| 2911 |
National Test House (NER), Guwahati
| IS 3316 (1974) - Structural Granite |
Structural Granite |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Water Absorption) |
1000.0 |
|
| 3.2 (Specific Gravity) |
1000.0 |
|
| 3.1 (Compressive Strength) |
2000.0 |
|
|
| 2912 |
National Test House (Satellite Centre), Varanasi
| IS 456 (2000) - Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision) |
Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4 (Total Inorganic Solids) |
500.0 |
|
| 5.4 (Total Organic Solids) |
500.0 |
|
| 5.4 (Sulphates ( as SO3)) |
1000.0 |
|
| 5.4 (Chlorides (as Cl)) |
1000.0 |
|
| 5.4 (Suspended Matter) |
500.0 |
|
| 5.4 (Total dissolved solids) |
1000.0 |
|
| 5.4 (Volume (in ml) of 0.02 (N) NaOH required for Neutralization of 100 ml water using phenolphthalein as an indicator.) |
500.0 |
|
| 5.4 (Volume (in ml) of 0.02 (N) H2SO4 required for Neutralization of 100 ml water using mixed indicator.) |
500.0 |
|
| 5.4 (pH) |
500.0 |
|
|
| 2913 |
National Test House (SR), Chennai
| CUS/SR/MECH-9 - Link assembly |
Link assembly |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Proof load) |
2500.0 |
|
| 2.0 (Tensile load) |
2500.0 |
|
|
| 2914 |
National Test House (SR), Chennai
| IS 7739 : Part 5 (1976) - Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination |
Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 7739 (Microstructure) |
3000.0 |
|
|
| 2915 |
National Test House (NR), Ghaziabad
| IS 1730 (1989) - Dimensions for steel plates,sheets strips and flats for general engineering purposes |
Dimensions for steel plates,sheets strips and flats for general engineering purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Length of Cover Plate) |
1000.0 |
|
| 5 (Thickness of Cover Plate) |
1000.0 |
|
| 6 (Width of Cover Plate) |
1000.0 |
|
| 7 (Thickness of Omega Clamp) |
1000.0 |
|
| 4.2 (Width of Omega Clamp) |
1000.0 |
|
| 4.3 (Length of Omega Clamp) |
1000.0 |
|
| 9 (Mass of Zinc Coating) |
2000.0 |
|
| 4.1 (Measurement of Dimensions) |
2000.0 |
|
| 0 (Mass) |
1000.0 |
|
| 0 (Chemical Composition) |
3000.0 |
|
| 0 (Coating Thickness) |
2000.0 |
|
| 0 (Uniformity of Coating) |
1000.0 |
|
| 0 (Length) |
1000.0 |
|
| 5.2 (Width) |
1000.0 |
|
| 0 (Adhesion test) |
1000.0 |
|
| 0 (Salt Spray Test, 1440 Hrs) |
60000.0 |
|
| 5.1 (Thickness) |
1000.0 |
|
|
| 2916 |
National Test House (NR), Ghaziabad
| IS 280 (2006) - Mild steel wire for general engineering purposes (Fourth Revision) |
Mild steel wire for general engineering purposes (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Wrapping Test) |
1000.0 |
|
| 9.1 (Tensile Strength) |
3000.0 |
|
| 0 (Mass of Zinc Coating) |
2000.0 |
|
| 6 (Chemical composition) |
2500.0 |
|
| 0 (Mass of Zinc Coating) |
2000.0 |
|
| 0 (Uniformity of Coating) |
1000.0 |
|
| 0 (Coating Thickness) |
2000.0 |
|
| 0 (Weight) |
1000.0 |
|
| 0 (Tensile Strength of Wire) |
1000.0 |
|
| 0 (Weld Shear Strength) |
3000.0 |
|
| 7.1 (Wire Diameter) |
1000.0 |
|
| 7.1 (Wire Diameter) |
1000.0 |
|
| 0 (Adhesion Test) |
1000.0 |
|
| 13 (Freedom From Defects) |
1000.0 |
|
| 0 (Salt Spray Test, 1000 hrs) |
42000.0 |
|
| 0 (Dimension, mm) |
1000.0 |
|
| NA (Salt Spray Test, 1440 hrs) |
57600.0 |
|
| 0 (Visual Examination) |
