NTH - Management Information System

National Test House (NR), Ghaziabad

Kamla Nehru Nagar, Ghaziabad, Uttar Pradesh - 201002, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

7003775955 nthnr-ca@nic.in

Scope List

Reset

561 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

NTH/NR/IRCON/Seat Plate (2025) - Seat Plate

Seat Plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	5000.0

NTH/NR/IRCON/Booted Sleeper Pad (2025) - Booted Sleeper Pad

Booted Sleeper Pad

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirements (Results of Test)	3000.0

NTH/NR/IRCON/Rubber Boot (2025) - Rubber Boot

Rubber Boot

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	13000.0

NTH/NR/IRCON/PVC Membrane (2025) - PVC Water Proofing Membrane

PVC Water Proofing Membrane

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	36000.0

NTH/NR/IRCON/Geotextile (2025) - Non Woven Geotextiles

Non Woven Geotextiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	10000.0

IS 16532 (2017) - APP Modified Bituminous Waterproofing and DampProofing Membrane with Polyester Reinforcement - Specification

APP Modified Bituminous Waterproofing and DampProofing Membrane with Polyester Reinforcement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Dimensions)	1000.0
5.2 (Weight (GSM))	1000.0
Table 4 (i) (Thickness of Membrane)	500.0
Table 4 (ii) (Cold Flexibility)	2000.0
Table 4 (iii) (Softening Point)	1500.0
Table 4 (iv) (Tensile Strength, Longitudinal)	1000.0
Table 4 (iv) (Tensile Strength, Transverse)	1000.0
Table 4 (v) (Elongation, Longitudinal)	500.0
Table 4 (v) (Elongation, Tarnsverse)	500.0
Table 4 (vi) (Tear Strength, Longitudinal)	1000.0
Table 4 (vi) (Tear Strength, Transverse)	1000.0
Table 4 (vii) (Heat Resistance)	1000.0
Table 4 (viii) (Penetration @25°C, 100g, 5s)	2000.0
Table 4 (ix) (Water Absorption)	1000.0
Table 4 (x) (Dimension stability, longitudinal/transverse)	1000.0
Table 4 (xi) (Pressure Head Test)	1000.0
4.1.1 (Type of Reinforcement)	1000.0

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA ) [501kVA TO 1000 kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	35000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	7000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	20000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1500.0
21.2(d) (Measurement of no Load and loss and current)	6000.0
21.2(f) (lnduced Over Voltage withstand test)	3000.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the transformer)	10000.0
21.3(a) (Lightning Impulse Voltage Test)	50000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	5000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	5000.0
N.A. (Unbalance Current)	5000.0

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA ) [1kVA to 200KVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	24000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	10000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	5000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	10000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lighting Impulse Voltage Test)	35000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	3000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	10000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	3000.0
N.A. (Unbalance Current)	3000.0
Customer Requirement (Repeat of No-load Loss Measurement)	5000.0
Customer Requirement (Measurement of No-load Loss & Current at 90%, 100% & 110% of Rated Voltage)	5000.0
Customer Requirement (Measurement of Magnetization Current (No Load Current) at 415 V on LV Side)	2000.0

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA ) [1kVA to 100kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	15000.0
21.2(a) (Measurement of Winding Resistance)	700.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	700.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	6000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	3500.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	5000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	3000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	6500.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	700.0
21.2(d) (Measurement of no Load and loss and current)	3000.0
21.2(f) (lnduced Over Voltage withstand test)	1200.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lighting Impulse Voltage Test)	25000.0
21.2(g) (AC High Voltage Withstand Test)	1200.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	2000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	6000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	2000.0
N.A. (Unbalance Current)	2000.0

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA ) [201kVA TO 500kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	30000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	6000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	15000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lightning Impulse Voltage Test)	40000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	4000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	4000.0
N.A. (Unbalance Current)	4000.0

