| 2881 |
National Test House (ER), Kolkata
| High Polymer Cus specification (2003) - Wrapping Coating Material |
Wrapping Coating Material |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.5 Viii (Solubility of coal tar based tape in petrol,% by mass
C-2 SOLUBILITY OF COAL TAR BASED TAPE
IN PETROL IS 15337:2003 RA 2018 (Annex c)) |
5000.0 |
|
|
| 2882 |
National Test House (ER), Kolkata
| NTH/ER/CHEM/Acidity - Total acidity of Transformer Oil |
Total acidity of Transformer Oil |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Total acidity of transformer oil) |
1200.0 |
|
|
| 2883 |
National Test House (ER), Kolkata
| Custom-17-ER-LM - TRAINING |
TRAINING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Training) |
132000.0 |
|
|
| 2884 |
National Test House (ER), Kolkata
| NTH/ER/CHEM/Alumina - Alumina content as Al2O3 in Fire Brick |
Alumina content as Al2O3 in Fire Brick |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Alumina Content as Al2O3) |
2000.0 |
|
|
| 2885 |
National Test House (ER), Kolkata
| F-12 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-12 Technical Name: Heat resistant silicone aluminium paint suitable upto 540 Deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-12 Technical Name: Heat resistant silicone aluminium paint suitable upto 540 Deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Temperature resistance 540 ⁰ C Dry Service (ASTM D 2485 method B)) |
4200.0 |
|
| 9 (Temperature resistance540 ⁰ C (ASTM D 2485 method B)) |
1200.0 |
|
| 10 (Non Volatile Matter (% by mass)) |
1200.0 |
|
| 11 (Volatile Matter (% by mass)) |
1200.0 |
|
| 12 (Specific Gravity (ASTM D1475)) |
1200.0 |
|
| 13 (Ash Content (% by mass)) |
1200.0 |
|
|
| 2886 |
National Test House (ER), Kolkata
| F-11 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-11 Technical Name: Heat resistant synthetic medium based two pack Aluminium paint suitable upto 250 deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-11 Technical Name: Heat resistant synthetic medium based two pack Aluminium paint suitable upto 250 deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Temperature resistance250 ⁰ C (ASTM D 2485 method A)) |
4200.0 |
|
| 9 (Non Volatile Matter (% by mass) Component-A -Aluminium Paste) |
1200.0 |
|
| 10 (Non Volatile Matter (% by mass) Component-B (Accelerator)) |
1200.0 |
|
| 11 (Volatile Matter (% by mass) Component-A Aluminium Paste) |
1200.0 |
|
| 12 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 13 (Specific Gravity Component-A Aluminium Paste (ASTM D1475)) |
1200.0 |
|
| 14 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 15 (Ash Content (% by mass)Component-B (Accelerator)) |
1200.0 |
|
| 16 (Temperature resistance 250 ⁰ C (ASTM D 2485 method B)) |
1000.0 |
|
|
| 2887 |
National Test House (WR), Mumbai
| IS 6219 (1989) - Methods of Test for General Purpose Flat Pallets for Through Transit of Goods |
Methods of Test for General Purpose Flat Pallets for Through Transit of Goods |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Dimensions, (Length, Width, thickness, etc.), mm) |
2000.0 |
|
| 4.2 & 6.4 (Moisture Content of individual components [as per IS 1708 (P-1) 1986], in %) |
2000.0 |
|
| 4.1 (Dimension of Top Planks (upto 8 Nos), in nn) |
4000.0 |
|
| 4.1 (Dimension of Stringers (upto 3 Stringers), in mm) |
1500.0 |
|
| 4.1 (Dimension of Bottom Planks (upto 3 Planks), in mm) |
1500.0 |
|
| 4.1 (Dimension of Blocks (upto 10 Nos), in mm) |
5000.0 |
|
|
| 2888 |
National Test House (ER), Kolkata
| F-9 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-9 Technical Name :Inoranic zinc silicate coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-9 Technical Name :Inoranic zinc silicate coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Pot life at 30⁰C for two component paints, hrs) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Temperature resistance 400 ⁰ C (ASTM D 2485 method B)) |
1000.0 |
|
| 11 (Temperature resistance 400 ⁰ C Dry Service (ASTM D 2485 method B)) |
