500.0 |
|
| 4.5 (Moisture content (IS 3144)) |
1000.0 |
|
| 4.5 (Moisture Absorption (IS 3144)) |
1000.0 |
|
| 4.8 (Sulphur content(IS 3144)) |
1000.0 |
|
| 4.9 (Dimension) |
1000.0 |
|
| 4.10.6 (Alkalinity ( IS 3144)) |
1000.0 |
|
| 4.4 (Shot Content) |
2000.0 |
|
|
| 6 |
CUSTOMER SPEC SILT - CUSTOMER SPEC SILT |
CUSTOMER SPEC SILT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (pH value) |
1200.0 |
|
| 3 (Electrical Conductivity) |
1200.0 |
|
| 2 (Moisture Content) |
1200.0 |
|
| 1 (Loss of ignition) |
1200.0 |
|
|
| 7 |
Custom NR HV TPMO - As per Customer Test Request |
As per Customer Test Request |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (As per DVVNL GTP (Annexure Attached)) |
56000.0 |
|
|
| 8 |
IS 16985 (2018) - Duplex board/coated duplex board - Specification |
Duplex board/coated duplex board - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.3 (Thickness) |
1000.0 |
|
| 6.4 (Grammage) |
1000.0 |
|
| Table 1(i) (Bulk) |
1000.0 |
|
| Table 1(ii) (Moisture Content) |
1000.0 |
|
| Table 1(iii) (One minute cobb, Top) |
1000.0 |
|
| Table 1(iii) (One minute cobb, Back) |
1000.0 |
|
| Table 1(iv) (Taber Stiffness) |
2000.0 |
|
| Table 1(v) (Brightness) |
2000.0 |
|
| Table 1(vi) (Gloss) |
2000.0 |
|
|
| 9 |
Custom Spec VOC & Heavy metals - Custom Spec VOC & Heavy metals |
Custom Spec VOC & Heavy metals |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (VOC (%)) |
2000.0 |
|
| 3 (Heavy Metals Mercury) |
1000.0 |
|
| 2 (Heavy Metals Lead) |
1000.0 |
|
| 1 (Heavy Metals Chromium) |
1000.0 |
|
|
| 10 |
5517 (1993) - STEELS FOR HARDENING AND TEMPERING |
STEELS FOR HARDENING AND TEMPERING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Tensile Strength) |
1000.0 |
|
| 9 (0.2 Percent Proof Stress/Yield Strength) |
1000.0 |
|
| 9 (Elongation 5.65/А Реrcent,) |
1000.0 |
|
| 8 (Brinell Hardness) |
2000.0 |
|
| 0 (Bend Test) |
1000.0 |
|
| 6 (Carbon %) |
500.0 |
|
| 6 (Sulphur %) |
500.0 |
|
| 6 (Phosphorous %) |
500.0 |
|
| 6 (Manganese %) |
1000.0 |
|
| 6 (Silicon %) |
1000.0 |
|
| 6 (Chromium %) |
1000.0 |
|
|
| 11 |
NTH/NR/RPPT/IGNOU/Cover Paper (2025) - Cover Paper Specification |
Cover Paper Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| As per IS 6956:2001 (Results of Tests) |
177100.0 |
|
|
| 12 |
NTH/NR/RPPT/IGNOU/Text Paper (2025) - Text Paper Specification |
Text Paper Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| As per IS 1848 (Part-1):2018 (Results of Tests) |
161000.0 |
|
|
| 13 |
IS 13015 (1991) - Steel products - Macroetch testing, inspection and rating - Specification |
Steel products - Macroetch testing, inspection and rating - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Metallography-Macroetch) |
1000.0 |
|
| 6.2 (Metallography-Macroetch) |
1000.0 |
|
| 6.3 (Metallography-Macroetch) |
1000.0 |
|
|
| 14 |
IS 1720 (1978) - COTTON SEWING THREADS |
COTTON SEWING THREADS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table-1 (Nominal Count) |
2000.0 |
|
| Table-1 (Construction) |
1000.0 |
|
| Table-1 (Length) |
2000.0 |
|
| Table-1 (Single Thread Breaking Load) |
2000.0 |
|
|
| 15 |
IS 9143:1979 - Indian standard-Method for the determination of Unconfined Compressive strength of Rock materials |
Indian standard-Method for the determination of Unconfined Compressive strength of Rock materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Unconfined Compressive strength /Uniaxial Compressive strength-N/ Sq mm) |
5000.0 |
|
|
| 16 |
IS 894 (1980) - Specification For Handloom Wool Blankets Brick Red (First Revision) |
Specification For Handloom Wool Blankets Brick Red (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Ends/dm) |
1000.0 |
|
| 3.1 (Picks/dm) |
1000.0 |
|
| 3.1 (Breaking load (Warp)) |
1000.0 |
|
| 3.1 (Breaking Load (Weft)) |
1000.0 |
|
| 3.1 (Type of Weave) |
1000.0 |
|
| 3.2 (Scouring loss) |
2000.0 |
|
| Firm's request (Stitches per cm) |
1000.0 |
|
| Firm's request (Fiber Composition) |
2000.0 |
|
| Firm's request (Colour of the Blanket) |
500.0 |
|
|
| 17 |
CUSTOMER SPEC EPOXY - Flexibility & Adhesion Test |
Flexibility & Adhesion Test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Flexibility and Adhesion Test) |
2000.0 |
