NTH - Management Information System

Search by Standard No.

Reset

4404 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3841

National Test House (WR), Mumbai

IS 2185 : Part 3 (1984) - Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4 (Compressive Strength, in N/mm²)	12000.0
8.6 (Drying Shrinkage, in %)	1000.0
8.3 (Block Density, kg/m³)	1000.0
8.2 (Dimensions (Length, width and thickness))	3000.0
5 (Moisture Content (as received condition), on the lines of IS 6441, %)	1000.0

3842

National Test House (WR), Mumbai

IS 2185 : Part 1 (2005) - Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.4 & Table2 (Compressive Strength-Annex D of -IS 2185 : Part 1)	4000.0
9.5 (Water Absorption-Annex E of -IS 2185 : Part 1)	1000.0
9.3 & 5 (Block Density-Annex C of -IS 2185 : Part 1)	1000.0
9.2, 4.2.3 & Table 1 (Dimensions-Annex B of -IS 2185 : Part 1)	500.0
9.6 (Drying Shrinkage-Annex F of -IS 2185 : Part 1)	2000.0
9.7 (Moisture movement-Annex G of -IS 2185 : Part 1)	1000.0

3843

National Test House (WR), Mumbai

IS 1237 (2012) - Cement Concrete Flooring Tiles - Specification

Cement Concrete Flooring Tiles - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.5 (Water Absorption-Annex E of IS 1237:2012)	1000.0
12.6 (Wet transverse strength-Annex F of IS 1237:2012)	2000.0
12.4 (Straightness-Annex D of IS 1237:2012)	500.0
12.3 (Perpendicularity-Annex C of IS 1237:2012)	500.0
12.2 (Flatness-Annex B of IS 1237:2012)	500.0
10 (General Quality-IS 1237:2012)	100.0
8.3 & Table2 (The thickness of Wearing Layer-IS 1237:2012)	100.0
7, 8.2 & Table1 (Thickness & Tolerances-IS 1237:2012)	100.0
7 & 8.1, Table1 (Dimensions & Tolerances-IS 1237:2012)	200.0
12.7 (Resistance to wear-Annex G of IS 1237:2012)	2500.0

3844

National Test House (WR), Mumbai

IS 13801 (2013) - Chequered Cement Concrete Tiles -

Chequered Cement Concrete Tiles -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.4 (Water Absorption)	1000.0
12.6 (Resistance to wear)	2000.0
12.5 (Wet transverse strength)	2000.0
12.3 (Straightness)	500.0
12.2 (Perpendicularity)	500.0
12.1 (Flatness)	500.0
10 (General Quality)	100.0
8.3 (Thickness of Wearing Layer)	500.0
7 (Dimension: Thickness)	1000.0
7.1,Table 1,Column 2 (Dimensions -Length)	300.0
9 (Depth of groove (IS 13801:2013))	-
8.2 (Tolerance on Thickness (IS 13801:2013))	-
7.1,Table 1,Column 3 (Dimension-Breadth(IS 13801:2013))	-

3845

National Test House (WR), Mumbai

IS 710 (2010) - Marine Plywood -Specification

Marine Plywood -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1.6 (Static Bending Strength-IS 1734 (Part 11):1983)	3000.0
9.1.7 (Wet Bending Strength-IS 710:2010 & IS 1734 (Part 11):1983)	3000.0
9.1.5 (Mycological Test-Observation, Glue Shear Strength and Adhesion of Plies- IS 1734 (Part 7, 4 & 5):1983)	2500.0
9.1.4 (Tensile Strength-IS 1734 (Part 9):1983)	2500.0
9.1.3.1.2 (Water Resistance Test-Adhesion of Plies-IS 710:2010 & IS 1734 (Part 5):1983)	1000.0
9.1.2.2 (Glue Adhesion in Dry State-Adhesion of Plies in dry state-IS 1734 (Part 5):1983)	1000.0
9.1.2.1 (Glue Adhesion in Dry State-Glue Shear Strength-IS 1734 (Part 4):1983)	2000.0
7 (Workmanship & Finish-IS 710:2010)	1000.0
6 (Dimensions-IS 710:2010, Annex B)	1000.0
9.1.1 (Moisture content-IS 1734 (Part 1):1983)	1000.0
9.1.8 (Retention of preservative-IS 2753 (Parts 1 & 2))	3000.0
- - (Nail and Screw holding Power)	2000.0
- - (Acidity and alkalinity Resistance Test)	2000.0

