NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1771

National Test House (WR), Mumbai

ASTM / IS / EN - Block Jointing Mortar

Block Jointing Mortar

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. No. 6 of ASTM C 1660 - 2009 (Splitting Tensile Strength Test, Splitting Tensile Strength in N/mm^2)	5000.0
ASTM D 7234 (Pull out Adhesion Strength of mortar to block, MPa)	5000.0

1772

National Test House (SR), Chennai

IS 14871:2000 - PRODUCTS IN FIBRE REINFORCED CEMENT —LONG CORRUGATED OR ASYMMETRICAL SECTION SHEETS AND FITTINGS FOR ROOFING AND CLADDING

PRODUCTS IN FIBRE REINFORCED CEMENT —LONG CORRUGATED OR ASYMMETRICAL SECTION SHEETS AND FITTINGS FOR ROOFING AND CLADDING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5.1.1. & B1 (Distance Between Extreme Complete Corrugation Pitch, a)	500.0
5.5.1.1. & B1 (Measurement of Corrugation Height, h)	500.0
B2 (Dimension-Length)	500.0
B2 (Dimension-width)	500.0
B3 (Dimension-Thickness)	1000.0
B4 (Dimension: Squareness)	500.0
B5 (Dimension: Height of Edges)	500.0
5.5.1.2 (Mechanical characteristics: Breaking Load)	5000.0
5.5.1.2 (Apparent density)	1000.0
5.5.2.b. (Impermeability)	4000.0

1773

National Test House (ER), Kolkata

IS 5154-Part 1- 2013 (2013) - LEAD-ACID TRACTION BATTERIES PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST [ Bag plate Lead Acid Secondary Battery)

LEAD-ACID TRACTION BATTERIES PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST [ Bag plate Lead Acid Secondary Battery)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Capacity Test on the lines of IS 5154 - Part 1 Sample shall meets the requirements ,Ca = 0,85 CN at the first cycle; Ca = 1,00 CN at or before the tenth cycle. Charging Current . Specific Gravity and Cut off Voltage as per Manufacturer instruction)	20000.0
6.1 (Energy Density Test)	5000.0

1774

National Test House (WR), Mumbai

IS 1285 (2023) - Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Chemical Analysis (as per IS 733))	5000.0
10 (Tensile Strength (as per IS 733))	1000.0
10 (0.2 % Proof Stress (as per IS 733))	1000.0
10 (% Elongation (as per IS 733))	1000.0
8 (Dimension)	1000.0
4 (Mass per meter)	1000.0
6 (Freedom from Defect)	1000.0
8 (Copper, % by mass)	600.0
8 (Magnesium, % by mass)	600.0
8 (Silicon, % by mass)	600.0
8 (Iron, % by mass)	600.0
8 (Manganese, % by mass)	600.0
8 (Zinc, % by mass)	600.0
8 (Titanium, % by mass)	600.0
8 (Others, % by mass)	600.0
8 (Chromium, % by mass)	600.0
8 (Aluminium, % by mass)	600.0
4 (Dry Film Thickness - Powder Coating as per IS 13871 by Test Method 5 of IS 101 Part-3 Sec.2 1989 or any other test method specified by the customer)	1500.0

1775

National Test House (ER), Kolkata

CUSTOM - Fish Food

Fish Food

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Protein content)	2000.0

1776

National Test House (NWR), Jaipur

IS 2629 (1985 (Reaffirmed 2021)) - Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification

Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Mass of Coating)	2000.0

1777

National Test House (WR), Mumbai

IS 2086 (1993) - Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision)

Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1778

National Test House (WR), Mumbai

Custom - Berger QUV test - QUV test of Paint and Coating

QUV test of Paint and Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-2 (Salt spry for 96 hrs)	5000.0

1779

National Test House (WR), Mumbai

IS 2086 (1993) - Carriers and Bases in Electrical Fuses for voltages up to 650 V - Specification

Carriers and Bases in Electrical Fuses for voltages up to 650 V - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (All possible tests as per customer requirement)	20000.0

1780

National Test House (ER), Kolkata

2664 - Specification for Quenching Oil

Specification for Quenching Oil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Ash, Percent by mass)	1000.0
4 (Pour point, Dg C)	1000.0
6 (Kinematic Viscosity at 40 Dg C, cSt)	1000.0
7 (Viscosity Index)	1000.0
8 (Saponification Value)	1000.0
9 (Volatility (Loss on heating at 150 dg C for two hours))	1000.0
11 (Copper strip corrosion test at 100 dg C for 3h)	1000.0

