| 2851 |
National Test House (ER), Kolkata
| System-1 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - System -1 (F9 + P6+ F6B + F2. Total DFT 345 microns) EIL SPEC B224-000-79-41-PLS-01 REV 6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
System -1 (F9 + P6+ F6B + F2. Total DFT 345 microns) EIL SPEC B224-000-79-41-PLS-01 REV 6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 ("Cyclic Test
Salt Spray : 72 hrs.
Drying in air: 16 hrs.
UV-A340 nm weather meter: 80 hrs.
One cycle: 168 hrs.
(25 cycles at 168 hrs. each cycle)
(ASTM D5894)") |
200000.0 |
|
| 2 ("100% Humidity Test
(ASTM D2247)") |
25920.0 |
|
|
| 2852 |
National Test House (NR), Ghaziabad
| Prefixed 8544 - Optical Fiber cable |
Optical Fiber cable |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2853 |
National Test House (ER), Kolkata
| IS 4990 (2011) - Plywood for concrete shuttering works - Specification (Third Revision) |
Plywood for concrete shuttering works - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Workmanship & Finish- IS 4990:2011,) |
1000.0 |
|
| 10.1.9 (Retention of Preservative Treatment--IS 2753 (Part 1):1991) |
3000.0 |
|
| 10.1.8, Table 3 (Wet Bending Strength--IS 4990:2011 & IS 1734 (Part 11):1983) |
2000.0 |
|
| 10.1.7, Table 2 (Static Bending Strength-IS 1734 (Part 11):1983) |
2000.0 |
|
| 10.1.6 (Tensile Strength-IS 1734 (Part 9):1983) |
2500.0 |
|
| 10.1.5.2 (Glue Adhesion, after Mycological Test-IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983 -) |
500.0 |
|
| 10.1.5.1 (Glue Shear Strength, after Mycological Test-IS 1734 (Part 7):1983 & IS 1734 (Part 4):1983) |
2000.0 |
|
| 10.1.3.1.2 (Glue Adhesion, after, after water resistance-IS 4990:2011 & IS 1734 (Part 5):1983) |
500.0 |
|
| 10.1.3.1.1 (Glue Shear Strength, after Water Resistance-IS 4990:2011 & IS 1734 (Part 4):1983) |
2000.0 |
|
| 10.1.2.2 (Adhesion of Plies in dry state-IS 1734 (Part 5):1983) |
1000.0 |
|
| 10.1.2.1 (Glue Shear Strength in dry state-IS 1734 (Part 4):1983) |
2000.0 |
|
| 10.1.1 (Moisture content-IS 4990:2011 & IS 1734 (Part 1):1983) |
1000.0 |
|
| 7 (Dimension and Tolerances- IS 4990:2011, Annex C) |
1000.0 |
|
|
| 2854 |
National Test House (ER), Kolkata
| IS 4990 : 2011 - PLYWOOD FOR CONCRETE SHUTTERING WORKS — SPECIFICATION |
PLYWOOD FOR CONCRETE SHUTTERING WORKS — SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Dimension) |
2000.0 |
|
| 8 (WORKMANSHIP AND FINISH) |
1000.0 |
|
| 10.1 (Moisture content) |
1000.0 |
|
| 10.1.2.1 (Glue Adhesion in Dry State-Glue shear strength) |
1500.0 |
|
| 10.1.2.2 (Glue Adhesion in Dry State-Adhesion of plies) |
500.0 |
|
| 10.1.3.1.1 (Resistance to Water Test-Glue shear strength) |
1500.0 |
|
| 10.1.3.1.2 Adhesion of plies (Resistance to Water Test -Adhesion of plies) |
1500.0 |
|
| 10.1.4 (Visual observation of sample-after 72 h boiling) |
1000.0 |
|
| 10.1.5 (Mycological Test-Visual inspection of separation at the edges of the veneers) |
1000.0 |
|
| 10.1.5.1 (Mycological Test-Glue shear strength) |
1250.0 |
|
| 10.1.5.2 (Mycological Test-Adhesion of plies) |
1250.0 |
|
| 10.1.6.a. (Tensile Strength-parallel to the grain direction of the face veneers) |
1250.0 |
|
| 10.1.6.b. (Tensile strength-direction at right angles to the grain direction of the face veneers) |
1250.0 |
|