3846

National Test House (WR), Mumbai

IS 8042 (2015) - White portland cement - Specification (Third Revision)

White portland cement - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Compressive strength, ,672±4 h [as per IS 4031 (Part 6)], MPa)	1000.0
6 (Compressive strength, 168 ± 2 h [as per IS 4031 (Part 6)], MPa)	1000.0
6 (Compressive strength, 72±1 h [as per IS 4031 (Part 6)], MPa)	1000.0
6 (Setting time Final [as per IS 4031 (Part 5)], minutes)	500.0
6 (Setting time Initial [as per IS 4031 (Part 5)], minutes)	500.0
6 (Soundness-autoclave method [as per IS 4031 (Part 3)], %)	1000.0
6 (Soundness-Lechatlier method [as per IS 4031 (Part 3)], mm)	500.0
6 (Fineness [as per IS 4031 (Part 2)], m^2/kg)	1000.0
6 (Degree of whiteness [As per Annex B of IS 8042], Percent)	1500.0
5 (Magnesia (as per IS 4032), %)	500.0
5 (Insoluble Residue (as per IS 4032), %)	500.0
5 (Iron Oxide (as per IS 4032), %)	500.0
5 (Ratio of lime to silica, alumina and iron oxide (as per IS 4032))	1000.0
5 (Total Sulphur Content calculated as SO3 (as per IS 4032), %)	500.0
5 (Loss on ignition, (as per IS 4032), %)	500.0
5 (Chloride Content, (as per IS 4032), %)	500.0

3847

National Test House (WR), Mumbai

IS 455 (2015) - Portland slag cement - Specification

Portland slag cement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (28 Days Compressive strength,672±4 h)	1000.0
7 (7 Days Compressive strength,168±2 h)	1000.0
7 (3 Days Compressive strength,72±1 h)	1000.0
7 (Setting time,Final)	250.0
7 (Setting time Initial)	250.0
7 (Soundness-autoclave method)	1000.0
7 (Soundness-Lechatlier method)	500.0
7 (Fineness)	1000.0
6 (Alkali content)	1000.0
6 (Chloride content)	700.0
6 (Loss on Ignition)	700.0
6 (Sulphide Sulphur (S))	700.0
6 (Total Sulphur content calculated as sulphuric anhydride SO3)	500.0
6 (Magnesia)	700.0
6 (Insoluble residue)	700.0
13 (Consistency of Cement)	500.0

3848

National Test House (WR), Mumbai

IS 3812 : Part 2 (2013) - Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Soundness by autoclave test — Expansion of specimen )	1500.0

3849

National Test House (NR), Ghaziabad

13683 (2006) - Ring Spun Grey Cotton Yarn

Ring Spun Grey Cotton Yarn

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3850

National Test House (NR), Ghaziabad

IS 10733 (1983) - Tanker Hose of Rubber

Tanker Hose of Rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3851

National Test House (ER), Kolkata

IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Marking, manufacturer's name/trade mark, Visual verification (Naked Eye))	-
6.4 (Durability of Marking)	-
7 (Verification of dimensions with gauges of conduit pipe and Checking of dimensions of the socket end)	2000.0
7.4 (Uniformity of Wall Thickness)	-
8 (Construction)	-
9.2 (Bending Test at room temperature)	2000.0
9.3 (Compression Test (Compression under load))	2000.0
9.4 metal (Impact Test)	3000.0
9.5 metal (Collapse Test)	2000.0
10 (Resistance to Heat)	2000.0
11 (Resistance to Burning)	2000.0
12 (12.1.2 Of IS:9537-Part I Insulation Resistance)	2000.0
12.1 (12.1.1 of IS:9537-Part I Electrical Strength)	2000.0