2000.0 |
|
| 12 (Zinc Content as Zn in dry film % by mass) |
1200.0 |
|
| 13 (MEK rub test ASTM D 4752) |
1200.0 |
|
| 14 (Non Volatile Matter (% by mass) Component-A Zinc dust) |
1000.0 |
|
| 15 (Non Volatile Matter (% by mass) Component-B liquid accelerator) |
1000.0 |
|
| 16 (Volatile Matter (% by mass) Component-A Zinc dust) |
1200.0 |
|
| 17 (Volatile Matter (% by mass) Component-B liquid accelerator) |
1200.0 |
|
| 18 (Specific Gravity Component-A Zinc dust (ASTM D1475)) |
1200.0 |
|
| 19 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 20 (Ash Content (% by mass)Component-A Zinc dust) |
1200.0 |
|
| 21 (Ash Content (% by mass)Component-B Liquid Accelerator) |
1200.0 |
|
|
| 2889 |
National Test House (ER), Kolkata
| F-8 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-8 Technical Name: Self priming surface tolerant high build epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-8 Technical Name: Self priming surface tolerant high build epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Pot life at 30⁰C for two component paints, hrs) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Temperature resistance 80 ⁰ C (ASTM D 2485 method A)) |
1000.0 |
|
| 11 (Temperature resistance 80 ⁰ C (ASTM D 2485 method B)) |
2000.0 |
|
| 12 (Full cure at 30 Deg C (for immersion / high temperature service)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-A (Base)) |
1000.0 |
|
| 14 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1000.0 |
|
| 15 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 16 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 17 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 18 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 20 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2890 |
National Test House (SR), Chennai
| OIML R 76-1 (2006) - Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests |
Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Weighing balance calibration) |
4000.0 |
|
|
| 2891 |
National Test House (ER), Kolkata
| Customised specification for Cumin Powder - Customised specification for Cumin Powder |
Customised specification for Cumin Powder |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Description) |
500.0 |
|
| 2 (Moisture, Percent by mass) |
500.0 |
|
| 3 (Total ash ,Dry basis ,Percent by mass) |
500.0 |
|
| 4 (Acid insoluble ash on dry basis, Percent by mass) |
500.0 |
|
| 5 (Volatile oil on dry basis, Percent by mass) |
500.0 |
|
| 6 (Non Volatile ether extract , Percent by mass) |
500.0 |
|
| 7 (Salmonella (in 25 g)) |
500.0 |
|
|
| 2892 |
National Test House (ER), Kolkata
| F-7 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-7 Technical Name High build coal tar epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-7 Technical Name High build coal tar epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Pot life at 30⁰C for two component paints, hrs) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Temperature resistance 80 ⁰ C (ASTM D 2485 method A)) |
1200.0 |
|
| 11 (Temperature resistance 80 ⁰ C (ASTM D 2485 method B)) |
1200.0 |
|
| 12 (Full cure at 30 Deg C (for immersion / high temperature service)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 14 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 15 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 16 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 17 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 18 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 20 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2893 |
National Test House (WR), Mumbai
| 260 (2001) - ALUMINIUM SULPHATE, NON-FERRIC |
ALUMINIUM SULPHATE, NON-FERRIC |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (i) (Insoluble matter, percent by mass) |
600.0 |
|
| 4.2 (ii) (pH ( of 5 percent solution )) |
600.0 |
|
| 4.2 (iii) (Heavy metals (as Pb)) |
700.0 |
|
| 4.2(iv) (Iron (as Fe), percent by mass) |
600.0 |
|
