NTH - Management Information System

Search by Standard No.

Reset

4135 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1441

National Test House (ER), Alipore

IS 2932 (2013) - Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing

Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1442

National Test House (ER), Alipore

SLS 1126.1-2020 - Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4.2,9.10 (Cranking performance for dry charge batteries)	15000.0
9.1 (1st 20 h capacity Test)	25000.0
9.2 (1st Reserve Capacity Test)	20000.0
9.3.1 (cranking performance test)	20000.0
9.6.1.1 (Corrosion Test)	15000.0
9.6.2 (Endurance in cycle test)	45000.0
9.5 (charge retention test)	20000.0
9.4 (Charge Acceptance Test)	15000.0
9.9 (Electrolyte Retention Test)	10000.0
9.8 (Vibration Resistance Test)	15000.0
9.7 (Water consumption Test)	15000.0
9.6.1.2 (Endurance in cycle test)	55000.0
9.1 (2nd 20 h capacity Test)	25000.0
9.2 (2nd Reserve Capacity Test)	20000.0
9.1 (3rd 20 h capacity Test)	25000.0
9.2 (3rd Reserve Capacity Test)	20000.0
8.2 (Initial charge prior to test)	12000.0

1443

National Test House (ER), Alipore

JIS D 5302-2004 - Lead Acid Batteries for Motorcycles

Lead Acid Batteries for Motorcycles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3.2 (Capacity (10 hour rate))	25000.0
8.3.3 (High Rate Discharge test)	15000.0
8.3.4 (Vibration resistance)	20000.0
Reference 1 (Deep Cycle Endurance)	60000.0
Reference 2 (Shallow Cycle Endurance)	60000.0
Reference 4 (Charge Retention test)	20000.0
Reference 3 (Characteristics of Electrolyte Decrease)	30000.0

1444

National Test House (ER), Alipore

IS 1652 (2013) - Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Verification of Constructional Requirements)	5000.0
7 (Verification of Marking)	2000.0
6.1 (Verification of Dimensions)	3000.0
10.6 (Test for Capacity)	25000.0
10.11 (Test for Voltage during Discharge)	10000.0
10.10 (Ampere-hour and watt hour efficiency test)	10000.0
10.8 (Test for loss of Capacity on Storage)	10000.0
10.9 (Endurance Test)	90000.0
10.12 (Loss of water test)	10000.0
10.13 (Test for suitability of floating battery operation)	10000.0
10.14 (Short circuit & Internal Resistance Test)	15000.0
- (Witness for Endurance Test)	13000.0

1445

National Test House (NWR), Jaipur

BSEN 13348 (2016) - Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum

Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Tensile Strength)	2000.0
6.2 (Elongation)	1000.0
3.1 (Copper (% by mass))	500.0
6.1 (Phosphorus (% by mass))	1000.0
6.1 (Chemical Composition (% by mass))	2000.0
6.2 (Hardness)	2000.0
8.6 (Drift Expansion test)	2000.0
6.3 (Dimension - Outer Diameter mm, in accordanc e with BS EN 13348 (2016) Table 2, 3 and 4)	1000.0
6.3 (Dimension - Thickness of the Tube in mm in accordance with BS EN 13348(2016) Table 2, 3 and 4)	1000.0
8.5 (Bending Test)	1000.0
6.1 (Cu + Ag)	4000.0

1446

National Test House (ER), Alipore

IS 13369 (1992) - Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2 (Verification of Constructional Requirements)	20000.0
11.3 (Verification of Marking)	1000.0
11.4 (Verification of Dimensions)	1000.0
11.5 (Test for Capacity)	20000.0
11.8 (Ampere-hour and watt hour efficiency test)	10000.0
11.6 (Test for loss of Capacity on Storage)	10000.0
11.7 (Endurance Test)	45000.0
11.9 (Water loss test)	10000.0
11.1 (Equilibrium Float current test)	10000.0
11.5 (Test for Capacity at -13 deg C to -15 deg C)	20000.0

1447

National Test House (ER), Alipore

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) [1100 kVA to 2 500 kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	20000.0
21.3(b) (Temperatur Rise Test)	40000.0
21.2(g) (Separate Source AC voltage withstand test)	2500.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and,check ofvoltage vector relationship)	2000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	20000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1500.0
21.2(c) (Measurement of impedance voltage (principal tapping), shortcurcuit impedance and load loss (At 50% and 100% load))	8000.0
21.2(d) (Measurement of no Load and loss and current)	6000.0
21.2(f) (lnduced Over Voltage withstand test)	4000.0
21.4(a) (Determination of sound levels)	7000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.5.1.121.5.2.121.5.3.1 (Air Pressure (Type test)-Deflection)	20000.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	20000.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	5000.0
As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current)	15000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	5000.0
N.A. (Unbalance Current)	5000.0