3852

National Test House (NR), Ghaziabad

IS 8329 (2000) - Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1.1 (External diameter)	1000.0
10.1.1 (Tensile Strength)	2000.0
10.1.1 (Percent Elongation)	1500.0
10.2 (Brinell Hardness)	2000.0
16.2 (C-2.3) (Bituminous Coating Test)	1000.0
15.3 (Ovality of pipe)	1000.0
16.3 (Thickness of Cement mortar lining of pipe)	1000.0
13.3 (Wall Thickness of pipe)	1000.0
13.2 (Bore Clearance of mortar lining in ductile iron pipe)	1000.0

3853

National Test House (WR), Mumbai

IS 1608 : Part 1 (2018) - Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Tensile Test with sample preparation)	4000.0
14 (Tensile Test without sample preparation)	3000.0

3854

National Test House (WR), Mumbai

IS 513 : Part 1 (2016) - Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Yield stress)	1000.0
8.1 (Tensile strength)	1000.0
8.1 (% Elongation)	1000.0
8.2 (Cupping Test)	3000.0
8.3 (Hardness Test)	2000.0
8.4 (Bend Test)	1000.0
8.5 (Mean Plastic Strain Ratio (r bar))	3000.0
8.6 (Tensile Strain Hardening Component (n-value))	3000.0
8.7 (Bake Hardening Index (BH))	3000.0
9.4.1 (Surface condition (Quality A))	500.0
9.4.2 (Surface condition (Quality B))	500.0
9.5 (Surface finish)	1000.0
11 (Thickness)	1000.0
7 (Chemical composition (Carbon))	625.0
7 (Chemical composition (Manganese))	625.0
7 (Chemical composition (Sulphur))	625.0
7 (Chemical composition (Phosphorus))	625.0
7 (Chemical composition (Aluminium))	208.0
7 (Chemical composition (Silicon))	208.0
7 (Chemical composition (Chromium))	208.0
7 (Chemical composition (Nickel))	208.0
7 (Chemical composition (Niobium))	208.0
7 (Chemical composition (Vanadium))	208.0
7 (Chemical composition (Titanium))	208.0
7 (Chemical composition (Molybdenum))	208.0
7 (Chemical composition (Boron))	208.0
7 (Chemical composition (Calcium))	208.0
7 (Chemical composition (Copper))	208.0
7 (Chemical composition (Nitrogen))	208.0
7.1 (Chemical composition with micro alloying elements)	5000.0
7.1 (Chemical composition, % by mass)	2500.0

3855

National Test House (WR), Mumbai

1708 (1986) - Testing of Small Specimen of Timber

Testing of Small Specimen of Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 1 (Moisture Content, in %)	1000.0
Part 2 (Specific Gravity /Density, g/cm3)	500.0
Part 5 (Static Bending Strength (MoR), N/mm2)	3000.0
Part 8 (Compressive Strength Parallel to Grain, N/mm2)	3000.0
Part 9 (Compressive Strength Perpendicular to Grain, N/mm2)	3000.0
Part 10 (Hardness under Static Indentation, N)	-
Part 11 (Shear Strength Paralled to Grain, N/mm2)	1500.0
Part 12 (Tensile Strength Parallel to Grain, N/mm2)	2000.0
Part 15 (a) (Nail Holding Power, N)	1500.0
Part 15 (b) (Screw Holding Power, N)	1500.0
- - (Water Absorption at 27 +/- 2 Deg C in 24 hr, %)	1000.0