| 4.2 (vi) (Arsenic (as AS203), parts per million) |
700.0 |
|
| 4.2 (vii) (Ammonium salts (as NH3), percent by mass) |
600.0 |
|
| 4.2 (viii) (Aluminium (as Al203), percent by mass) |
700.0 |
|
| 4.2 RESULTS AS PER ANNEXURE (4.2 RESULTS AS PER ANNEXURE) |
5000.0 |
|
|
| 2894 |
National Test House (SR), Chennai
| CUS/SR/MECH/10 - Hoist Chain |
Hoist Chain |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Proof Load) |
2500.0 |
|
| 2.0 (Breaking load) |
2500.0 |
|
|
| 2895 |
National Test House (ER), Kolkata
| Customised Specification Organic Manure (On the lines of FCO-1985) - Customised Specification Organic Manure (On the lines of FCO-1985) |
Customised Specification Organic Manure (On the lines of FCO-1985) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture, Percent by weight) |
1000.0 |
|
| 3 (Bulk density (g/cm Sq.)) |
1000.0 |
|
| 4 (Total Organic matter (percent by weight)) |
1000.0 |
|
| 5 (Total Organic carbon (percent by weight)) |
1000.0 |
|
| 6 (Total Nitrogen (as N), percent by weight) |
1000.0 |
|
| 7 (Total Phosphates (As P2O5), Percent by weight) |
1000.0 |
|
| 8 (Total potassium (as K2O), percent by weight) |
1000.0 |
|
| 9 (Calcium (as Ca), mg/kg) |
1000.0 |
|
| 10 (Magnesium (as Mg), mg/Kg) |
1000.0 |
|
| 11 (Iron (as Fe), mg/Kg) |
1000.0 |
|
| 12 (Zinc (as Zn), mg/Kg) |
1000.0 |
|
| 2 (pH (dilution at 10%)) |
1000.0 |
|
|
| 2896 |
National Test House (ER), Kolkata
| F-6 C EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-6 C Technical Name : Solventless epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-6 C Technical Name : Solventless epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1200.0 |
|
| 9 (Full cure at 30oC (for immersion/ high temperature service)) |
1200.0 |
|
| 10 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 11 (Temperature resistance
(ASTM D 2485 Methods A)) |
1200.0 |
|
| 12 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 14 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 15 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 16 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 17 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 18 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2897 |
National Test House (ER), Kolkata
| F-6B EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-6B Technical Name :Epoxy high build coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-6B Technical Name :Epoxy high build coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
1000.0 |
|
| 2 (DFT per coat, microns) |
1000.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1000.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 11 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 12 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 13 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 15 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 16 (Ash Content (% by mass)Component-B) |
1200.0 |
|
| 17 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 18 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 19 (Temperature resistance 80 ⁰ C (ASTM D 2485 method A)) |
1000.0 |
|
| 1.1 (Colour
as per Manufacturer’s supply shade’) |
100.0 |
|
|
| 2898 |
National Test House (ER), Kolkata
| F-6A EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-6A Technical Name :Epoxy high build coating
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-6A Technical Name :Epoxy high build coating
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
1000.0 |
|
| 2 (DFT per coat, μ) |
1000.0 |
|
| 3 (Theoretical covering capacity in m2/coat/ litre) |
1000.0 |
|
| 4 (Weight per litre in Kg/litre) |
1000.0 |
|
| 5 (Touch dry at 30DegC (max.)) |
1000.0 |
|
| 6 (Hard dry at 30Deg.C (max.)) |
1000.0 |
|
| 7 (Full cure at 30 deg.C
(for immersion/ high temperature
service)) |
1000.0 |
|
| 8 (Over-coating interval, hrs) |
1000.0 |
|
| 9 (Pot life at for two component
paints, hrs) |
1000.0 |
|
| 10 (Adhesion (ASTM D 4541)) |
2000.0 |
|
| 11 (Temperature resistance 80 deg.C for 24 hrs
