NTH - Management Information System

Search by Standard No.

Reset

4078 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1951

National Test House (NWR), Jaipur

IS 6745 (1972) - Mass of Zinc Coating (IS 6745)

Mass of Zinc Coating (IS 6745)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Mass of Zinc Coating,(IS 6745:1972))	2000.0

1952

National Test House (ER), Kolkata

IS 7933 (1975) - Specification for flexible polyurethane foam for domestic mattresses

Specification for flexible polyurethane foam for domestic mattresses

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.8 (Density)	1000.0

1953

National Test House (ER), Kolkata

IS 101 ( Part 3/Set 2 ) (:1989 (RA 2019)) - METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHESAND RELATED PRODUCTS (PART 3: TESTS ON PAINT FILM FORMATION) (Section 2: Film Thickness)

METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHESAND RELATED PRODUCTS (PART 3: TESTS ON PAINT FILM FORMATION) (Section 2: Film Thickness)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Measurement of dry film thickness on magnetic metallic substrate by magnetic flux principle)	2000.0

1954

National Test House (ER), Kolkata

BIS IS 2932:2013 RA 2018 (2013) - Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing - Specification :for Domestic and Decorative Applications

Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing - Specification :for Domestic and Decorative Applications

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 Composition (Composition 6.1.1 Rosin and Resin derivative test IS 101 (Part 9/Sec 2)))	100.0
6.1.2 (Total Non-Volatile Content( matter including pigments, extenders and vehicles) IS 101 (Part8/Sec 2))	500.0
6.2 (Condition in Container)	100.0
6.3 (Freedom from Coarse Particles IS 101 (Part l/Sec 2))	100.0
6.4 (Skin Formation IS 101(Part 1/Sec 2).)	100.0
6.5 (Thinning Properties)	100.0
6.6 (Application Properties)	100.0
6.7 (Durability 6.7.1 Registered Sample NORMAL OUTDOOR EXPOSURE TEST ANNEX C at an angle of 45° facing south. Commence the exposure not earlier than the third week of January and not later than the first week of April. (Clauses 6.7.1 .1, 6.7.1.2, 6.7.2.2 and 8.1.1.1))	10000.0
6.7.1.2 (6.7 Durability 6.7.1.2 sample for registration C-4 Artificial weathering apparatus(Xenon ) for 700 hours)	10000.0
6.7.1.3 (Durability Accelerated weathering apparatus (QUV) for 360 hours 6.7.1.3 Lamp type : UV 313 Test cycle : UV (4 h at 60 ± 3°C) Condensation (4 h at 50 ± 3°C)Irradiance : 0.67 W/m2/nm UVB wavelength : 295 – 325 nm (Approx))	10000.0
6.8 (Lead Restriction IS 101 (Part 8/Sec 5))	500.0
6.9 Table 2 1 a) (Consistency Annexure B)	100.0
6.9 Table 2 1 b) (Viscosity by ford cup No. 4 at 27 ± 2°C IS (Part l/Sec 5) —)	100.0
6.9 Table 2 ii (Mass, in kg/10 litre IS 101 (Part l/Sec 7))	100.0
6.9 Table 2 iii a) (Drying time in hours a) Surface Dry)	100.0
6.9 Table 2 iii b) (Drying Time b) Hard Dry in hours)	100.0
6.9 Table 2 iii C) (Drying Time in hours c)Tack free)	100.0
6.9 Table 2 iv a) (Finish IS 101 (Part 3/Sec 4))	100.0
6.9 Table 2 iv b) (b) Gloss at 60 Deg Angle IS 101(Part 4/Sec 4))	100.0
6.9 Table 2 vi (Colour IS 101 (Part 4/Sec 2))	100.0
6.9 Table 2 vi a) (Flexibility and adhesion: a) Scratch hardness IS 101 (Part 5/Sec 2) cl 2)	100.0
6.9 Table 2 vii b) (b) Bend test (with 6.25 mm in type 1 apparatus) Clause 2 of IS 101 (Part 5/Sec 2))	200.0
6.9 Table 2 viii (Flash point in Deg.C IS 101 (Part l/Sec 6))	200.0
6.9 Table 2 ix a) (Composition a) Volume solids percent IS 101 (Part 8/Sec 6))	200.0
6.9 Table 2 ix b) (Composition b)Phthalic anhydride content non-volatile vehicle, percent by mass, IS 101 (Part 8/Sec 4))	200.0
6.9 Table 2 x (Resistance to acid Annexure E)	200.0
6.9 Table 2 xi) (Resistance to alkali Annexure F)	200.0
6.9 Table 2 xiii (Keeping properties For 12 Months IS 101 (Part 6/Sec 2) Not less than one year from date of manufacturing)	5000.0
6.9 Table 2 xiv (Wet opacity, m2/10 litre As per values given in clause 5 IS 101 (Part 4/Sec 1))	100.0