3856

National Test House (WR), Mumbai

Customer Spec. WR-1 - RADIO/RF/MICROWAVE/IT/OPTICAL EQUIPMENT

RADIO/RF/MICROWAVE/IT/OPTICAL EQUIPMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (MARKING ON ENVELOPE)	700.0
2 (MARKING ON SAMPLE)	700.0
3 (Description of Good as declared)	600.0
4 (Functional Test as applicable)	8000.0
4 (Functional Test as applicable.SAMPLE IS TESTED FOR INTENDED FUNCTIONING OF ITS BASIC OPERATION)	15000.0
1 (Technical Opinion/Observation)	3000.0

3857

National Test House (ER), Kolkata

IS 14871 (2000) - Fibre reinforced Cement - Corrugated or Asymmetrical Sheets& Fittings for Roofing & Claddi

Fibre reinforced Cement - Corrugated or Asymmetrical Sheets& Fittings for Roofing & Claddi

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5.1.1 (a) (Dimension (Profile))	1000.0

3858

National Test House (WR), Mumbai

Customer Specification(WR- Elect) - Oxide based Advance Chemistry Cell Pack

Oxide based Advance Chemistry Cell Pack

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Peak voltage the battery can be charged)	200.0
2 (The open circuit voltage observed post discharging the battery up to 90% of maximum voltage)	200.0
3 (The battery is charged up to 100% and then discharged up to 90% @ 1C and the current values are recorded every 10sec, the mean of these currents is recorded as continuous current)	2000.0
4 (Temperature inside the battery is recorded periodically during charging and discharging cycle)	2000.0
5 (Determination of Test Cycle)	600.0
6 (The rate of discharge of voltage at constant load w.r.t time)	2000.0
7 (The rate of discharge of voltage recorded periodically when discharged up to 90% of maximum voltage)	2000.0
8 (The battery is subjected to three charging and discharging cycles, then the battery voltage with load connected at 100% and 90% is recorded for all three cycles)	2000.0

3859

National Test House (ER), Kolkata

IS 10733 (1983) - Tanker Hose of Rubber

Tanker Hose of Rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3.2 (Mass Of The Hose)	1000.0
4.3.4 (Thickness)	1000.0
4.4(i) (Tensile Strength At Break)	1000.0
4.4(ii)a (Elongation At Break)	-

3860

National Test House (ER), Kolkata

IS 1554 : Part 2 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLESPVC Insulated (Heavy Duty) Electric Cables, for Working Voltages from 3'3 kV up to and Including 11 kV

SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLESPVC Insulated (Heavy Duty) Electric Cables, for Working Voltages from 3'3 kV up to and Including 11 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3861

National Test House (ER), Kolkata

Customer Spec. WR-1 - RADIO/RF/MICROWAVE/IT/OPTICAL EQUIPMENT

RADIO/RF/MICROWAVE/IT/OPTICAL EQUIPMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3862

National Test House (ER), Kolkata

Customer Specification(WR- Elect) - Oxide based Advance Chemistry Cell Pack

Oxide based Advance Chemistry Cell Pack

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3863

National Test House (ER), Kolkata

IRS S 63 (2014) - PVC Insulated underground unsereened cable for railway signaling

PVC Insulated underground unsereened cable for railway signaling

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6 (Measurement of Dimension ( Power Cable))	500.0
5.6 (Dimensions of Signaling Cable)	500.0

3864

National Test House (WR), Mumbai

IS 3812 (Part 1) (2013) - Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Soundness by autoclave test — Expansion of specimen )	1500.0
7.1 (Compressive strength at 28 days )	3000.0
7.1 ( Lime reactivity — Average compressive strength )	3000.0
7.1 (Particles retained on 45 micron IS sieve (wet sieving) )	1000.0
7.1 (Fineness — Specific surface by Blaine’s permeability method)	1000.0
5.1 ,6.1 (Loss on ignition)	500.0
5.1 ,6.1 (Total Chlorides)	500.0
5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O))	500.0
5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3))	500.0
5.1 ,6.1 (Magnesium oxide(MgO))	500.0
5.1 ,6.1 (Silicon dioxide(SiO2))	500.0
5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3))	500.0

