NTH - Management Information System

Search by Standard No.

Reset

3865 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2941

National Test House (NR), Ghaziabad

IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Neutral Salt Spray (96 hrs.))	8000.0

2942

National Test House (NR), Ghaziabad

IS 73 (2013) - Paving bitumen - Specification (Fourth Revision)

Paving bitumen - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(vii)a (Viscocity ratio 60dg)	1200.0
6.2(vi) (Softening Point (R&B))	1200.0
6.2(iv) (Flash Point, cleveland Open cup)	1200.0
6.2(v) (Solubility in TCE)	1200.0
6.2(iii) (Kinematic viscocity,135 dg)	1200.0
6.2 (i) (Penetration,25 dg 100g 5sec 0.1 mm)	1200.0
6.2(vii)b (Ductility dg)	1200.0

2943

National Test House (NR), Ghaziabad

IS 101 : Part 8 : Sec 5 2022 (2022) - Methods of sampling and test for paints, varnishes and related products: Part 8 tests on liquid paints (General And Physical): Sec 5 Lead Restriction Test

Methods of sampling and test for paints, varnishes and related products: Part 8 tests on liquid paints (General And Physical): Sec 5 Lead Restriction Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
101 part 8 sec 5 (Lead Restriction Test)	2500.0

2944

National Test House (NR), Ghaziabad

IS 1367 : Part 6 (2018) - Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Lead, % by mass)	500.0
6 (Chemical composition, % by mass)	2500.0

2945

National Test House (NR), Ghaziabad

IS 1367 : Part 3 (2017) - Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical Composition, % by mass)	2500.0
6 (Vanadium, % by mass)	500.0
6 (Molybdenum, % by mass)	500.0
6 (Nickel, % by mass)	500.0
6 (Chromium, % by mass)	500.0
6 (Lead, % by mass)	500.0
9.1.4 (Wedge Load test as per IS 1367 Part 3)	3000.0
1.2 (Uniformity of Zn coating)	1000.0
1.1 (Mass of Zinc Coating)	2000.0
9.7.1b (Percentage Elongation after fracture on Machined test piece, %.)	1000.0
9.7.1a (Yield Strength on Machined test piece, MPa.)	1000.0
9.7.1 (Tensile Strength on Machined test piece, MPa.)	1000.0
7 (Mechanical and physical properties (Hardness,Vickers))	2000.0
7 (Mechanical and physical properties (Proof load test))	2000.0
6 (Chemical Composition, % by mass)	2500.0
0 (Shear Strength Test)	3000.0
6 (Silicon)	500.0
6 (Manganese)	500.0
2 (Dimensions)	1000.0

2946

National Test House (NR), Ghaziabad

ASTM B117 - Salt spray for 3000 hrs ASTM B117

Salt spray for 3000 hrs ASTM B117

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM B 117 (Salt Fog Test 5% Nacl solution(for 96 hrs) ASTM 117B/IEC 60512-11-6 AS PER CLAUSE NO. 7.4.9 FOR INTER VEHICULAR COUPLER UNIT 500AMP AS PER RDSO SPEC. NO. RDSO/PE/SPEC/AC/0177-(REV-01)-2013)	5000.0
ASTM D 3359 (Cross Cut Test on Painted or Coated Specimen)	2000.0
ASTM B 117 (Salt Fog Test 5% Nacl solution(for 96 hrs) ASTM 117B/IEC 60512-11-6 AS PER CLAUSE NO. 7.4.9 FOR INTER VEHICULAR COUPLER UNIT 500AMP AS PER RDSO SPEC. NO. RDSO/PE/SPEC/AC/0177-(REV-01)-2013)	5000.0
ASTM D 3359 (Cross Cut Test on Painted or Coated Specimen)	2000.0

2947

National Test House (NR), Ghaziabad

ASTM D6637 (2015) - Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Method-A (Tensile Strength)	1500.0
Method-A (Elongation at break)	1500.0
Firm's Requirement (Secant Modulus)	2000.0

2948

National Test House (WR), Mumbai

A118.3 (1999) - American National Standard Specification for Chemical Resistant Water Cleanable Tile Setting Grouting Epoxy / Epoxy Adhesive

American National Standard Specification for Chemical Resistant Water Cleanable Tile Setting Grouting Epoxy / Epoxy Adhesive