| 10.1.7,Table 2(i)-3 (Static Bending Strength-Modulus of Elasticity (MOE)- Average-[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(i)-4 (Static Bending Strength-Modulus of Elasticity (MOE) -Minimum Individual-[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-3 (Static Bending Strength-Modulus of Elasticity (MOE) -Average-[Across -perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-4 (Static Bending Strength-Modulus of Elasticity (MOE) -Minimum Individual-[Across -perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(i)-5 (Static Bending Strength-Modulus of Rupture (MOR)-Average -[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(i)-6 (Static Bending Strength-Modulus of Rupture (MOR)-Minimum Individual -[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-5 (Static Bending Strength-Modulus of Rupture (MOR)-Average -[Across -perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-6 (Static Bending Strength-Modulus of Rupture (MOR)-Minimum Individual -[Across-Perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.8,Table 3(i)(a)(3) (Wet Bending Strength-Modulus of Elasticity(MOE)-Average(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(i)(b)(3) (Wet Bending Strength-Modulus of Elasticity(MOE)-Minimum Individual(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(a)(3) (Wet Bending Strength-Modulus of Rupture(MOR)-Average(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(b)(3) (Wet Bending Strength-Modulus of Rupture(MOR)-Minimum Individual(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(i)(a)(4) (Wet Bending Strength-Modulus of Elasticity(MOE)-Average(Across the face grain)) |
750.0 |
|
| 10.1.8,Table 3(i)(b)(4) (Wet Bending Strength-Modulus of Elasticity(MOE)-Minimum Individual(Across the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(a)(4) (Wet Bending Strength-Modulus of Rupture (MOR)-Average(Across the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(b)(4) (Wet Bending Strength-Modulus of Rupture (MOR)-Minimum Individual(Across the face grain)) |
750.0 |
|
| 10.1.9 (Retention of Preservative) |
3000.0 |
|
| 7 (Dimension) |
2000.0 |
|
| 8 (WORKMANSHIP AND FINISH) |
1000.0 |
|
| 10.1 (Moisture content) |
1000.0 |
|
| 10.1.2.1 (Glue Adhesion in Dry State-Glue shear strength) |
1500.0 |
|
| 10.1.2.2 (Glue Adhesion in Dry State-Adhesion of plies) |
500.0 |
|
| 10.1.3.1.1 (Resistance to Water Test-Glue shear strength) |
1500.0 |
|
| 10.1.3.1.2 Adhesion of plies (Resistance to Water Test -Adhesion of plies) |
1500.0 |
|
| 10.1.4 (Visual observation of sample-after 72 h boiling) |
1000.0 |
|
| 10.1.5 (Mycological Test-Visual inspection of separation at the edges of the veneers) |
1000.0 |
|
| 10.1.5.1 (Mycological Test-Glue shear strength) |
1250.0 |
|
| 10.1.5.2 (Mycological Test-Adhesion of plies) |
1250.0 |
|
| 10.1.6.a. (Tensile Strength-parallel to the grain direction of the face veneers) |
1250.0 |
|
| 10.1.6.b. (Tensile strength-direction at right angles to the grain direction of the face veneers) |
1250.0 |
|
| 10.1.7,Table 2(i)-3 (Static Bending Strength-Modulus of Elasticity (MOE)- Average-[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(i)-4 (Static Bending Strength-Modulus of Elasticity (MOE) -Minimum Individual-[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-3 (Static Bending Strength-Modulus of Elasticity (MOE) -Average-[Across -perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-4 (Static Bending Strength-Modulus of Elasticity (MOE) -Minimum Individual-[Across -perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(i)-5 (Static Bending Strength-Modulus of Rupture (MOR)-Average -[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(i)-6 (Static Bending Strength-Modulus of Rupture (MOR)-Minimum Individual -[Along -parallel to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-5 (Static Bending Strength-Modulus of Rupture (MOR)-Average -[Across -perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.7,Table 2(ii)-6 (Static Bending Strength-Modulus of Rupture (MOR)-Minimum Individual -[Across-Perpendicular to the grain direction of the face veneer]) |