1000.0 |
|
| 10 (FINISH) |
1000.0 |
|
|
| 2917 |
National Test House (NR), Ghaziabad
| BSEH/OMR Sheet (2022) - Board of School Education-OMR Sheet |
Board of School Education-OMR Sheet |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Grammage (GSM)) |
2000.0 |
|
| 2 (Size of OMR Sheet) |
2520.0 |
|
| 3 (Perforation) |
1500.0 |
|
| 4 (Numbering) |
1500.0 |
|
| 5 (Stitching) |
2000.0 |
|
| 6 (Color (Front Page)) |
2000.0 |
|
| 7 (Color (Back Page)) |
2000.0 |
|
| 8 (Bar Code Printing) |
1500.0 |
|
| 9 (Time Bar Printing) |
1500.0 |
|
|
| 2918 |
National Test House (NR), Ghaziabad
| BSEH/Answer Book (2022) - Board of School Education-Answer Book |
Board of School Education-Answer Book |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Grammage of Inner Pages (GSM)) |
1000.0 |
|
| 2 (Tensile Index Machine Direction (Nm/g)) |
3000.0 |
|
| 3 (Tensile Index Cross Direction (Nm/g)) |
3000.0 |
|
| 4 (One Minute Cobb Test) |
3000.0 |
|
| 5 (Brightness (%)) |
2000.0 |
|
| 6 (Opacity (%)) |
2000.0 |
|
| 7 (Number of Leaves) |
2520.0 |
|
|
| 2919 |
National Test House (SR), Chennai
| Customer specification - Flame retardant test for 4 hours |
Flame retardant test for 4 hours |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 27600 (FLAME RETARDANT TEST FOR 4 Hrs.) |
3000.0 |
|
|
| 2920 |
National Test House (ER), Kolkata
| ASTM A537 (2013) - SPECIFICATION FOR PRESSURE VESSEL PLATES,HEAT-TREATED, CARBON-MANGANESE-SILICON STEEL |
SPECIFICATION FOR PRESSURE VESSEL PLATES,HEAT-TREATED, CARBON-MANGANESE-SILICON STEEL |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Carbon) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 6 (Phosphorus) |
500.0 |
|
| 6 (Sulfur) |
500.0 |
|
| 6 (Silicon) |
500.0 |
|
| 6 (Copper) |
1000.0 |
|
| 6 (Nickel) |
1000.0 |
|
| 6 (Chromium) |
1000.0 |
|
| 6 (Molybdenum) |
1000.0 |
|
| 7 (Tensile strength) |
2000.0 |
|
| 7 (Yield strength) |
1000.0 |
|
| 7 (Elongation in 50 mm) |
1000.0 |
|
| S5 (Charpy V-Notch Impact Test at 0 Deg. C) |
4000.0 |
|
|
| 2921 |
National Test House (SR), Chennai
| IS 2202 : Part 1 (2023) - Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision) |
Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.15 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998) |
1500.0 |
|
| 11.14 (Glue Adhesion Test-IS 4020 (Part 15):1998 for BWP and (60± 2)°C for MR) |
1000.0 |
|
| 11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998) |
2000.0 |
|
| 11.2 (General Flatness-IS 4020 (Part 3):1998) |
1000.0 |
|
| 11.3 (Local planeness Test-IS 4020 (Part 4):1998) |
1000.0 |
|
| 11.4 (Impact Indentation-IS 4020 (Part 5):1998) |
1000.0 |
|
| 11.9.2 or 11.9.3 (Slamming Test-Cl 2.1 or 3.1 of IS 4020 (Part 10):1998) |
1000.0 |
|
| 11.8 (Buckling Test-IS 4020 (Part 9):1998) |
1500.0 |
|
| 11.9.2 or 11.9.3 (Slamming Test-Cl 2.1 or 3.1 of IS 4020 (Part 10):1998) |
1000.0 |
|
| 11.12 (End Immersion Test-IS 4020 (Part 13):1998 for BWP and 3cycle for MR) |
1000.0 |
|
| 11.10 (Misuse Test-IIS 4020 (Part 11):1998) |
1000.0 |
|
| 11.6 (Edge loading test-IS 4020 (Part 7):1998) |
1500.0 |
|
| 11.7.1 and 11.7.2 (Shock Resistance test- Cl 2.1 & 3.1 of IS 4020 (Part 8):1998) |
1500.0 |
|
| 9 (Workmanship and Finish-IS 2202 (Part 1):1999) |
