NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1891

National Test House (NWR), Jaipur

8623-1:(1993) - Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1.3 (Tempreture rise test)	20000.0

1892

National Test House (ER), Kolkata

ASTM B117 SALT SPRAY TEST PAINT LAB (2022) - ASTM B117 SALT SPRAY TEST

ASTM B117 SALT SPRAY TEST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (ASTM B117 SALT SPRAY TEST FOR 96 HOURS)	4800.0

1893

National Test House (NWR), Jaipur

IS 16353 (2015) - Portland Cement Clinker - Specification

Portland Cement Clinker - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	600.0
5 (Ratio of percentage of alumina to that of iron oxide)	600.0
5 (C3S)	600.0
5 (C3A)	600.0
5 (C3S + C2S)	600.0
5 (Total Sulphur content calculated as sulphuric anhydride(SO3))	500.0
5 (Free lime)	600.0
5 (Chloride content)	500.0
5 (Magnesia)	600.0
5 (Alkali content expressed as sodium oxide(Na2O))	1200.0
5 (Total loss on ignition)	600.0
5 (Insoluble residue)	600.0

1894

National Test House (NR), Ghaziabad

CUSTOMER SPEC - NC WHITE GLOSSY SURFACER

NC WHITE GLOSSY SURFACER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Please see the Annexure)	3000.0

1895

National Test House (NR), Ghaziabad

IS 133 (2013) - ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.5.1 Table 1 (TEST RESULTS (Please see the Annexure) AS PER CUSTOMER REQUEST)	4000.0

1896

National Test House (NR), Ghaziabad

NTH/NR/RPPT/PVC Coated Fabric (2024) - PVC Coated Fabric-Both Side Coated

PVC Coated Fabric-Both Side Coated

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7016 Part-I (Weight)	1000.0
IS 7016 Part-I (Thickness)	1000.0
IS 7016 Part-II (Breaking Strength, Warp)	1500.0
IS 7016 Part-II (Breaking Strength, Weft)	1500.0
IS 7016 Part-III (Tear Strength, Warp)	1500.0
IS 7016 Part-III (Tear Strength, Weft)	1500.0
IS 7016 Part-V (Adhesion)	2000.0
IS 7016 Part-VII (Water Proofness @220 PSI)	2000.0

1897

National Test House (SR), Chennai

IS 12089 (1987) - Specification for Granulated Slag for the Manufacture of Portland Slag Cement

Specification for Granulated Slag for the Manufacture of Portland Slag Cement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0.3 (Moisture)	1000.0
3.2 (Manganese oxide)	1000.0
3.2 (Magnesium oxide (MgO))	1000.0
3.2 (Sulphide sulphur)	1000.0
3.3 ([CaO + MgO + 1/3 Al2O3] / [SiO2 + 2/3 Al2O3])	6000.0
3.3 ([CaO + MgO + Al2O3] / SiO2)	6000.0
3.3 ([CaO + CaS + 1/2 MgO + Al2O3] / [SiO2 + MnO])	6000.0
3.4 (Insoluble residue)	1000.0

1898

National Test House (SR), Chennai

Custom/SR/Chemical/Water (2023) - Custom Standard from CPWD-Karaikal for STP/WTP Treated Water

Custom Standard from CPWD-Karaikal for STP/WTP Treated Water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (pH)	1000.0
2. (Bio-chemical oxygen demand (BOD))	3000.0
3. (Total suspended solids)	1000.0
4. (Chemical oxygen demand (COD))	2000.0
5. (Nitrogen)	1000.0
6. (Phosphorous)	1000.0
7. (Fecal coliform)	1000.0
8. (Oil & grease)	1000.0
9. (Total dissolved soilds (TDS))	1000.0
10 (Coliform)	1000.0

1899

National Test House (SR), Chennai

Custom/SR/Chemical/Phosphating Chemical (2023) - Custom Standard from Ordinance Factory for Phosphating Solution Hot Dip Type

Custom Standard from Ordinance Factory for Phosphating Solution Hot Dip Type

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Appearance)	1000.0
2. (Specific gravity)	1000.0
3. (pH of 10% solution)	1000.0
4. (Free acidity as H3PO4)	1000.0
5. (Manganese compound as Mn)	1000.0

1900

National Test House (WR), Mumbai

IS 15337 : 2003 (2003) - COAL TAR BASED ANTICORROSION TAPE FOR PROTECTION OF UNDERGROUND MILD STEEL PIPELINES - SPECIFICATION

COAL TAR BASED ANTICORROSION TAPE FOR PROTECTION OF UNDERGROUND MILD STEEL PIPELINES - SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table No. 4 (Solubility of coal tar based tape in petrol (As per Annexure C of IS 15337))	1500.0

