NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1471

National Test House (NWR), Jaipur

IEC 60099-4:2014 (2014) - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.16.2 (Bending Moment)	20000.0
8.9.4.3 (Tensile Load Test (Pull Test))	20000.0
8.11 & 8.11.4.1 (Bending Moment Test(Cantilever Strength Test)/Mechanical Load Test/Breaking Load Test)	20000.0
8.11 & 8.11.4.2 (Electric Test/Leakage Check & Partial Discharge test)	20000.0

1472

National Test House (SR), Chennai

IS 4722 - ROTATING ELECTRICAL MACHINES

ROTATING ELECTRICAL MACHINES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
30.2 (Insulation Résistance test before Dielectric test)	5000.0
30.1 (HV test at rated voltage plus 1kV)	3000.0
30.2.a (Insulation Résistance test after Dielectric test)	5000.0

1473

National Test House (NR), Ghaziabad

IS 245 - 2020 (2020) - TRICHLORO ETHYLENE TECHNICAL

TRICHLORO ETHYLENE TECHNICAL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Relative Density @ 27 Degree C)	2000.0
Cl 1 Table 1 (Residue on evaporation, mg/100 ml)	2000.0
Cl 1 Table 1 (Distillation yield between 86 and 88°C, the temperature being corrected for 760 mm Hg pressure)	2000.0
Cl 1 Table 1 (Alkalinity (as Na2CO3))	2000.0
Cl 1 Table 1 (Resistance to corrosion)	2000.0

1474

National Test House (ER), Kolkata

ASME BPVC Section V SE 165 - Standard Practice for Liquid Penetrant Examination for General Industry

Standard Practice for Liquid Penetrant Examination for General Industry

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Flaw detection by Liquid Penetrant Test)	1000.0

1475

National Test House (ER), Kolkata

ASME BPVC Section V SD 7091 - Standard practice for Non-destructive measurement of Dry Film Thickness of Non-magnetic Coating applied to ferrous metals and Non-magnetic, Non-conductive coating applied to Non-ferrous Metals

Standard practice for Non-destructive measurement of Dry Film Thickness of Non-magnetic Coating applied to ferrous metals and Non-magnetic, Non-conductive coating applied to Non-ferrous Metals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dry Film Thickness)	2000.0

1476

National Test House (NR), Ghaziabad

IS 398 Part 2 (2025) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Direction of Lay)	1000.0
3.3 (Measurement of Diameter of individual Aluminum Wires)	3500.0
13.2 (Measurement of Diameter of Galvanized Steel Wires)	1000.0
13.3 (Breaking Load Test of Wire)	7000.0
13.4 (Ductility Test)	1000.0
13.5 (Wrapping Test for Aluminum Wire)	1000.0
13.5 (Wrapping Test for Galvanized Steel Wire)	1000.0
13.6 (Resistance Test)	2000.0
13.7 (Galvanizing Test)	2000.0
13.8 (Lay Ratio)	1000.0
7.1 (Freedom from defect)	1000.0
9.2.1 (Joints in Aluminium Stranded Wire)	1000.0
0 (Mechanical Test As per Annexure)	6000.0
0 (Resistance Test)	1000.0
0 (Mass of Zinc Coating)	1000.0

1477

National Test House (ER), Kolkata

IS 13043 (1991) - Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficien

Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficien

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Metal Recovery Test-Effective Electrode Efficiency)	3000.0

1478

National Test House (ER), Kolkata

IS 11802 (1986) - Methods for determination of diffusible hydrogen content of deposited weld metal from covered electrodes in welding mild and low alloy steels

Methods for determination of diffusible hydrogen content of deposited weld metal from covered electrodes in welding mild and low alloy steels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Volume of diffusible hydrogen)	5000.0

1479

National Test House (NER), Guwahati

IRS-GE-I, JUNE-2016 (2016) - SPECIFICATIONS FOR TRACK BALLAST

SPECIFICATIONS FOR TRACK BALLAST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.3 (Size and Gradation (IRS-GE-I, JUNE-2016))	2000.0
2.2.3 (Water absorption (IS 2386 (Part III):1963))	1000.0
2.2.1 (Aggregate abrasion value-Annexure I of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963)	1500.0
2.2.2 (Aggregate Impact Value-Annexure II of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963)	1500.0

