| 2971 |
National Test House (WR), Mumbai
| IS 9537 ( Part 3) (1983) - Specification for conduits for electrical installations ( Part 3) rigid plain conduits of insulating materials. |
Specification for conduits for electrical installations ( Part 3) rigid plain conduits of insulating materials. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 14.1 (All tests constituted under type tests) |
12500.0 |
|
| 14.2 (All tests constituted under acceptance tests) |
8000.0 |
|
| 12.0 (ELECTRICAL CHARACTERISTICS:-
Insulation Resistance) |
2000.0 |
|
| 6.2 (Durability of Marking) |
1000.0 |
|
| 7.4 (Uniformity of Wall Thickness) |
1000.0 |
|
| 8.0 (Construction) |
1000.0 |
|
|
| 2972 |
National Test House (NR), Ghaziabad
| IS:3025 - Methods of sampling and test (Physical & chemical) for water and waste water |
Methods of sampling and test (Physical & chemical) for water and waste water |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| CL 8 (Part 44,58,11,16 &17 ) Essential Parameters (Please see Annexure) |
12000.0 |
|
| 6,Table1 ICP-OES Elements (Please see Annexure) |
7000.0 |
|
| Cl 8 Essential Parameters as per NMCG Requirement (Cl 8 -Essential Parameters as per NMCG Requirement (Please see Annexure)) |
10000.0 |
|
| APHA-23 edition Microbiological Parameters as per NMCG(Please see Annexure) (APHA-23 edition Microbiological Parameters as per NMCG(Please see Annexure)) |
2000.0 |
|
|
| 2973 |
National Test House (NR), Ghaziabad
| IS 13730(Part-9):1994,Reaffirmed 2005. (1994) - Specification for Particular Types of Winding Wires:Polyester Enamelled Round Aluminium Wire, Class 130 |
Specification for Particular Types of Winding Wires:Polyester Enamelled Round Aluminium Wire, Class 130 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dimensions) |
1000.0 |
|
| 5 (Electrical Resistance) |
2000.0 |
|
| 6 (Elongation) |
9000.0 |
|
| 9 (Heat Shock) |
500.0 |
|
| 4 (Dimensions) |
1000.0 |
|
| 13 (Break Down Voltage Test( At Room Temperature)) |
3000.0 |
|
| 8 (Mandrel winding test) |
1500.0 |
|
| 8 (Stretching test) |
1500.0 |
|
| Tests (i)Measurement of diameter of conductor, ii)Measurement of increase in diameter,iii)Measurement of overall diameter,iv)Mandrel Winding Test,v)Weight check.) |
4500.0 |
|
|
| 2974 |
National Test House (WR), Mumbai
| IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17.3 (Marking) |
- |
|
| 15.4 (Armour resistance test for mining cables) |
2500.0 |
|
| 15.4 (Cold impact test) |
1500.0 |
|
| 15.4 (Cold bend test) |
1000.0 |
|
| 15.2 (a) (Annealing test ( for copper )) |
- |
|
| 15.1 (a) ii (Tensile Test ) |
500.0 |
|
| 15.1 (a) iii (Wrapping test) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Red ) |
500.0 |
|
| 15.1 (b) 1 (Dimensions) |
1000.0 |
|
| 15.1 (b) 2 i (Tensile strength) |
500.0 |
|
| 15.1 (b) 2 ii (Elongation at break) |
1000.0 |
|
| 15.1 (b) 2 iii (Torsion test for round wires) |
500.0 |
|
| 15.1 (b) 2 iv (Winding test for formed wire) |
1000.0 |
|
| 15.1 (b) 2 v (Uniformity of Zinc Coating) |
1000.0 |
|
| 15.1 (b) 2 vi (Mass of Zinc coating) |
2000.0 |
|
| 15.1 (b) 2 vii (Resistivity) |
250.0 |
|
| 15.1.C (Average thickness of sheath) |
250.0 |
|
| 15.1.C (Average thickness of insulation) |
250.0 |
|
| 15.1.C (Minimum thickness of sheath) |
250.0 |
|
| 15.1.C (Minimum thickness of insulation) |
