| 1681 |
National Test House (ER), Alipore
| IS 15549 ,Reaffirmed 2020 (2005 Reaffirmed 2020) - Stationary valve regulated lead acid batteries - Specification |
Stationary valve regulated lead acid batteries - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 to 4.9 and 8.1 (Visual Examination) |
20000.0 |
|
| 12.1 (Test for C10 Capacity and Voltage during discharge) |
20000.0 |
|
| 12.2 (Test for C1 Capacity and Voltage during discharge) |
20000.0 |
|
| 12.4 &12.5 (Ampere-hour and watt hour efficiency test) |
10000.0 |
|
| 12.6 (Test for retention of charge) |
10000.0 |
|
| 12.9 (Test for Oxygen recombination efficiency test) |
15000.0 |
|
| 12.1 (Endurance Life Cycle Test) |
80000.0 |
|
| NA (Checking of dimension as per Manufacturer drawing) |
500.0 |
|
|
| 1682 |
National Test House (ER), Alipore
| IS 6304 (1992) - Stationary batteries - Lead - Acid type - With pasted positive plates - Specification (Second Revision) |
Stationary batteries - Lead - Acid type - With pasted positive plates - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1,4.2,4.5,4.7&4.11 (Physical Verification) |
25000.0 |
|
| 6 (Physical Verification) |
500.0 |
|
| 8.6 (Capacity) |
20000.0 |
|
| 8.7 (Capacity) |
10000.0 |
|
| 8.8.1 (Ampere- Hour Efficiency) |
7500.0 |
|
| 8.8.2 (Watt Hour Efficiency) |
7500.0 |
|
| 8.9 (Capacity) |
45000.0 |
|
|
| 1683 |
National Test House (ER), Alipore
| JISC 8702 : 2009 - Small- sized valve regulated lead-acid batteries |
Small- sized valve regulated lead-acid batteries |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 of JISC 8702-1:2009 (Capacity at 20 hr rate) |
20000.0 |
|
| 5.3 of JISC 8702-1:2009 (Cycle service Endurance) |
200000.0 |
|
| 5.4 of JISC 8702-1:2009 (Storage characteristic Test) |
20000.0 |
|
| 5.2 of JISC 8702-1:2009 (High rate discharge characteristics) |
20000.0 |
|
| 5.5 of JISC 8702-1:2009 (Maximum permissible current Characteristic) |
15000.0 |
|
| 5.6 of JISC 8702-1:2009 (Charge Acceptance characteristic after deep discharge.) |
15000.0 |
|
| 5.7 of JISC 8702-1:2009 (Endurance in Trickle application) |
100000.0 |
|
| 5.8 of JISC 8702-1:2009 (Endurance in trickle application at 40 Deg C) |
130000.0 |
|
| 5.11 of JISC 8702-1:2009 (Vibration Resistance Characteristics) |
15000.0 |
|
| 5.9.b of JISC 8702-1:2009 (Gas emission intensity II) |
15000.0 |
|
| 5.10.b of JISC 8702-1:2009 (Gas recombinating characteristic - Liquid leakage resistance characteristics) |
15000.0 |
|
|
| 1684 |
National Test House (ER), Alipore
| IS 16270 (2023) - Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test |
Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.1 (Rated Capacity) |
20000.0 |
|
| 8.2 (Endurance Test) |
80000.0 |
|
| 8.3 (Charge retention test) |
10000.0 |
|
| 8.4 (Cycling Endurance in photovoltaic application( Extreme Conditions)) |
90000.0 |
|
| 8.5 (Recovery from sulphation Test) |
10000.0 |
|
| 8.6 (Water loss Test) |
10000.0 |
|
| 8.1 (Rated Capacity Test (1000Ah)) |
40000.0 |
|
| 8.2 (Endurance Test (1000Ah)) |
160000.0 |
|
| 8.3 (Charge retention test (1000Ah)) |
20000.0 |
|
| 8.4 (Cycling Endurance in photovoltaic application( Extreme Conditions) (1000Ah))) |
180000.0 |
|
| 8.5 (Recovery from sulphation Test (1000Ah)) |
20000.0 |
|
| 8.6 (Water loss Test (1000Ah)) |
20000.0 |
|
| 8.1 (Long Duration Capacity Test) |
20000.0 |
|
|
| 1685 |
National Test House (ER), Alipore
| IRS:S88/2004 (2004) - LOW MAINTENANCE LEAD ACID STATIONARY SECONDARY CELLS FOR S&T INSTALLATIONS |
LOW MAINTENANCE LEAD ACID STATIONARY SECONDARY CELLS FOR S&T INSTALLATIONS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2 (Verification of constructional Requirements) |
500.0 |
|
| 7.3 (Verification of Marking) |
500.0 |
|
| 7.4 (Verification of dimension) |
500.0 |
|
| 7.5 (Test for Capacity) |
20000.0 |
|
| 7.6 (Test for loss of capacity on storage) |
10000.0 |
|
| 7.7 (Endurance Test) |
45000.0 |
|
| 7.8 (Ampere Hour & Watt Hour Efficiency Test) |
20000.0 |
|
| 7.9 (Test for voltage during discharge) |