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
E 5.1 (Test for Water Cleanability (Cl E-5.1, ANSI A118.3))	2000.0
E-5.2 (Setting Time and Service Time (Cl E-5.2, ANSI A 118.3))	2000.0
E-5.3 (Test for Shrinkage (Cl E-5.3, ANSI A118.3))	1000.0
E-5.4 (Test for Sag in Vertical Joints (cl 5.4, ANSI A 118.3))	4000.0
E-5.5 (Test for Bond Strength to Quarry Tile (Cl. E-5.5, ANSI A118.3))	9000.0
E-5.6 (Test for Compressive Strength of the cured material (ASTM C 579))	4000.0
E-5.7 (Test for Tensile Strength of the cured material (ASTM C 379))	4000.0
E-5.8 (Test for Thermal Shock (Cl. E-5.8, ANSI A 118.3)))	6000.0
ASTM (Mix Density)	1000.0
Manufacturer Specification (Pot Life (Manufacturer Specified method))	1000.0
Manufacturer Specification (Resistance to intermitted upto 70 Deg C.)	2000.0
ANSI A118.4, H-4.4 (Water Absorption Test (on the lines of ANSI A118.6, Cl. H-4.4))	2000.0

2949

National Test House (NR), Ghaziabad

AASHTO T 166 (2021) - AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
AASHTO T 166 (Bulk specific gravity)	2000.0

2950

National Test House (WR), Mumbai

EN / ASTM - Flexible Sheet for Water Proofing / Modified Bituminous sheet materials

Flexible Sheet for Water Proofing / Modified Bituminous sheet materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
EN 1849-2: 2019, Clause 5 (Thickness (EN 1849-2: 2019, Clause 5), mm)	1000.0
EN 1849-2: 2019, Clause 6 (Mass per Unit area (EN 1849-2: 2019, Clause 6), g/Sq.m)	1000.0
EN 12311-1: 1999, Clause 1-10 (Tensile Force (EN 12311-1: 1999, Clause 1-10), N/5cm)	2000.0
EN 12311-1: 1999, Clause 1-10 (Elongation (EN 12311-1: 1999, Clause 1-10), %)	2000.0
ASTM D5147-14 Clause No. 12 (Low Temperature Flexibility (ASTM D5147-14 Clause No. 12), Visual)	2000.0
ASTM D5147-14 Clause No. 8 (Tear Strength (ASTM D5147-14 Clause No. 8), N)	4000.0
ASTM D5147-14 Clause No. 16 (High Temperature Stability (ASTM D5147-14 Clause No. 16), °C)	1000.0
ASTM D5602-11 Clause No. 1-11 (Puncture Resistance (ASTM D5602-11 Clause No. 1-11), Visual)	2000.0
ASTM D36-14 Clause No. 1-12 (Softening point Of Bitumen (ASTM D36-14 Clause No. 1-12), °C)	1500.0
ASTM D5147-14 Clause No. 11 (Dimensional Stability(ASTM D5147-14 Clause No. 11), %)	2000.0

2951

National Test House (NWR), Jaipur

IS 1608 : Part 1 (2018) - Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Tensile Test with sample preparation)	4000.0
14 (Tensile Test without sample preparation)	3000.0
1 ()	-
0 (Mechanical Tests)	5000.0
0 (Bend Test)	2000.0

2952

National Test House (NR), Ghaziabad

MORTH : Part 5 (2013) - SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4,5.2&4.2.1 (Combined BITUMEN CONTENT of each specimens)	6000.0
505 (Density / Bulk Specific Gravity of DBM (AASHTO T 166))	2000.0
507 (Density / Bulk Specific Gravity of BC ( AASHTO T 166 (21)),)	2000.0
505 (Binder Content of DBM, in %)	3000.0
507 (Bitumen Content of BC, in %)	3000.0
CLAUSE-1,Table-1 (Cutting & Preparation of Core sample-Single Stage)	1000.0
505 (Density of DBM Layer-I (Grade-I))	2000.0
505 (Density of DBM Layers-II (Grade-II))	2000.0
Misc (Density of SMA Bituminous Core.)	2000.0
Clause 1 Table 1 (Cutting & Preparation of Core sample -Double Stage)	1000.0
505 (Binder Content of DBM Layers -I, %)	3000.0
505 (Binder Content of DBM Layers-II, %)	3000.0
Misc (Binder Content of SMA Bituminous Core, %)	3000.0
Thickness of core (Thickness of core)	1000.0
Density DAC (Density of Dense Asphaltic Concrete.)	2000.0
Density of SDAC (Density of Semi Dense Asphaltic Concrete)	2000.0
Binder Content DAC (Binder content of Dense Asphaltic Concrete)	3000.0
Binder Content of SDAC (Binder content of Semi Dense Asphaltic Concrete)	3000.0