250.0 |
|
| 15.1.d i (Tensile strength at break-R) |
250.0 |
|
| 15.1.d i (Tensile strength at break-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-R) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-R) |
250.0 |
|
| 15.1.d.v (Water ahsorption (Gravimetric)) |
250.0 |
|
| 15.1.e iii (Loss of mass in air oven) |
500.0 |
|
| 15.1.e i (Tensile strength at break) |
250.0 |
|
| 15.1.e i (Elongation at break) |
1000.0 |
|
| 15.1.e iii (Loss of mass in air oven) |
500.0 |
|
| 15.1.e iv (Shrinkage test) |
500.0 |
|
| 15.1.e vi (Hot deformation test Depth of indentation,) |
500.0 |
|
| 15.1.e vi (Heat shock test) |
1000.0 |
|
| 15.1.e vii (Thermal stability) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-R) |
500.0 |
|
| 15.2 (g) (Volume resistivity at maximum rated temperature ) |
500.0 |
|
| 15.1.g (High Voltage test at room temperature) |
250.0 |
|
| 15.1.h (Flammability Test) |
250.0 |
|
| 15.1.1.c1 (a) (Oxygen index ) |
3500.0 |
|
| 15.1.1.c1 (b) (Flame retardance test on single cable) |
3500.0 |
|
| 15.1.1.c2 (c) (Flame retardance test on bunched cable) |
3500.0 |
|
| 15.1.1.c1 (d) (Temperature index) |
3500.0 |
|
| 15.1.1.c2 (d) (Optical density of smoke) |
3500.0 |
|
| 15.1.1.c2 (f) (Halogen acid gas evaluation) |
3500.0 |
|
| 3.1 (Conductor) |
100.0 |
|
| 4.1 (Insulation) |
100.0 |
|
| 5.1 (FILLER AND INNER SHEATH) |
100.0 |
|
| 5.2 (Filler and inner sheath) |
100.0 |
|
| 6.1 (Armouring) |
100.0 |
|
| 7.1 (Outer Sheath) |
100.0 |
|
| 8.1 (Conductor) |
100.0 |
|
| 8.2 (Conductor) |
250.0 |
|
| 8.3 (Size of Neutral Conductor) |
- |
|
| 9.1 (Insulation) |
100.0 |
|
| 9.2 (Insulation) |
250.0 |
|
| 9.3 (Insulation) |
250.0 |
|
| 9.4 (Insulation) |
100.0 |
|
| 10.1 (Core Identification) |
100.0 |
|
| 10.2 (CORE IDENTlFICATION) |
100.0 |
|
| 10.3 (CORE IDENTlFICATION) |
100.0 |
|
| 11.1 (LAYING UP Of CORES) |
100.0 |
|
| 12.1 (Inner sheath(Common covering)) |
100.0 |
|
| 12.2 (Inner sheath(Common covering)) |
100.0 |
|
| 12.3 (Inner sheath(Common covering)) |
250.0 |
|
| 13.1 (Armouring) |
100.0 |
|
| 13.3 (Armouring) |
250.0 |
|
| 13.4 (ARMOURING) |
100.0 |
|
| 14.1 (Outer Sheath) |
100.0 |
|
| 14.2 (Outer Sheath) |
250.0 |
|
| 14.3.1 (Outer Sheath) |
1000.0 |
|
| 15.1 (a) iv (Resistance of conductor-Black) |
1000.0 |
|
|
| 2975 |
National Test House (WR), Mumbai
| Custom/Mech/2022 (2022) - Specification for Customer Test request. |
Specification for Customer Test request. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| M1 (Shear Strength test, MPa) |
3000.0 |
|
|
| 2976 |
National Test House (WR), Mumbai
| IS : 7098(Part 1)1988, Reaff 2020 Amdt-5 (1988) - Specification for Cross linked Polyethylene Insulated PVC Sheathed Cable
Part 1 for working voltage upto and Including 1100Volt |
Specification for Cross linked Polyethylene Insulated PVC Sheathed Cable
Part 1 for working voltage upto and Including 1100Volt |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1 (Type Test) |
40000.0 |
|
| 15.2 (Acceptance Test) |
20000.0 |
|
|
| 2977 |
National Test House (NR), Ghaziabad
| MDTS : 094 Rev:01 (2002) - TECH SPECIFICATIONS FOR PAINTING SYSTEM FOR PASSENGER COACHES BUILT AT RCF,KAPURTHALA |
TECH SPECIFICATIONS FOR PAINTING SYSTEM FOR PASSENGER COACHES BUILT AT RCF,KAPURTHALA |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl No. 3.1 FOR PRIMER (Epoxy metal primer) (Please see Annexure) |