3865

National Test House (ER), Kolkata

IP CODE : IS/IEC :60529 (2001 reaff : 2019) - Degree of protection provided by Enclosure(IP Code)

Degree of protection provided by Enclosure(IP Code)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13.2 First Characteristic Numeral 1 (13.2 First Characteristic Numeral 1 :Protection against solid foreign objects of 50 mm dia and greater)	7500.0
13.2 First Characteristic Numeral 2 (13.2 First Characteristic Numeral 2 :Protection against solid foreign objects of 12.5 mm dia and greater)	7500.0
13.2 First Characteristic Numeral 3 (13.2 First Characteristic Numeral 3 : Protected against solid foreign objects of 2.5 mm dia and greater)	7500.0
13.2 First Characteristic Numeral 4 (13.2 First Characteristic Numeral 4 :protected against solid foreign object of 1.0 mm dia and greater)	7500.0
13.4/13.5 First Characteristic Numeral 5 (13.4/13.5 First Characteristic Numeral 5 : Dust Protected)	7500.0
13.4/13.5 First Characteristic Numeral 6 (13.4/13.5 First Characteristic Numeral 6 : Dust - Tight)	7500.0
14.2.1 Second Characteristic Numeral 1 (14.2.1 Second Characteristic Numeral 1 : Protected against vertically falling water drops)	7500.0
14.2.2 Second Characteristic Numeral 2 (14.2.2 Second Characteristic Numeral 2 : Protection against vertically falling water drops when enclosure tilted upto 15 degree)	7500.0
14.2.5 Second characteristic numeral 5 (14.2.5 Second characteristic numeral 5: Protected against Water Jet)	7500.0
14.2.6 Second characteristic numeral 6 (14.2.6 Second characteristic numeral 6: Protected against powerful water Jet)	7500.0
14.2.7, Second characteristic numeral 7 (14.2.7, Second characteristic numeral 7:Protected against the effects of temporary immersion in water)	7500.0
14.2.8, Second Characteristic numeral 8 (14.2.8, Second Characteristic numeral 8: Protected against the effects of continuous immersion in water. if water has entered, it shall not be sufficient to interfere with the correct operation of the equipment or impair safety.)	7500.0
14.2.4 Second characteristic numeral 4 (14.2.4 Second characteristic numeral 4 with oscillating tube or spray nozzle)	7500.0
14.2.3 second characteristic numeral 3 (14.2.3 second characteristic numeral 3:Protected against spraying water)	7500.0
Drawing Verification (As per drawing with respect to dimension only and customer requirement)	3000.0

3866

National Test House (ER), Kolkata

IS/IEC : 60529 (2001 reaff : 2019) - Degree of Protection Provided by Enclosure(IP CODE)

Degree of Protection Provided by Enclosure(IP CODE)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13.2 First Characteristic Numeral 1 (Protection against solid foreign object of 50mm dia and greater,First Characteristic Numeral 1, cl 13.2)	7500.0
13.2 First Characteristic Numeral 2 (First Characteristic Numeral 2,Protection against solid foreign objects of 12.5 mm dia and greater.)	7500.0
13.2 First Characteristic Numeral 3 (First Characteristic Numeral 3, Protection against solid foreign objects of 2.5 mm dia and greater.)	7500.0
13.2 First Characteristic Numeral 4 (Protection against solid foreign objects of 1.0 mm dia and greater,First Characteristic Numeral 4)	7500.0
13.4/13.5 First Characteristic Numeral 5 (Dust Protected)	7500.0
13.4/13.5 First Characteristic Numeral 6 (No ingress of Dust)	7500.0
14.2.1 Second Characteristic Numeral 1 (Protected against vertically falling water drops)	7500.0
14.2.2 Second Characteristic numeral 2 (Protection against vertically falling water drops when enclosure tilted upto 15 degree)	7500.0
14.2.3 second characteristic numeral 3 (14.2.3 second characteristic numeral 3 :Protected against spring water)	7500.0
14.2.4 Second characteristic numeral 4 (14.2.4 Second characteristic numeral 4 :Protected against splashing water)	7500.0
14.2.5 Second characteristic numeral 5 (Protection against water Jets,14.2.5 Second characteristic numeral 5)	7500.0
14.2.6 Second characteristic numeral 6 (14.2.6 Second characteristic numeral 6 : Protected against powerful Jet)	7500.0
14.2.7, Second characteristic numeral 7 (14.2.7, Second characteristic numeral 7 :Protected against the effects of temporary immersion in water)	7500.0
14.2.8, Second Characteristic numeral 8 (Protection against the effects of continuous immersion in water:14.2.8, Second Characteristic numeral 8)	7500.0
Drawing Verification withe respect to dimension (Drawing Verification with respect to dimension)	3000.0