1955

National Test House (WR), Mumbai

IS 14506 : 1998 (1998) - EPOXY REDOXIDEZINCPHOSPHATE WELDABLEPRIMER,TWOCOMPONENTSPECIFICATION

EPOXY REDOXIDEZINCPHOSPHATE WELDABLEPRIMER,TWOCOMPONENTSPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
EPOXY REDOXIDEZINCPHOSPHATE WELDABLEPRIMER,TWOCOMPONENTSPECIFICATION (Please refer annexure for the test result)	23000.0

1956

National Test House (SR), Chennai

IS 9537 : Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1957

National Test House (ER), Kolkata

CUSTOM - Ferro Alloy

Ferro Alloy

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon)	1000.0
2 (Sulphur)	1000.0
3 (Phosphorus)	1000.0
4 (Silicon)	1000.0
5 (Chromium)	1000.0
6 (Manganese)	1000.0
7 (Aluminium, % by mass)	1200.0

1958

National Test House (NR), Ghaziabad

IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Lead Restriction as metallic lead)	1500.0
4.3 table 1(i) (Drying time a) Hard dry)	1500.0
4.3 table 1(ii) (Consistency)	1000.0
4.3 table 1(iii) (Finish)	500.0
4.3 table 1(iv) (Wet opacity meter square per liter)	500.0
4.3 table 1(v) (Mass, kg/10 Litres,)	1000.0
4.3 table 1(vi) (Colour)	200.0
4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus))	1000.0
4.3 table 1(viii) (Stripping test ( By scratch hardness tester))	1000.0
4.3 table 1(ix) (Flash point deg.C)	1000.0
4.3 table 1(x) (Volatile matter content, percent by mass,)	1000.0
4.3 table 1(xi) (Resistance to humidity under conditions of condensation)	2000.0
4.3 table 1(xii) (Resistance to water)	1000.0
4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v))	1500.0
4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution))	1500.0
4.3 table 1(xv) (Resistance to chlorine (0.05 percent of chlorine (m/v).)	1000.0
4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,)	1500.0
4.3 table 1(xvii) (Keeping properties(12 Months))	5000.0

1959

National Test House (ER), Kolkata

Distilled water/Reagent water for Laboratory use (-) - Distilled water/Reagent water for Laboratory use

Distilled water/Reagent water for Laboratory use

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Electrical Conductivity micro siemens/cm at 25 deg C)	1000.0
2 (PH at 25 Deg C)	1000.0
3 (Sodium in ppm)	1000.0
4 (Chloride ppm)	1000.0

1960

National Test House (SR), Chennai

Custom-RVNL-TI/MI/040 (wef 05/04/2005) (2005) - Special Maintenance Instruction (SMI) to Measure the Severity of Pollution by Brush Wash Method

Special Maintenance Instruction (SMI) to Measure the Severity of Pollution by Brush Wash Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Salt deposit density (in mg/cm2))	2500.0

1961

National Test House (ER), Kolkata

IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Breaking Load of Completed Barbed Wire)	1000.0
12.1 (Tensile Strength of Line Wire)	1000.0
12.3 (Ductility)	1000.0
12.2.1 (Zinc Coating of Line wire)	2000.0
6 (Chemical composition (Carbon))	625.0
5 (Dimension/ Sizes)	1000.0
9 (Freedom from Defects)	500.0
6 (Chemical composition (Manganese))	625.0
6 (Chemical composition (Sulphur))	625.0
6 (Chemical composition (Phosphorus))	625.0
12.2.2 (Zinc Coating of Point wire)	2000.0
12.2.2 (Adhesion of Coating of Point wire)	1000.0
12.2.1 (Adhesion of Coating of Line wire)	1000.0

1962

National Test House (NR), Ghaziabad

TI/SPC/OHE/CAT(Cd-Cu)/0971 - Technical specification for Cadmium Copper for Overhead Electrical Traction

Technical specification for Cadmium Copper for Overhead Electrical Traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Chemical composition, percent by mass)	5000.0
8.3.5 (Electrical Resistance)	5000.0
4.8 (Mass, kg/m)	1000.0
8.3.2 (Measurement of diameter, mm)	2000.0
8.3.4 (Lay length and Lay ratio, mm)	3000.0
8.3.6 (Tensile strength for individual 19 wires)	9500.0
8.3.7 (Wrapping test)	1000.0
9.1.1 (Visual examination)	1000.0
9.1.2 (Diameter of Stranded conductor)	1000.0

