NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1741

National Test House (NR), Ghaziabad

IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Lead Restriction as metallic lead)	1500.0
4.3 table 1(i) (Drying time a) Hard dry)	1500.0
4.3 table 1(ii) (Consistency)	1000.0
4.3 table 1(iii) (Finish)	500.0
4.3 table 1(iv) (Wet opacity meter square per liter)	500.0
4.3 table 1(v) (Mass, kg/10 Litres,)	1000.0
4.3 table 1(vi) (Colour)	200.0
4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus))	1000.0
4.3 table 1(viii) (Stripping test ( By scratch hardness tester))	1000.0
4.3 table 1(ix) (Flash point deg.C)	1000.0
4.3 table 1(x) (Volatile matter content, percent by mass,)	1000.0
4.3 table 1(xi) (Resistance to humidity under conditions of condensation)	2000.0
4.3 table 1(xii) (Resistance to water)	1000.0
4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v))	1500.0
4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution))	1500.0
4.3 table 1(xv) (Resistance to chlorine (0.05 percent of chlorine (m/v).)	1000.0
4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,)	1500.0
4.3 table 1(xvii) (Keeping properties(12 Months))	5000.0

1742

National Test House (ER), Kolkata

Distilled water/Reagent water for Laboratory use (-) - Distilled water/Reagent water for Laboratory use

Distilled water/Reagent water for Laboratory use

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Electrical Conductivity micro siemens/cm at 25 deg C)	1000.0
2 (PH at 25 Deg C)	1000.0
3 (Sodium in ppm)	1000.0
4 (Chloride ppm)	1000.0

1743

National Test House (SR), Chennai

Custom-RVNL-TI/MI/040 (wef 05/04/2005) (2005) - Special Maintenance Instruction (SMI) to Measure the Severity of Pollution by Brush Wash Method

Special Maintenance Instruction (SMI) to Measure the Severity of Pollution by Brush Wash Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Salt deposit density (in mg/cm2))	2500.0

1744

National Test House (ER), Kolkata

IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Breaking Load of Completed Barbed Wire)	1000.0
12.1 (Tensile Strength of Line Wire)	1000.0
12.3 (Ductility)	1000.0
12.2.1 (Zinc Coating of Line wire)	2000.0
6 (Chemical composition (Carbon))	625.0
5 (Dimension/ Sizes)	1000.0
9 (Freedom from Defects)	500.0
6 (Chemical composition (Manganese))	625.0
6 (Chemical composition (Sulphur))	625.0
6 (Chemical composition (Phosphorus))	625.0
12.2.2 (Zinc Coating of Point wire)	2000.0
12.2.2 (Adhesion of Coating of Point wire)	1000.0
12.2.1 (Adhesion of Coating of Line wire)	1000.0

1745

National Test House (NR), Ghaziabad

TI/SPC/OHE/CAT(Cd-Cu)/0971 - Technical specification for Cadmium Copper for Overhead Electrical Traction

Technical specification for Cadmium Copper for Overhead Electrical Traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Chemical composition, percent by mass)	5000.0
8.3.5 (Electrical Resistance)	5000.0
4.8 (Mass, kg/m)	1000.0
8.3.2 (Measurement of diameter, mm)	2000.0
8.3.4 (Lay length and Lay ratio, mm)	3000.0
8.3.6 (Tensile strength for individual 19 wires)	9500.0
8.3.7 (Wrapping test)	1000.0
9.1.1 (Visual examination)	1000.0
9.1.2 (Diameter of Stranded conductor)	1000.0

1746

National Test House (NWR), Jaipur

IS 3204 (1978) - Specification for limestone for chemical industry (First Revision)

Specification for limestone for chemical industry (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 & 5.2.6 (Magnesium (as MgO))	1000.0
3.2 & 5.2.5 (Calcium (as CaO))	1000.0
3.2 & 5.2.4 (Iron (as Fe2O3))	1000.0
3.2 & 5.2.2 (Loss on ignition)	1000.0
3.2 & 5.2.3 (Silica (as SiO2))	1000.0
3.2 & 5.2.10 (Silica (as SiO2), Alumina(Al2O3) and ferric oxide as (Fe2O3) together)	3000.0

1747

National Test House (WR), Mumbai

IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification

Coarse and fine aggregate for Concrete for concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1000.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
5.3 (IS:2386(Pt.-1)_Flakiness Index)	1500.0
5.3 (Elongation Index)	1500.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0
12 (Organic Impurities)	1000.0
13 (IS 2386 (Part 5)_Soundness (Magnesium Sulphate))	2000.0
13 (Soundness (Sodium Sulphate)-IS 2386 (Part 5))	2000.0

1748

National Test House (WR), Mumbai

Custom specification for general chemical (WR) - Custom specification for general chemical (WR)

Custom specification for general chemical (WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification for general chemical (WR) (Please see Annexure)	5000.0