5000.0 |
|
| 7.10 (Life Test) |
240000.0 |
|
| 7.11 (Storage Test) |
10000.0 |
|
| 7.12 (Water loss Test) |
5000.0 |
|
| 7.13 (Equilibrium Float Current Test) |
5000.0 |
|
| 7.14 (Sulphation Test) |
20000.0 |
|
| 7.15 (Air Pressure Test on containers consisting of finished cell/Battery) |
10000.0 |
|
|
| 1686 |
National Test House (ER), Alipore
| IEC 60896 : Part 21-22 (2004) - Stationary Lead Acid Batteries Valve Regulated Type |
Stationary Lead Acid Batteries Valve Regulated Type |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Gas Emission Test) |
30000.0 |
|
| 6.6 (Content and durability of required marking) |
500.0 |
|
| 6.2 (High Current tolerance Test) |
20000.0 |
|
| 6.7 (Material Identification) |
3000.0 |
|
| 6.11 (Discharge Capacity) |
60000.0 |
|
| 6.12 (Charge retention during Storage) |
50000.0 |
|
| 6.13 (Float Service with daily discharges) |
30000.0 |
|
| 6.14 (Recharge behaviour) |
30000.0 |
|
| 6.15 (Service Life at an operating temp. at 40 Deg C) |
300000.0 |
|
| 6.16 (Impact of a stress temperature of 50Deg C or 60 Deg C) |
250000.0 |
|
| 6.17 (Abusive over discharge) |
60000.0 |
|
| 6.19 (Low temperature sensitivity) |
30000.0 |
|
|
| 1687 |
National Test House (ER), Alipore
| IS 5154(Part 1 & 2): 2013 (2013) - Lead Acid Traction Batteries |
Lead Acid Traction Batteries |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4 (1 h High rate discharge performance test) |
20000.0 |
|
| 5.2 of IS 5154(Part-1)-2013 (5 h Capacity Test) |
25000.0 |
|
| 5.5 of IS 5154 (Part-1)-2013 (Cyclic Endurance Test) |
90000.0 |
|
| 3 and 5 of IS 5154(Part-2)-2013 (Dimensions of Traction Batteries) |
1000.0 |
|
| 5.3 (Charge retention test) |
20000.0 |
|
|
| 1688 |
National Test House (ER), Alipore
| IS:1554 ( Part 1 ) - 1988 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1(a).(1),15.2(a) (Annealing test ( for copper )) |
1000.0 |
|
| 15.2(b),15.1(a).(2) (Tensile test ( for aluminium )) |
1000.0 |
|
| 15.1(a).(3),15.2(c) (Wrapping test ( for aluminium )) |
500.0 |
|
| 15.1(a).(4),15.2(d),15.3(a) (Conductor resistance test) |
2000.0 |
|
| 15.2(e),15.1(c) (Test for thickness of insulation and sheath) |
1000.0 |
|
| 15.2(f), (Tensile strength and elongation at break of insulation and sheath) |
1000.0 |
|
| 15.2(g),15.1(e) (Insulation resistance test) |
1500.0 |
|
| 15.2(h),15.1(g) (High voltage test at room temperature) |
1000.0 |
|
| 15.1.1 , 15.2.1 (Oxygen index test) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Temperature index) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Flame retmdance test on single cable) |
5000.0 |
|
| 15.1.1 (Flame retardance test on bunched cables) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Test for halogen acid gas evolution) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Smoke density) |
5000.0 |
|
| 15.1(b) (Test for armouring wires/strips-Dimension) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Tensile strength) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Elongation at break) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Torsion test for round wires) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Winding test for formed wires) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Uniformity of zinc coating) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Mass of zinc coating) |
2000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Resistivity) |
2000.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Tensile strength and elongation at break) |
1500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Ageing in air oven) |
2000.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Shrinkage test) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Hot deformation) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Loss of mass in air oven) |
1500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Heat shock test) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Thermal stability) |
1000.0 |
|