1901

National Test House (WR), Mumbai

Customized Specification for ASPHALTOSEAL (Mastic Pad for Bridge Deck) - Customized Specification for ASPHALTOSEAL (Mastic Pad for Bridge Deck)

Customized Specification for ASPHALTOSEAL (Mastic Pad for Bridge Deck)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness (mm.))	1000.0
- (Weight(Kg./sq.m))	1000.0
- (Softening Point(Compound Property) Deg. C)	1500.0
- (Penetration @25Deg.C ,100g,5 seconds (Compound Property)-dmm)	1500.0
- (Tensile Strength (Longitudinal)-N/5cm.)	1000.0
- (Tensile Strength(Transverse)-N/5cm.)	1000.0
- (Elongation(Longitudinal)-%)	1000.0
- (Elongation(Transverse)-%)	1000.0
- (Tear Resistance(Longitudinal)-N)	2000.0
- (Tear Resistance(Transverse)-N)	2000.0

1902

National Test House (SR), Chennai

CUS/SR/MECH-46 (2024) - Beater

Beater

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Length, mm)	1000.0
2.0 (Weight, gm)	500.0

1903

National Test House (SR), Chennai

CUS/SR/MECH-45 (2024) - Cleaning Aid

Cleaning Aid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Length, mm)	1000.0
2.0 (Weight, gm)	500.0

1904

National Test House (Satellite Centre), Varanasi

Customized Specification for ILC of RPPT Lab - Paper/Rubber/Plastics/Textiles

Paper/Rubber/Plastics/Textiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (ILC of Paper/Rubber/Plastics/Textiles)	-

1905

National Test House (ER), Kolkata

IS 1891 (Part 2) (1993 (reaffirmed 2008)) - Conveyor & Elevetor Textile Belting Part 2 (Heat Resistant Belt)

Conveyor & Elevetor Textile Belting Part 2 (Heat Resistant Belt)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1906

National Test House (ER), Kolkata

IS 16415 (2015) - Composite cement - Specification

Composite cement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Test for Consistency)	500.0
Table 3,i (Fineness)	1000.0
Table 3,ii,a (Soundness-by Le-chatelier method)	500.0
Table 3,ii,b (Soundness -by Autoclave method)	500.0
Table 3,iii,a (Setting Time-Initial)	250.0
Table 3,iii,b (Setting Time-Final)	250.0
Table-3 (Compressive strength - 24 h (±) 30 min)	1000.0
Table-3,iv,b (Compressive strength-168(±)2 h)	1000.0
Table-3,iv,c (Compressive strength-672(±)4 h)	1000.0
Table-3,v (Drying shrinkage)	1000.0
6.1 (Alkali Content)	1200.0
6.1 (Chloride content)	1200.0
6.1 (Loss on ignition)	1200.0
6.1 (Sulphide sulphur (S))	1200.0
6.1 (Total Sulphur content calculated as sulphuric anhydride(SO3))	1200.0
6.1 (Magnesia)	1200.0
6.1 (Insoluble residue)	1200.0
Table 2,iii (Total Sulphur content as SO3)	1200.0

1907

National Test House (WR), Mumbai

Customized Specification for ILC of RPPT Lab - Paper/Rubber/Plastics/Textiles

Paper/Rubber/Plastics/Textiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (ILC of Paper/Rubber/Plastics/Textiles)	-

1908

National Test House (NR), Ghaziabad

CUSTOM SPEC-SILICA SAND - CUSTOM SPEC FOR SILICA SAND

CUSTOM SPEC FOR SILICA SAND

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Silicon Di Oxide % by mass)	2000.0
1 (IRON OXIDE ,% BY MASS)	2000.0
1 (ALUMINIUM DI OXIDE, % BY MASS)	2000.0
1 (TITANIUM DI OXIDE ,% BY MASS)	2000.0

1909

National Test House (SR), Chennai

IS 3203 (1982) - TESTING LOCAL THICKNESS OF ELECTROPLATED COATINGS

TESTING LOCAL THICKNESS OF ELECTROPLATED COATINGS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.0 (Coating Thickness by Microscopic method)	2000.0
4.0 (Coating Thickness by Magnetic Instrument)	2000.0

1910

National Test House (SR), Chennai

Custom/SR/Chemical/MISC (2023) - Custom Standard for Miscellaneous Chemical Samples