(ASTM D 2485 Method A)) |
2000.0 |
|
| 12 (Non Volatile Matter (% by mass) Component-A (Base)) |
1000.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1000.0 |
|
| 14 (Volatile Matter (% by mass) Component-A (Base)) |
1000.0 |
|
| 15 (Volatile Matter (% by mass) Component-B (Hardener)) |
1000.0 |
|
| 16 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1000.0 |
|
| 17 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1000.0 |
|
| 18 (Ash Content (% by mass)Component-A (Base)) |
1000.0 |
|
| 19 (Ash Content (% by mass)Component-B) |
1000.0 |
|
|
| 2899 |
National Test House (ER), Kolkata
| F-2 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-2 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name : Aliphatic PU finish paint |
F-2 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name : Aliphatic PU finish paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
1000.0 |
|
| 2 (DFT per coat, microns) |
1000.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1000.0 |
|
| 4 (Weight per liter in kg/litre) |
1000.0 |
|
| 5 (Touch dry at 30 Deg c) |
500.0 |
|
| 6 (Hard dry at 30 deg C max) |
500.0 |
|
| 7 (Over coating interval , hours) |
1000.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1000.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Abrasion Resistance, mg per
1000gm/CS17/1000cycle (ASTM D4060)) |
2000.0 |
|
| 11 (Temperature resistance 80⁰ C
(ASTM D 2485 Method A)) |
2000.0 |
|
| 12 (Non Volatile Matter, % By mass Component-A (Base)) |
1000.0 |
|
| 13 (Non Volatile Matter, % By mass Component-B (Hardener)) |
1000.0 |
|
| 14 (Volatile Matter, % By mass Component-A (Base)) |
1000.0 |
|
| 15 (Volatile Matter, % By mass Component-B (Hardener)) |
1000.0 |
|
| 16 (Specific gravity of base (ASTM D1475)) |
1000.0 |
|
| 17 (Specific gravity of Curing agent (ASTM D1475)) |
1000.0 |
|
| 18 (Ash Content, % By mass Component-A (Base)) |
1000.0 |
|
| 19 (Ash Content, % By mass Component-B (Hardener)) |
1000.0 |
|
|
| 2900 |
National Test House (ER), Kolkata
| P-6 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - P-6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name :Epoxy zinc phosphate primer |
P-6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name :Epoxy zinc phosphate primer |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
2000.0 |
|
| 2 (DFT per coat microns) |
100.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1000.0 |
|
| 4 (Touch dry at 30 Deg c max (hours)) |
1000.0 |
|
| 5 (Hard dry at 30 deg C max(hours)) |
1000.0 |
|
| 6 (Over coating interval , hours) |
1000.0 |
|
| 7 (Potlife at 30 deg C for 2 comp paints, hours) |
1000.0 |
|
| 8 (Adhesion ASTM D 4541 (Mpa)) |
5000.0 |
|
| 9 (Temperature resistance min deg C 80 METHOD A
ASTM D2485) |
3000.0 |
|
| 10 (Non Volatile Matter % By mass Component-A (Base)) |
1000.0 |
|
| 11 (Non Volatile Matter % By mass Component-B (Hardener)) |
1000.0 |
|
| 12 (Volatile Matter % By mass Component-A (Base)) |
500.0 |
|
| 13 (Volatile Matter % By mass Component-B (Hardener)) |
500.0 |
|
| 14 (Specific Gravity Component-A (Base)) |
500.0 |
|
| 15 (Specific Gravity Component-B (Hardener)) |
500.0 |
|
| 16 (Ash content Component-A (Base)) |
1000.0 |
|
| 17 (Ash Content % By mass Component-B (Hardener)) |
1000.0 |
|
| 10 (weight per litre in kg/litre) |
500.0 |
|
| 11 (Abrasion Resistance(ASTM D4060)1000gm load/1000Cycles
CS17 wheel or CS 10 wheel) |
2000.0 |
|
|
| 2901 |
National Test House (WR), Mumbai
| JAPANESE INDUSTRIAL STANDARD JIS K 5659 (2018) - JAPANESE INDUSTRIAL STANDARD JIS K 5659 -Long Durable Paints for Steel Structures |
JAPANESE INDUSTRIAL STANDARD JIS K 5659 -Long Durable Paints for Steel Structures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4 (Condition inside container
As per 4.1.2 a of JIS K5600-1-1) |
1200.0 |
|
| 7.5 (Low temperature stability at (-5 deg.C) As per 3.3.7 of JIS K5600-1-1) |
5000.0 |
|
| 7.6 (Surface Drying Property as per JIS K 5600) |
1200.0 |
|
