NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1711

National Test House (NER), Guwahati

15388 (2003) - Silica Fume Specification (Custom requirements)

Silica Fume Specification (Custom requirements)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4, Table 1(i) (Silica SiO2 (IS 1727), percent by mass)	2000.0
4, Table 1(ii) (Moisture Content, percent by mass)	800.0
4, Table 1(iii) (Loss on ignition (IS 1727), percent by mass)	1000.0
4, Table 1(iv) (Alkalies as Na2O, (IS 4032), percent)	1000.0
5, Table 2(ii) (Oversize particle retained on 45 micron IS sieve (IS 1727), percent)	1000.0
5, Table 2(iv) (Compressive Strength at 7 days as per cent of control sample (IS 1727), %)	3000.0
- - (Specific Gravity [IS 2386(Part 3)])	1000.0
- - (Bulk Density [IS 2386 (Part 3)], g/cc)	1000.0

1712

National Test House (WR), Mumbai

IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY

WHITE CEMENT BASED POLYMERIC PUTTY

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (FORM &CONDITION)	100.0
4.3 (Consistency)	100.0
4.4 (Lead Restriction ( as metallic lead))	1000.0
4.5 Table 1(i) (Tensile adhesion strength (avg. of min 3 readings) @14 days, N/mm2,)	2500.0
4.5 Table 1(ii) (Water retentivity, percent)	1000.0
4.5 Table 1(iii) (Initial Setting time-Annex D in minutes)	200.0
4.5 Table 1(iii) (Final Setting time-Annex D in minutes)	200.0
4.5 Table 1(iv) (Polymer content (based on loss on ignition), percent by mass)	1000.0
4.5 Table 1(vi) (Cement content, percent Annex B of IS 5410)	1200.0
4.6 Optional requirement (Compressive strength, 28 days in N/mm2 (IS 4031 (Part 6)))	3000.0
4.5 Table 1(v) (Degree of whiteness, percent)	1200.0

1713

National Test House (WR), Mumbai

Customized Specification for Waste Container(Dust Bin)(Dust Bin) - Customized Specification for Waste Container(Dust Bin)

Customized Specification for Waste Container(Dust Bin)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Material Identification)	2000.0
- (Tensile Strength at Break as per ASTM D 638)	2000.0
- (Elongation at Break as per ASTM D 638)	2000.0
- (Volume capacity(Ltrs))	1000.0
- (Density as per ASTM D 792)	1000.0
- (Ball Drop test @ 1Kg. from 0.3 M height(3times at different locations)on the lines of IS 12701:1996)	2000.0

1714

National Test House (WR), Mumbai

None - Association of American Railboard ( Silica Sand)

Association of American Railboard ( Silica Sand)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Solubility)	1000.0
- (Silica content)	1500.0

1715

National Test House (WR), Mumbai

1865 (1991) - Iron Castings with Spheroidal or Nodular Graphite- Specification

Iron Castings with Spheroidal or Nodular Graphite- Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Tensile Strength as per IS 1608 Part 1 or relevant standard test method)	1000.0
12.1 (0.2 percent proof stress ( Grade Specified in Table 1 of IS 1865) - Test method as per IS 1608 Part-1)	1000.0
12.1 (Percentage of Elongation ( Grade Specified in Table 1 of IS 1865) - Test Method as per IS 1608 Pat-1)	1000.0
12.2 (Impact Test carried out V-Notch Charpy Test as per IS 1757 ( Clause 12.2.1, 12.2.2. and 13.3.1 Table 3 and 4 of IS 1865))	5000.0
13.2 (Brinell Hardness Test as per IS 1500 Part-1 ( Specified in Annexure-A of IS 1865))	2000.0
A-5 (Microstructure as per IS 7754 ( Specification in Annexure A-5 of IS 1865))	3500.0
6 (Visual Examination as per IS 1865, Clause.61. and 6.2 with customer specified drawing)	1000.0
8 (Visual Examination as per IS 1865 Cl.8.1 and 8.2)	1000.0
0 (Dimension Measurement of Cast and Finished Product as per customer specified drawing with tolerances)	1000.0
0 (Visual Examination of Finished Product as per customer specification)	1000.0