Custom Standard for Miscellaneous Chemical Samples

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Urea (as N))	2000.0
2. (pH)	1200.0
3. (Biuret)	1000.0
4. (Turbidity)	1000.0
5. (Alkalinity (as NH3))	1000.0
6. (Ash content)	2000.0
7. (Iron)	1000.0
8. (Chloride)	1000.0
9. (Colour)	1000.0
10. (Moisture)	1000.0
11. (Sulphur (as S))	1000.0
12. (Total phosphorous (as P2O5))	1000.0
13. (Chloride content)	1000.0
Custom (Total Heterotropic Plate Count; Test method: On the lines of IS 5402 : 2012.)	1000.0
Custom (Softening Point)	1200.0
Custom (Thickness)	1000.0
Custom (Penetration at 25ºC, 100g, 5 sec, dmm)	1500.0
Custom (Filler)	2000.0
Custom (Tape Width)	1000.0
Custom (Tape Weight)	1000.0
Custom (Test Results in Annexure)	11500.0
Custom (pH (using digital pH meter))	1200.0
Custom (Flash Point Testing as per IS 101 Part 1 Sec 6)	1200.0
24 (Silica (as SiO2))	1200.0
25 (Aluminium oxide (as Al2O3))	1200.0
26 (Calcium oxide (as CaO))	1200.0
27 (Magnesium oxide (as MgO))	1200.0
28 (Sodium oxide (as Na2O))	1200.0
29 (Potassium oxide (as K2O))	1200.0
30 (Iron oxide (as Fe2O3))	1200.0
Custom (Test Results)	9000.0
Custom (Solubility in hydrochloric acid)	1200.0
Custom (Silica content)	1200.0
Custom (Flowability (after 12hr drying at 100 deg Celcius))	1200.0
Custom (Fine material (passing through Sieve no.80))	1200.0

1911

National Test House (NWR), Jaipur

IS 15965: 2012 - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Mass of AZ Coating)	2000.0
8.3 of IS 15961 (Yield strength test, N/mm2)	3000.0
0 (Chemical composition, % by mass)	2500.0
11 (Pitch of Corrugation, mm)	1000.0
11 (Depth of Corrugation, mm)	1000.0
6 (Tensile strength)	2000.0
6 (Elongation)	1000.0
5.1 (Base Metal Thickness)	500.0
0 (Total coated thickness(TCT), mm)	1000.0
1 (Thickness of AZ Coating)	2000.0
6 (Yield stress)	1000.0
5.1 (Carbon (As per Cl. 5.1 of IS 15965 referring to IS 15961 ,Cl.7 again referring to IS 513))	500.0
5.1 (Sulphur (As per Cl. 5.1 of IS 15965 referring to IS 15961 ,Cl.7 again referring to IS 513))	500.0
5.1 (Phosphorus (As per Cl. 5.1 of IS 15965 referring to IS 15961 ,Cl.7 again referring to IS 513))	500.0
5.1 (Manganese (As per Cl. 5.1 of IS 15965 referring to IS 15961 ,Cl.7 again referring to IS 513))	500.0
0 (Composition of AZ Coating Material)	3000.0
1 (Thickness of AZ Coating)	2000.0
1.1 (Exterior coating on top surface)	1000.0
1.1 (Coating on back surface)	1000.0

1912

National Test House (WR), Mumbai

ISO 4624 - Pull Of Adhesion Test

Pull Of Adhesion Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Pull Of Adhesion Test)	5000.0

1913

National Test House (SR), Chennai

CSD-TDS Samples (2023-12) - CSD TDS ALL Index

CSD TDS ALL Index

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimensions)	1000.0
2 (Weight)	1000.0
3 (Colour (visual))	1000.0
4 (Design (visual as per TDS))	1000.0
5 (Composition/Active Ingredients (visual))	1000.0
6 (Raw material/Fillers (visual))	1000.0
7 (Composition/Active Ingredients (Visual/Standard method))	2000.0
8 (Raw material/Fillers (Visual/Standard method))	2000.0
9 (Parts and their specification (Visual Annexure-1))	1000.0
10 (Identification Marks/Marking (visual))	1000.0
11 (item as SECONDS (visual))	1000.0
12 (Finish and Workmanship (visual))	1000.0
13 (Mesh GSM)	1000.0
14 (Lace Strength)	2000.0
15 (Lining GSM)	1000.0
16 (Synthetic GSM)	1000.0
17 (item as REJECT (visual))	1000.0
18 (Capacity with Tolerance (ID))	1000.0
19 (Capacity in volume, Ltrs.)	1000.0
20 (Luggage Type(visual))	1000.0
21 (Fabric (Polyester))	2000.0
22 (Wheels (visual))	1000.0
23 (Locks (FCL) (visual))	1000.0
24 (Interior - Polyester Lining)	2000.0
25 (Interior packing Strap (visual))	1000.0
26 (Interior- One Net pad pocket (visual))	1000.0
27 (Puller (visual))	1000.0
28 (Trolley(visual))	1000.0
29 (Handle (visual))	1000.0
30 (Pocket (visual))	1000.0
31 (Visual Inspection)	1000.0
32 (Polyester Fabric (material))	2000.0
33 (Combination Lock (visual))	1000.0
34 (Trolley system (visual))	1000.0
35 (Expandable features (visual))	1000.0
36 (Front zipper pocket(visual))	1000.0
37 (Wheeling system 360deg (visual))	1000.0
38 (Internal packing pocket (visual))	1000.0
39 (Full side corner guards (visual))	5.0
40 (Nylon Twill fabric (material identification))	2000.0
41 (Three compartment and Padded Handle (visual))	1000.0
42 (Two Water Bottle Holder (visual))	1000.0
43 (Multilevel organiser and coin pouch (visual))	1000.0
44 (Front and Secret pocket (visual))	1000.0
45 (Interior Skybag Logo Printed (visual))	1000.0
46 (Interior One main compartment with top, bottom and side opening (visual))	1000.0
47 (Interior Side mesh pocket (visual))	1000.0
48 (Interior Top pocket (visual))	1000.0
49 (Raincover (visual))	1000.0
50 (600D Polyester with EVA lamination on Front)	4000.0
51 (Steel square trolley with push button (visual))	5.0
52 (1U shape pocket (visual))	1000.0
53 (EVA Laminated on back (Material identification))	2000.0
54 (Non Padded Handle (visual))	1000.0
55 (Shoulder Carrying Strap in Webbing (visual))	1000.0
56 (170D Lining inside with Safari Logo (visual))	1000.0
57 (Composition/Active Ingredients GM Chopper (Standard method))	12000.0
58 (Packing type & Specification (visual))	1000.0
59 (Colour Fastness to Light)	5000.0
60 (Material 100% Cotton)	2000.0
61 (Colour fastness to Rubbing (Dry and Wet))	4000.0
62 (Colour Fastness to Washing, change in colour)	2000.0