750.0 |
|
| 10.1.8,Table 3(i)(a)(3) (Wet Bending Strength-Modulus of Elasticity(MOE)-Average(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(i)(b)(3) (Wet Bending Strength-Modulus of Elasticity(MOE)-Minimum Individual(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(a)(3) (Wet Bending Strength-Modulus of Rupture(MOR)-Average(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(b)(3) (Wet Bending Strength-Modulus of Rupture(MOR)-Minimum Individual(Along the face grain)) |
750.0 |
|
| 10.1.8,Table 3(i)(a)(4) (Wet Bending Strength-Modulus of Elasticity(MOE)-Average(Across the face grain)) |
750.0 |
|
| 10.1.8,Table 3(i)(b)(4) (Wet Bending Strength-Modulus of Elasticity(MOE)-Minimum Individual(Across the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(a)(4) (Wet Bending Strength-Modulus of Rupture (MOR)-Average(Across the face grain)) |
750.0 |
|
| 10.1.8,Table 3(ii)(b)(4) (Wet Bending Strength-Modulus of Rupture (MOR)-Minimum Individual(Across the face grain)) |
750.0 |
|
| 10.1.9 (Retention of Preservative) |
3000.0 |
|
|
| 2855 |
National Test House (ER), Kolkata
| IS/IEC 60571 (2012) - Railway applications-Electronic equipment used on rolling stock |
Railway applications-Electronic equipment used on rolling stock |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.2.11 (Salt Mist test at 35 (+/- 2) deg C for 96 hours
5 % Nacl solution) |
5000.0 |
|
|
| 2856 |
National Test House (ER), Kolkata
| IS 8944 (2005) - Chlorpyrifos, emulsifiable concentrates - Specification (First Revision) |
Chlorpyrifos, emulsifiable concentrates - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3.2 (Acidity (as H2SO4)) |
1000.0 |
|
| 3.3.1 (Chlorpyrifos Content) |
4000.0 |
|
|
| 2857 |
National Test House (ER), Kolkata
| Coal - Coal |
Coal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture (air dried basis)) |
1200.0 |
|
| 2 (Volatile matter, percent by mass (air dried basis)) |
1200.0 |
|
| 3 (Ash content, percent by mass (air dried basis)) |
1200.0 |
|
| 4 (Gross calorific value (as received basis)) |
2000.0 |
|
| 5 (Gross Calorific value (Air dried Basis)) |
2000.0 |
|
| 6 (Ash content (as received basis)) |
1200.0 |
|
| 7 (Fixed Carbon (air dried basis)) |
1200.0 |
|
| 8 (Moisture % by mass, (as received basis)) |
1200.0 |
|
| 0 (Fixed Carbon) |
1000.0 |
|
|
| 2858 |
National Test House (NR), Ghaziabad
| GE: IRS -2 (Final) (2005) - SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS
INCLUDING GUIDELINES FOR LAYING |
SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS
INCLUDING GUIDELINES FOR LAYING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1.C.1 (Test for Non Plastic fines(Particles of size less than 75 micron)(as per GE: IRS -2 (Final))) |
1000.0 |
|
| 4.1.C.2 (Test for Plastic fines(GE: IRS -2 (Final))) |
1000.0 |
|
| 4.1.d (Test for Particle size distribution(GE: IRS -2 (Final))) |
5000.0 |
|
| 4.1.e.1 (Test for Uniformity Co-efficient (Cu) {GE: IRS -2 (Final)}) |
1500.0 |
|
| 4.1.e.2 (Test for Co-efficient of Curvature(CC) (GE: IRS -2 (Final))) |