1000.0 |
|
| 11.13 (Knife test-IS 4020 (Part 14):1998) |
1000.0 |
|
| 4 (Grade, Type and Construction:) |
1000.0 |
|
| 5 (Sizes:) |
500.0 |
|
| 6 (Material:) |
1000.0 |
|
| custom (Density) |
1000.0 |
|
| custom (Shore hardness(D)) |
1000.0 |
|
| custom (Lead content(as per standard AAS method)) |
1200.0 |
|
| custom (Compressive strength- Paralllel) |
1500.0 |
|
| custom (Compression Test(Perpendicular)) |
1500.0 |
|
| custom (Tensile strength) |
4000.0 |
|
| 11.5 (Flexure Test-IS 4020 (Part 6):1998) |
1000.0 |
|
|
| 2922 |
National Test House (NER), Guwahati
| IS 3204 (1978) - Specification for limestone for chemical industry (First Revision) |
Specification for limestone for chemical industry (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 & 5.2.2 (Loss on ignition) |
1000.0 |
|
| 3.2 & 5.2.3 (Silica (as SiO2)) |
1000.0 |
|
| 3.2 & 5.2.4 (Iron (as Fe2O3)) |
1000.0 |
|
| 3.2 & 5.2.5 (Calcium (as CaO)) |
1000.0 |
|
| 3.2 & 5.2.9 (Alumina(Al2O3) and ferric oxide as (Fe2O3) together) |
2000.0 |
|
| 3.2 & 5.2.6 (Magnesium (as MgO)) |
1000.0 |
|
|
| 2923 |
National Test House (NWR), Jaipur
| Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products |
Methods of Sampling and Test for Paints, Varnishes and related products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2924 |
National Test House (ER), Kolkata
| IS 5986 (2017) - Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes |
Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Tensile Strength) |
2000.0 |
|
| 8 (Yield Stress) |
1000.0 |
|
| 0 (Mass of Zinc Coating as per IS 4759) |
2000.0 |
|
| 8 (Percentage Elongation) |
1000.0 |
|
| 9.2.2 (Bend Test) |
1500.0 |
|
| 10 (Impact Test) |
2000.0 |
|
| 15 (Dimension) |
1000.0 |
|
| 7 (Carbon) |
500.0 |
|
| 7 (Sulphur) |
500.0 |
|
| 7 (Phosphorus) |
500.0 |
|
| 7 (Carbon Equivalent) |
1000.0 |
|
| 7 (Manganese) |
500.0 |
|
| 7 (Silicon) |
500.0 |
|
| 7 (Chromium) |
1000.0 |
|
| 7 (molybdenum) |
1000.0 |
|
| 7 (Nickel) |
1000.0 |
|
| 0 (Uniformity of Coating as per Is 2633) |
1000.0 |
|
|
| 2925 |
National Test House (SR), Chennai
| Customer Specification-TNCSC - Cust Spfn for Polypropylene Multifilament Twine Y Cone |
Cust Spfn for Polypropylene Multifilament Twine Y Cone |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Visual Examination (as received)) |
250.0 |
|
| 2 (Breaking (Strength) Load, kg) |
2000.0 |
|
| 3 (Colour (Visual)) |
250.0 |
|
| 4 (Length) |
500.0 |
|
| 5 (Ply (Denier/Ply, on as received basis)) |
500.0 |
|
|
| 2926 |
National Test House (SR), Chennai
| IS 1199 (4) - Methods of sampling and analysis of concrete |
Methods of sampling and analysis of concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Cement content of hardened portland cement concrete, % by weight) |
5000.0 |
|
| Custom (Cement : Sand ratio by weight (considering the submitted mortar sample contains Sand & OPC only)) |
1000.0 |
|
|
| 2927 |
National Test House (NR), Ghaziabad
| 7098(Part-2):2011,Reaffirmed 2021 - crosslinked polyethylene insulated thermoplastic sheathed cables for working voltages from 3.3 kv up to and including 33 kv |
crosslinked polyethylene insulated thermoplastic sheathed cables for working voltages from 3.3 kv up to and including 33 kv |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 19.1,Sl.No.(i)(b) (Tensile test (for aluminium):Test on Conductor) |