1448

National Test House (ER), Alipore

Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore

Customer Specification NTH ER Electrical Alipore

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Customer Specification NTH ER Electrical Alipore)	5000.0
2 (Customer Specification NTH ER Electrical Alipore)	10000.0
3 (Customer Specification NTH ER Electrical Alipore)	15000.0
4 (Customer Specification NTH ER Electrical Alipore)	20000.0
5 (Customer Specification NTH ER Electrical Alipore)	25000.0
6 (Customer Specification NTH ER Electrical Alipore)	30000.0
7 (Customer Specification NTH ER Electrical Alipore)	35000.0
8 (Customer Specification NTH ER Electrical Alipore)	40000.0
9 (Customer Specification NTH ER Electrical Alipore)	45000.0
10 (Customer Specification NTH ER Electrical Alipore)	50000.0
11 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	55000.0
12 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	60000.0
13 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	65000.0
14 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	70000.0
15 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	75000.0
16 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	80000.0
17 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	85000.0
18 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	90000.0
19 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	95000.0
20 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	100000.0
21 (Customer Specification NTH ER Electrical Alipore)	110000.0
22 (Customer Specification NTH ER Electrical Alipore)	120000.0
23 (Customer Specification NTH ER Electrical Alipore)	130000.0
24 (Customer Specification NTH ER Electrical Alipore)	140000.0
25 (Customer Specification NTH ER Electrical Alipore)	150000.0
26 (Customer Specification NTH ER Electrical Alipore)	160000.0
27 (Customer Specification NTH ER Electrical Alipore)	170000.0
28 (Customer Specification NTH ER Electrical Alipore)	180000.0
29 (Customer Specification NTH ER Electrical Alipore)	190000.0
30 (Customer Specification NTH ER Electrical Alipore)	200000.0

1449

National Test House (ER), Alipore

IS 1651 (2013) - Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.2 (Verification of Constructional Requirements)	5000.0
12.3 (Verification of Marking)	2000.0
12.4 (Verification of Dimensions)	3000.0
12.5 (Capacity)	25000.0
12.10 (Test for Voltage during Discharge)	10000.0
12.9 (Ampere-hour and watt hour efficiency test)	10000.0
12.7 (Test for loss of Capacity on Storage)	10000.0
12.8 (Endurance Test)	90000.0
12.11 (Water loss test)	10000.0
12.12 (Test for suitability of floating battery operation)	10000.0
12.13 (Short circuit & Internal Resistance Test)	15000.0
12.13 (Short circuit & Internal Resistance Test(Current more than 1000 Amps))	15000.0

1450

National Test House (ER), Kolkata

CUSTOM - COPPER ALLOY

COPPER ALLOY

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Copper, percent by mass)	1200.0
2 (Lead, Percent by mass)	1200.0
3 (Zinc)	1200.0

1451

National Test House (NR), Ghaziabad

RDSO Specification No. SPEC/E-7/17 (Rev.1) (2004) - Glass Banding Tape

Glass Banding Tape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. 8.14 (Humidity Resistance Test)	3000.0
8.15 (Saline Water Resistance Test)	10000.0
8.16 (Cross Breaking Strength @R/T)	2000.0
8.16 (Cross Breaking Strength after boiling in water for 14 days)	10000.0
8.12.4 (Breaking Load @150°C after heat ageing after 48 hrs)	3000.0
8.12.4 (Breaking Load @150°C after heat ageing after 96 hrs)	3000.0
8.12.4 (Breaking Load @150°C after heat ageing after 144 hrs)	3000.0
8.12.4 (Breaking Load @150°C after heat ageing after 192 hrs)	3000.0
8.12.4 (Breaking Load @150°C after heat ageing after 240 hrs)	3000.0

1452

National Test House (WR), Mumbai

Customized Specification for Nylon PA 66 Roller(Finish Material) - Nylon PA 66 Roller(Finish Material)

Nylon PA 66 Roller(Finish Material)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Density as per ASTM D 792)	1000.0
- (Shore D hardness as per ASTM D 2240)	1000.0
- (Water absorption as per ASTM D 570 for 24 hours)	2000.0
- (Base material identification by FTIR method)	2000.0