1500.0 |
|
| Nil (Liquid Limit (IS 2720(5)-1985)) |
1000.0 |
|
| - (Plastic limit (IS 2720(5):1985)) |
1000.0 |
|
| - (Free soil Index(IS 2720(40)1977)) |
1000.0 |
|
| - (DETERMINATION OF WATER CONTENT-DRY DENSITY RELATION (IS 2720(8):1983)
(Proctor test)) |
5000.0 |
|
|
| 2859 |
National Test House (SR), Chennai
| IS 1501 (1996) - Metallography examination - Micro hardness test |
Metallography examination - Micro hardness test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 1501 (Micro Vicker Hardness) |
3000.0 |
|
|
| 2860 |
National Test House (ER), Kolkata
| NTH ER CHEMICAL GENERAL LAB NOV 2022 (2022) - NTH ER CHEMICAL GENERAL LAB NOV 2022 |
NTH ER CHEMICAL GENERAL LAB NOV 2022 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (PHYSICAL APPEARANCE) |
500.0 |
|
| 2 (SOLID CONTENT %) |
1200.0 |
|
| 3 (CHLORIDE CONTENT
(AS PER STANDARD TEST METHOD)) |
1200.0 |
|
| 4 (SPECIFIC GRAVITY) |
1200.0 |
|
|
| 2861 |
National Test House (SR), Chennai
| IRS-T-46-2023 (2023) - INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS |
INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.6 (Microstructure) |
3000.0 |
|
| 7.5 (Carbon (C)) |
500.0 |
|
| 7.5 (Manganese (Mn)) |
500.0 |
|
| 7.5 (Silicon (Si)) |
500.0 |
|
| 11.2 (Phosphorus (P)) |
500.0 |
|
| 11.2 (Tin (Sn)) |
500.0 |
|
| 11.2 (Copper (Cu)) |
500.0 |
|
|
| 2862 |
National Test House (ER), Kolkata
| RDSO Specification no. ETI/PSI/29(12/79) (1979) - Low Tension Distribution Panel for Railway AC Traction Sub-Station. |
Low Tension Distribution Panel for Railway AC Traction Sub-Station. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2(i) (Checking the wiring for correctness and continuity.) |
5000.0 |
|
| 6.2(ii) (Voltage test on the panels & the wiring for withstand voltage of 2000V(r.m.s) to earth for 1 minute.) |
10000.0 |
|
| 6.2(iii) (Insulation Resistance of the complete wiring) |
10000.0 |
|
|
| 2863 |
National Test House (ER), Kolkata
| Custom-22-ER-LM - Steel fibres (Glued hooked double end) |
Steel fibres (Glued hooked double end) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Fibre diameter) |
500.0 |
|
| 2 (Fibre length) |
500.0 |
|
| 3 (Length/Diameter Ratio) |
500.0 |
|
| 4 (Tensile strength) |
3000.0 |
|
| 5 (Manganese) |
1000.0 |
|
| 6 (Sulphur) |
1000.0 |
|
| 7 (Phosphorus) |
1000.0 |
|
| 8 (Silicon) |
1000.0 |
|
| 9 (Aluminium) |
1000.0 |
|
| 10 (Carbon) |
500.0 |
|
|
| 2864 |
National Test House (ER), Kolkata
| ASM Vol.11 (2002) - Failure Analysis and Prevention |
Failure Analysis and Prevention |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASM (Failure investigation of metallic components and suggestions to avoid re occurrence of the failure) |
50000.0 |
|
| ASM (Metalographic examination-Failure investigation (Minimum)) |
25000.0 |
|
|
| 2865 |
National Test House (WR), Mumbai
| Custom specification NTH WR SSPC Paint (2004) - Custom specification NTH WR SSPC Paint, SSPC: The Society for Protective Coatings |
Custom specification NTH WR SSPC Paint, SSPC: The Society for Protective Coatings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Custom specification NTH WR SSPC (Paint 2004) (Please refer annexure) |
100000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Salt Spray test for 5040 hrs) |
151800.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (ACCELERATED WEATHERING (Cyclic Exposure Test), for 5040 hrs, for 30 cycles, each cycle 168 hrs.) |