1000.0 |
|
| 19.1,Sl.No.(i)(c) (Wrapping test (for aluminium):Test on conductor:) |
500.0 |
|
| 19.1,Sl.No.(i)(d) (Resistance test::Test on conductor) |
2000.0 |
|
| 19.1,Sl.No.(ii) (Test for armouring wires/formed wires) |
1500.0 |
|
| 19.1,Sl.No.(iii)(a) (Tensile strength:Physical test for insulation) |
750.0 |
|
| 19.1,Sl.No.(iii)(a) (Elongation at break:Physical test for insulation) |
750.0 |
|
| 19.1,Sl.No.(i)(d) (Resistance test::Test on conductor) |
2000.0 |
|
| 19.1,Sl.No.(iii)(a) (Tensile strength:Physical test for insulation) |
750.0 |
|
| 19.1,Sl.No.(iii)(a) (Elongation at break:Physical test for insulation) |
750.0 |
|
| 19.1,Sl.No.(vi)(a) (Tensile strength:Physical test for outer sheath) |
750.0 |
|
| 19.1,Sl.No.(vi)(a) (Elongation at break:Physical test for outer sheath) |
1.0 |
|
| 19.1,Sl.No.(iii)(b) (Tensile strength variation:Physical test for insulation) |
1000.0 |
|
| 19.1,Sl.No.(iii)(b) (Elongation variation:Physical test for insulation) |
1000.0 |
|
| 19.1,Sl.No.(iii)(b) (Tensile strength after ageing) |
- |
|
| 19.1,Sl.No.(iii)(b) (Elongation at break after ageing) |
- |
|
| 19.1,Sl.No.(iii)(b) (Tensile strength after ageing) |
- |
|
| 19.1,Sl.No.(iii)(b) (Elongation at break after ageing) |
- |
|
| 19.1,Sl.No.(iii)(b) (Tensile strength variation:Physical test for insulation) |
1000.0 |
|
| 19.1,Sl.No.(iii)(b) (Elongation variation:Physical test for insulation) |
1000.0 |
|
| 1 () |
- |
|
| 1 (1) |
- |
|
| 1 (1) |
- |
|
| 19.1,Sl.No.(iii)(d) (Hot Set:Physical test for insulation) |
1000.0 |
|
| 19.1,Sl.No.(iii)(e) (Shrinkage:Physical test for insulation) |
500.0 |
|
| 19.1,Sl.No.(vi)(b) (Elongation at break after ageing:Physical test for outer sheath) |
750.0 |
|
| 19.1,Sl.No.(vi)(b) (Tensile strength variation after ageing:Physical test for outer sheath) |
750.0 |
|
| 19.1,Sl.No.(vi)(b) (Elongation variation after ageing:Physical test for outer sheath) |
- |
|
| 19.1,Sl.No.(vi)(b) (Tensile strength after ageing:Physical test for outer sheath) |
- |
|
| 19.1,Sl.No.(vi)(c) (Shrinkage:Physical test for outer sheath) |
500.0 |
|
| 19.1,Sl.No.(vi)(d) (Depth of Indentation(Hot Deformation Test):Physical test for outer sheath) |
500.0 |
|
| 19.1,Sl.No.(vi)(e) (Loss of mass in air oven:Physical test for outer sheath) |
1000.0 |
|
| 19.1,Sl.No.(vi)(a) (Thermal stability:Physical test for outer sheath) |
1000.0 |
|
| 19.1,Sl.No.(xi) (Insulation resistance (volume resistivity at 27 Deg C) test) |
1000.0 |
|
| 19.1,Sl.No.(xi) (Insulation resistance (volume resistivity at 90 DegC) test) |
1000.0 |
|
| 19.1,Sl.No.(xiv) (High Voltage Test) |
2000.0 |
|
| 19.1,Sl.No.(xv) (Flammability test for PVC sheathed cables) |
500.0 |
|
| 19.1,Sl.No.(iv) (Test for thickness of insulation (eccentricity)) |
100.0 |
|
| 19.1,Sl.No.(iv) (Test for thickness of sheath) |
100.0 |
|
| 19.1,Sl.No.(vi)(f) (Heat Shock) |
500.0 |
|
| 19.1,Sl.No.(ii) & Cl.7 (Dimension Test on Armour Wire) |
- |
|
| 19.1,Sl.No.(ii) & Cl.8.1 (Tensile Strength Test on Armour Wire) |
- |
|
| 19.1,Sl.No.(ii) & Cl.8.1 (% Elongation Test on Armour Wire) |
- |
|
| 19.1,Sl.No.(ii) & Cl.8.2 (Torsion Test on Armour Wire) |