| 15.1(f) (High voltage test ( water immersion test )) |
3000.0 |
|
| 15.1(h) (Flammability test) |
500.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
| - (Test on 4th core) |
2000.0 |
|
|
| 1689 |
National Test House (ER), Alipore
| IS 7098 : Part 1 : 1988 (Reaffirmed Year : 2020), Amendments : 5 - Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage up to and including 1100 V |
Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage up to and including 1100 V |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1.a.i , 15.2.a (Tests on Conductor - Annealing Test (for copper)) |
1000.0 |
|
| 15.1.a.ii , 15.2.b (Tests on Conductor - Tensile Test (for Aluminium)) |
1000.0 |
|
| 15.1.a.iii , 15.2.c (Tests on Conductor - Wrapping Test (for Aluminium)) |
500.0 |
|
| 15.1.a.iv , 15.2.d (Tests on Conductor - Resistance Test) |
2000.0 |
|
| 15.1.b.1 (Test for round steel wire/formed steel wire(strip) armour - Dimensions) |
500.0 |
|
| 15.1.b.2.i (Test for round steel wire/formed steel wire(strip) armour - Tensile Strength) |
1000.0 |
|
| 15.1.b.2.ii (Test for round steel wire/formed steel wire(strip) armour - Elongation at Break) |
1000.0 |
|
| 15.1.b.2.iii (Test for round steel wire/formed steel wire(strip) armour - Torsion test for round wires) |
1000.0 |
|
| 15.1.b.2.iv (Test for round steel wire/formed steel wire(strip) armour - winding test for formed wires) |
1000.0 |
|
| 15.1.b.2.v (Test for round steel wire/formed steel wire(strip) armour - Uniformity of zinc coating) |
1000.0 |
|
| 15.1.b.2.vi (Test for round steel wire/formed steel wire(strip) armour - Mass of zinc coating) |
2000.0 |
|
| 15.1.b.2.vii (Test for round steel wire/formed steel wire(strip) armour - Resistivity) |
2000.0 |
|
| 15.1.c , 15.2.e (Test for thickness of insulation and sheath) |
1000.0 |
|
| 15.1.d.i , 15.2.g (Physical test for insulation - Tensile strength and elongation at breakj) |
1500.0 |
|
| 15.1.d.ii (Physical test for insulation - Ageing in oven) |
2000.0 |
|
| 15.1.d.iii , 15.2.f (Physical test for insulation - Hot set test) |
1000.0 |
|
| 15.1.d.iv (Physical test for insulation - Shrinkage test) |
1000.0 |
|
| 15.1.d.v (Physical test for insulation - Water absorption test (gravimetric))) |
1000.0 |
|
| 15.1.e.i , 15.2.g (Physical tests for outer sheath - Tensile strength and elongation at break) |
1000.0 |
|
| 15.1.e.ii (Physical tests for outer sheath - Ageing in air oven) |
1000.0 |
|
| 15.1.e.iii (Physical tests for outer sheath - Loss of mass in air oven) |
1000.0 |
|
| 15.1.e.iv (Physical tests for outer sheath - Shrinkage test) |
500.0 |
|
| 15.1.e.v (Physical tests for outer sheath - Hot deformation test) |
500.0 |
|
| 15.1.e.vi (Physical tests for outer sheath - Heat shock test) |
500.0 |
|
| 15.1.e.vii (Physical tests for outer sheath - Thermal stability) |
1000.0 |
|
| 15.1.f , 15.2.j (Insulation resistance (Volume resistivity test)) |
2000.0 |
|
| 15.1.g , 15.2.h (High voltage test) |
2000.0 |
|
| 15.1.h (Flammability test) |
500.0 |
|
| 15.1.1.C1.a , 15.1.1.C2.a , 15.2.1.C1.a , 15.2.1.C2.a (Oxygen Index Test (for Category C1 & C2)) |
5000.0 |
|
| 15.1.1.C1.b , 15.1.1.C2.b , 15.2.1.C1.b , 15.2.1.C2.b (Flame retardance test on single cable (for category C1 & C2)) |
5000.0 |
|
| 15.1.1.C1.c , 15.1.1.C2.c , (Flame retardance test on bunched cable) |
5000.0 |
|
| 15.1.1.C1.d , 15.1.1.C2.g (Temperature Index) |
5000.0 |
|
| 15.1.1.C2.e (Smoke density) |
5000.0 |
|
| 15.1.1.C2.f , 15.2.1.C2.d (Test for halogen acid gas evolution) |
5000.0 |
|
| - (Test on 2nd Core) |
2000.0 |
|
| - (Test on 3rd Core) |
2000.0 |
|
| - (Test on 4th Core) |
2000.0 |
|
| - (Test on 5th Core) |
2000.0 |
|
| - (Test on 6th Core) |
2000.0 |
|
| - (Test on 7th core) |
2000.0 |
|
| - (Test on 8th Core) |
2000.0 |
|
| 15.4(a) (Cold bend test for outer sheath) |
1500.0 |
|
| 15.4(b) (Cold Impact Test for outer sheath) |
1500.0 |
|
| 15.4(c) (Resistance Test for armour (other than mining cable) (Optional Test)) |
1500.0 |
|
|
| 1690 |
National Test House (ER), Alipore