25000.0 |
|
| Cl No. 3.2 FOR Polyester based Kniffing Putty (Please see Annexure) |
8000.0 |
|
| Cl No. 3.3 FOR Two component PUR PRIMER (Please see Annexure) |
25000.0 |
|
| Cl No. 3.4 FOR Two component POLYURETHANE UNDERCOAT( PRIMING PAINT)PURER (Please see Annexure) |
12000.0 |
|
| Cl No. 3.5 FOR Two component PUR POLYURETHANE BASED TOP COAT (Please see Annexure) |
35000.0 |
|
| Cl No. 3.6 FOR Two component EpoxyHigh Build Paint ElastifiedR (Please see Annexure) |
40000.0 |
|
|
| 2978 |
National Test House (SR), Chennai
| SOCKS-CUST-TNTB&ESC (2022) - TNTB Technical Specification for socks |
TNTB Technical Specification for socks |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (General) |
100.0 |
|
| 1.2 (Yarn) |
100.0 |
|
| 1.3 (Splicing) |
100.0 |
|
| 1.4 (Linking) |
100.0 |
|
| 1.5 (Colour) |
100.0 |
|
| 2.1 (Foot Length) |
300.0 |
|
| 2.2 (Leg Length) |
300.0 |
|
| 2.3 (Depth of top portion) |
300.0 |
|
| 2.4 (Width of Foot & Leg at Centre) |
300.0 |
|
| 2.5 (Mass per 10 pairs) |
300.0 |
|
| 2.6 (Total number of Wales) |
300.0 |
|
| 3.1 (Dimensional Change due to relaxation, Percent) |
1000.0 |
|
| 3.2 (pH value of Aqueous Extract) |
1000.0 |
|
| 3.3 (Colour Fastness to Light) |
2000.0 |
|
| 3.4 (Colour Fastness to Washing) |
1000.0 |
|
| 3.5 (Colour Fastness to Rubbing) |
1000.0 |
|
| 3.6 (Colour Fastness to Perspiration) |
1000.0 |
|
| 3.7 (Pairing) |
220.0 |
|
|
| 2979 |
National Test House (NR), Ghaziabad
| RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Chapter V (Table 1) (Humidity test.) |
11000.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to water) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to solvents) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to oil) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to 20% caustic potash (weight by volume)) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume)) |
1500.0 |
|
| Chapter V (Table 1) (Gloss at 60 degree angle of incidence) |
1200.0 |
|
| Chapter V (Table 1) (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C) |
1200.0 |
|
| Chapter V (Table 1) (Fineness of grind) |
1200.0 |
|
| Chapter V (Table 1) (Theoretical Spreading rate) |
1200.0 |
|
| Chapter V (Table 1) (Pot life(After induction time)ii) 40 ± 2 Deg C) |
2000.0 |
|
| Chapter V (Table 1) (Pot life (After induction time) at i) 27 ± 2 Deg C) |
1500.0 |
|
| Chapter V (Table 1) (Mass in Kg/10 litres) |
1200.0 |
|
| Chapter V (Table 1) (Keeping Properties for both the packs) |
5000.0 |
|
| Chapter V (Table 1) (Flash Point (b) Component B) |
1200.0 |
|
| Chapter V (Table 1) (Flash Point (a) Component A) |
1200.0 |
|
| Chapter V (Table 1) (Flexibility & Adhesion (6.25mm mandrel)) |
1200.0 |
|
| Chapter V (Table 1) (Scratch hardness (1.5 Kg LOAD)) |
1200.0 |
|
| Chapter IV / Table I (Volume solids) |
2000.0 |
|
| Chapter V (Table 1) (Dry film thickness/Per coat) |
1200.0 |
|
| Chapter V (Table 1) (Colour) |
1200.0 |
|
| Chapter V (Table 1) (Finish) |
1200.0 |
|
| Chapter V (Table 1) (Consistency) |
1200.0 |
|
| Chapter V (Table 1) (Drying time c) Hard Dry at 70 Deg C) |
1200.0 |
|
| Chapter V (Table 1) (Drying time b) Hard Dry) |
1200.0 |
|
| Chapter V (Table 1) (Drying time a) Surface Dry) |
1200.0 |
|