| 7.7 (Appearance of the Film ( As per of JIS K5600-1-1 )) |
1200.0 |
|
| 7.8 (Pot life) |
1500.0 |
|
| 7.10 (Specular Gloss (60º) as per JIS K5600-4-7) |
1200.0 |
|
| 7.11 (Overcoatability) |
1200.0 |
|
| 7.12 (Flexibility 10 mm dia mandrel of type I tester as per JIS 5600-5-1) |
1200.0 |
|
| 7.13 (Falling weight Resistance 300 gram weight& drop height 500 mm (As per JIS K 5600-5-3)) |
1500.0 |
|
| 7.14 (Interlayer adhesion-I(between undercoat and intermediate coat)) |
2000.0 |
|
| 7.15 (Interlayer adhesion-II(between Intermediate coat & top coat)) |
2000.0 |
|
| 7.16 (Alkali Resistance (dilute Calcium Hydroxide),Immersing method, for 168 Hours at 23 ±1 Deg c) |
1500.0 |
|
| 7.17 (Acid Resistance (dilute Sulfuric Acid 5gram per litre),Immersing method, for 168 Hours at 23 ±1 Deg c) |
1500.0 |
|
| 7.19 (Non Volatile Matter content % As per JIS K 5601-1-2) |
1200.0 |
|
| 7.20 (Accelerated weathering Resistance- Xenon arc Exposure period 2000 hours
As per of JIS K5600-7-7) |
120000.0 |
|
| 7.20 b (Accelerated weathering Resistance by Xenon arc Exposure period 500 hours) after 24 Months Natural Weathering Resistance test (As per of JIS K5600-7-7)) |
15000.0 |
|
| 7.21 (Natural Weathering Resistance
(for 24 Months) as per JIS K 5600-7-6) |
20000.0 |
|
| JIS K 5659 (Please refer annexure for test results) |
1.0 |
|
| 7.18 (Humidity and Cool-Heat Cycling Resistance Test Condition :Immersion in water at 23 Deg C for 18 hours followed by cooling at -20 deg C for 03 Hours ,Heat at 50 deg C for 03 hours (10 Cycles)) |
10000.0 |
|
| JIS K 5659 (Scratch Hardness test (IS 101 (Part 5/Sec 2))) |
1200.0 |
|
| JIS K 5659 (Adhesion, Cross Cut) |
1500.0 |
|
| JIS K 5659 (Mix density, (IS 101 (Part 1/Sec 7)) |
1200.0 |
|
| JIS K 5659 (Dry Film Thickness (DFT) (IS 101 (Part 3/Sec 2)) |
1200.0 |
|
| 7.9 (Contrast ratio %) |
2000.0 |
|
|
| 2902 |
National Test House (NWR), Jaipur
| IS 9537 : Part 2 (1981) - Specification for conduits for electrical installations: Part 2 rigid steel conduits |
Specification for conduits for electrical installations: Part 2 rigid steel conduits |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2903 |
National Test House (WR), Mumbai
| 13209 (2024) - Indelible Ink-Specification |
Indelible Ink-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Description) |
1000.0 |
|
| 3.3 (Colour) |
1000.0 |
|
| 3.4 (pH) |
1000.0 |
|
| 3.5 (Total solids) |
1000.0 |
|
| 3.6 (Development) |
1000.0 |
|
| 3.7.1 (Performance- Resistance to Bleaching) |
1000.0 |
|
| 3.7.2 (Performance- Resistance to organic solvents) |
1000.0 |
|
|
| 2904 |
National Test House (ER), Kolkata
| NTH ER PAINT LAB CUSTOMER SPECIFICATION (2012) - PAINT ,RFU,FINISHING,MATT AIR DRYING BRUSHING /SPRAYING |
PAINT ,RFU,FINISHING,MATT AIR DRYING BRUSHING /SPRAYING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Film strength at impact
Impact Resistance Test
(ASTM D 2794)) |
2000.0 |
|
| 2 (Hardness test: Pencil Hardness test
IS:101(part 5/Sec1)1988
(Reaffirmed2019).) |
1000.0 |
|
| 3 (Scratch Hardness test (1500 g weight) for pencil hardness up to 2H
IS 101 Part 5 sec 2 RA 2019) |
1000.0 |
|
| 4 (Drying Time a) Surface Dry
IS 101 (Part 3/sec 1), 1986) |
1000.0 |
|
| 5 (Drying Time b) Hard Dry &tack free
IS 101 (Part 3/sec 1), 1986) |
1000.0 |
|
| 6 (Specular Gloss at 60 º IS 101 (Part 4/Sec 4)) |
1000.0 |
|
| 7 (Finish
IS 101 part 3 sec 4,1987) |
1000.0 |
|
| 8 (Fineness of Grind ,in microns
IS 101 part 3 section 5) |
1000.0 |
|
| 9 (Mass in kg/10 ltrs
IS 101 part 1 sec 7) |
1000.0 |
|
| 10 (Accelerated Weathering Test
QUV –UVA lamp 340 nm
For10 days(at Basic Climate Condition) MIL Std -810-G) |
20000.0 |
|
| 11 (Resistance to Petrol -Benzene Mixture Immersion test
jSS-8010-82:2012,Appendix -D.) |
2000.0 |
|
| 12 (Resistance to Warm water
jSS-8010-82:2012,Appendix-E) |
1000.0 |
|
| 13 (Accelerated Storage Stability Duration 96 hours at 60 Deg .C
jSS-8010-82:2012,Appendix -C.) |
2000.0 |
|
| 14 (Resistance to salt Water:- 7 Cycles JSS-8010-82:2012,Appendix -F.