1716

National Test House (NR), Ghaziabad

IRC SP 81 (2008) - Tentative Specification for Slurry Seal and Micro surfacing

Tentative Specification for Slurry Seal and Micro surfacing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 3 (Gradation)	2000.0
Table 2 (Water Absorption)	1000.0
Table 2 (Soundness with Sodium Sulphate)	2000.0

1717

National Test House (WR), Mumbai

None - Custom- Non Flammable Adhesive (Gen Chem)

Custom- Non Flammable Adhesive (Gen Chem)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Consistency)	1000.0
- (Coverage)	1000.0
- (Odour)	500.0
- (Wet Strength)	4500.0
- (Shear Strength)	4500.0
- (Fire Resistance)	3000.0
- (Drying Time)	1000.0
- (Colour)	500.0

1718

National Test House (NR), Ghaziabad

IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision)

Hot dip galvanized stay strand - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Breaking Force of Single Wire)	2000.0
7 (Freedom from defect)	1000.0
4 (Sulphur)	500.0
4 (Phosphorus)	500.0
8.1 (Wrapping Test of wire)	1000.0
9.1 (Breaking Force of Strand)	3000.0
9.1 (Elongation of Strand)	1000.0
8.1 (Wire Diameter)	1000.0
9.2 (Mass of Zinc Coating)	2000.0

1719

National Test House (ER), Kolkata

NCD 1435 (-) - NCD 1435 EPOXY RED OXIDE SHOP PRIMER

NCD 1435 EPOXY RED OXIDE SHOP PRIMER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Preliminary Examination IS101 Part 1 /Sce 2 ,1987)	500.0
2 (Relative consistency Efflux time immediately after mixing by ford cup no 4 at 27+/-2 deg C in seconds IS 101 Part 1 /Sce 2 ,1989)	1200.0
3 (Application properties & finish IS 101 Part 1 /Sce 2 ,1987)	1200.0
4 (Drying time, hrs a) Surface Dry IS 101)	500.0
5 (Drying time, hrs a) Hard Dry IS 101)	500.0
6 (Flexibility and adhesion( 7 days drying) IS 101 Part 5 /Sce 2 ,1988)	1500.0
7 (Dry film thickness(DFT) , microns per coat IS 101 Part 3 /Sce 2 ,1989)	1500.0
8 (Flash point (mixed material ) in minutes IS 101 Part 1 /Sce 6 ,1987)	1500.0
9 (Pot life Hrs, AS per APPENDIX A)	1000.0
10 (Percent pigment IS 101 Part 8 /Sce 2 1986)	2500.0
11 (Percent volatile matter ,IS 101-1986 Part 2 /Sce 2)	1500.0
12 (Weight in kg per ten litre IS 101-1986 Part 1 /Sce 7)	1500.0
13 (Resistance to corrosion under condition of condensation for a period of 14 days ( one coat on grit blasted MS panel) after 7 days of curing IS 101 Part 6 /Sce 1 1988)	4000.0
14 (Resistance to sea water under condition of cathodic protection for 6 weeks APPENDIX C)	10000.0

1720

National Test House (WR), Mumbai

BS 204 :2001 (2001) - Classification of Thermoplastic Wood Adhesives for Non-Structural Application

Classification of Thermoplastic Wood Adhesives for Non-Structural Application

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 2, Sl. No. 1 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm.)	4000.0
Table 2, Sl. No. 1 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm.)	4000.0
Table 2, Sl. No. 2 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 3 hr followed by 7 days at Std Atmosphere))	5000.0
Table 2, Sl. No. 2 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 3 hr followed by 7 days at Std Atmosphere))	5000.0
Table 2, Sl. No. 3 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days))	5000.0
Table 2, Sl. No. 3 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days))	5000.0
Table 2, Sl. No. 4 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days followed by 7 days in Std Atmosphere))	5000.0
Table 2, Sl. No. 4 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days followed by 7 days in Std Atmosphere))	5000.0
Table 2, Sl. No. 5 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in boiling water for 3 hr followed by 2 hr in water at 20 +/- 5 Deg C).)	6000.0
Table 2, Sl. No. 5 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in boiling water for 3 hr followed by 2 hr in water at 20 +/- 5 Deg C).)	6000.0

1721

National Test House (WR), Mumbai

IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision)