| Chapter V (Table 1) (Identification of polyisocyanates) |
3000.0 |
|
|
| 2980 |
National Test House (NR), Ghaziabad
| IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass) |
3000.0 |
|
| 5.1.1 b Chemical composition (Copper (as Cu)content,% by mass) |
500.0 |
|
| 5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass) |
500.0 |
|
| 5.1.1 d Chemical composition (Silicon (as Si) content,% by mass) |
500.0 |
|
| 5.1.1 e Chemical composition (Iron (as Fe) content,% by mass) |
500.0 |
|
| 5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass) |
500.0 |
|
| 5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass) |
500.0 |
|
| 5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass) |
500.0 |
|
| 5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass) |
500.0 |
|
| 5.1.1 j Chemical composition (Vanadium (as V) content,% by mass) |
500.0 |
|
| 7 (Dimension) |
1000.0 |
|
| 9.1 (Tensile Strenth) |
2000.0 |
|
| 9.1 (0.2% Proof Stress) |
1000.0 |
|
| 9.1 (Elongation) |
1000.0 |
|
| 0 (Anodic Coating) |
2000.0 |
|
| 5 (Chemical composition, % by mass) |
6000.0 |
|
| 0 (Weight, kg) |
1000.0 |
|
|
| 2981 |
National Test House (NR), Ghaziabad
| RDSO Drg.No. SK-94254 Alt-3 /IS:1030 - CARBON STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES |
CARBON STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl no. 8.1 Table 1 (Carbon) |
1200.0 |
|
|
| 2982 |
National Test House (WR), Mumbai
| 14927 (2001) - Cable Trunking and Ducting Systems for
Electrical Installations, Part 2: Cable Trunking and
Ducting Systems Intended for Mounting on Walls or Ceiling
[ETD 14: Electrical Wiring Accessories] |
Cable Trunking and Ducting Systems for
Electrical Installations, Part 2: Cable Trunking and
Ducting Systems Intended for Mounting on Walls or Ceiling
[ETD 14: Electrical Wiring Accessories] |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Tests as per IS 14927-2 (2001)) |
20000.0 |
|
|
| 2983 |
National Test House (ER), Kolkata
| Custom-7-ER-LM - Galvanized Steel Rope Net Wire |
Galvanized Steel Rope Net Wire |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Breaking Force of Rope) |
3000.0 |
|
| 2 (Punching Resistance of Steel Wire Rope Net) |
2000.0 |
|
| 3 (Rope Size) |
1000.0 |
|
| 4 (Mass) |
1500.0 |
|
| 5 (Mass of Zinc Coating) |
2000.0 |
|
| 6 (Carbon) |
500.0 |
|
| 6 (Sulphur) |
500.0 |
|
| 6 (Phosphorus) |
500.0 |
|
| 6 (Manganese) |
1000.0 |
|
| 6 (Silicon) |
1000.0 |
|
| 7 (Tensile Strength of Element wire) |
3000.0 |
|
|
| 2984 |
National Test House (ER), Kolkata
| IS/IEC 60529,IS 16102 & LM79 - Light Candela Test
Ingress of protection IP-65
Light test as per IS 16102 |
Light Candela Test
Ingress of protection IP-65
Light test as per IS 16102 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Light Candela test on LED Aviaton Obstruction Light) |
10000.0 |
|
| 2 (Ingress of Protection IP-65 Test as per IS/IEC 60529) |
15000.0 |
|
| 3 (Light Test as Per IS 16102) |
20000.0 |
|
|
| 2985 |
National Test House (ER), Kolkata
| ISTA 1G - Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS |
Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ISTA 1G (Random Vibration Test on the lines of ISTA-1G non operational with Packing of 6 kVA UPS
Overall Grms level of 1.15
Face 3 on Table surface for 30 min
Face 1 on table surface for 10 min.