1781

National Test House (WR), Mumbai

IS 9968 : Part 1 (1984) - Elastomer Insulated Cables

Elastomer Insulated Cables

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.2 (Conductor Resistance)	2000.0
21.1 (Insulation resistance)	1000.0
22.1 (High voltage (water immersion) test)	1000.0
22.1 (Flammability test)	1000.0

1782

National Test House (WR), Mumbai

IS 3384 (1986) - bitumen primer for use in waterproofing and damp-proofing

bitumen primer for use in waterproofing and damp-proofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1(v)c (Test on residue from distillation upto 360 dg , c)matter soluble in carbon disulphide or ccl4 or tce)	1200.0
3.1(v)b (Test on residue from distillation upto 360 dg , b)penetration 25 dg 100g 5 sec)	1200.0
3.1(v) a (Test on residue from distillation upto 360 dg , a)ductility)	1200.0
3.1(iv) (water Content )	1200.0
3.1(iii) (Flash point pensky martens closed type)	1200.0
ADDITIONAL pARAMETER (Specific gravity)	1200.0

1783

National Test House (SR), Chennai

IS 14862:2000 - Fibre cement flat sheets-Specification

Fibre cement flat sheets-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Dimensional and Geometrical Characteristics)	2000.0
5.2.1 (Mechanical and Physical Characteristics-Bending strength)	4000.0
5.2.2 (Mechanical and Physical Characteristics-Apparent density)	1000.0
6.1 (Type characteristics-Bending strength)	8000.0
6.2 (Type characteristics-Water impermeability)	4000.0
6.3 (Type characteristics-Frost Resistance)	25000.0
6.4 (Type characteristics-Warm water)	25000.0
6.6 (Type characteristics- Heat rain test)	100000.0
6.5 (Type characteristics-soak- dry test)	25000.0

1784

National Test House (NR), Ghaziabad

IRC 137-2022 (2022) - Guideline on use of Fibre-reinforced polymer bars in road projects

Guideline on use of Fibre-reinforced polymer bars in road projects

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2.5.1 (Mean measured cross sectional area ASTM D7205)	1000.0
4.1 (Guaranteed Ultimate tensile strength, ASTM D 7205)	3000.0
0 (Mean Tensile Modulus of Elasticity, ASTM D 7205)	2000.0
4.1 (Mean Ultimate Tensile Strain, ASTM D 7205)	3000.0
0 (Guuaranteed Transeverse Shear Strength, ASTM D 7617)	5000.0
0 (Guuaranteed Bond Strength, ASTM D 7913)	10000.0
0 (Mean moisture Absorption to Saturation, ASTM D570)	1000.0

1785

National Test House (NWR), Jaipur

IS 2250:1981 - Code of Practice for Preparation and use of Masonry Mortars

Code of Practice for Preparation and use of Masonry Mortars

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6,Table 1 (Grade of Mortar-Mortar mix ratio (IS 1199))	5000.0
Custom ( ref 5.1.4) (Sulphate content)	1200.0
Custom (Chloride content)	1200.0

1786

National Test House (NWR), Jaipur

IS 17425 (2020) - Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1.2 (IS:17425 & Annex-A(Acceptance test))	5000.0
7.1.1 (IS:17425 (Visual Appearance))	500.0
6.2.1 (IS:2530 (C.B.C))	2000.0
4.1.4 (IS:2530 (CBD))	1000.0
7.1.3 (IS:17425 (Reversion))	1000.0
5.1.2 (IS:17425 (Ovality))	500.0
7.1.4 (IS:17425 & Annex-D (Tensile Strength))	2000.0
7.1.4 (IS:17425 & Annex-D (Elongation at Break))	2000.0
7.1.7 (IS:2530 (MFR))	2000.0
7.1.6 (IS:7328 (Density))	2000.0
7.1.2 (IS:17425 & Annex-A) (Quality test))	5000.0
5.1.1 (IS:17425 (OD))	500.0
5.1.1 (IS:17425 (Wall thickness))	500.0
7.2.1 (IS:17425 (Leakage Test))	5000.0

1787

National Test House (ER), Kolkata

EN 438 (2016) - High Pressure decorative laminates(HPL) - Sheets based on thermosetting resins(Usually called laminates)-Part-3 : classification and Specifications for laminates less than 2 mm thick intended for bonding to supporting substrates.