1453

National Test House (ER), Kolkata

Portable LED Light Tower - Portable LED Light Tower

Portable LED Light Tower

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A (Dimensions)	5000.0
B (Telescopic Tower Mast Detail (Construction))	5000.0
C (LED Luminaire)	57000.0
D (Driver)	40000.0
E (General Set Up Parameters)	10000.0
F (Photometric Parameters of System)	10000.0
G (Accessories and Packing)	2000.0
H (Genset Details)	35000.0

1454

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/PCN/120-2011 (Revision –1) (2011) - SPECIFICATION FOR ENAMEL, INTERIOR (a) UNDERCOATING (b) FINISHING WITH FIRE RETARDANT PROPERTIES

SPECIFICATION FOR ENAMEL, INTERIOR (a) UNDERCOATING (b) FINISHING WITH FIRE RETARDANT PROPERTIES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table No. 1 Sr. No. 15 (Fire retardant properties (Annexure A of RDSO SPECIFICATION No. M&C/PCN/120-2011 (Revision –1)))	2000.0

1455

National Test House (NR), Ghaziabad

IS 1576 (1992) - SOLID PRESSBOARD FOR ELECTRICAL PURPOSES — SPECIFICATION

SOLID PRESSBOARD FOR ELECTRICAL PURPOSES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Thickness)	1000.0
5.3 (Finish)	1000.0
5.4 (Density)	1000.0
5.6 (Tensile Strength, MD)	1000.0
5.6 (Tensile Strength, CD)	1000.0
5.7 (Compressibility)	3000.0
5.8 (Shrinkage)	3000.0
5.9 (Flexibility)	2000.0
5.11 (Oil Absorption)	2000.0
5.12 (Machinability)	2000.0
5.13 (Conductivity of Aqueous Extract, micro mhos/cm)	1000.0
5.14 (pH Values of Aqueous Extract)	1000.0
5.15 (Moisture Content)	1000.0
5.16 (Mineral Ash)	2000.0

1456

National Test House (NR), Ghaziabad

IS 9335 (Part 2) (1998) - Cellulose Papers of Electrical Purposes - Test Methods

Cellulose Papers of Electrical Purposes - Test Methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Thickness)	1000.0
3 (Substance (Grammage))	1000.0
4 (Apparent Density)	1000.0
5 (Tensile Strength, MD)	1000.0
5 (Tensile Strength, CD)	1000.0
5 (Elongation, MD)	500.0
5 (Elongation, CD)	500.0
6 (Internal Tearing Resistance, MD)	1000.0
6 (Internal Tearing Resistance, CD)	1000.0
10 (Moisture Content)	1000.0
11 (Ash Content)	2000.0
12 (Conductivity of Aqueous Extract)	1000.0
13 (pH of aqueous extract)	1000.0
21 (Electric Strength)	10000.0

1457

National Test House (NR), Ghaziabad

IS 4253 (Part 2) (2008) - CORK COMPOSITION SHEETS - SPECIFICATION

CORK COMPOSITION SHEETS - SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Dimensions)	1000.0
8.3 (Dimensional Stability)	5000.0
8.4 (Tensile Strength)	2000.0
8.5 (Compressibility and Recovery)	3000.0
8.8 (Fluid Resistance Test)	4000.0
8.9 (Chemical Test on Water Extract)	5000.0
Table 1(i) (Hardness, IRHD)	1000.0
8.6 (Compression Set)	3000.0

1458

National Test House (ER), Kolkata

Custom Mechanical Gauges-Dimension - Custom Mechanical Gauges dimension as per drg.

Custom Mechanical Gauges dimension as per drg.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimensions as per customer request)	2000.0

1459

National Test House (WR), Mumbai

IS 1969(P-1):2019 - Fabric

Fabric

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Breaking Strength of Fabric (Ravelled Strip 5x20 cm.) Length wise)	1000.0
- (Elongation at Break Length wise)	1000.0

1460

National Test House (NR), Ghaziabad

IS 14490 (2024) - Plain Copier Paper — Specification

Plain Copier Paper — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Moisture Content)	1000.0
5.3 (Grammage (Substance))	1000.0
5.4 (Thickness)	1000.0
Table 1(i) (Brightness (ISO))	2000.0
Table 1(ii) (Opacity)	2000.0
Table 1(iii) (One minute cobb test)	2000.0
Table 1(iv) (Wax Pick (Surface Strength))	2000.0
Table 1(v) (Smoothness (Bendsten))	1000.0
Table 1(vii-a) (Taber Stiffness, MD)	500.0
Table 1(vii-b) (Taber Stiffness, CD)	500.0
Table 1(viii-a) (Tear Index, MD)	1000.0
Table 1(viii-b) (Tear Index, CD)	1000.0
Table 1(ix-a) (Tensile Index, MD)	1000.0
Table 1(ix-b) (Tensile Index, CD)	1000.0
Table-1(vi) (Ash Content (at 900°C))	2000.0
5.1 (General)	500.0
5.5 (Size)	500.0