185000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Pull of Adhesion after cyclic Exposure) |
2000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Adhesion by pull of method) |
2000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Volume Solid) |
2000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Adhesion by X cut method) |
1500.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Pencil Hardness) |
1500.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Temp resistance @ 160 deg. C) |
5000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Abrasion Resistance by CS 17 wheel, 1 kg load, 1000 cycles,) |
3000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Holiday Test (5V)) |
5000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Salt Spray test For 4200 Hrs) |
126000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Humidity Resistance test for 4200 hrs) |
63000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Immersion Test in DM Water for 4200 hrs) |
10000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (ACCELERATED WEATHERING (Cyclic Exposure test for 4200 hrs)) |
175000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Fingerprint of finish product (ISO 20340, Annex B)) |
5600.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (DFT in single coat) |
1200.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (IMPACT RESISTANCE) |
1500.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Shore D Hardness (ASTM D 2240)) |
1000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Abrasion Resistance (ASTM D 4060) Wheel CS 10, 1000 cycles, 1 Kg Load)) |
2000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Elongation & Break (ASTM D 2370)) |
2000.0 |
|
| Custom specification NTH WR SSPC (Paint 2004) (Tensile Strength (ASTM D 2370)) |
2000.0 |
|
| Custom specification NTH WR SSPC Paint, SSPC: The Society for Protective Coatings (Thermal Shock : (30 cycles of 8 hrs heating to 200 Deg C and rapid cooling in air (23 Deg C). Followed by 1440 hrs Neutral Salt Spray) ASTM B 117) |
117600.0 |
|
| Custom specification NTH WR SSPC Paint, SSPC: The Society for Protective Coatings (Thermal Shock: (30 cycles of 8 hrs heating to 650 Deg C and rapid cooling in air (23 Deg C). Followed by 1440 hrs Neutral Salt Spray) ASTM B 117) |
147600.0 |
|
|
| 2866 |
National Test House (NR), Ghaziabad
| IS/IEC 60898 : PART 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table C-1:A,B and D0 Sequence Tests (Table C-1:A,B and D0 Sequence Tests) |
105000.0 |
|
| Table C-1:C,D1,E1 and E2 Sequence Tests(TPN) (Table C-1:C,D1,E1 and E2 Sequence Tests(TPN)) |
340000.0 |
|
| A Sequence Tests (A Sequence Tests) |
40000.0 |
|
| B Test Sequence (B Test Sequence) |
95000.0 |
|
| C1 Test Sequence (C1 Test Sequence) |
75000.0 |
|
| C2 Test Sequence (C2 Test Sequence) |
55000.0 |
|
| D0 Test Sequence (D0 Test Sequence) |
55000.0 |
|
| D1 Test Sequence (D1 Test Sequence) |
60000.0 |
|
| E1 Test Sequence (E1 Test Sequence) |
75000.0 |
|
| E2 Test Sequence (E2 Test Sequence) |
75000.0 |
|
| A Test (A Test) |
10000.0 |
|
| Tests (C1,C2,D1,E1,E2 tests as per IEC 60898(Part-1).) |
230000.0 |
|
| Tests (C1,C2,D1,E1,E2 tests as per IEC 60898(Part-1).) |
270000.0 |
|
| Tests (C1,C2,D1,E1,E2 tests as per IEC 60898(Part-1).) |
340000.0 |
|
| Tests(SPN) (C2,D1,E1,E2 tests as per IEC 60898(Part-1).) |
205000.0 |
|
| Tests(SP) (C2,E1,E2 tests as per IEC 60898(Part-1).) |
130000.0 |
|
| SP (A1,D0 and D1 sequence tests as per IEC 60898(Part-1).) |
60000.0 |