2953

National Test House (ER), Kolkata

IS 4351 (2003) - STEEL DOOR FRAMES — SPECIFICATION

STEEL DOOR FRAMES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimensions)	2000.0

2954

National Test House (NR), Ghaziabad

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Proof Load)	3000.0
7 (Hardness Test)	2000.0
6 (Carbon, % by mass)	500.0
6 (Phosphorus, % by mass)	500.0
6 (Sulphur, % by mass)	500.0
6 (Manganese, % by mass)	500.0
7 (Surface Integrity)	1200.0
0 (Mass of Zinc Coating)	2000.0
0 (Uniformity of coating)	1000.0
1.1 (Dimensions)	1500.0

2955

National Test House (NR), Ghaziabad

IS 1367 : Part 3 (2017) - Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Tensile load, N.)	3000.0
7 (Proof Load, N.)	3000.0
7 (Hardness Test)	2000.0
5 (Surface Integrity)	1200.0
6 (Carbon, % by mass)	500.0
6 (Phosphorus, % by mass)	500.0
6 (Sulphur, % by mass)	500.0
6 (Boron, % by mass)	625.0
9.14 (Impact Strength at (-) 20⁰C)	5000.0
1 (% Reduction in Area)	1000.0
2 (Uniformity test)	1000.0
3 (Mass of Zinc Coating)	2000.0
4 (Dimensions of the Bolts)	2000.0
9.7.1 (Tensile Strength on Machined Test Piece, MPa.)	1000.0
9.7.1a (Yield Strength on Machined Test Piece, MPa.)	1000.0

2956

National Test House (ER), Kolkata

Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060

Method of Test for Paper on the lines of IS 1060

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0

2957

National Test House (SR), Chennai

IS 8887 (2018) - Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2&6.2 v (Particle charge)	1500.0
4.2&6.2 viii (Miscibility with water)	1200.0
4.2&6.2 ix 2 (Tests on residue: Penetration 25dg/100g/5sec)	1200.0
4.2&6.2 ix 3 (Tests on residue: Ductility 27°C/cm)	1200.0
4.2&6.2 ix 4 (Tests on residue: Solubility I tricholoethylene,)	1200.0
4.2&6.2 ix 1 (Tests on residue: Residue by evaporation)	1200.0
4.2&6.2 iv (Storage stability after 24 hr)	1200.0
4.2&6.2 i (Residue on 600 micron IS seive)	1200.0

2958

National Test House (ER), Kolkata

IS 2214 : 1977 (1977) - Specification for Silver Nitrate , Pure and analytical Reagent

Specification for Silver Nitrate , Pure and analytical Reagent

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Silver Nitrate ( AgNO3) Percent/Mass)	2000.0