Face 2 or 4 on table surface for 10 minutes
Face 5 or 6 on table surface for 10 min.) |
20000.0 |
|
| ISTA 1G (Drop Test On the lines of ISTA 1G Specification) |
10000.0 |
|
|
| 2986 |
National Test House (ER), Kolkata
| IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass) |
3000.0 |
|
| 5.1.1 b Chemical composition (Copper (as Cu)content,% by mass) |
500.0 |
|
| 5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass) |
500.0 |
|
| 5.1.1 d Chemical composition (Silicon (as Si) content,% by mass) |
500.0 |
|
| 5.1.1 e Chemical composition (Iron (as Fe) content,% by mass) |
500.0 |
|
| 5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass) |
500.0 |
|
| 5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass) |
500.0 |
|
| 5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass) |
500.0 |
|
| 5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass) |
500.0 |
|
| 5.1.1 j Chemical composition (Vanadium (as V) content,% by mass) |
500.0 |
|
| 7 (Dimension) |
1000.0 |
|
| 9.1 (Tensile Strenth) |
2000.0 |
|
| 9.1 (0.2% Proof Stress) |
1000.0 |
|
| 9.1 (Elongation) |
1000.0 |
|
|
| 2987 |
National Test House (ER), Kolkata
| Custom-6-NTH-LM - G.I Welded Wire Mesh |
G.I Welded Wire Mesh |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Weld Shear Test of Wire Mesh) |
2000.0 |
|
| 2 (Tensile Strength of G.I Wire) |
1500.0 |
|
| 3 (Mass of Zinc Coating of G.I Wire) |
2000.0 |
|
| 4 (Weld Penetration) |
2000.0 |
|
| 5 (Yield Strength of G.I Wire) |
1500.0 |
|
| 6 (Dimension) |
4000.0 |
|
| 7 (Tensile strength of Galvanized steel Longitudinal wire) |
1000.0 |
|
| 8 (Yield stress of Galvanized steel Longitudinal wire) |
1000.0 |
|
| 9 (Percentage of Area Reduction of G.I Wire) |
1500.0 |
|
| 10 (Bend Test of G.I Wire) |
1000.0 |
|
| 11 (Tensile strength of Galvanized steel Transverse wire) |
1000.0 |
|
| 12 (Yield stress of Galvanized steel Cross wire) |
1000.0 |
|
| 13 (Percentage of Area Reduction of Galvanized steel Transverse wire) |
1000.0 |
|
| 14 (Bend Test of Galvanized steel Cross wire) |
1000.0 |
|
| 15 (Mass of Zinc Coating of Galvanized steel Longitudinal wire) |
2000.0 |
|
| 16 (Mass of Zinc Coating of Galvanized steel Transverse wire) |
2000.0 |
|
| 17 (Carbon) |
500.0 |
|
| 18 (Sulphur) |
500.0 |
|
| 19 (Phopshorus) |
500.0 |
|
| 20 (Manganese) |
500.0 |
|
| 21 (Silicon) |
500.0 |
|
|
| 2988 |
National Test House (NR), Ghaziabad
| IS 2039(Part1 to 3) (1991) - Steel Tubes for Bicycle and Cycle Rickshaws |
Steel Tubes for Bicycle and Cycle Rickshaws |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Dimensions) |
20000.0 |
|
|
| 2989 |
National Test House (ER), Kolkata
| MMDTS 19021 (2020) - Schedule of Technical Requirements for Fire Barrier Cloth for Seats and Berths Meeting FST(Fire Smoke and Toxicity) Properties to EN45545 HL3 for Passenger Coaches. |
Schedule of Technical Requirements for Fire Barrier Cloth for Seats and Berths Meeting FST(Fire Smoke and Toxicity) Properties to EN45545 HL3 for Passenger Coaches. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.5.1.1 (Weight) |
1000.0 |
|
| 2.5.1.2 (Thickness) |
1000.0 |
|
| 2.5.1.3a (Tensile Strength,CD) |
1000.0 |
|
| 2.5.1.3b (Tensile strength,MD) |
1000.0 |
|
| 2.5.1.4a (Tear Resistance,CD) |
1000.0 |
|
| 2.5.1.4b (Tear Resistance,MD) |
1000.0 |
|
| 2.5.1.5a (Elongation at 100 N,CD) |
500.0 |
|
| 2.5.1.5b (Elongation at 100 N,MD) |
500.0 |
|
|
| 2990 |
National Test House (NWR), Jaipur
| IRS-GE-I, JUNE-2016 (2016) - SPECIFICATIONS FOR TRACK BALLAST |