|
| Tests(SPN/DP upto 63A) (Type Tests) |
400000.0 |
|
| Tests(DP) (C2,E1 and E2 Test Sequence) |
155000.0 |
|
| Tests(DP) (C2 and E1 Test Seqquence.) |
95000.0 |
|
| Tests(SPN) (C2,D1 and E1 Test Sequence.) |
145000.0 |
|
| Tests(SP) (C1,C2,D1 and E1 Test Sequence.) |
180000.0 |
|
| Tests(SPN/DP) (C2,D1,E1 and E2 tests) |
205000.0 |
|
| Test(E1-SP) (Test Sequence E1) |
40000.0 |
|
| Test(E1-DP) (Test Sequence E1) |
50000.0 |
|
| Table:C-2 (Type Tests) |
400000.0 |
|
| Tests (Test Sequence E1:Cl:9.12.11.4.2 and Test Sequence E2:Cl:9.12.11.4.3 as per IEC 60898(Part-1).) |
70000.0 |
|
| Tests (Test Sequence:E1 and E2.) |
80000.0 |
|
| Tests (Test Sequence E1 & E2) |
100000.0 |
|
| Tests (Test Sequence E1 & E2) |
140000.0 |
|
| Tests(FP upto 32A) (Test Sequence C1,C2,D1, E1 and E2) |
305000.0 |
|
| Tests(SP upto 32A) (Test Sequence C1,C2,D1, E1 and E2) |
195000.0 |
|
| Tests(SPN upto 32A) (Test Sequence C2,D1, E1 and E2) |
170000.0 |
|
| Tests(DP uptro 32A) (Test Sequence C2, E1 and E2) |
155000.0 |
|
| Table:C-2 (Type Tests) |
300000.0 |
|
| SP(32A) (E1 Sequence) |
40000.0 |
|
|
| 2867 |
National Test House (SR), Chennai
| ASTM D 2370 - Standard Test Method for Tensile and Elongation Properties |
Standard Test Method for Tensile and Elongation Properties |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile strength and Elongation at break) |
2000.0 |
|
| - (Elongation at break) |
2000.0 |
|
|
| 2868 |
National Test House (ER), Kolkata
| Custom-21-ER-LM - Stud Shear Connector |
Stud Shear Connector |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Tensile Strength) |
3000.0 |
|
| 2 (Yield Stress) |
1000.0 |
|
| 3 (Elongation at Gauge length of 5.65√Area) |
1000.0 |
|
| 4 (Diameter of stud shear connector) |
500.0 |
|
| 5 (Length of Stud shear connector) |
500.0 |
|
| 6 (Carbon) |
1000.0 |
|
| 7 (Sulphur) |
1000.0 |
|
| 8 (Phosphorus) |
1000.0 |
|
| 9 (Manganese) |
1000.0 |
|
| 10 (Silicon) |
1000.0 |
|
|
| 2869 |
National Test House (NER), Guwahati
| IS 16415 (2015) - Composite cement - Specification |
Composite cement - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2870 |
National Test House (ER), Kolkata
| Test of Silver Memento - Test of Silver Memento |
Test of Silver Memento |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Actual weight) |
1000.0 |
|
| 2 (Purity of Silver, percent by weight) |
2000.0 |
|
|
| 2871 |
National Test House (ER), Kolkata
| MOY/SCMI/36 (2001) - SPECIFICATION OF ACCURACY FOR A PRECISION CLINOMETER |
SPECIFICATION OF ACCURACY FOR A PRECISION CLINOMETER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Angle) |
2000.0 |
|
|
| 2872 |
National Test House (WR), Mumbai
| IS 4658:1988/Customer requirements (1988) - Cover Paper/Coated paper/Art paper |
Cover Paper/Coated paper/Art paper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Cl. 3.4 of IS 4658:1988) |
1000.0 |
|
| - (Cl. 13 of IS 1060 (Part-2)) |
2000.0 |
|
| - (Cl. 12.5 of IS 1060 (Part-1)) |
1500.0 |
|
| - (Appendix B of IS 4658:1988) |
2000.0 |
|
| - (Cl. 15 of IS 1060 (Part-1)) |
1500.0 |
|
| - (Appendix C of IS 4658:1988) |
1500.0 |
|
|
| 2873 |
National Test House (WR), Mumbai
| 1848:2007 (Fourth Revision)/Customer requirements - Writing & Printing Papers/70 GSM White Maplitho paper |
Writing & Printing Papers/70 GSM White Maplitho paper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (IS 1060 (Part-1)) |
1000.0 |
|
| Table-1 (IS 1060 (Part-2)) |
2000.0 |
|
| Table-1 (IS 1060 (Part-1)) |