High Pressure decorative laminates(HPL) - Sheets based on thermosetting resins(Usually called laminates)-Part-3 : classification and Specifications for laminates less than 2 mm thick intended for bonding to supporting substrates.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2.5 (Visual Inspection)	500.0
6.2.5.3 (Edge Quality)	500.0
6.3 (Thickness)	1000.0
6.3 (Edges Straightness)	1000.0
6.3 (Length)	500.0
6.3 (Width)	500.0
6.3 (Edges Squareness)	1000.0
6.3 (Flatness)	1000.0
6.4 (Resistance to Surface Wear)	5000.0
6.4 (Resistance to immersion in boiling water)	2000.0
6.4 (Resistance to Water Vapour)	2000.0
6.4 (Resistance to dry heat(160 deg.C))	2000.0
6.4 (Dimensional stability at elevated temperature)	2000.0
6.4 (Resistance to wet heat(100 deg.C))	2000.0
6.4 (Resistance to cracking under stress)	2000.0
6.4 (Resistance to scratching)	2000.0
6.4 (Resistance to staining)	5000.0
6.4 (Light Fastness(Xenon arc))	3000.0
6.4 (Density)	1000.0

1788

National Test House (NR), Ghaziabad

Cable tray - Cable tray

Cable tray

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension Tests)	1000.0
2 (Thickness Test)	1000.0
3 (Perforation area)	1000.0
4 (Galvanization Thickness Test)	2000.0
5 (Load Test with applying 1.7 times SWL)	3000.0
6 (Material Composition Test)	3000.0
2 (Salt Spray Test, 24 hours)	960.0

1789

National Test House (NR), Ghaziabad

Junction Box - Junction Box

Junction Box

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimensional Tests)	1000.0
2 (Thickness Test)	1000.0
3 (Mass of Zinc Coating)	2000.0
4 (Vertical Load Test)	3000.0

1790

National Test House (NR), Ghaziabad

Race Way - Race Way

Race Way

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Dimensional Tests)	1000.0
1 (Thickness Test)	1000.0
2 (Mass of Zinc Coating)	2000.0
3 (Material Composition Test)	3000.0
4 (Vertical Load Test)	3000.0

1791

National Test House (SR), Chennai

IS 16714:2018 - Ground Granulated Blast Furnace Slag for Use in Cement, Mortar and Concrete

Ground Granulated Blast Furnace Slag for Use in Cement, Mortar and Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 Table 1 (Chemical Requirements of GGBS)	5000.0
5.2 (Moisture content of GGBS)	1000.0
6,Table 2 (Physical requirements)	5000.0

1792

National Test House (NWR), Jaipur

IS 1161 (2014) - Steel tubes for structural purposes - Specification (Fifth Revision)

Steel tubes for structural purposes - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.3.1 (Cold Bend Test up to 50 mm NB)	1000.0
11.3.2 (Flattening Test above 50 mm NB)	1000.0
11.2 (Percentage Elongation, %)	1000.0
11.2 (Yield Strength, MPa)	1000.0
11.2 (Tensile Strength, MPa)	1000.0
6 (Dimension)	1000.0
6 (Mass per meter, kg/m)	1000.0
8 (Coating thickness, micron)	2000.0
5 (Chemical Composition)	2500.0

1793

National Test House (ER), Kolkata

CUSTOM-23-ER-MCALI - Calibration of Ultrasonic Thickness Gauge

Calibration of Ultrasonic Thickness Gauge

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	1200.0

1794

National Test House (ER), Kolkata

CUSTOM-22-ER-MCALI - Calibration of Wheel Gauge (B.G) for thick and wear adopter profile

Calibration of Wheel Gauge (B.G) for thick and wear adopter profile

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	1200.0

1795

National Test House (ER), Kolkata

CUSTOM-21-ER-MCALI - Calibration of Wheel Diameter Gauge

Calibration of Wheel Diameter Gauge

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	1200.0

1796

National Test House (ER), Kolkata

CUSTOM-20-ER-MCALI - Calibration of Buffer Height Gauge

Calibration of Buffer Height Gauge

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	1200.0

1797

National Test House (ER), Kolkata

CUSTOM-19-ER-MCALI - Calibration of WHEEL DISTANCE GAUGE

Calibration of WHEEL DISTANCE GAUGE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	1200.0

1798

National Test House (ER), Kolkata

CUSTOM - WOODEN SAWDUST BRIQUETTE

WOODEN SAWDUST BRIQUETTE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (ASH CONTENT)	1000.0
2 (GROSS CALORIFIC VALUE)	2000.0
3 (Moisture)	1000.0

1799

National Test House (ER), Kolkata

CUSTOM-18-ER-MCALI - Calibration of BORE GAUGE

Calibration of BORE GAUGE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Length)	1200.0
1 (Length)	3000.0

1800

National Test House (ER), Kolkata

CUSTOM-17-ER-MCALI - Calibration of COUNTER LIMIT GAUGE NO.2

Calibration of COUNTER LIMIT GAUGE NO.2

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	1200.0