|
|
| 18 |
IS 17568 (2021) - THERMAL PAPER SPECIFICATION |
THERMAL PAPER SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3 (Grammage) |
1000.0 |
|
| 4.2 (Tensile Index, MD) |
1000.0 |
|
| 4.2 (Tensile Index, CD) |
1000.0 |
|
| 4.2 (Tear Index, MD) |
1000.0 |
|
| 4.2 (Tear Index, CD) |
1000.0 |
|
| 4.2 (Opacity) |
2000.0 |
|
| 4.2 (Brightness ISO) |
2000.0 |
|
| 4.2 (Gloss at 75 deg.) |
1500.0 |
|
| 4.2 (Smoothness (Bendtsen)) |
2000.0 |
|
| 4.2 (Wax Pick) |
2000.0 |
|
| Firm's requirement (Thickness) |
1000.0 |
|
| Firm's requirement (Paper Density) |
1000.0 |
|
| Firm's requirement (Moisture Content) |
1000.0 |
|
|
| 19 |
IS 229 (1993) - ETHYL ACETATE SPECIFICATION Fourth Revision |
ETHYL ACETATE SPECIFICATION Fourth Revision |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Please see the Annexure) |
12000.0 |
|
|
| 20 |
IS 13730 (2018) - Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision ) |
Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| -- (Resistance) |
2000.0 |
|
| Tests (1)Daimeter (With Paper and Without Paper), Arrangement of Layer.
2) Additional Test Requirement as desired by the customer: Tensile Strength of Paper) |
4000.0 |
|
|
| 21 |
IS 13730 : Part 27 (2018) - Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision ) |
Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 22 |
Non IS /PU Paint/01 - Testing of PU Paint |
Testing of PU Paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Pl. see annexure) |
8000.0 |
|
|
| 23 |
IS 12818 (2010) - UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) SCREEN AND CASING PIPES FOR BORE/TUBEWELLS |
UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) SCREEN AND CASING PIPES FOR BORE/TUBEWELLS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2.1 (IS:12818-2010 (OD)) |
500.0 |
|
| 7.2.1 (IS:12818-2010 (Wall Thickness)) |
500.0 |
|
| 9.1 (Visual Appearance) |
1000.0 |
|
| 9.2 (Internal Diameter) |
1000.0 |
|
| 9.3 (IS:12235 (Part-14) (Density)) |
2000.0 |
|
| 9.4 (Resistance to External blow at 0°C) |
2000.0 |
|
| 9.5 (IS:12235 (Part-13) Tensile Strength) |
2000.0 |
|
| 9.6 (Vicat Softening Temperature) |
2000.0 |
|
| 9.7 (Effect on Water) |
5000.0 |
|
|
| 24 |
NTH/NR/CUSTO/PAINT - ANTI SKID PAINT |
ANTI SKID PAINT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (SKID RESISTANCE TEST) |
5000.0 |
|
| 2 (Impact resistant test) |
2000.0 |
|
| 3 (Scratch Hardness test) |
2000.0 |
|
| 3 (Water resistant test) |
2000.0 |
|
| 4 (Fire Resistance test for 2 hours at Bunsen burner flame) |
2000.0 |
|
| 5 (Fire Resistance test for 4 hours at Bunsen burner flame) |
4000.0 |
|
|
| 25 |
Customised PU Paint/25 - Testing of PU Paint |
Testing of PU Paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Skin formation) |
2000.0 |
|
| 2 (Colour) |
2000.0 |
|
| 3 (Solid Content %) |
2000.0 |
|
| 4 (Density,g/ml) |
2000.0 |
|
|
| 26 |
Nitrile Rubber - Nitrile Rubber |
Nitrile Rubber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Firm's requirement (Thickness) |
1000.0 |
|
| Firm's requirment (Density) |
1000.0 |
|
| Firm's requirement (Fire Rating) |
4000.0 |
|
|
| 27 |
IS/IEC 62271 : Part 103 (2011) - High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV |
High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.102.2.1 (Mechanical Endurance Test for Class M1 Switches) |
100000.0 |
|
| 6.2.6.1 of IEC 62271-1 (Power Frequency Voltage Test) |
10000.0 |
|
|
| 28 |
IS/IEC 62271 : PART 100 (2008) - High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.101.1, 7.101.2.1, 7.101.2.2, 7.101.2.3 (Circuit Breaker Endurance Test for Class M2 10000 Operations) |
100000.0 |
|
|
| 29 |
IS 9738:2025 (2025) - Polyethylene Bags for General Purposes — Specification |
Polyethylene Bags for General Purposes — Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Structure and Shape) |
500.0 |
|
| 7 (Dimensions) |
2000.0 |
|
| 8.1 (Appearance) |
500.0 |
|
| 8.2 (Water Leak Test) |
2000.0 |
|
| 8.3 (Printing Ink Adhesion Test) |
1000.0 |
|
| 8.4 (Drop Test) |
2000.0 |
|
|
| 30 |
IS 4260 (2004) - Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) |
Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 4260 (Ultrasonic examination) |
2000.0 |
|
|