Hot dip galvanized stay strand - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Freedom from defect)	1000.0
8.1 (Wrapping Test of wire)	1000.0
9.1 (Breaking Force of Strand)	3000.0
9.1 (Elongation of Strand)	1000.0
8.1 (Wire Diameter)	1000.0
9.2 (Mass of Zinc Coating)	2000.0
4 (Sulphur)	500.0
4 (Phosphorus)	500.0

1722

National Test House (NR), Ghaziabad

IS 15058 (2002) - PVC WATER-STOPS AT TRANSVERSE CONTRACTION JOINTS FOR USE IN MASONRY AND CONCRETE DAMS

PVC WATER-STOPS AT TRANSVERSE CONTRACTION JOINTS FOR USE IN MASONRY AND CONCRETE DAMS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dimensions)	1000.0
Table-1 (Tensile Strength)	1000.0
Table-1 (Elongation)	1000.0
Table-1 (Hardness)	1000.0
Table-1 (Water Absorption)	1000.0
Table-1 (Cold Bend Temperature at which sample doesn't crack)	1000.0
Table-1 (Accelerated Extraction Test, Tensile Strength)	1500.0
Table-1 (Accelerated Extraction Test, Elongation)	1500.0
S.No. vii(a) of Table-1 (Weight Increase at 7 days)	1000.0
S.No. vii(b) of Table-1 (Weight decrease at 7 days)	1000.0
S.No. vii(c) of Table-1 (Change in Hardness at 7 days)	1000.0
S.No. vii(d) of Table-1 (Weight increase at 28 days)	1000.0
S.No. vii(e) of Table-1 (Weight decrease at 28 days)	1000.0
S.No. vii(f) of Table-1 (Dimension Change)	2000.0

1723

National Test House (SR), Chennai

CUS/SR/CH/CPWD-Chennai - Custom standard for Sulphates in Ground Water and Soil

Custom standard for Sulphates in Ground Water and Soil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test results (Borehole 1))	13000.0
2 (Test results (Borehole 2))	13000.0

1724

National Test House (ER), Kolkata

IS 1726 (1991) - Cast Iron Man Hole Covers and Frames

Cast Iron Man Hole Covers and Frames

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Dimension of Man Hole covers)	1000.0
7 (Dimension of Frames)	1000.0
10 (Load Test)	5000.0

1725

National Test House (ER), Kolkata

P-6 B269-000-02-42-PCS-0001 Rev. 2 (-) - P-6 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

P-6 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	2500.0
2 (Dry Film Thickness per coat, microns)	1000.0
3 (Theoretical coverage m2/litre/coat)	1500.0
4 (weight per litre in Kg/litre)	1500.0
5 (Touch Dry @ 30°C)	250.0
6 (Hard Dry Time in hrs @ 30°C)	250.0
7 (Overcoating Intervals Hours)	1000.0
8 (Pot Life for two components paint @ 30°C Hrs)	1500.0
9 (Adhesion ASTM D 4541 MPa)	5000.0
10 (Temperature Resistance at 80 Deg .C Method A- ASTM D 2485)	2500.0

1726

National Test House (ER), Kolkata

Customized Specification for Paint Coatings NTH ER 2024 (-) - Customized Specification for Paint Coatings NTH ER 2024