| IS 14257 (2019) - Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision) |
Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.3.1 (Physical Examination) |
20000.0 |
|
| 9.3.2 (Dimensions and layout) |
500.0 |
|
| 9.3.3 (Marking) |
500.0 |
|
| 9.3.4 (5-hr capacity Test) |
20000.0 |
|
| 9.3.5 (High rate discharge test at -15℃) |
20000.0 |
|
| 9.3.6 (Cold cranking Ampere at -18℃) |
20000.0 |
|
| 9.3.7 (Reserve Capacity Test) |
20000.0 |
|
| 9.3.8 (Charge Acceptance test) |
15000.0 |
|
| 9.3.9 (water loss in percent) |
10000.0 |
|
| 9.3.10 (Charge retention test) |
5000.0 |
|
| 9.3.11 (Light load Endurance test) |
30000.0 |
|
| 9.3.12 (Life cycle test) |
50000.0 |
|
| 9.3.13 (Over-charge Endurance test) |
5000.0 |
|
| 9.3.14 (Electrolyte retention test) |
5000.0 |
|
| 9.3.15 (Vibration resistance test) |
10000.0 |
|
| 9.3.16 (Strength of terminal test) |
5000.0 |
|
| 9.3.17 (Robustness to fastening test) |
5000.0 |
|
| Annex. B-1.2 (Residual Capacity Test) |
10000.0 |
|
|
| 1691 |
National Test House (ER), Alipore
| IS 7372 (1995) - Lead - Acid storage batteries for motor vehicles - Specification (First Revision) |
Lead - Acid storage batteries for motor vehicles - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.3 (Physical Examination) |
20000.0 |
|
| 9.4 (Dimensions and layout) |
500.0 |
|
| 9.5 (Marking) |
500.0 |
|
| 9.6 (Air Pressure Test) |
10000.0 |
|
| 9.7 (Capacity Test) |
25000.0 |
|
| 9.9 (High rate discharge test at Normal Temperature) |
15000.0 |
|
| 9.10 (High rate discharge test at Low Temperature) |
20000.0 |
|
| 9.12 (Retention of Charge Test) |
15000.0 |
|
| 9.13 (Resistance to Over Charge Test) |
10000.0 |
|
| 9.14 (Life Test) |
60000.0 |
|
| 9.15 (Storage Test) |
25000.0 |
|
| 9.8 (Vibration Test) |
10000.0 |
|
|
| 1692 |
National Test House (ER), Alipore
| IS 2026 : Part 11 (2021) - Power Transformers Part 11 Dry-Type Transformers |
Power Transformers Part 11 Dry-Type Transformers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl No 14.2.5 (Applied Voltage Test) |
2500.0 |
|
| 14.2.6 (Induced Voltage Withstand Test) |
4000.0 |
|
| 14.2.4 (Measurement of No Load Loss & Current) |
6000.0 |
|
| 14.2.3 (Measurement of Short Circuit Impedance and Load Loss) |
8000.0 |
|
| 14.2.2 (Measurement of Voltage Ratio and Check of phase Displacement) |
2000.0 |
|
| 14.2.1 (Measurement of Winding Resistance) |
1000.0 |
|
| 14.3.2 (Temperature Rise Test) |
40000.0 |
|
| Cl. 21.2(e) of IS 1180 (Part 1) (Measurement of Insulation resistance) |
1500.0 |
|
|
| 1693 |
National Test House (ER), Alipore
| JIS D 5301:2006 - Lead Acid starter Batteries |
Lead Acid starter Batteries |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1694 |
National Test House (ER), Alipore
| IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1.i.a, ii.d , iii.a.4 (Conductor Resistance) |
1500.0 |
|
| Table 1. iii. a.1 , ii.a (Annealing Test (for copper)) |
1000.0 |
|
| Table 1. iii. a.2 , ii.b (Tensile Test for aluminium) |
1000.0 |
|
| Table 1. iii. a.3 , ii.c (Wrapping Test (for Aluminium)) |
500.0 |
|
| Table 1. iii. a.5 (Persulphate Test (for tinned copper conductor only))) |
1000.0 |
|
| Table 1. iii. b , ii.e (Tests for overall dimension and thickness of insulation/sheath) |
1000.0 |
|
| Table 1. iii. c.6 (Physical tests for insulation - Hot deformation Test) |
500.0 |
|
| Table 1. iii. c.1, ii.f (Physical tests for insulation- Tensile strength and elongation at break) |
1500.0 |
|
| Table 1. iii. c.2 (Physical tests for insulation - Loss of mass test) |
1500.0 |
|
| Table 1. iii. c.3 (Physical tests for insulation - Ageing in air oven) |
2000.0 |
|
| Table 1. iii.c.4 (Physical tests for insulation - Shrinkage test) |
1000.0 |
|
| Table 1. iii.c.5 (Physical tests for insulation - Heat shock test) |
1000.0 |
|
| Table 1. iii.c.7 (Physical tests for insulation - Thermal stability test) |
1000.0 |
|
| Table 1. iii. e.5, ii.j (Flammability Test) |
500.0 |
|
| Table 1. iii. c.11 , ii.k (Physical tests for insulation - Oxygen index test) |