2000.0 |
|
| Customer Requirement (IS 1060 (Part-1)) |
1500.0 |
|
| Customer Requirement (IS 1060 (Part-1)) |
1500.0 |
|
| Table-1 (IS 1060 (Part-1)) |
2000.0 |
|
| Table-1 (IS 1060 (Part-1)) |
2000.0 |
|
| Table-1 (IS 1060 (Part-1)) |
2000.0 |
|
|
| 2874 |
National Test House (WR), Mumbai
| IS 1848 : Part 1 (2018) - Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Substance (Grammage), g/sq.m) |
1000.0 |
|
| 4.6 (Brightness, %) |
2000.0 |
|
| 4.6 (One Minute Cobb) |
1000.0 |
|
| 4.6 (i) (Tensile Index (MD)) |
1000.0 |
|
| 4.6 (i) a (Tensile Index (CD)) |
1000.0 |
|
| 4.6 (Opacity, %) |
2000.0 |
|
| 4.6(ix) (Tear Index (CD)) |
1000.0 |
|
| 4.6 (ix) (Tear index(MD)) |
1000.0 |
|
| 4.6 (Wax Pick) |
1500.0 |
|
| 4.6 (v) b (Double fold (CD)) |
750.0 |
|
| 4.6 (v) a (Double Fold (MD)) |
750.0 |
|
| 4.6 (viii)b (Smoothness Bendsten (Wire Side), ml/min) |
1000.0 |
|
| 4.6 (viii)a (Smoothness Bendsten (Top Side), ml/min) |
1000.0 |
|
| 4.5 (pH (Hot Extract)) |
1000.0 |
|
|
| 2875 |
National Test House (NR), Ghaziabad
| Elastomeric Sheet (2022) - Elastomeric Sheet - Firm's Requirements |
Elastomeric Sheet - Firm's Requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Thickness of Sheet (Avg.), mm) |
1000.0 |
|
| 2.0 (Tensile Strength, MPa) |
2000.0 |
|
| 3.0 (Elongation at Break, %) |
2000.0 |
|
| 4.0 (Hardness, Shore'A') |
2000.0 |
|
| 5.0 (Specific Gravity, g/cc) |
1000.0 |
|
| 6.0 (Solid Content, %) |
2000.0 |
|
|
| 2876 |
National Test House (WR), Mumbai
| IS 4658 (2019) - Specification for coated paper and board (Art And Chromo) (Second Revision) |
Specification for coated paper and board (Art And Chromo) (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Substance (Grammage)) |
1000.0 |
|
| 5.5 (Brightness) |
2000.0 |
|
| 5.5 (Burst Index ) |
2000.0 |
|
| 5.5 (Wax Pick) |
2000.0 |
|
| 5.5 (Gloss) |
1500.0 |
|
| 5.5 (Surface pH) |
1000.0 |
|
|
| 2877 |
National Test House (ER), Kolkata
| ASTM C882 (2005) - Standard Test Method for the bond strength of epoxy-resin-base bonding systems for used with concrete by slant shear |
Standard Test Method for the bond strength of epoxy-resin-base bonding systems for used with concrete by slant shear |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2878 |
National Test House (ER), Kolkata
| ASTM C 881/C 881M – 02 - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASTM-C 881/C 881M – 02 Table 1 (Compressive strength (ASTM C 109)) |
4000.0 |
|
| ASTM-C 881/C 881M – 02 Table 1 (Bond strength(ASTM C 882)) |
4000.0 |
|
| ASTM-C 881/C 881M – 02 Table 1 (Flexure strength) |
4000.0 |
|
| ASTM-C 881/C 881M – 02 Table 1 (Tensile strength) |
4000.0 |
|
| - (Appearance) |
1000.0 |
|
| - (Pot life) |
1000.0 |
|
| - (Density) |
1000.0 |
|
|
| 2879 |
National Test House (NR), Ghaziabad
| IS 737 (2024) - Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision) |
Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Chemical Analysis (Please see Annexure)- NABL) |
6000.0 |
|
| 8.2 (Bend Test) |
1000.0 |
|
| 10 (Dimensions) |
1000.0 |
|
| 8.1 (Tensile Strength) |
1000.0 |
|
| 8.1 (0.2% Proof Stress) |
1000.0 |
|
| 8.1 (% Elongation at 50 mm gauge length) |
500.0 |
|
| 6,Table1 (Chemical Composition (Please see Annexure) - NON NABL) |
2500.0 |
|
| 1 (Thickness of Anodized coating) |
2000.0 |
|
|
| 2880 |
National Test House (ER), Kolkata
| 1708 (1986) - Testing of Small Specimen of Timber |
Testing of Small Specimen of Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