Customized Specification for Paint Coatings NTH ER 2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (PULL OF ADHESION ,MPa ASTM D4541)	5000.0
2 (HUMIDITY RESISTANCE FOR 3000 hrs)	90000.0
3 (HUMIDITY RESISTANCE FOR 1000 hrs ASTM D4585)	50000.0
4 (SALT SPRAY TEST FOR 2000 hrs ASTM B 117)	100000.0
5 (UV RESISTANCE FOR 1000 hrs (ASTM G 154)	50000.0
6 (SALT SPRAY TEST FOR 5000 hrs ASTM B 117)	250000.0
7 (TENSILE STRENGTH, MPa ASTM D 638)	2000.0
8 (ELONGATION % ASTM D 638)	1000.0
9 (WATER IMMERSION TEST for 14 days)	5000.0
10 (UV RESISTANCE FOR 500 hrs (ASTM G 154)	25000.0
11 (SALT SPRAY TEST FOR 2500 hrs ASTM B 117)	125000.0
12 (SALT SPRAY TEST FOR 1000 hrs ASTM B 117)	50000.0
13 (Dry film Thickness(DFT),in microns)	1200.0
15 (Scratch hardness (at the load of 1000gm) IS: 101 (part 5 / Sec 1) 1988 (Reaffirmed 2019))	1200.0
16 (Adhesion of film ASTM 3359 (Circular Blade cross cut) /IS:101.5.2.1988)	2000.0
17 (Finish IS:101 (Part 3/ sec 4) 1987 (Reaffirmed 2019))	1000.0
18 (Accelerated Weathering QUV test for 1000 hours (ASTM D 4587) (Gloss Loss, Colour Change))	50000.0
19 (Resistance to petrol benzol mixture (To pass 500g scratch hardness after the exposure) jSS-8010-82:2012, Appendix - D)	2000.0
20 (Resistance to warm water at 45±3° C for 4 hours jSS-8010-82:2012,Appx E)	3500.0
21 (Accelerated storage stability test at 60° C for 96 h jSS-8010-82:2012, Appendix - C)	3500.0
22 (RESISTANCE TO SALT WATER JSS-8010-82:2012, Appendix - F)	8000.0
23 (Resistance to LUBRICATING OIL jSS-8010-82:2012, Appendix - A)	5000.0
24 (Resistance to heat at 150° C JSS-8010-82:2012, Appendix- B)	3500.0
25 (Humidity test at 95% RH & 30ºC TO 60ºC for 72 hours IS:101 part .6.1.1988.)	3000.0
26 (QUV test for 822 hours Test Condition:24 hours Cycle of 8 hrs UV to 60ºC and 4 hrs condensations to 40ºC ASTM G154, ASTM D 4587)	42000.0
27 (Resistance to low Temperature at -40 +/- 0.1ºC for 08 hrs)	10000.0
28 (Protection against corrosion for 48 Hours IS 101)	2000.0
29 (Resistance to High Temperature at 120 ± 0.1°C for 8 hours.)	1000.0
30 (Chemical Resistance In detergent)	2500.0
31 (Chemical Resistance (Petroleum, Diesel, Acetone solvent) ASTM D 2792)	5000.0
32 (Salt Spray Test ASTM B 117 for48 hours 101B/ IS 101.6.3.1990)	1200.0
33 (Outdoor Durability Test 25 days JSS-8010-82 2012.Annex G)	20000.0
34 (Impact Resistance test ASTM 2794)	1500.0
35 (Adhesion test, MPa (ASTM D4541))	3500.0
36 (Abrasion Resistance (ASTM D 4060) 1000g load/CS 17/1000 Cycle)	4000.0
37 (Hardness)	3000.0
38 (Flexibility ASTM D 522))	1500.0
39 (Dry heat Resistance)	3500.0
40 (Storage Stability)	2500.0
41 (Keeping property)	10000.0
42 (Gloss Value)	1200.0
43 (Dry Film Thickness (DFT))	1200.0
45 (Flash Point in Deg c (IS 101 part 1 sec 6))	1200.0
46 (Salt Spray test for 480 hours ASTM B 117/ISO 9227)	24000.0
47 (Salt spray test for 1440 hours ASTM B117/ISO 9227)	72000.0
48 (Corrosion/Salt Fog Test ASTM B117 14 DAYS)	16800.0
49 (color)	1200.0
50 (Appearance)	1200.0
51 (Accelerated Weathering Test (QUV) for 2000hrs)	100000.0
73 (Water Vapour Transmission (ASTM E 96))	5000.0
18 (Accelerated Weathering QUV test for 1000 hours (ASTM D 4587) (Gloss Loss, Colour Change))	50000.0
94 (Volatile Organic Compound)	3000.0
95 (Toxic metals such as lead, cadmium, chromium (VI) and their compounds)	3600.0

1727

National Test House (ER), Kolkata

IS 16098(Part 2) - STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE

STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Outer Diameter(mm.))	1000.0
- (Inner Diameter(mm.))	1000.0
- (Wall Thickness(mm.))	1000.0
- (Impact Test)	2000.0
- (Resistance to heating oven test)	2000.0
- (Ring Flexibility)	2000.0
Firm's request (Tensile Strength)	2000.0
Firm's request (Elongation)	1000.0
Firm's request (Hardness (Shore D))	1000.0