1963

National Test House (NWR), Jaipur

IS 3204 (2024) - Specification for limestone for chemical industry (First Revision)

Specification for limestone for chemical industry (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 & 5.2.6 (Magnesium (as MgO))	1000.0
3.2 & 5.2.5 (Calcium (as CaO))	1000.0
3.2 & 5.2.4 (Iron (as Fe2O3))	1000.0
3.2 & 5.2.2 (Loss on ignition)	1000.0
3.2 & 5.2.3 (Silica (as SiO2))	1000.0
3.2 & 5.2.10 (Silica (as SiO2), Alumina(Al2O3) and ferric oxide as (Fe2O3) together)	3000.0

1964

National Test House (WR), Mumbai

IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification

Coarse and fine aggregate for Concrete for concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1000.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
5.3 (IS:2386(Pt.-1)_Flakiness Index)	1500.0
5.3 (Elongation Index)	1500.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0
12 (Organic Impurities)	1000.0
13 (IS 2386 (Part 5)_Soundness (Magnesium Sulphate))	2000.0
13 (Soundness (Sodium Sulphate)-IS 2386 (Part 5))	2000.0

1965

National Test House (WR), Mumbai

Custom specification for general chemical (WR) - Custom specification for general chemical (WR)

Custom specification for general chemical (WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Skin/eye irritation)	2500.0
- (Flammability test (using Cleveland open cup))	2000.0
Custom specification for general chemical (WR) (Please see Annexure)	5000.0

1966

National Test House (ER), Kolkata

CUSTOM/PP ROPE/2023 - CUSTOM/PP ROPE/2023

CUSTOM/PP ROPE/2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dia of Rope)	500.0
2.0 (Weight of Rope)	1000.0
3.0 (Breaking Strength of Individual Rope)	5000.0
4.0 (Size of Crate)	1000.0
5.0 (Size of Mesh Opening)	500.0
6.0 (Structure of Rope)	500.0
7.0 (Construction of Net)	500.0
8.0 (Size of Gabion)	500.0
9.0 (Linear Density of Rope)	1000.0
10.0 (Material of Rope)	5000.0
11 (Length of Lay)	1000.0
12 (Weight of Tar)	1200.0

1967

National Test House (ER), Kolkata

IS 4759 (1996) - Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Mass of Zinc Coating, (g/m2))	2000.0
9.3 (Determination of Uniformity of Galvanizing Coating)	1000.0

1968

National Test House (WR), Mumbai

Custom specification for metal (Chemical) WR - Custom specification for metal (Chemical) WR

Custom specification for metal (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification for metal (Chemical) WR (Please see the annexure)	5000.0

1969

National Test House (ER), Kolkata

RDSO/2009/CG-03 (2016) - Schedule of Technical Requirements for Injection Moulded Polyacetal Protective Tube for ICF Type B.G. Main Line & EMU Trailer Coaches (Tentative).

Schedule of Technical Requirements for Injection Moulded Polyacetal Protective Tube for ICF Type B.G. Main Line & EMU Trailer Coaches (Tentative).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Specific Gravity)	1000.0
5.1 (Tensile Strength)	2000.0
5.1 (Elongation at Break)	1000.0
5.1 (Melt Flow Rate @ 190 deg.C at 2.16 kg load)	2000.0

1970

National Test House (WR), Mumbai

Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement - Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement

Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (CARBON)	1200.0
2 (SULPHUR)	1200.0
3 (PHOSPHOROUS)	1200.0
4 (SULPHUR & PHOSPHOROUS)	1200.0
5 (CARBON EQUIVALENT)	1200.0

1971

National Test House (SR), Chennai

IS 1367 : Part 6 (2018) - Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1972

National Test House (SR), Chennai

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Test)	2000.0
7 (Proof Load)	3000.0
6 (Chemical composition, % by mass)	2500.0
7, Table 6 (Rockwell hardness, HRC)	2000.0

1973

National Test House (NER), Guwahati

IS 13801 (2013) - Chequered Cement Concrete Tiles -

Chequered Cement Concrete Tiles -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.6 (Resistance to wear)	2000.0
12.5 (Wet transverse strength)	2000.0
12.4 (Water Absorption)	1000.0
7 (Dimension: Thickness)	1000.0
7.1,Table 1,Column 3 (Dimension-Breadth(IS 13801:2013))	-
7.1,Table 1,Column 2 (Dimensions -Length)	300.0
10 (General Quality)	100.0
8.3 (Thickness of Wearing Layer)	500.0
12.3 (Straightness)	500.0
12.2 (Perpendicularity)	500.0
12.1 (Flatness)	500.0