1914

National Test House (ER), Kolkata

IRST-12-2009 (2009) - Indian Railway Standard Specification for Flat Bottom Rails

Indian Railway Standard Specification for Flat Bottom Rails

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
18.3 (Macro-Structure Test)	2000.0

1915

National Test House (SR), Chennai

NTH/WI/MC 12 (2019) - Dimension calibration

Dimension calibration

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimension calibration)	2000.0

1916

National Test House (ER), Kolkata

IS 7310 : Part 1 (2019) - Qualification Testing of Welders-Fusion Welding Part 1 Steels (First Revision)

Qualification Testing of Welders-Fusion Welding Part 1 Steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1a) (Magnetic Particle Testing)	1000.0
6.4 (Ultrasonic Testing)	1000.0
6.4 (Radiographic Testing on Plate)	1000.0
6.4 (Visual Testing)	1000.0
6.4 (Macroscopic Examination)	1000.0
6.4 (Bend Test)	1000.0
6.4 (Fracture Test)	3000.0
6.4 (Notched Tensile Test)	3000.0
6.4 (Radiographic Testing on Pipe)	3000.0

1917

National Test House (ER), Kolkata

CUSTOM-32-ER-MCALI - Calibration of Mixer Machine

Calibration of Mixer Machine

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Revolution)	5500.0

1918

National Test House (NR), Ghaziabad

NTH/NR/RPPT/2023/Sealant Component-B/01 (2023) - Sealant Component-B

Sealant Component-B

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 792 (Relative Density)	2000.0
ASTM D 2240 (Hardness, Shore D)	1000.0
ASTM D 1002 (Lap Shear Strength)	3000.0
ASTM D 695 (Compression Strength)	3000.0
ASTM D 638 (Tensile Strength)	3000.0
Firm's Requirement (Full Cure, Maximum)	1000.0
NCD 1410 (Critical Oxygen Index)	5000.0
NCD 1411 (Smoke Index)	10000.0
On the lines of BS 476 Part-7 (Fire Test)	8000.0

1919

National Test House (NR), Ghaziabad

NTH/NR/RPPT/2023/Filler Component-A/01 (2023) - Filler Component-A

Filler Component-A

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 1084 (Viscosity of the Mixture)	2000.0
Firm's Requirement (Full Cure, Maximum)	1000.0
Firm's Requirement (Expansion, Minimum)	3000.0
Firm's Requirement (Critical Oxygen Index (After curing of the compound))	5000.0
Firm's Requirement (Smoke Index (After curing of the compound))	10000.0
On the lines of BS 476 Part-7 (Fire Test)	8000.0

1920

National Test House (WR), Mumbai

IS 6746 (1994 RA 2020) - UNSATURATED POLYESTER RESIN SYSTEM

UNSATURATED POLYESTER RESIN SYSTEM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (ii) table 1 (Acid Value mgKOH/gm)	1200.0
4.1 (iii) table 1 (Volatile Content,% by mass)	1200.0
4.1 (iv) table 1 (Gel time at 25 Deg.C)	1500.0
4.2 (ii) (Relative Density at 27 deg C)	1200.0
1 (Appearence)	1200.0
Table 3 (Clause 4.3) (Tensile Strength)	2000.0
Table 3 (Clause 4.3) (Elongation at break)	2000.0