Test Condition (one Cycle):-One Hour immersion in salt water Three Hours outside exposure at angle of 45 Deg Facing south then one hour refrigeration at 4 plus minus 2 Deg C then again exposued angle of 45 Deg Facing south till next cycle) |
3500.0 |
|
| 15 (Resistance to Lubricating oil (immersion test for 2 hours at 50 Deg c
jSS-8010-82:2012,Appendix -A.) |
1000.0 |
|
| 16 (Resistant to heat (at 150 deg c for 2 hours)
JSS-8010-82:2012,Appendix-B) |
1000.0 |
|
| 17 (Resistance to low temperature for 120 hours at-20 deg c (+/- 0.1 deg c )) |
5000.0 |
|
| 18 (Accelerated weathering Test
Xenon Radiation For 30days
as per moderate climatic conditions.
MIL STD -810-G.) |
40000.0 |
|
| 6 (ANTI GRAFFITI PROPERTIES
ASTM D 6578) |
5000.0 |
|
| 1.2 (COVERING STRENGTH
covering strength must be tested on a Garmsen clear glass plate with a
minimum dry film thickness applied according to WN 11500 over a black and
white contrast card. There may be no visible contrast between the black and
white backgrounds.) |
2500.0 |
|
|
| 2905 |
National Test House (NR), Ghaziabad
| IS 6911 (2017) - Stainless Steel Plate, Sheet and Strip - Specification |
Stainless Steel Plate, Sheet and Strip - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6,Table 3 Chemical Composition (Tests as per Annexure ( Chemical Composition )- NON NABL) |
1000.0 |
|
| 6,Table 3 Chemical Composition (Tests as per Annexure ( Chemical Composition )) |
5000.0 |
|
|
| 2906 |
National Test House (NR), Ghaziabad
| RDSO-Poly Ring (2022) - Poly Ring |
Poly Ring |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Compression Load) |
8000.0 |
|
| 2 (Material Identification) |
4980.0 |
|
|
| 2907 |
National Test House (NER), Guwahati
| IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification |
Coarse and fine aggregate for Concrete for concrete-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 (Test for Combined Flakiness and Elongation Index
( IS:2386(part -I)1963)) |
3000.0 |
|
| 4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963)) |
2000.0 |
|
| 2 (Test for Specific Gravity ( IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption ( IS:2386(part -III)1963)) |
1000.0 |
|
| 13 (Test for Soundness of Aggregate(IS 2386(5):1963)) |
2000.0 |
|
| 7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963)) |
500.0 |
|
| 8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963)) |
500.0 |
|
| 11 (Test for Surface moisture(IS 2386(3):1963)) |
1000.0 |
|
| 14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method) |
3000.0 |
|
| 5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 12 (Test for Deleterious Materials(IS 2386(Part 2):1963)) |
2000.0 |
|
|
| 2908 |
National Test House (NER), Guwahati
| IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386] |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Combined Elongation Index and Flakiness Index) |
3000.0 |
|
| 5.4.2 (IS:2386(Pt.-4)_Impact Value, %) |
1500.0 |
|
| 5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %) |
1500.0 |
|
| 6 (IS:2386(Pt.-1)_Sieve Analysis) |
2000.0 |
|
| 5.7 (Specific Gravity) |
500.0 |
|
| 5.7 (Water Absorption) |
1000.0 |
|
| 6.3 (Gradation for Fine Aggregate) |
2000.0 |
|
| 5.7 (Specific gravity) |
500.0 |
|
| 5.7 (Water Absorption) |
1000.0 |
|
| 5.5 (IS:2386(Pt.-5)_Soundness) |
2000.0 |
|
|
| 2909 |
National Test House (SR), Chennai
| IS 2720 : Part 4 (1985) - Methods of test for soils: Part 4 grain size analysis (Second Revision) |
Methods of test for soils: Part 4 grain size analysis (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Grain size analysis manual) |
5000.0 |
|
|
| 2910 |
National Test House (WR), Mumbai
| IRS : TC 30-05 - UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS |
UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5.1 (The diameter of the conductor shall be measured on the finished sample. The measurement shall be made atleast at three different points with two readings at 90 degree along the length of the sample.) |
1.0 |
|
| 5.5.2 (A sample of wire taken from finished cable, when tested shall have elongation at fracture of not less than 23 d for diameter O.9 mm) |
1.0 |
|
| 5.7.1 (Determination of the thickness of insulation of round cores and sheath shall be made on a
representative sample of the cable approximately one meter long taken from the drum length of the cable.) |
1.0 |
|
| 5.7.2 (The measurement in case of conductor insulation, inner, intermediate and outer sheath shall
be made at three different points at interval of not less than 75 mm along the length of the
sample and at each point the minimum thickness or the'insulation inner, intermediate &
outer sheath shall be measured along with two more readings made at equidistant points
around the periphery.) |
1.0 |
|
| 3.8.3 (The number and the size of the aluminium wires/strips used for screening shall be such as to comply with the requirements of Cl 5.9.9) |
200.0 |
|
| 3.8.4 (The layer of the aluminium wires/ strips used for screening shall be compact and the length of the lay shall be high.) |
200.0 |
|
| 3.8.5 (The minimum tensile strength of Aluminium screen shall be 15 Kg/ Sqmm) |
200.0 |
|
| 3.8.6 (The innermost layer of the screening shall have left hand lay and the sucessive layer shall be laid with opposite lay.) |
200.0 |
|
| 3.8.7 (Drift expansion test to IS 2335-1985 shall be carried out on a test piece of length twice the external dia of the tube by conical mandrel having height three times its base diameter.) |
200.0 |
|
| 3.8.8 (Flattening test to IS. 2328- 1983 shall be carried out on a test piece of not less than 50 mm long cut from each selected tube.) |
200.0 |
|
| 3.9.1 (The aluminium screen shall be wrapped with a single layer of woven tape impregnated with Barium Chromate with minimum 20% overlap.) |
500.0 |
|
| 3.9.2 (The tape used shall be fine woven cloth tape of about 0.15 mm thickness.) |
200.0 |
|
| 3.10.7 (The test shall be conducted on PVC intermediate sheath in accprdance with BS 6169 or any approved method.) |
1000.0 |
|
| 5.8.1.1 (The test shall be conducted in accordance with the procedure laid down in IS 10810 (Part-7)) |
500.0 |
|
| 5.8.1.2 (The values after ageing for tensile strength and % elongation shall not be less than given in Cl 5.8.1) |
500.0 |
|
| 5.8.1.3 (The values of all the four samples in case of each sheath shall be averaged and then % variation calculated.) |
1.0 |
|
| 5.8.1.4 (For acceptance test, the sample shall be kept in air oven at 130 deg C for 5 hours) |
1000.0 |
|
| 5.8.1.5 (Tensile strength and Elongation at break for polythene sheath and insulation shall be carried out before ageing only) |
500.0 |
|
| 5.8.2.1 (No crack should occur) |
500.0 |
|
| 5.8.2.2 (For PVC intermediate and outer sheath shrinkage shall not exceed 2% of original length and temperature shall be 150 Deg C for 15 min.) |
1000.0 |
|
| 5.8.2.3 (For PE insulation temp shall be 100 Deg C for a period of 24 hrs and average shrinkage of 4 samples of length 150 mm of each colour of insulation shall not exceed 6.35 mm.) |
1000.0 |
|
| 5.8.2.4 (A sample shall be cut from the cable sheath, 50 mm long measured along the axis. 12 mm wide and the same thickness as the cable sheath) |
1000.0 |
|
| 5.8.11 (The test to be conducted in accordance with the procedure laid down in IS 10810 (Part 60)) |
500.0 |
|
| 5.8.22 (Visual Inspection and Marking) |
100.0 |
|
| 5.9.1 (HV Test to be carried out) |
2000.0 |
|
| 5.9.2 (Insulation resistance Test) |
1000.0 |
|
| 5.9.3 (Conductor Resistance Test) |
1.0 |
|
| 5.8.2.3 (Shrinkage Test of PE Insulation) |
1000.0 |
|
|