5000.0 |
|
| Table 1. iii. c.12 , ii.m (Physical tests for insulation - Test for temperature index) |
5000.0 |
|
| Table 1. iii. c.13 , ii.n (Physical tests for insulation - Test for halogen acid gas evaluation) |
5000.0 |
|
| Table 1. iii. c.14 , ii.p (Physical tests for insulation - Test for smoke density rating) |
5000.0 |
|
| Table 1. iii. d.1 (Physical tests for sheath - Tensile strength and elongation at break) |
1500.0 |
|
| Table 1. iii. d.2 (Physical tests for Sheath - Loss of mass Test) |
1500.0 |
|
| Table 1. iii. d.3 (Physical tests for sheath - Ageing in air oven) |
2000.0 |
|
| Table 1. iii. d.4 (Physical tests for sheath - Shrinkage Test) |
500.0 |
|
| Table 1. iii. d.5 (Physical tests for sheath - Heat shock Test) |
500.0 |
|
| Table 1. iii. d.6 (Physical tests for sheath - Hot deformation Test) |
500.0 |
|
| Table 1. iii. d.7 (Physical tests for sheath - Thermal stability) |
1000.0 |
|
| Table 1. iii. d.8 (Physical tests for sheath - Oxygen Index Test) |
5000.0 |
|
| Table 1. iii. d.9 (Physical tests for sheath - Test for temperature Index) |
5000.0 |
|
| Table 1. iii. d.10 (Physical tests for sheath - Halogen acid gas evaluation) |
5000.0 |
|
| Table 1. iii. d.11 (Physical tests for sheath - Test for smoke density) |
5000.0 |
|
| Table 1. iii. e.1 (High Voltage Test (Water immersion Test)) |
3000.0 |
|
| Table 1. iii. e.2 , ii.h (High voltage test or Spark test) |
1500.0 |
|
| Table 1.iii.e.3 , ii.g (Insulation resistance) |
2000.0 |
|
| Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature)) |
1500.0 |
|
| Table 1. iii. e.6 (Addition Ageing test (OU Cables only)) |
2000.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
| - (Test on 4th core) |
2000.0 |
|
|
| 1695 |
National Test House (ER), Alipore
| IS/IEC : 60529 (2001 reaff : 2019) - Degree of Protection Provided by Enclosure(IP CODE) |
Degree of Protection Provided by Enclosure(IP CODE) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 13.2 First Characteristic Numeral 1 (Protection against solid foreign object of 50mm dia and greater,First Characteristic Numeral 1, cl 13.2) |
7500.0 |
|
| 13.2 First Characteristic Numeral 2 (First Characteristic Numeral 2,Protection against solid foreign objects of 12.5 mm dia and greater.) |
7500.0 |
|
| 13.2 First Characteristic Numeral 3 (First Characteristic Numeral 3, Protection against solid foreign objects of 2.5 mm dia and greater.) |
7500.0 |
|
| 13.2 First Characteristic Numeral 4 (Protection against solid foreign objects of 1.0 mm dia and greater,First Characteristic Numeral 4) |
7500.0 |
|
| 13.4/13.5 First Characteristic Numeral 5 (Dust Protected) |
7500.0 |
|
| 13.4/13.5 First Characteristic Numeral 6 (No ingress of Dust) |
7500.0 |
|
| 14.2.1 Second Characteristic Numeral 1 (Protected against vertically falling water drops) |
7500.0 |
|
| 14.2.2 Second Characteristic numeral 2 (Protection against vertically falling water drops when enclosure tilted upto 15 degree) |
7500.0 |
|
| 14.2.3 second characteristic numeral 3 (14.2.3 second characteristic numeral 3 :Protected against spring water) |
7500.0 |
|
| 14.2.4 Second characteristic numeral 4 (14.2.4 Second characteristic numeral 4 :Protected against splashing water) |
7500.0 |
|
| 14.2.5 Second characteristic numeral 5 (Protection against water Jets,14.2.5 Second characteristic numeral 5) |
7500.0 |
|
| 14.2.6 Second characteristic numeral 6 (14.2.6 Second characteristic numeral 6 : Protected against powerful Jet) |
7500.0 |
|
| 14.2.7, Second characteristic numeral 7 (14.2.7, Second characteristic numeral 7 :Protected against the effects of temporary immersion in water) |
7500.0 |
|
| 14.2.8, Second Characteristic numeral 8 (Protection against the effects of continuous immersion in water:14.2.8, Second Characteristic numeral 8) |
7500.0 |
|
| Drawing Verification withe respect to dimension (Drawing Verification with respect to dimension) |
3000.0 |
|
|
| 1696 |
National Test House (NER), Guwahati