1974

National Test House (WR), Mumbai

Custom Specification for Sand (Chemical) WR - Custom Specification for Sand (Chemical) WR

Custom Specification for Sand (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annexure (Please see the Annexure)	5000.0

1975

National Test House (NWR), Jaipur

IEC 60099 - 4 (2014) - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.13 (Seal Leak Test)	10000.0

1976

National Test House (NER), Guwahati

Custom - WATER/ Effluent treatment plant Water/ Sewage water/Filter water/ Potable water/River water

WATER/ Effluent treatment plant Water/ Sewage water/Filter water/ Potable water/River water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Total suspended solids, mg/l)	1200.0
3 (Total Dissolved Solids, mg/l (IS 3025 part 16))	1200.0
4 (Biological Oxygen Demand, mg/l)	3000.0
6 (Total Alkalinity (as CaCO3), mg/l (IS 3025 (part 23)))	1200.0
5 (Chemical Oxygen Demand, mg/l)	2000.0
7 (pH Value)	1200.0
8 (Oil & grease, mg/l)	1200.0
7 (Faecal Coliform)	2000.0

1977

National Test House (NR), Ghaziabad

IS 4020(Parts 1 to 16):1998 RA 2018 - Door shutters-Methods of Tests

Door shutters-Methods of Tests

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2-2.1 (Dimension: Height(mm) (IS 4020 (part 2) : 1998))	250.0
2-2.2 (Dimension:Width (IS 4020 (part 2) : 1998))	250.0
2-2.3 (Diemension:Thickness (IS 4020 (part 2) : 1998))	250.0
10 (Slamming Test (IS 4020 (part 10) : 1998))	1000.0
8 (Shock resistance Test (IS 4020 (part 8) : 1998))	1500.0
7 (Edge Loading Test ( IS 4020 (part 7) : 1998))	1500.0

1978

National Test House (SR), Chennai

900173-Custom RO Salt (2023) - Customer Requirement on RO Salt Sample Analysis

Customer Requirement on RO Salt Sample Analysis

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (a) (Loss on Ignition (at 450 deg C) after 1 hour)	1200.0
1 (b) (Colour (after LoI at 450 deg C for 1 hour))	1200.0
2 (a) (Loss on Ignition (at 450 deg C) after 2 hours)	1200.0
2 (b) (Colour (after LoI at 450 deg C for 2 hours))	1200.0

1979

National Test House (SR), Chennai

Relevant Standards (2023) - Custom Tests Aluminium Composite

Custom Tests Aluminium Composite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Weight (as such))	1000.0
2 (Dimension, Panel Width, mm)	500.0
3 (Dimension Panel Length, mm)	500.0
4 (Panel Thickness, mm)	1000.0
5 (Density at 27degC, g/cc)	1000.0
6 (Tensile Strength, kg/sq.mm)	1000.0
7 (Tensile Yield Strength, kg/sq.mm)	500.0
8 (Elongation, %)	500.0
9 (Flexural Strength, Kg/sq.mm)	2000.0
10 (Compressive Strength, MPa)	2000.0
11 (Water Absorption, %)	1000.0

1980

National Test House (SR), Chennai

DIN EN 12467 (July 2018) - Fibre-Cement Flat Sheets-Product specification and test methods

Fibre-Cement Flat Sheets-Product specification and test methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.2 (Appearance & finish)	2000.0
5.2 (Classification)	2000.0
5.3.2 (Dimension : Nominal length)	1000.0
5.3.2 (Dimension : Nominal Width)	1000.0
5.3.3 (Dimension : Thickness)	1000.0
5.3.5.1 (Shape-Straightness of edges)	1000.0
5.3.5.2 (Shape-Squareness of edges)	1000.0
5.4.2 (Apparent density)	1000.0
5.4.3 (Moisture movement)	3000.0
5.4.4 (Mechanical characteristics-Bending strength(MOR))	4000.0
5.4.4 (Mechanical Characteristics-Modulus of elasticity(MOE))	4000.0
5.4.5 (Water impermeability)	4000.0
5.5.2 (Freeze-thaw)	25000.0
5.5.3 (Heat-rain)	100000.0
5.5.4 (Warm water)	25000.0
5.5.5 (Soak-dry)	25000.0