SPECIFICATIONS FOR TRACK BALLAST |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.3 (Size and Gradation (IRS-GE-I, JUNE-2016)) |
2000.0 |
|
| 2.2.3 (Water absorption (IS 2386 (Part III):1963)) |
1000.0 |
|
| 2.2.1 (Aggregate abrasion value-Annexure I of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963) |
1500.0 |
|
| 2.2.2 (Aggregate Impact Value-Annexure II of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963) |
1500.0 |
|
|
| 2991 |
National Test House (NR), Ghaziabad
| JIS K 5659:2018 (2018) - LONG DURABLE PAINTS FOR STEEL STRUCTURES |
LONG DURABLE PAINTS FOR STEEL STRUCTURES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 5 Table 2 Top Coat Type A (Please see Annexure) |
40000.0 |
|
| Clause 5 Table 2 Intermediate CoatType A (Please see Annexure) |
40000.0 |
|
| Clause 5 Table 2 Top Coat Type B (Please see Annexure) |
1.0 |
|
| Clause 5 Table 2 Type B Intermediate Coat (Please see Annexure) |
1.0 |
|
| 5 Table 2 LONG DURABLE PAINTS FOR STEEL STRUCTURES ( ZINC RICH PRIMER) TYPE A (Please see Annexure) |
55000.0 |
|
| 5 Table 2 (LONG DURABLE PAINTS FOR STEEL STRUCTURES( Intermediate) TYPE A (Please see Annexure) |
45000.0 |
|
| 5 Table 2 LONG DURABLE PAINTS FOR STEEL STRUCTURES (Undercoat) TYPE A (Please see Annexure) |
20000.0 |
|
| 5 Table 2 LONG DURABLE PAINTS FOR STEEL STRUCTURES( FINISH) TYPE A (Please see Annexure) |
50000.0 |
|
|
| 2992 |
National Test House (ER), Kolkata
| NTHER calibration of 3.5 digit Multi Function Calibrator - Calibration of 3.5 digit Multi-Function Calibrator |
Calibration of 3.5 digit Multi-Function Calibrator |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A.1 (Voltage, Current and Resistance) |
5000.0 |
|
| A.2 (Voltage, Current and Resistance) |
6000.0 |
|
| A.3 (Voltage, Current and Resistance) |
7000.0 |
|
| A.4 (Voltage, Current and Resistance) |
15000.0 |
|
| A.5 (Capacitance) |
2000.0 |
|
| A.6 (Frequency) |
2000.0 |
|
| A.7 (Temperature) |
5000.0 |
|
|
| 2993 |
National Test House (ER), Kolkata
| NTHER Calibration of Power Analyzer - Calibration of Power Analyzer |
Calibration of Power Analyzer |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A.1 (Voltage, Current, Power Factor and Power) |
4500.0 |
|
| A.2 (Voltage, current, Power factor and Power) |
6000.0 |
|
|
| 2994 |
National Test House (ER), Kolkata
| NTH ER Calibration of Single Phase wattmeter - Calibration of Single Phase wattmeter |
Calibration of Single Phase wattmeter |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A.1 (AC/DC Power) |
1200.0 |
|
| A.2 (AC/DC Power) |
1500.0 |
|
|
| 2995 |
National Test House (ER), Kolkata
| On the lines of IS: 13875 (Part-I) - 1993 & V/I method - Calibration of Relay Test Set |
Calibration of Relay Test Set |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (sec.) |
1200.0 |
|
| A2 (V,A,sec) |
3500.0 |
|
|
| 2996 |
National Test House (ER), Kolkata
| NTH/HV/01 - Calibration of High Voltage Test Set |
Calibration of High Voltage Test Set |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (kV,mA) |
1500.0 |
|
| A2 (kV,mA) |
2000.0 |
|
| A3 (kV,mA) |
3000.0 |
|
| A4 (kV,mA) |
3500.0 |
|
| A5 (kV,mA) |
4000.0 |
|
| A6 (kV,mA) |
5000.0 |
|
| A7 (kV,mA) |
6000.0 |
|
| A8 (kV,mA) |
7000.0 |
|
| A9 (kV,mA) |
8000.0 |
|
| A10 (kV,mA) |
10000.0 |
|
|
| 2997 |
National Test House (NR), Ghaziabad
| IS 894 (2023) - SPECIFICATION FOR HANDLOOM WOOL BLANKETS BRICK RED |