| IS 2721 (2003) - Galvanized steel chain link fence fabric - Specification (Second Revision) |
Galvanized steel chain link fence fabric - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Uniformity of Zn coating) |
1000.0 |
|
| 8 (Mass of Zinc Coating) |
2000.0 |
|
|
| 1697 |
National Test House (ER), Alipore
| IS 2026 : Part 1 (2011) - Power Transformers: Part 1 General (Second Revision) |
Power Transformers: Part 1 General (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1.2(a) (Temp Rise) |
20000.0 |
|
| 10.1.3(d) (Measurement of Zero phase sequence impedance for 3
Phase transformer) |
3000.0 |
|
| 10.1.1(a) (Windlng Resistance) |
1600.0 |
|
| 10.1.1(b) (Voltage ratio & Phase Displacement) |
3200.0 |
|
| 10.1.3(g) (Measurement of Hormonices of the no load current) |
10000.0 |
|
| 10.1.1(d) (No Load loss and current) |
9600.0 |
|
| 10.1.3(j) (Measurement of Insulation Resistance) |
2400.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test) |
3000.0 |
|
| 10.1.1(e) (Induced Overvoltage) |
6400.0 |
|
| 10.1.3 (f) (Noise Level) |
10000.0 |
|
| 10.1.1(e) (AC voltage withstand test) |
4000.0 |
|
| 10.1.1 (C) (% impedance and load loss) |
12800.0 |
|
| 17.3.2 (a) of CBIP Pub. No. 317 (Vacuum Test - Type (Deflection)) |
10000.0 |
|
| 17.3.2 (b) of CBIP Pub. No. 317 (Oil Leakage Test (Pressure Test - Type)) |
10000.0 |
|
| 7 (Rating Plate Details) |
- |
|
| 7 (As per Specification) |
- |
|
| CBIP Publication no. 317 (Polarization Index Test) |
2500.0 |
|
| CBIP Publication no. 317 (Measurement of Unbalance Current) |
5000.0 |
|
|
| 1698 |
National Test House (ER), Alipore
| IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR
PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS. |
"METHODS OF SAMPLING AND TEST FOR
PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1699 |
National Test House (ER), Alipore
| IS 2932 (2013) - Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing |
Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1700 |
National Test House (ER), Alipore
| SLS 1126.1-2020 - Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test] |
Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test] |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.4.2,9.10 (Cranking performance for dry charge batteries) |
15000.0 |
|
| 9.1 (1st 20 h capacity Test) |
25000.0 |
|
| 9.2 (1st Reserve Capacity Test) |
20000.0 |
|
| 9.3.1 (cranking performance test) |
20000.0 |
|
| 9.6.1.1 (Corrosion Test) |
15000.0 |
|
| 9.6.2 (Endurance in cycle test) |
45000.0 |
|
| 9.5 (charge retention test) |
20000.0 |
|
| 9.4 (Charge Acceptance Test) |
15000.0 |
|
| 9.9 (Electrolyte Retention Test) |
10000.0 |
|
| 9.8 (Vibration Resistance Test) |
15000.0 |
|
| 9.7 (Water consumption Test) |
15000.0 |
|
| 9.6.1.2 (Endurance in cycle test) |
55000.0 |
|
| 9.1 (2nd 20 h capacity Test) |
25000.0 |
|
| 9.2 (2nd Reserve Capacity Test) |
20000.0 |
|
| 9.1 (3rd 20 h capacity Test) |
25000.0 |
|
| 9.2 (3rd Reserve Capacity Test) |
20000.0 |
|
| 8.2 (Initial charge prior to test) |
12000.0 |
|
|
| 1701 |
National Test House (ER), Alipore
| JIS D 5302-2004 - Lead Acid Batteries for Motorcycles |
Lead Acid Batteries for Motorcycles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3.2 (Capacity (10 hour rate)) |
25000.0 |
|
| 8.3.3 (High Rate Discharge test) |
15000.0 |
|
| 8.3.4 (Vibration resistance) |
20000.0 |
|
| Reference 1 (Deep Cycle Endurance) |
60000.0 |
|
| Reference 2 (Shallow Cycle Endurance) |
60000.0 |
|
| Reference 4 (Charge Retention test) |
20000.0 |
|
| Reference 3 (Characteristics of Electrolyte Decrease) |
30000.0 |
|
|
| 1702 |
National Test House (ER), Alipore
| IS 1652 (2013) - Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision) |
Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Verification of Constructional Requirements) |
5000.0 |
|
| 7 (Verification of Marking) |
2000.0 |
|
| 6.1 (Verification of Dimensions) |
3000.0 |
|
| 10.6 (Test for Capacity) |
25000.0 |
|
| 10.11 (Test for Voltage during Discharge) |
10000.0 |