2959

National Test House (WR), Mumbai

Custom ASTM / IS - Non Shrinking Grouts / Mortar - Method of Test ASTM / IS

Non Shrinking Grouts / Mortar - Method of Test ASTM / IS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM C 1006 (Test for Tensile Splitting Strength (Tensile Splitting Strength after 28 days), N/mm^2)	4000.0
ASTM C 531 (Test for Coefficient of Linear Thermal Expansion, mm/mm/Deg C ( on the lines of ASTM C 531))	2000.0
Manufacture Specified (Pot Life, in minutes (as per manufacturer specification).)	1000.0
ASTM (Density (Dry Loose Bulk Density/Dry Compacted Density/Wet Mix Density))	2000.0
ASTM C 881 (Test for Slant Shear Strength (14 Days), N/mm^2)	4000.0
ASTM D 7234 (Test for Pull Out Adhesion Strength (28 Day Strength), N/mm^2 [ASTM D 7234])	5000.0
ASTM D 7234 (Test for Pull Out Adhesion Strength (7 Day Strength), N/mm^2 [ASTM D 7234])	5000.0
ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307])	4000.0
ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307])	4000.0
ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348])	4000.0
ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348])	4000.0
ASTM C 109 (Test for Compressive Strength (28 Day Compressive Strength), N/mm^2 [ASTM C 109])	4000.0
ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109])	4000.0
ASTM C 109 (Test for Compressive Strength (3 Day Compressive Strength), N/mm^2 [ASTM C 109])	4000.0
ASTM C 109 (Test for Compressive Strength (1 Day Compressive Strength), N/mm^2)	4000.0
IS 4031 (Part 10) (Drying Shrinkage Test, Drying Shrinkage (on lines of IS 4031 -Part 10))	1000.0
Cl 7 of ASTM C 496 (Splitting Tensile Strength after 28 days, N/mm^2 (on the lines of ASTM C 496 : 2004))	4000.0
ASTM (Compacted Bulk Density, kg/m^3)	1000.0
ASTM C 293 (Test for Flexural Strength (on the lines of ASTM C 293 - 02 with sample preparation),)	9000.0
ASTM C 293 (Test for Flexural Strength (on the lines of ASTM C 293 - 02 with sample preparation),)	9000.0
ASTM C 293 (Test for Flexural Strength (on the lines of ASTM C 293 - 02 on prepared samples),)	4000.0
ASTTM C 293 (Test for Flexural Strength (on the lines of ASTM C 293 - 02 with sample preparation) after 14 days, N/mm^2)	9000.0
ASTM C 109 (Test for Compressive Strength (on the lines of ASTM C 109) after 14 days, N/mm^2)	4000.0
Cl 7 of ASTM C 496 (Splitting Tensile Strength after 28 days, N/mm^2 (on the lines of ASTM C 496 : 2004))	4000.0
- - (Test for Flexural Strength after 28 days (on the lines of ASTM C 78), N/mm^2)	4000.0
- - (Test for compressive strength after one day, N/mm^2)	4000.0
- - (Test for compressive strength, 28 days, in N/mm^2)	4000.0
- - (Test for Tensile Strength (Split) after 28 days (on the lines of ASTM C 496), N/mm^2)	4000.0
8 (Tensile Strength (on lines of ASTM C 307))	4000.0
6 (Bulk Density [Tapped] (on the lines of ASTM C 138))	500.0
6 (Bulk Density [Untapped] (on the lines of ASTM C 138))	500.0
6 (Fresh Wet Density (on the lines of ASTM C 138))	500.0
7 (Flow at 0 minutes (on the lines of ASTM C 1437))	500.0
7 (Flow after 20 minutes (on the lines of ASTM C 1437))	500.0
5 (Dry Bulk Density of cured specimen (on the lines of ASTM C 642))	500.0
5 (Water Absorption after immersion at 27 Deg C for 48 hours (on the lines of ASTM C 642))	1000.0
9 (Expansion after 7 days (on the lines of ASTM C 1090))	1000.0
9 (Expansion after 28 days (on the lines of ASTM C 1090))	1000.0
11 (Slant Shear Strength (on the lines of ASTM C 882))	4000.0
- - (Appearance)	500.0
8 (Linear Shrinkage, in percent (on the lines of ASTM C 531))	2000.0
ASTM C 531 (Test for Coefficient of Linear Thermal Expansion, mm/mm/Deg C ( on the lines of ASTM C 531))	2000.0
- - (Cement and sand content, in %)	5000.0