- |
|
| 19.1,Sl.No.(ii) & Cl.8.4 (Resistance Test on Armour Wire) |
- |
|
| 19.1,Sl.No.(ii) & Cl.9.1 (Mass of Zinc Coating on Armour Wire) |
500.0 |
|
| Tests (Tests) |
17000.0 |
|
| Tests (Tests) |
28000.0 |
|
| Tests (i) Test on conductor: a) Tensile test (for aluminium) b) Wrapping test (for aluminium) c) Resistance test ,ii) Test for armouring wires/formed wires, iii) Physical test for insulation: a) Tensile strength and elongation at break ,b) Ageing in air oven ,d) Hot set test , e) Shrinkage test ,f) Water absorption test (gravimetric) ,iv) Test for thickness of insulation (eccentricity) and sheath ,vi) Physical test for outer sheath: a) Tensile strength and elongation at break , b) Ageing in air oven ,c) Shrinkage test ,d) Hot deformation , e) Loss of mass in air oven , f) Heat shock ,g) Thermal stability ,xi) Insulation resistance (volume resistivity,xv) Flammability test for PVC sheathed cables) |
28500.0 |
|
| Additional Core (--) |
2000.0 |
|
| Additional Core (---) |
4000.0 |
|
| Additional Core (---) |
6000.0 |
|
| Fire Properties (---) |
55000.0 |
|
| Acceptance Tests ({b) Tensile test (for aluminium), c) Wrapping test (for aluminium), d) Conductor resistance tests, e) Test for thickness of insulation (eccentricity) and sheath, f) Hot set test for insulation, g) Tensile strength and elongation at break test for insulation and outer sheath and k) Insulation resistance (volume resistivity) test}) |
12000.0 |
|
| Tests (i) Test on conductor: c) Resistance test iii) Physical test for insulation: a) Tensile strength and elongation at break ,b) Ageing in air oven ,d) Hot set test , e) Shrinkage test ,f) Water absorption test (gravimetric) ,iv) Test for thickness of insulation (eccentricity) and sheath ,vi) Physical test for outer sheath: a) Tensile strength and elongation at break , b) Ageing in air oven ,c) Shrinkage test ,d) Hot deformation , e) Loss of mass in air oven , f) Heat shock ,g) Thermal stability ,xi) Insulation resistance (volume resistivity,xv) Flammability test for PVC sheathed cables) |
19500.0 |
|
| Acceptance Tests (d) Conductor resistance tests, e) Test for thickness of insulation (eccentricity) and sheath, f) Hot set test for insulation, g) Tensile strength and elongation at break test for insulation and outer sheath and k) Insulation resistance (volume resistivity) test}) |
10500.0 |
|
| Test (Weight of the Conductor) |
3000.0 |
|
| Test (Percentage Armor Coverage Test) |
1000.0 |
|
|
| 2928 |
National Test House (WR), Mumbai
| IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12 (12.1.2 Of IS:9537-Part I Insulation Resistance) |
2000.0 |
|
| 12.1 (12.1.1 of IS:9537-Part I Electrical Strength) |
2000.0 |
|
| 7 (Verification of dimensions with gauges of conduit pipe and Checking of dimensions of the socket end) |
2000.0 |
|
| 7.4 (Uniformity of Wall Thickness) |
- |
|
| 9.2 (Bending Test at room temperature) |
2000.0 |
|
| 9.3 (Compression Test) |
2000.0 |
|
|
| 2929 |
National Test House (ER), Kolkata
| Custom Scool Bag Test NTH(ER)-2022 (2022) - Custom Scool Bag Test NTH(ER)-2022 |
Custom Scool Bag Test NTH(ER)-2022 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Front Length) |
500.0 |
|
| 1.1 (Width) |
500.0 |
|