|
| 10.10 (Ampere-hour and watt hour efficiency test) |
10000.0 |
|
| 10.8 (Test for loss of Capacity on Storage) |
10000.0 |
|
| 10.9 (Endurance Test) |
90000.0 |
|
| 10.12 (Loss of water test) |
10000.0 |
|
| 10.13 (Test for suitability of floating battery operation) |
10000.0 |
|
| 10.14 (Short circuit & Internal Resistance Test) |
15000.0 |
|
| - (Witness for Endurance Test) |
13000.0 |
|
|
| 1703 |
National Test House (NWR), Jaipur
| BSEN 13348 (2016) - Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum |
Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Tensile Strength) |
2000.0 |
|
| 6.2 (Elongation) |
1000.0 |
|
| 3.1 (Copper (% by mass)) |
500.0 |
|
| 6.1 (Phosphorus (% by mass)) |
1000.0 |
|
| 6.1 (Chemical Composition (% by mass)) |
2000.0 |
|
| 6.2 (Hardness) |
2000.0 |
|
| 8.6 (Drift Expansion test) |
2000.0 |
|
| 6.3 (Dimension - Outer Diameter mm, in accordanc e with BS EN 13348 (2016) Table 2, 3 and 4) |
1000.0 |
|
| 6.3 (Dimension - Thickness of the Tube in mm in accordance with BS EN 13348(2016) Table 2, 3 and 4) |
1000.0 |
|
| 8.5 (Bending Test) |
1000.0 |
|
| 6.1 (Cu + Ag) |
4000.0 |
|
|
| 1704 |
National Test House (ER), Alipore
| IS 13369 (1992) - Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification |
Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.2 (Verification of Constructional Requirements) |
20000.0 |
|
| 11.3 (Verification of Marking) |
1000.0 |
|
| 11.4 (Verification of Dimensions) |
1000.0 |
|
| 11.5 (Test for Capacity) |
20000.0 |
|
| 11.8 (Ampere-hour and watt hour efficiency test) |
10000.0 |
|
| 11.6 (Test for loss of Capacity on Storage) |
10000.0 |
|
| 11.7 (Endurance Test) |
45000.0 |
|
| 11.9 (Water loss test) |
10000.0 |
|
| 11.1 (Equilibrium Float current test) |
10000.0 |
|
| 11.5 (Test for Capacity at -13 deg C to -15 deg C) |
20000.0 |
|
|
| 1705 |
National Test House (ER), Alipore
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) [1100 kVA to 2 500 kVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
20000.0 |
|
| 21.3(b) (Temperatur Rise Test) |
40000.0 |
|
| 21.2(g) (Separate Source AC voltage withstand test) |
2500.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
5000.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
7000.0 |
|
| 21.2(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 21.2(b) (Measurement of voltage ratio and,check ofvoltage vector relationship) |
2000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
20000.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
1500.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), shortcurcuit impedance and load loss (At 50% and 100% load)) |
8000.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
6000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
4000.0 |
|
| 21.4(a) (Determination of sound levels) |
7000.0 |
|
| 21.4( e) (BDV of Oil in the tranformer) |
10000.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Air Pressure (Type test)-Deflection) |
20000.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
20000.0 |
|
| As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test) |
5000.0 |
|
| As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current) |
15000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
5000.0 |
|
| N.A. (Unbalance Current) |
5000.0 |
|
|
| 1706 |
National Test House (ER), Alipore
| Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore |
Customer Specification NTH ER Electrical Alipore |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Customer Specification NTH ER Electrical Alipore) |
5000.0 |
|
| 2 (Customer Specification NTH ER Electrical Alipore) |
10000.0 |
|
| 3 (Customer Specification NTH ER Electrical Alipore) |
15000.0 |
|
| 4 (Customer Specification NTH ER Electrical Alipore) |
20000.0 |
|
| 5 (Customer Specification NTH ER Electrical Alipore) |
25000.0 |
|
| 6 (Customer Specification NTH ER Electrical Alipore) |
30000.0 |
|
| 7 (Customer Specification NTH ER Electrical Alipore) |
35000.0 |
|