2960

National Test House (ER), Kolkata

IS 15489 : 2013 NTH ER (2013) - PAINT, PLASTIC EMULSION — SPECIFICATION

PAINT, PLASTIC EMULSION — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Composition)	700.0
6.2 (Conditions in the Container)	600.0
6.3 (Thinning)	600.0
6.4 (Application Properties)	600.0
6.5 (Mass in kg/10 litre)	700.0
6.6 (Opacity)	700.0
6.7 (Fastness to Light (Xenon Arc apparatus for 500 hrs))	25000.0
6.8 .1.1 (C-2 Durability Test (Normal Outdoor Exposure Test 12 Months ) for Exterior Use Only)	10000.0
6.8 1.2 &6.8.2 (C-3 Durability Test ACCELERATED WEATHERING TEST Accelerated Weathering Apparatus QUV for 21 days UV condensation type)	18000.0
6.9 (Lead Restriction)	700.0
6.10 (Keeping Properties (For 12 months))	5000.0
6.11 (i) Table 1 (Consistency)	700.0
6.11(ii) Table 1 (Drying time, a) Surface Dry)	400.0
6.11(ii) Table 1 (Drying time b) Hard dry)	400.0
6.11 (iii) Table 1 (Finish)	700.0
6.11 (iv) (Gloss at 60 Deg. Angle)	700.0
6.11(v) Table 1 (Colour)	300.0
6.11(vii) Table 1 (Resistance to alkali)	700.0
6.11 (viii) Table 1 (Washability and cleanability)	700.0
6.11 (x) Table 1 (Recoating properties)	200.0
6.12.2 Specific requirements VOC (Volatile Organic Compounds (VOC) % by mass)	2400.0
6.12 .2 Toxic metals (toxic metals such as lead, cadmium, chomium (VI) and their compounds)	2400.0
3.1.1 (Volatile Organic Compound (gm/litre))	3000.0

2961

National Test House (NR), Ghaziabad

IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite

Polished Building Stones: Part 1 Granite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Specific gravity)	1000.0
5 (Water absorption)	1000.0
5 (Hardness)	2000.0
5 (Moisture content)	500.0
5 (Dry density )	1000.0

2962

National Test House (NR), Ghaziabad

IS 3622 (1977) - Sandstone (slabs And Tiles)

Sandstone (slabs And Tiles)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Water Absorption)	1000.0
4.1 (Transverse Strength)	2000.0

2963

National Test House (NR), Ghaziabad

IS 1536 (2001) - Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision)

Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Dimensions)	1000.0
11.3 (Brinell hardness)	1500.0
13.5 (Mass)	1000.0
15 (Coating)	1000.0
0 (Thickness)	500.0
0 (Tensile Test)	3000.0
0 (Ring Test)	3000.0
0 (Ovality)	1000.0
0 (Class of Pipe)	-
0 (Marking)	-
0 (Straightness)	-
0 (Visual Check & Hammer test)	1000.0

2964

National Test House (NWR), Jaipur

IS 1003 : Part 2 (1994) - Timber Panelled And Glazed Shutters: Part 2 Windows and Ventilator Shutters

Timber Panelled And Glazed Shutters: Part 2 Windows and Ventilator Shutters

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6, Table 1, Fig 2 to 4 (Construction and workmanship -IS 1003 (Part 2) : 1994)	1000.0
7, Table 2 & 3, Fig 6 (Dimensions, Sizes and Tolerances -IS 1003 (Part 2) : 1994)	2000.0
8 (Location of Fittings and accessories -IS 1003 (Part 2) : 1994)	1000.0
9 (Finish -IS 1003 (Part 2) : 1994)	1000.0
10 (Glazing -IS 1003 (Part 2) : 1994)	1000.0
11.1 (Slamming Test -IS 1003 (Part 2) : 1994, Annex C)	1000.0

2965

National Test House (NWR), Jaipur

IS 1003 : Part 1 (2003) - Timber Panelled and Glazed Shutters-Door shutter

Timber Panelled and Glazed Shutters-Door shutter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Location of fittings and accessories -IS 1003 (Part 1) : 2003)	1000.0
6, Table 1, Fig 2 to 4 (Construction and Workmanship -IS 1003 (Part 1) : 2003)	2000.0
9 (Finish -IS 1003 (Part 1) : 2003)	1000.0
11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998)	2000.0
11.2 (General Flatness-IS 4020 (Part 3):1998)	1000.0
11.3 (Local Planeness-IS 4020 (Part 4):1998)	1000.0
11.4 (Impact Indentation-IS 4020 (Part 5):1998)	1000.0
11.5 (Flexure Testing-IS 4020 (Part 6):1998)	1000.0
11.6 (Edge Loading Test-IS 4020 (Part 7):1998)	1500.0
11.7 (Shock Resistance Test-IS 4020 (Part 8):1998)	1500.0
11.8 (Buckling Test-IS 4020 (Part9):1998)	1500.0
11.9 (Slamming Test-IS 4020 (Part 10):1998)	1500.0
11.10 (Misuse Test-IS 4020 (Part 11):1998)	1.0
11.11 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998)	1.0