SPECIFICATION FOR HANDLOOM WOOL BLANKETS BRICK RED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 2 (Fibre Composition) |
2000.0 |
|
| Table-1 (Ends per inch) |
1000.0 |
|
| Table-1 (Picks per inch) |
1000.0 |
|
| Table-1 (Breaking Load, kgs) |
2000.0 |
|
| Table-1 (Weight per square meter (GSM)) |
1000.0 |
|
| Table-1 (Type of Weaves) |
1000.0 |
|
| Firm's Requirement (Weight of Blanket, g) |
1000.0 |
|
| Firm's Requirement (Satin Piping Stitching/cms.) |
1000.0 |
|
|
| 2998 |
National Test House (ER), Kolkata
| Custom Specification ER Plastic (2022) - Custom Specification ER Plastic |
Custom Specification ER Plastic |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Thickness) |
1000.0 |
|
| 2 (Length in meter) |
1000.0 |
|
| 3 (GSM) |
1000.0 |
|
| 4 (Identification of Polymer) |
4000.0 |
|
| 5.0 (Tensile Strength at Break) |
2000.0 |
|
| 6.0 (Elongation at Break) |
1000.0 |
|
| 7.0 (Specific Gravity) |
1000.0 |
|
| 8.0 (Water Absorption ( Kept in water for 4 hrs.)) |
1000.0 |
|
| 9.0 (Melting Point) |
1000.0 |
|
| 10.0 (Inherent Viscosity) |
2000.0 |
|
| 11.0 (Hardness(Shore D)) |
1000.0 |
|
| 12.0 (Compressive Strength(At a pressure of 10 Mpa)) |
2000.0 |
|
| 13.0 (Compressive Strength (At a pressure of 18 Mpa)) |
2000.0 |
|
| 14. (Flammability - IS:11731(Part-1)FH Method) |
5000.0 |
|
| 15. (Flammability - IS 11731(Part-2)FV Method) |
5000.0 |
|
| 16 (Notch Impact Strength) |
2000.0 |
|
| 17 (Tensile Modulus) |
2000.0 |
|
| 18 (Fire Behaviour) |
5000.0 |
|
| 19 (Colour Resistance to Xenon Exposure(192 hrs)) |
9600.0 |
|
| 20 (Flammability Test) |
5000.0 |
|
| 21 (Flexural Strength) |
2000.0 |
|
| 22 (Resistance to HCL(10%) 7-days at room temp.) |
2000.0 |
|
| 23 (Resistance to Sulphuric Acid(10%) 7-days at room temp.) |
2000.0 |
|
| 24 (Resistance to Sodium Hydroxide(10%)7-days at room temp.) |
2000.0 |
|
| 25 (Resistance to Ammonium Hydroxide(10%)7-days at room temp.) |
2000.0 |
|
| 26 (Resistance to Sodium Chloride(10%)7-days at room temp.) |
2000.0 |
|
| 27 (Resistance to Petrol 7-days at room temp.) |
2000.0 |
|
| 28 (Resistance to Lime Water 7-days at room temp.) |
2000.0 |
|
| 29 (Tear Strength) |
3000.0 |
|
| 30 (Low Temperature bend(-2 deg.C)) |
2000.0 |
|
| 31 (Linear Dimensional Change) |
2000.0 |
|
| 32 (Puncture Resistance) |
2000.0 |
|
| 33 (Resistance under Water Pressure) |
2000.0 |
|
| 34 (Hardness (Shore A)) |
1000.0 |
|
| 35 (Dimension) |
1000.0 |
|
| 36 (Physical Appearance) |
1000.0 |
|
| 37 (Bulk Density) |
1000.0 |
|
| 38 (Ash Content) |
2000.0 |
|
| 39 (Compressive Strength) |
2000.0 |
|
| 40 (Unnotched Impact Strength) |
2000.0 |
|
| 41 (Dielectric Strength) |
10000.0 |
|
| 42 (Thickness Nominal) |
1000.0 |
|
| 43 (Thickness Lowest) |
1000.0 |
|
| 44 (Melt Flow Index) |
2000.0 |
|
| 45 (Tensile Strength) |
2000.0 |
|
| 46 (Elongation (%)) |
1000.0 |
|
| 47 (Dimensional Stability after warm storage for 1hr/100 deg.C) |
2000.0 |
|
| 48 (Puncture Resistance) |
2000.0 |
|
| 49 (Peel Adhesion Test) |
2000.0 |
|
| 50 (Tacking Test) |
2000.0 |
|
| 51 (Mass per unit Area) |
1000.0 |
|
| 52 (Compressive Strength (N/sq.mm) at 20% deflection.) |
2000.0 |
|
| 52 (Strength of welded seam) |
2000.0 |
|
| 53 (Change in Tensile strength after ageing (80 deg. C for 7 days).) |
3000.0 |
|
| 54 (Change in Elongation at break (80 deg. C for 7 days).) |
1000.0 |
|
| 55 (Dimensional stability (80 deg. C for 7 days).) |
2000.0 |
|
| 56 (General appearance (80 deg. C for 7 days).) |
1000.0 |
|
| 57 (Constant Pressure head of water of 900 mm.) |