| 1.2 (Bottom) |
500.0 |
|
| 1.3 (Cloth) |
500.0 |
|
| 1.4 (Front Pocket Size) |
500.0 |
|
| 1.5 (Front Pocket Bottom width) |
500.0 |
|
| 1.6 (No. of water Bottle) |
500.0 |
|
| 1.7 (Water bottle size with elastic) |
500.0 |
|
| 1.8 (Zip Nos.) |
500.0 |
|
| 1.9 (Runners) |
500.0 |
|
| 1.10 (shoulder pads) |
500.0 |
|
| 1.11 (Clips) |
500.0 |
|
| 1.12 (Handle) |
500.0 |
|
| 1.13 (Partition Cloth) |
1000.0 |
|
| 1.14 (Nawar) |
1000.0 |
|
| 1.15 (Logo & Photo) |
500.0 |
|
| 1.16 (Drop Test) |
1000.0 |
|
| 1.17 (Snatch Test) |
1000.0 |
|
| 1.18 (GSM of Fabric) |
1000.0 |
|
|
| 2930 |
National Test House (SR), Chennai
| IS 2645 (2003) - Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision) |
Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3.b (Compressive Strength-7days) |
2000.0 |
|
| 3.3.a (Compressive Strength-3 days) |
2000.0 |
|
| 3.2.b (Setting Time (Final Setting Time)) |
500.0 |
|
| 3.2.a (Setting Time (Initial Setting Time)) |
500.0 |
|
| 3.4 (Chloride Content, %) |
1000.0 |
|
|
| 2931 |
National Test House (NR), Ghaziabad
| Customer Specified - Specification |
Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Power Factor Measurement) |
3000.0 |
|
| Clause No.10 (Measurement of Power Input(The Carried out on the lines of Clause No.7 of IS 16103(part-2):2012) |
3000.0 |
|
| As per Bank GTP. (Verification of Functional checks on Note Authentication or cum sorting Machine with 1+1) |
35000.0 |
|
| As per Bank GTP. (Verification of Functional checks on Note Authentication or cum sorting Machine with 2+1) |
40000.0 |
|
| 8.2 (Railway Signalling Cable) |
131000.0 |
|
| 8.2 (Underground Railway Jelly Filled Telecom Quad Cable for signalling and Telecom) |
101500.0 |
|
| Test1 (Test for overall dimension and thickness of insulation/sheath, Tensile strength for insulation(Before & After Ageing), Loss of mass test for insulation & Sheath, Hot deformation test for insulation & Sheath and Thermal stability test for insulation & Sheath) |
13500.0 |
|
| Relevant Clauses of IS 1475(Part-1) (Marking,Maximum operating conditions, Cooling capacity rating test, High Voltage Test, Insulation Resistance and components and their materials.) |
30000.0 |
|
| Central Vista project (Test3) |
26000.0 |
|
| IS 3854 (Tests) |
10000.0 |
|
| Clause 17.1 (i)(b),(ii),(iii) (Conductor resistance test,Test for armouring wires and Tests for thickness of insulation and sheath.) |
9000.0 |
|
| Test7 (High Voltage Test) |
4000.0 |
|
| Scientist Visiting Charges (---) |
10000.0 |
|
| 14255 (Acceptance Tests) (Tests) |
16500.0 |
|
| IS 555:1979,Reaffirmed Year : 2020,Amendment No.2 (Electric Wall Mounted Fan) (Insulation Resistance) |
2500.0 |
|
| Smoke Density Test (Test) |
40000.0 |
|
| Kolkata Custom (Visula Inspection/Verification) |
10000.0 |
|
| Test13 (Tests) |
6500.0 |
|
| IEC 60898(Part-1):2015 (i)Resistance to Abnormal Heat and to Fire(9.15) and ii)Measurement of Temperature Raise (Cl.9.8.2)) |
16000.0 |
|
| IS 1293 (Tests) |
10000.0 |
|
| Test (Tests) |
60660.0 |
|
| Witness (Tests) |
- |
|
| Test16 (Tests) |
36000.0 |
|
| Test16 (Tests) |
12000.0 |
|
| Test17 (Tests) |
27000.0 |
|
| Test17 (Tests) |
30500.0 |
|
| Test18 (Tests) |
26000.0 |
|
| Test19 (Type Tests) |
47200.0 |
|