IS:3400 PT-22 1984 - METHODS OF TEST FOR VULCANIZED RUBBER Sulphur content only

METHODS OF TEST FOR VULCANIZED RUBBER Sulphur content only

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 4 .A-3 (TOTAL SULPHUR CONTENT % by mass)	7000.0

IS 758 (2023) - Medical Textiles - Cotton Absorbent Gauze - Specification

Medical Textiles - Cotton Absorbent Gauze - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	1000.0

IS 758 (1988) - Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IS 17508 (2020) - Disposable Adult Incontinence Diaper - Specification

Disposable Adult Incontinence Diaper - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specifictaion (Results of Test)	1000.0

NTH/NR/XR/2024/School Uniform/01 (2025) - School Uniform

School Uniform

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	1000.0

IS 17509 (2021) - Disposable Baby Diaper Specification

Disposable Baby Diaper Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	1000.0

CUSTOM - Water

Water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

398 (Part-4) (1994) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES, PART 4 ALUMINIUM ALLOY STRANDED CONDUCTORS (ALUMINIUM-MAGNESIUM-SILICON TYPE)

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES, PART 4 ALUMINIUM ALLOY STRANDED CONDUCTORS (ALUMINIUM-MAGNESIUM-SILICON TYPE)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.4 (Lay Ratio)	1000.0
6 (Freedom From Defects)	1000.0
7.1 (Wire Diameter)	1000.0
12.2.1 (Breaking Load Test of Strand)	3000.0
12.3 (Elongation Test)	3000.0
12.4 (Resistance Test)	2000.0
8 (Joints in Wires)	1000.0
12.2 (Breaking Load Test of Wire)	3000.0

NTH/NER/Custom/2022/03 - Chemical General

Chemical General

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Silica (as SiO2), % by mass)	1000.0

IS 1891 : Part 1 (2021) - CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)

CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

IS 3735 (1996) - Canvas Shoes, Rubber Sole

Canvas Shoes, Rubber Sole

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

IS 13893 (1994) - Polyurethane soles semirigid - specification

Polyurethane soles semirigid - specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

IS 10702 (1992) - Rubber hawal chappal - Specification (Second Revision)

Rubber hawal chappal - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

IS 11544 (1986) - Specification for slipper, rubber

Specification for slipper, rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

IS 6719 (1972) - Solid Pvc Soles And Heels

Solid Pvc Soles And Heels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

IS 5557 : Part 2 (2018) - All rubber gum boots and ankle boots: Part 2 occupational purposes

All rubber gum boots and ankle boots: Part 2 occupational purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

IS 15298 : Part 2 (2016) - Personal protective equipment: Part 2 safety footwear (Second Revision)

Personal protective equipment: Part 2 safety footwear (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

NTH/NR/RPPT/Ceiling Tiles/01 (2024) - Solid Mineral Surface Ceiling Tile

Solid Mineral Surface Ceiling Tile

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Req. (Density)	1000.0
Firm's Req. (Tensile Strength)	1500.0
Firm's Req. (Elongation@break)	1500.0
Firm's Req. (Boiling Water Resistance)	2000.0
Firm's Req. (Dry Heat Resistance @40-60°C)	2000.0
Firm's Req. (Stain Resistance)	5000.0
Firm's Req. (Chemical Resistance)	5000.0
Firm's Req. (High Heat Resistance @65°C)	2000.0

CUSTOMER SPEC ORGANIC COSMO - CUSTOMER SPEC ORGANIC COSMO

CUSTOMER SPEC ORGANIC COSMO

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (SLS/SLES)	2000.0
1 (SLS/SLES)	1000.0
2 (Heavy Metals)	4000.0
3 (Sulphate)	1000.0

IS 1202-2021 (2021) - Method for Testing Tar and Bituminous Materials-Determination of Specific Gravity

Method for Testing Tar and Bituminous Materials-Determination of Specific Gravity

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.1 (Specific Gravity of Bitumen)	2000.0

First
Prev
2
3
4
5
Next
Last