2966

National Test House (SR), Chennai

NTH SR MICR Cheque Paper Sensitization to chemicals and UV Light (2022) - NTH SR MICR Cheque Paper Sensitization to chemicals and UV Light

NTH SR MICR Cheque Paper Sensitization to chemicals and UV Light

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2967

National Test House (NR), Ghaziabad

NTH/NR/RPPT/Rubber & Rubber Products (2025) - Rubber Sheets and Rubber Products

Rubber Sheets and Rubber Products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3400 (Part 1) (Tensile Strength)	2000.0
IS 3400 (Part 1) (Elongation at Break)	1000.0
IS 3400 (Part 1) (Tensile strength after heat aging)	3000.0
IS 3400 (Part 1) (Elongation at break after heat ageing)	2000.0
- (Shore 'A' Hardness)	1000.0
IS 3400 (Part /10/Sec.1) (Compression Set)	2000.0
IS 3400 (Part 17) (Tear Strength)	2000.0
- (Shore 'A' Hardness)	1000.0
IS 3400 (Part 2) (Hardness, IRHD)	1000.0
IS 3400 (Part 3) (Abrasion Resistance)	2000.0
IS 3400 (Part 4) (Accelerated Ageing and Heat Resistance)	3000.0
IS 3400 (Part 5) (Adhesion of rubbers to textile fabrics)	3000.0
IS 3400 (Part 6) (Determination of the Effect of Liquids)	5000.0
IS 3400 (Part 16) (Flexing Resistance)	3000.0
IS 3400 (Part 15) (Volume Resistivity)	2000.0
Firm's Requirement (Thickness)	1000.0
Firm's request (Dimensions)	1000.0
Firm's request (Weight)	1000.0

2968

National Test House (ER), Kolkata

IS 4277 (2014) - Sunflower oil - Specification (Second Revision)

Sunflower oil - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.7(i) (moisture and insoluble impurities)	500.0
5.7.(ii) (colour in lovibond scale)	500.0
5.7(iii) (Refractive index 40 dg)	500.0
5.7(iv) (saponification value)	500.0
5.7(v) (Iodine value)	500.0
5.7(vi) (Acid value)	500.0
5.7(vii) (Unsaponifiable matter)	500.0
5.2 (Peroxide value)	500.0
5.8.1.3 (Limits for toxic metals, Lead)	500.0
5.8.1.3 (Limits for toxic metals, Arsenic)	500.0
5.8.1.3 (Limits for toxic metals, Cadmium)	500.0
5.8.1.3 (Limits for toxic metals, Mercury)	500.0
5.3 (Test for presence of neem oil)	500.0
5.3 (Test for presence of Castor oil)	500.0
5.3 (Test for presence of Kusum oil and other oils containing cyanogenic compounds)	500.0
5.3 (Test for presence of mineral oil)	500.0
5.3 (Test for presence of Hydrocyanic acid)	500.0
5.3 (Test for presence of Argemone oil)	500.0
5.3 (Test for presence of Karanja oil)	500.0
5.2 (freedom from adulterants, sediments, suspended particles,foreign matter etc)	500.0

2969

National Test House (NR), Ghaziabad

IS 12235 : Part 1 to 19 (2004) - Thermoplastics Pipes and Fittings - Methods of Test

Thermoplastics Pipes and Fittings - Methods of Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 5 (Longitudinal Reversion)	2000.0
Part 8 (Resistance to Internal Hydrostatic Pressure)	5000.0

2970

National Test House (NR), Ghaziabad

IS 1285 (2023) - Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Chemical Analysis (as per IS 733))	5000.0
10 (Tensile Strength (as per IS 733))	1000.0
8 (Dimension)	1000.0
10 (0.2 % Proof Stress (as per IS 733))	1000.0
10 (% Elongation (as per IS 733))	1000.0
6 (Freedom from Defect)	1000.0
4 (Mass per meter)	1000.0
10.1 (Tensile strength test as per IS 1608 (Part 1):2022, N/mm2)	3000.0
4 (Anodic coating thickness, micron)	2000.0