1728

National Test House (ER), Kolkata

IS 16098 Part 2 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Joints-Elastomeric Sealing Rings)	1000.0
8.2.2 (Impact Strength of Injection Moulded and Fabricated Fittings)	1000.0
8.2.1 (Mechnical of Fittings-General)	2000.0
8.1.2 (Mechnical of pipes-Ring Flexibility)	2000.0
8.1.1 (Mechnical of pipes-General)	2000.0
7.1 (Appearance and Color )	1000.0
6.3.5 (Wall Thickness)	1000.0
6.3.4 (Dia and joining dimensions of sockets and spigots)	1000.0
6.3.2 (Length)	1000.0
6.3.1 (Diameter )	1000.0
5.1 (Base Density)	1000.0
7.2 (Resistance to Heating (Oven Test))	2000.0
5.1 (Melt Flow Rate (Base Material))	2000.0
1 (Thermal Stability(OIT))	2000.0
Firm's request (Tensile Strength)	2000.0
Firm's request (Elongation)	1000.0
Firm's request (Hardness (Shore D))	1000.0
Firm's request (Density)	1000.0
Firm's request (Melting Point)	1000.0

1729

National Test House (ER), Kolkata

Custom - Powder of Quartzite lumps

Powder of Quartzite lumps

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Fe2O3)	1200.0
2 (SiO2)	2000.0

1730

National Test House (NER), Guwahati

IS 2333 (1992) - Plaster of paris for ceramic industry - Specification (Second Revision)

Plaster of paris for ceramic industry - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Calcium Sulphate ( As CaSO4))	1200.0
4.2 (Matter Insoluble in HCL)	1000.0
4.3 (Carbonates ( As CaCO3))	1200.0
4.2 (Free moisture)	500.0
4.3 (Compound water)	1200.0

1731

National Test House (ER), Kolkata

NTH ER Paint 2024 (0) - NTH ER Paint 2024

NTH ER Paint 2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Lead (as pb) by AAS (ASTM D 3335))	700.0
2 (Cadmium (as Cd) by AAS (ASTM D 3335))	700.0
3 (Chromium as Cr By AAS(ASTM D 3718))	700.0
4 (Mercury as Hg) by AAS (ASTM D 3624))	700.0
1 (Appearance)	1200.0

1732

National Test House (NR), Ghaziabad

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4 (Bond Strength (Pull out test))	15000.0

1733

National Test House (ER), Kolkata

15607 - BIODIESEL (B-100) — FATTY ACID METHYL ESTERS (FAME) — SPECIFICATION

BIODIESEL (B-100) — FATTY ACID METHYL ESTERS (FAME) — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.4 (Density at 15 °C, kg/m3)	1200.0
4.4 (Kinematic viscosity at 40 °C, cSt)	1200.0
4.4 (Copper strip corrosion, 3 h at 50 °C, Max)	1200.0
4.4 (Acid value, mg KOH/g, Max)	1200.0

1734

National Test House (WR), Mumbai

Customized Specification for APP Modified Polyester Reinforced Bitumen Membrane - APP Modified Polyester Reinforced Bitumen Membrane

APP Modified Polyester Reinforced Bitumen Membrane

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Roll Size)	500.0
- (Thickness as per ASTM D 5147)	1000.0
- (Roll Weight)	500.0
- (Softening Point as per ASTM D 36)	1500.0
- (Tensile Strength in Longitudinal Direction as per ASTM D 5147, N/5cm)	1000.0
- (Tensile Strength in Transverse Direction as per ASTM D 5147, N/5cm)	1000.0
- (Elongation at break in Transverse Direction as per ASTM D 5147, %)	1000.0
- (Elongation at break in Longitudinal Direction as per ASTM D 5147,%)	1000.0
- (Tear Strength in Longitudinal Direction as per ASTM D 5147, N)	2000.0
- (Tear Strength in Transverse Direction as per ASTM D 5147, N)	2000.0
- (Water Absorption as per ASTM D 5147)	2000.0
- (Compound Stability as per ASTM D 5147)	2000.0
- (Low Temperature Flexibility as per ASTM D 5147)	2000.0
- (Resistance to Ageing for 200hrs, UV as per ASTM G 154)	12000.0
- (Ageing in Weather-O-Meter for 200hrs as per ASTM G 155)	12000.0
- (Dimensional Stability in both directions as per ASTM D 5147)	2000.0
- (Penetration in dm at 25 deg. as per ASTM D 5)	1500.0