1749

National Test House (ER), Kolkata

CUSTOM/PP ROPE/2023 - CUSTOM/PP ROPE/2023

CUSTOM/PP ROPE/2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dia of Rope)	500.0
2.0 (Weight of Rope)	1000.0
3.0 (Breaking Strength of Individual Rope)	5000.0
4.0 (Size of Crate)	1000.0
5.0 (Size of Mesh Opening)	500.0
6.0 (Structure of Rope)	500.0
7.0 (Construction of Net)	500.0
8.0 (Size of Gabion)	500.0
9.0 (Linear Density of Rope)	1000.0
10.0 (Material of Rope)	5000.0
11 (Length of Lay)	1000.0
12 (Weight of Tar)	1200.0

1750

National Test House (ER), Kolkata

IS 4759 (1996) - Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Mass of Zinc Coating, (g/m2))	2000.0
9.3 (Determination of Uniformity of Galvanizing Coating)	1000.0

1751

National Test House (WR), Mumbai

Custom specification for metal (Chemical) WR - Custom specification for metal (Chemical) WR

Custom specification for metal (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification for metal (Chemical) WR (Please see the annexure)	5000.0

1752

National Test House (ER), Kolkata

RDSO/2009/CG-03 (2016) - Schedule of Technical Requirements for Injection Moulded Polyacetal Protective Tube for ICF Type B.G. Main Line & EMU Trailer Coaches (Tentative).

Schedule of Technical Requirements for Injection Moulded Polyacetal Protective Tube for ICF Type B.G. Main Line & EMU Trailer Coaches (Tentative).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Specific Gravity)	1000.0
5.1 (Tensile Strength)	2000.0
5.1 (Elongation at Break)	1000.0
5.1 (Melt Flow Rate @ 190 deg.C at 2.16 kg load)	2000.0

1753

National Test House (WR), Mumbai

Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement - Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement

Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (CARBON)	1200.0
2 (SULPHUR)	1200.0
3 (PHOSPHOROUS)	1200.0
4 (SULPHUR & PHOSPHOROUS)	1200.0
5 (CARBON EQUIVALENT)	1200.0

1754

National Test House (SR), Chennai

IS 1367 : Part 6 (2018) - Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1755

National Test House (SR), Chennai

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Test)	2000.0
7 (Proof Load)	3000.0
6 (Chemical composition, % by mass)	2500.0
7, Table 6 (Rockwell hardness, HRC)	2000.0

1756

National Test House (NER), Guwahati

IS 13801 (2013) - Chequered Cement Concrete Tiles -

Chequered Cement Concrete Tiles -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.6 (Resistance to wear)	2000.0
12.5 (Wet transverse strength)	2000.0
12.4 (Water Absorption)	1000.0
7 (Dimension: Thickness)	1000.0
7.1,Table 1,Column 3 (Dimension-Breadth(IS 13801:2013))	-
7.1,Table 1,Column 2 (Dimensions -Length)	300.0
10 (General Quality)	100.0
8.3 (Thickness of Wearing Layer)	500.0
12.3 (Straightness)	500.0
12.2 (Perpendicularity)	500.0
12.1 (Flatness)	500.0

1757

National Test House (WR), Mumbai

Custom Specification for Sand (Chemical) WR - Custom Specification for Sand (Chemical) WR

Custom Specification for Sand (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annexure (Please see the Annexure)	5000.0

1758

National Test House (NWR), Jaipur

IEC 60099 - 4 (2014) - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.13 (Seal Leak Test)	10000.0

1759

National Test House (NER), Guwahati

Custom - WATER/ Effluent treatment plant Water/ Sewage water/Filter water/ Potable water/River water

WATER/ Effluent treatment plant Water/ Sewage water/Filter water/ Potable water/River water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Total suspended solids, mg/l)	1200.0
3 (Total Dissolved Solids, mg/l (IS 3025 part 16))	1200.0
4 (Biological Oxygen Demand, mg/l)	3000.0
6 (Total Alkalinity (as CaCO3), mg/l (IS 3025 (part 23)))	1200.0
5 (Chemical Oxygen Demand, mg/l)	2000.0
7 (pH Value)	1200.0
8 (Oil & grease, mg/l)	1200.0
7 (Faecal Coliform)	2000.0

1760

National Test House (NR), Ghaziabad

IS 4020(Parts 1 to 16):1998 RA 2018 - Door shutters-Methods of Tests

Door shutters-Methods of Tests

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2-2.1 (Dimension: Height(mm) (IS 4020 (part 2) : 1998))	250.0
2-2.2 (Dimension:Width (IS 4020 (part 2) : 1998))	250.0
2-2.3 (Diemension:Thickness (IS 4020 (part 2) : 1998))	250.0
10 (Slamming Test (IS 4020 (part 10) : 1998))	1000.0
8 (Shock resistance Test (IS 4020 (part 8) : 1998))	1500.0
7 (Edge Loading Test ( IS 4020 (part 7) : 1998))	1500.0