| Test20 (Tests) |
27000.0 |
|
| ILC Test-NN (ILC Tests) |
- |
|
| ILC Tests-NL (ILC Tests) |
- |
|
| Test (Tests) |
10000.0 |
|
| Tests (Tests at Clause Numbers 5.6.1,5.6.2,5.7,5.8.1,2.8.2,5.8.5(ii),5.8.6,5.9,5.10.1(ii),5.10.2,5.10.3, 5.10.4,5.10.10,5.10.11, 5.11, 5.12.1,5.13.1,5.14.1,5.14.2 and 5.15,4.2 of IRS S:63/2014(Rev 4.0).) |
130500.0 |
|
| Tests (Tests as per Clause Numbers 5.5,5.6,5.7,5.8.2,5.8.3,5.8.4,5.8.10,5.8.11,5.8.14,5.8.15,5.9.1,5.9.2,5.9.2.3 and 5.9.3 of IRS TC:30-2005(Ver-1),Amendment No.4.) |
100500.0 |
|
| Tests (Tests at Clause Numbers 5.6.1,5.6.2,5.7,5.8.1,2.8.2,5.8.5(ii),5.8.6,5.9,5.10.1(ii),5.10.2,5.10.3,
5.10.4,5.10.10,5.10.11,5.11,5.12.1,5.13.1,5.14.1,5.14.2 and 5.15,4.2 of IRS S:63/2014(Rev 4.0).) |
40500.0 |
|
| Tests (Tests as per Cl.Nos.5.6.1,5.6.2,5.7,5.8.1,2.8.2,5.8.5(ii),5.8.6,5.9,5.10.1(ii),5.10.2,5.10.3,5.10.4, 5.10.10, 5.10.11,5.11,5.12.1,5.13.1,5.14.1,5.14.2,5.15,4.2 as per IRS S:63/2014(Rev 4.0).) |
70500.0 |
|
| DMRC (DMRC Tests) |
152500.0 |
|
| DMRC (DMRC Tests) |
150500.0 |
|
| DMRC (DMRC Tests) |
146500.0 |
|
| Test (Test) |
1500.0 |
|
| Verification of Functional checks (Verification of Functional checks on Note sorting Machine,2+1 as per Customer GTP) |
40000.0 |
|
| Verification of Functional checks (Verification of Functional checks on Note sorting Machine,1+1 as per Customer GTP) |
35000.0 |
|
| Verification of Functional checks (Verification of Functional checks on Note sorting Machine,4+1 as per Customer GTP) |
50000.0 |
|
| Verification of Functional checks (Verification of Functional checks on Note sorting Machine,4+2 as per Customer GTP) |
50000.0 |
|
| Verification of Functional checks (Verification of Functional checks on Authentication cum Value Counting Machines as per Customer GTP) |
35000.0 |
|
| Scientist Visiting Charges (---) |
5000.0 |
|
| 13.4 of IEC 60529. (Dust test for first characteristic numeral 6) |
10000.0 |
|
| Sl.No(i)(b) of Cl10.1 (Breaking Load Test on Messenger Conductor) |
1500.0 |
|
| Test (Total harmonic distortion) |
3000.0 |
|
| Scientist Witness Charges (----) |
5000.0 |
|
| Tests as per IS 14772:2000 (Dimensions, Protection against Electric Shock and Provision for Earthing) |
3000.0 |
|
| Electric Iron:IS 302 (Part 2/Sec 3): 2007 (Leakage Current Test) |
1000.0 |
|
| Fan:IS 302 (Part 2/Sec 80): 2017 (Leakage Current Test) |
1000.0 |
|
| Tests (Resistance (pair)) |
4000.0 |
|
| Tests (Insulation Resistance and Flammability) |
4500.0 |
|
| Tests as per TIA/IS. (Tests) |
40000.0 |
|
| Glow Wire Test (Glow Wire Test) |
2000.0 |
|
|
| 2932 |
National Test House (ER), Kolkata
| IS 4000 (1992) - Code for practice for High strength bolts in steel structures |
Code for practice for High strength bolts in steel structures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4.1 (Slip Factor - Surface Not Treated - consideration of 3 Specimens) |
18000.0 |
|
|
| 2933 |
National Test House (SR), Chennai
| IS 4351 (2003) - STEEL DOOR FRAMES — SPECIFICATION |
STEEL DOOR FRAMES — SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Height) |
1000.0 |
|
| 6 (Width) |
1000.0 |
|
|
| 2934 |
National Test House (SR), Chennai
| IS 432 : Part 1 (1982) - Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Dimensions) |