3867

National Test House (NR), Ghaziabad

CBIP 317 (2013) - Central Board of Irrigation & Power-Manual No-317- Single Phase Transformer

Central Board of Irrigation & Power-Manual No-317- Single Phase Transformer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Sec BB (3) (Magnetic Balance Test)	2000.0
Sec BB (3) (Measurement of unbalanced current)	2000.0
Sec BB (3) (Polarization lndex)	5000.0
Sec BB (3) (Voltage)	3000.0
Sec BB (3) (Unbalanced Current)	3000.0
17.3.2 (Permanent Deflection)	10000.0
17.3.1 (Permanent Deflection)	8000.0

3868

National Test House (NR), Ghaziabad

IS 335 (1993) - NEW INSULATING OILS- SPECIFICATION

NEW INSULATING OILS- SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.5.2.6 (Measurernent of Break Down Voltage of trransformer Oil)	10000.0

3869

National Test House (NR), Ghaziabad

IS 15652 (2006) - Insulating mats for electrical purposes - Specification

Insulating mats for electrical purposes - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1 (Insulation Resistance with Water)	4000.0
8.2.2 (Leakage Current Test)	2500.0
8.2.3 (AC Dielectric Strength)	7000.0
8.2.4 (AC Proof Voltage)	3000.0
6.3 (Thickness)	500.0
8.4.2 (Low Temperature Resistance & High Voltage test)	4000.0
8.6 (Extreme low temperature test)	6000.0
8.1 (Tensile Strength and Elongation at Break)	1500.0
8.3 (Tensile Strength and Elongation at break After Ageing)	4000.0
8.5 (After Acid/Alkalis and Oil Resistance)	4500.0
8.4.1 (Flame Retardance)	2000.0
6.2 (Dimensions)	1000.0

3870

National Test House (NR), Ghaziabad

IS 15769 (2008) - Flux Cored (Tubular) Electrodes for Gas Shielded and Self Shielded Metal welding of Carbon or Carbon Manganese Steel

Flux Cored (Tubular) Electrodes for Gas Shielded and Self Shielded Metal welding of Carbon or Carbon Manganese Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Diameter of Core Wire)	500.0
4.2 (Temper)	1000.0
4.2 (Cast)	500.0
4.2 (Helix)	500.0
4.3 (Uniformity)	500.0
4.4.3 (Spools, Overall Diameter A)	500.0
4.4.3 (Spools, Overall Width, B)	500.0
4.4.3 (Spools, Inner Diameter, C)	500.0
4.4.3 (Spools, Distance Between Axes D)	500.0
4.4.3 (Spools, Driving Hole Diameter E)	500.0
4.4.3 (Spools, Weight, Max)	500.0
5.8 (Chemical Analysis)	5000.0
5.2 (Radiographic Examination)	1500.0
5.3 (Tensile Test)	3000.0
5.4 (Charpy Impact Test)	3000.0
5.1.3.2 (Fillet Weld Fracture)	4000.0
5.1.3.2 (Dimension of Fillet Weld)	500.0
5.5 (Transverse Tensile Test)	3000.0
5.6 (Longitudinal Guided Bend Test)	1000.0
5.7 (Diffusible Hydrogen Test)	5000.0