1761

National Test House (SR), Chennai

900173-Custom RO Salt (2023) - Customer Requirement on RO Salt Sample Analysis

Customer Requirement on RO Salt Sample Analysis

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (a) (Loss on Ignition (at 450 deg C) after 1 hour)	1200.0
1 (b) (Colour (after LoI at 450 deg C for 1 hour))	1200.0
2 (a) (Loss on Ignition (at 450 deg C) after 2 hours)	1200.0
2 (b) (Colour (after LoI at 450 deg C for 2 hours))	1200.0

1762

National Test House (SR), Chennai

Relevant Standards (2023) - Custom Tests Aluminium Composite

Custom Tests Aluminium Composite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Weight (as such))	1000.0
2 (Dimension, Panel Width, mm)	500.0
3 (Dimension Panel Length, mm)	500.0
4 (Panel Thickness, mm)	1000.0
5 (Density at 27degC, g/cc)	1000.0
6 (Tensile Strength, kg/sq.mm)	1000.0
7 (Tensile Yield Strength, kg/sq.mm)	500.0
8 (Elongation, %)	500.0
9 (Flexural Strength, Kg/sq.mm)	2000.0
10 (Compressive Strength, MPa)	2000.0
11 (Water Absorption, %)	1000.0

1763

National Test House (SR), Chennai

DIN EN 12467 (July 2018) - Fibre-Cement Flat Sheets-Product specification and test methods

Fibre-Cement Flat Sheets-Product specification and test methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.2 (Appearance & finish)	2000.0
5.2 (Classification)	2000.0
5.3.2 (Dimension : Nominal length)	1000.0
5.3.2 (Dimension : Nominal Width)	1000.0
5.3.3 (Dimension : Thickness)	1000.0
5.3.5.1 (Shape-Straightness of edges)	1000.0
5.3.5.2 (Shape-Squareness of edges)	1000.0
5.4.2 (Apparent density)	1000.0
5.4.3 (Moisture movement)	3000.0
5.4.4 (Mechanical characteristics-Bending strength(MOR))	4000.0
5.4.4 (Mechanical Characteristics-Modulus of elasticity(MOE))	4000.0
5.4.5 (Water impermeability)	4000.0
5.5.2 (Freeze-thaw)	25000.0
5.5.3 (Heat-rain)	100000.0
5.5.4 (Warm water)	25000.0
5.5.5 (Soak-dry)	25000.0

1764

National Test House (NR), Ghaziabad

IS 2645:2003 (RA 2017) - Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification

Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4 (Chloride content)	2000.0
- (pH)	1000.0

1765

National Test House (ER), Kolkata

IS 613 (2000) - Copper Rods and Bars for Electrical Purposes

Copper Rods and Bars for Electrical Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (Resistance of a Solid Conductor)	5000.0
6 (Freedom from defects)	1000.0
9.1 (Tensile Strength)	2000.0
9.1 (Elongation)	1000.0
9 (Vickers Hardness)	2000.0
9.2 (Bend Test)	1000.0
10 (Dimensions)	1000.0
11 (Electrical Resistivity Test)	2000.0
8 (Chemical composition as given in for grades ETP, FRHC of IS 191 (Part 5) or IS 191 (Part 6) respectively.)	5000.0

1766

National Test House (ER), Kolkata

CUSTOM - Iron content in Mild Steel

Iron content in Mild Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Iron content)	2000.0

1767

National Test House (NWR), Jaipur

IS 1161 (2014) - Steel Tube for Structural Purposes

Steel Tube for Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Weight)	1000.0
6.1 (Thickness)	500.0
6.1 (Outside Diameter)	500.0
11.2 (Tensile Strength, MPa)	1000.0
11.2 (Yield strength, MPa)	1000.0
11.2 (Percent Elongation, %)	1000.0
11.3 (Cold Bend test)	-
11.3 (Bend Test / Flattening test)	1000.0
8 (Mass of Zinc Coating)	2000.0
0 (Uniformity of Coating)	1000.0

1768

National Test House (ER), Kolkata

ND Custom 9 (2023) - Training on Manual Metal Arc welding/ Gas Metal arc Welding

Training on Manual Metal Arc welding/ Gas Metal arc Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (One Day Training Programme on MMAW/GMAW)	1000.0
2 (Two Days Training Programme on MMAW/GMAW)	1000.0
3 (Three Days Training Programme on MMAW/GMAW)	3000.0
4 (Four Days Training Programme on MMAW/GMAW)	4000.0
5 (Five Days Training Programme on MMAW/GMAW)	5000.0

1769

National Test House (WR), Mumbai

IS 14948 : 2001 (2001) - PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION

PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION (Please refer annexure for tests result)	45000.0

1770

National Test House (WR), Mumbai

IS 16943 : 2019 (2019) - TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION

TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION (Please refer annexure for test result)	30000.0