2000.0 |
|
| 58 (Water absorption in 7-days.) |
2000.0 |
|
| 59 (Light Transmission) |
2000.0 |
|
| 60 (60 degree Gloss) |
1000.0 |
|
| 61 (Whiteness Index (Reflective)) |
1000.0 |
|
| 62 (Substrate) |
2000.0 |
|
| 63 (Film Color) |
500.0 |
|
| 64 (Adhesive) |
500.0 |
|
| 65 (Adhesive Color) |
500.0 |
|
| 66 (Liner) |
3000.0 |
|
| 67 (Typical Adhesion 24 hours after application) |
1000.0 |
|
| 68 (Chemical Resistance) |
3000.0 |
|
| 69 (Finish) |
500.0 |
|
| 70 (Hardness) |
1000.0 |
|
| 71 (Heat aging (At 150 deg.C for 30 min.)) |
2000.0 |
|
| 72 (Compressive Strength) |
2000.0 |
|
| 73 (Size) |
1000.0 |
|
| 74 (Height) |
1000.0 |
|
| 75 (Weight) |
1000.0 |
|
| 76 (Water Absorption Test) |
2000.0 |
|
| 77 (Bulk factor) |
1000.0 |
|
| 78 (Flexural Modulus of Elasticity) |
2000.0 |
|
| 79 (Bursting Strength) |
2000.0 |
|
| 80 (Bending Test) |
2000.0 |
|
| 81 (Fire Retardancy Test) |
5000.0 |
|
| 82 (Self Extinguishing Test) |
5000.0 |
|
| 83 (Volume Resistivity) |
5000.0 |
|
| 84 (Tensile Strength before UV exposure) |
2000.0 |
|
| 85 (UV exposure for 1000 hours) |
50000.0 |
|
| 86 (Tensile Strength after UV exposure) |
2000.0 |
|
| Firm's request (Flammability) |
5000.0 |
|
| Firm's request (Glass filler by ash(%)) |
2000.0 |
|
| Firm's request (Water Absorption, %) |
1000.0 |
|
| Firm's request (Tensile Strength) |
1000.0 |
|
| Firm's request (Elongation, %) |
1000.0 |
|
| Firm's request (Colour) |
1000.0 |
|
|
| 2999 |
National Test House (ER), Kolkata
| IS 8427 (1989) - Agricultural Produce Milling Machinery - Rubber Roll for Paddy Dehusker - Specification (First Revision) |
Agricultural Produce Milling Machinery - Rubber Roll for Paddy Dehusker - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1(i) (Outer Diameter) |
1000.0 |
|
| 5.1(ii) (Inner Diameter) |
1000.0 |
|
| 5.1(iii) (Length) |
1000.0 |
|
| 5.1(v) (Key Dimension) |
1000.0 |
|
| 5.1(iv) (No of Keys) |
1000.0 |
|
| 5.2(i) (Outer Diameter) |
1000.0 |
|
| 5.2(ii) (Inner Diameter) |
1000.0 |
|
| 5.2(iii) (Length) |
1000.0 |
|
| 6.1 (Tensile Strength) |
2000.0 |
|
| 6.2 (Elongation) |
1000.0 |
|
| 6.3 (Hardness) |
1000.0 |
|
| 6.4 (Change in Hardness at 90+/-2 deg.C for 2 hrs.) |
2000.0 |
|
| 6.5(i) (Abrasion Resistance) |
2000.0 |
|
| Firm's request. (Adhesion Strength) |
2000.0 |
|
|
| 3000 |
National Test House (WR), Mumbai
| IS 16172 (2023) - Reinforcement couplers for mechanical splices of bars in concrete - Specification |
Reinforcement couplers for mechanical splices of bars in concrete - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Visual Observation (Workmanship and Finish)) |
1000.0 |
|
| 0 (Chemcial Composition of Coupler) |
3500.0 |
|
| 9.2.1 (The tensile strength of the spliced bar ( With Coupling)) |
2500.0 |
|
| 9.2.2 (The minimum percentage elongation at maximum force (also termed as uniform elongation) for spliced bar ( with coupler) when measured in accordance with the method given in Annex B in the reinforcing bar outside the length of the mechanical splice before failure.) |
1000.0 |
|
| 9.2.1 (The tensile strength of the un-spliced specimen from the same bar (Without Coupling)) |
2500.0 |
|
| 9.2.2 (The percentage elongation at maximum force for unspliced specimen) |
1000.0 |
|
| 9.2 (Visual Observation for Nature & Location of failure of spliced specimen (With Coupling).) |
1000.0 |
|
| 8 (Chemical composition, % by mass) |
3000.0 |
|
| 7 (Visual Observation (Workmanship and Finish)) |
1000.0 |
|
|