1461

National Test House (NR), Ghaziabad

IS 14490 (2018) - Plain copier paper - Specification (First Revision)

Plain copier paper - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1462

National Test House (NR), Ghaziabad

RDSO Specification- TI/SPC/OHE/WR/1060 (2006) - SPECIFICATION FOR STANLESS STEEL WIRE ROPES

SPECIFICATION FOR STANLESS STEEL WIRE ROPES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.5 (Tensile test on wire)	3000.0
12.6 (Breaking force test on rope)	3000.0
12.6 (One minute withstand test on rope)	3000.0

1463

National Test House (NR), Ghaziabad

2141 (2000) - HOT DIP GALVANIZED STAY STRAND

HOT DIP GALVANIZED STAY STRAND

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Breaking force of single wire)	3000.0
6.2 (Breaking force of Strand)	3000.0
9.1 (Tensile Test of Strand)	2000.0
9.1 (Elongation)	1000.0
8.1 (Wrapping Test)	1000.0

1464

National Test House (ER), Kolkata

CUSTOM/COMPOSITE STRAP/2024 - CUSTOM/COMPOSITE STRAP/2024

CUSTOM/COMPOSITE STRAP/2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Tensile Strength)	2000.0
2.0 (Elongation)	1000.0
3.0 (System Breaking Strength (Strap + Buckles))	2000.0
4.0 (Width of the Strap)	1000.0
5.0 (Thickness of the Strap)	1000.0
6.0 (Linear Breaking Strength)	2000.0
Firm's request (Breaking Strength)	2000.0

1465

National Test House (NR), Ghaziabad

NTH/NR/XR/2024/EPS Foam (2024) - EPS Foam

EPS Foam

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Tensile Strength)	3000.0
Firm's Requirement (Compression Strength)	2000.0
Firm's Req. (GSM of Polyfill)	1000.0

1466

National Test House (NWR), Jaipur

Custom specification NWR for Paints - Methods of test for paints, varnishes and related products as per IS 101

Methods of test for paints, varnishes and related products as per IS 101

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Salt Spray Test)	2000.0
1 (Drying Time)	2000.0
3 (Consistency (Flow cup method))	2000.0
1 (Dry Film Thickness(DFT) in Microns)	1000.0

1467

National Test House (NR), Ghaziabad

IS 578:1985 (1985) - Full Chrome Upper Leather-Specification

Full Chrome Upper Leather-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 (Crackiness of the Grain)	1000.0
Table 1 (Tensile Strength)	2000.0
Table 1 (Tensile Elongation @1kgf/mm^2 after 15 min.)	2000.0
Table 1 (Tearing Strength)	2000.0
Table 1 (Flexural Endurance)	3000.0
Table 1 (Color Fastness to Rubbing)	2000.0
Table 2 (Solvent extractable substances)	1000.0
Table 2 (Chromium Content)	1000.0
Table 2 (pH of Water Soluble)	1000.0
Table 2 (Bound Organic Matter)	1000.0
Firm's Requirement (Thickness of Leather)	1000.0
Firm's Requirement (Double Hole Stitch Tear Strength)	1000.0
Firm's Requirement (Shrinkage Temperature)	1000.0

1468

National Test House (WR), Mumbai

IS 456:2000 - PLAIN AND REINFORCED CONCRETE -CODE OF PRACTICE

PLAIN AND REINFORCED CONCRETE -CODE OF PRACTICE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1469

National Test House (WR), Mumbai

IS 456-II (2000) - Plain and Reinforced Concrete - CONCRETE CHEMICAL [Custom]

Plain and Reinforced Concrete - CONCRETE CHEMICAL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1470

National Test House (ER), Kolkata

1264:1997 - Brass Gravity Die Castings

Brass Gravity Die Castings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Copper)	1200.0
7.1 (Tin)	1200.0
7.1 (Lead)	1200.0
7.1 (Nickel)	1200.0
7.1 (Iron)	1200.0
7.1 (Aluminium)	1200.0
7.1 (Manganese)	1200.0
7.1 (Silicon)	1200.0