| 8 (Customer Specification NTH ER Electrical Alipore) |
40000.0 |
|
| 9 (Customer Specification NTH ER Electrical Alipore) |
45000.0 |
|
| 10 (Customer Specification NTH ER Electrical Alipore) |
50000.0 |
|
| 11 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
55000.0 |
|
| 12 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
60000.0 |
|
| 13 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
65000.0 |
|
| 14 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
70000.0 |
|
| 15 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
75000.0 |
|
| 16 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
80000.0 |
|
| 17 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
85000.0 |
|
| 18 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
90000.0 |
|
| 19 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
95000.0 |
|
| 20 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore) |
100000.0 |
|
| 21 (Customer Specification NTH ER Electrical Alipore) |
110000.0 |
|
| 22 (Customer Specification NTH ER Electrical Alipore) |
120000.0 |
|
| 23 (Customer Specification NTH ER Electrical Alipore) |
130000.0 |
|
| 24 (Customer Specification NTH ER Electrical Alipore) |
140000.0 |
|
| 25 (Customer Specification NTH ER Electrical Alipore) |
150000.0 |
|
| 26 (Customer Specification NTH ER Electrical Alipore) |
160000.0 |
|
| 27 (Customer Specification NTH ER Electrical Alipore) |
170000.0 |
|
| 28 (Customer Specification NTH ER Electrical Alipore) |
180000.0 |
|
| 29 (Customer Specification NTH ER Electrical Alipore) |
190000.0 |
|
| 30 (Customer Specification NTH ER Electrical Alipore) |
200000.0 |
|
|
| 1707 |
National Test House (ER), Alipore
| IS 1651 (2013) - Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision) |
Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.2 (Verification of Constructional Requirements) |
5000.0 |
|
| 12.3 (Verification of Marking) |
2000.0 |
|
| 12.4 (Verification of Dimensions) |
3000.0 |
|
| 12.5 (Capacity) |
25000.0 |
|
| 12.10 (Test for Voltage during Discharge) |
10000.0 |
|
| 12.9 (Ampere-hour and watt hour efficiency test) |
10000.0 |
|
| 12.7 (Test for loss of Capacity on Storage) |
10000.0 |
|
| 12.8 (Endurance Test) |
90000.0 |
|
| 12.11 (Water loss test) |
10000.0 |
|
| 12.12 (Test for suitability of floating battery operation) |
10000.0 |
|
| 12.13 (Short circuit & Internal Resistance Test) |
15000.0 |
|
| 12.13 (Short circuit & Internal Resistance Test(Current more than 1000 Amps)) |
15000.0 |
|
|
| 1708 |
National Test House (ER), Kolkata
| CUSTOM - COPPER ALLOY |
COPPER ALLOY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Copper, percent by mass) |
1200.0 |
|
| 2 (Lead, Percent by mass) |
1200.0 |
|
| 3 (Zinc) |
1200.0 |
|
|
| 1709 |
National Test House (NR), Ghaziabad
| RDSO Specification No. SPEC/E-7/17 (Rev.1) (2004) - Glass Banding Tape |
Glass Banding Tape |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl. 8.14 (Humidity Resistance Test) |
3000.0 |
|
| 8.15 (Saline Water Resistance Test) |
10000.0 |
|
| 8.16 (Cross Breaking Strength @R/T) |
2000.0 |
|
| 8.16 (Cross Breaking Strength after boiling in water for 14 days) |
10000.0 |
|
| 8.12.4 (Breaking Load @150°C after heat ageing after 48 hrs) |
3000.0 |
|
| 8.12.4 (Breaking Load @150°C after heat ageing after 96 hrs) |
3000.0 |
|
| 8.12.4 (Breaking Load @150°C after heat ageing after 144 hrs) |
3000.0 |
|
| 8.12.4 (Breaking Load @150°C after heat ageing after 192 hrs) |
3000.0 |
|
| 8.12.4 (Breaking Load @150°C after heat ageing after 240 hrs) |
3000.0 |
|
|
| 1710 |
National Test House (WR), Mumbai
| Customized Specification for Nylon PA 66 Roller(Finish Material) - Nylon PA 66 Roller(Finish Material) |
Nylon PA 66 Roller(Finish Material) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Density as per ASTM D 792) |
1000.0 |
|
| - (Shore D hardness as per ASTM D 2240) |
1000.0 |
|
| - (Water absorption as per ASTM D 570 for 24 hours) |
2000.0 |
|
| - (Base material identification by FTIR method) |
2000.0 |
|
|