1735

National Test House (ER), Kolkata

IS 3975 (1999) - Low carbon galvanized steel wires, formed wires and tapes for armouring of cables

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Sulphur)	500.0
6.2 (Phosphorus)	500.0
7 (Dimension)	1000.0
8.1 (Tensile Strength)	2000.0
8.2 (Torsion Test for round wire only)	1000.0
8.3 (Wrapping Test)	1000.0
8.4 (Resistance Test for round and formed wire)	2000.0
9.1 (Mass of Zinc Coating)	2000.0
9.2 (Uniformity of Coating)	1000.0
9.3 (Adhesion Test)	1000.0
11 (Freedom from defect)	1000.0
8.1 (% Elongation)	1000.0

1736

National Test House (ER), Kolkata

11087. (1986) - Specification For Paper For Magnetic Ink Character Recognition Cheque Printing.

Specification For Paper For Magnetic Ink Character Recognition Cheque Printing.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Description)	1000.0
3.2 (Absence of Magnetizable Particles.)	1000.0
3.3 (Substance)	1000.0
3.4 (Thickness)	1000.0
3.5 (Sizes)	1000.0
3.6 (Smoothness)	1000.0
3.6 (Porosity)	1000.0
3.6 (Opacity)	2000.0
3.6 (Wax pick)	2000.0
3.6 (Tearing Strength)	2000.0
3.6 (Stiffness)	1000.0
3.9 (Chemical Sensitize Test)	10000.0
Firm's request (UV Sensitization Test (24 hrs))	1200.0

1737

National Test House (NWR), Jaipur

IS 9815 (1994) - SERVO-MOTOR OPERATED AUTOMATIC LINE VOLTAGE CORRECTORS & CUSTOMER REQUIREMENTS

SERVO-MOTOR OPERATED AUTOMATIC LINE VOLTAGE CORRECTORS & CUSTOMER REQUIREMENTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.1 a (Physical Examination)	2000.0
11.1 b (Insulation Resistance Test)	5000.0
11.1 c (High Voltage Test)	5000.0
11.1 d (Provision for Earthing)	5000.0
11.1 f (Output Voltage)	5000.0
11.1 h (Measurement of no-load losses)	6000.0
11.1 k (Load loss test and efficiency)	7000.0

1738

National Test House (NWR), Jaipur

IS : 9815( Part 1) :1994,Reaffirmed in : 2019 (1994 : Reaffirmed in : 2019) - Servo-Motor Operated Automatic Line Voltage Correctors

Servo-Motor Operated Automatic Line Voltage Correctors

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1739

National Test House (NR), Ghaziabad

1538 (1993) - Cast Iron Fittings for Pressure pipes for Water, Gas & Sewage

Cast Iron Fittings for Pressure pipes for Water, Gas & Sewage

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Chemical Composition, % by Mass)	3000.0
6.1 (Brinell Hardness test)	2000.0
9.1 (Dimension test)	2000.0

1740

National Test House (ER), Kolkata

CUSTOMER SPECIFICATION PAINT LAB (0) - CUSTOMER SPECIFICATION PAINT LAB

CUSTOMER SPECIFICATION PAINT LAB

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Salt spray test 24 hours, after 48 hours, after 72 hours ,after 96 hours &after 120 hours I)Delta E Value (before Exposure) II)Delta E Value (after Exposure) III)Gloss Value (before Exposure) iv) Gloss Value (after Exposure))	8000.0
2 (Rusting/corrosion test as per ASTM B-117 Test results after 24, 48, 72, 96 and 120 hours exposure of salt spray for rusting/corrosion evaluation)	6000.0
3 (Salt Spray Test 96 hrs.)	4800.0
4 (Dry film thickness)	1200.0
5 (Cross hatch adhesion test)	1500.0
6 (Impact resistance test)	1500.0
7 (Pencil hardness test)	1500.0
8 (Bend Test)	1200.0
9 (Gloss)	1200.0
10 (Salt Spray (ASTM B117) 100 hrs)	5000.0
11 (Wasahbility and cleanibility)	2000.0
12 (Drying Time (a) Surface dry)	1200.0
13 (Drying time (b) Hard dry)	1200.0
14 (Finish)	1200.0
15 (VOC (%by mass))	3000.0
17 (Resistance to alkali)	1500.0
18 (Accelerated storage stability)	3000.0