600.0 |
|
| 6 (Mass per meter) |
600.0 |
|
|
| 2935 |
National Test House (Satellite Centre), Varanasi
| IS 5405 (2019) - Sanitary napkins – Specification (second revision) |
Sanitary napkins – Specification (second revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Dimensions / Sizes) |
500.0 |
|
| 5 (Pad Length (Absorbent core only)) |
1000.0 |
|
| 5 (Pad width (Absorbent core only)) |
1000.0 |
|
|
| 2936 |
National Test House (SR), Chennai
| IS 9926 (1981) - SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS |
SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Visual examination) |
- |
|
| 7.2 (Dimension: Diameter of the Wire) |
1000.0 |
|
| 7.3 (Resistance test: Calculated resistance corrected to 20°C) |
3000.0 |
|
| 7.0 (Acceptance test) |
3000.0 |
|
|
| 2937 |
National Test House (Satellite Centre), Varanasi
| IS 14252 (2015) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Ash Content) |
2000.0 |
|
| 4 (Picks/dm) |
500.0 |
|
| 4 (Ends/dm) |
500.0 |
|
| 4 (Dimensions, Outside Width) |
500.0 |
|
| 4 (Dimensions, Outside Length) |
500.0 |
|
| 3.4.1 (Bottom Seam, Two row separation distance) |
2000.0 |
|
| 3.4.1 (Bottom Seam, Number of Stitchs per dm) |
2000.0 |
|
|
| 2938 |
National Test House (SR), Chennai
| WI Calibration (ECE) (0) - Calibration - Electrical |
Calibration - Electrical |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 0 (Digital Multimeter Calibration of, V I R (3 ½ digit)) |
1000.0 |
|
| 0 (Calibration of Temperature Indicator (5 points) with simulation method temperature upto 300 deg C) |
700.0 |
|
| 0 (Digital Multimeter Calibration of, V I R (3 ½ digit)) |
1000.0 |
|
| 5 Stopwatch (Time Parameter Calibration in Seconds) |
1200.0 |
|
|
| 2939 |
National Test House (ER), Kolkata
| Customer Specification NTH ER Paint QUV 2022 (2022) - Customer Specification NTH ER Paint QUV Test 2022 |
Customer Specification NTH ER Paint QUV Test 2022 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (UV exposure test (for 08 Hrs)
Irradiance:0.63W/m2 Temp :60 Deg) |
3500.0 |
|
| 2 (Temperature Durability test for 16 hrs.
(08 Hours at minus 30 Deg C followed by 08 Hours at plus 70 deg C)) |
10000.0 |
|
|
| 2940 |
National Test House (WR), Mumbai
| IS 14933 (2001) - High Pressure Fire Fighting Hose -Specification |
High Pressure Fire Fighting Hose -Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Cover) |
1000.0 |
|
| 8 (Lining) |
1000.0 |
|
| 7 (Reinforcement) |
1000.0 |
|
| 16 (Change in Diameter, %) |
1000.0 |
|
| 15 (Accelerated ageing test- Adhesion test) |
2000.0 |
|
| 15 (Accelerated ageing test -Hydrostatic burst pressure test) |
5000.0 |
|
| 15 (Accelerated ageing test -Appearance) |
1000.0 |
|
| 14 (Abrasion Resistance) |
2000.0 |
|
| 12 (Kink Test) |
2000.0 |
|
| 13 (Adhesion test) |
2000.0 |
|
| 11 (Hydrostatic Burst Pressure Test) |
5000.0 |
|
| 10 (Hydrostatic Proof Pressure Test) |
5000.0 |
|
| 16 (Change in length, %) |
1000.0 |
|
| 6 (Coil diameter, cm) |
1000.0 |
|
| 4 (Length, m) |
1000.0 |
|
| 3.4 (Internal Diameter, mm) |
1000.0 |
|
| 5 (Mass per meter length, g) |
1000.0 |
|
| 17.2 (Oil Resistance- Adhesion Test) |
2000.0 |
|
| 17.3 (Heat Resistance) |
2000.0 |
|
| 17.2 (Oil Resistance- Visual Examination) |
1000.0 |
|
|