1480

National Test House (ER), Kolkata

IS 1608 (Part1): 2022 - Metallic Materials-Tensile Testing-Method of Test at Room Temperature

Metallic Materials-Tensile Testing-Method of Test at Room Temperature

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tensile Testing)	5000.0

1481

National Test House (ER), Kolkata

IS 1757 (PART 1): 2020 - Metallic Materials Charpy Pendulum Impact Test Part 1 Test Method

Metallic Materials Charpy Pendulum Impact Test Part 1 Test Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Charpy Impact Test)	3000.0
2 (Charpy Impact Test)	5000.0

1482

National Test House (ER), Kolkata

IS 1757 Part 1 (2020) - Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )

Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Impact Test with sample preparation)	5000.0
9 (Impact Test without sample preparation)	4000.0

1483

National Test House (ER), Kolkata

IS 3600 : Part 5 (2018) - Method of testing fusion welded joints and weld metal in steel: Part 5 destructive tests on welds in metallic materials - Bend tests (Third Revision)

Method of testing fusion welded joints and weld metal in steel: Part 5 destructive tests on welds in metallic materials - Bend tests (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (TRANSVERSE ROOT or FACE BEND TEST)	1000.0

1484

National Test House (ER), Kolkata

IS 3848:1981 - Method for end quench test for hardenability of steel (First Revision)

Method for end quench test for hardenability of steel (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardenability Test)	8000.0

1485

National Test House (NR), Ghaziabad

IS 2347 (2023) - Domestic pressure cooker - Specification (Sixth Revision)

Domestic pressure cooker - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Capacity)	500.0
8.1 (Air Pressure of domestic pressure cooker)	1000.0
8.2 (Proof Pressure of domestic pressure cooker)	2000.0
8.3 (Operating pressure for Pressure Regulating Device)	1000.0
8.4.1 Annex-H cl. No. H-1.1 (Operating pressure of Safety Pressure Relief Device for destructible device)	1000.0
8.6.1 (Removal of Lid under Pressure (For Outer Lid Cooker))	1000.0
8.6.2 (Removal of Lid under Pressure (For Inner Lid Cooker))	1000.0
8.5 (Bursting Pressure Test)	3000.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for body)	2000.0
5.1 (Chemical Composition, % by mass.)	6000.0
0 (Test Result as per Annexure.)	20000.0

1486

National Test House (ER), Kolkata

IS 6416:2022 - Methods for Measuring Case Depth of Steel

Methods for Measuring Case Depth of Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Case Depth of Steel by Macrostructure Method)	3000.0
8 (Case Depth of Steel by Microstructure Method)	3000.0

1487

National Test House (ER), Kolkata

ASTM E114-20 - Standard Practice for Ultrasonic Pulse-Echo Straight Beam Contact Testing

Standard Practice for Ultrasonic Pulse-Echo Straight Beam Contact Testing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ultrasonic Pulse-Echo Straight Beam Contact Testing)	1000.0

1488

National Test House (ER), Kolkata

ASTM E164-19 - Standard Practice for Contact Ultrasonic Testing of Weldments

Standard Practice for Contact Ultrasonic Testing of Weldments

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ultrasonic Testing of Weldments)	1000.0

1489

National Test House (ER), Kolkata

ASTM E 94-17 - Standard Guide for Radiographic Examination using Industrial Radiographic Film

Standard Guide for Radiographic Examination using Industrial Radiographic Film

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Radiographic Examination using Industrial Radiographic Film)	1000.0

1490

National Test House (ER), Kolkata

ASTM E1032-19 - Standard Practice for Radiographic Examination of Weldments using Industrial X-Ray Film

Standard Practice for Radiographic Examination of Weldments using Industrial X-Ray Film

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Radiographic Examination of Weldments)	1000.0

1491

National Test House (ER), Kolkata

ASTM E1030-15 - Standard Practice for Radiographic Examination of Metallic Castings

Standard Practice for Radiographic Examination of Metallic Castings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Radiographic Examination of Metallic Castings)	1000.0

1492

National Test House (ER), Kolkata

IS 3664:1981 - Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision)

Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ultrasonic Pulse Echo Testing by Contact Method)	1000.0

1493

National Test House (ER), Kolkata

ASTM E709-15 - Standard Guide for Magnetic Particle Testing

Standard Guide for Magnetic Particle Testing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Magnetic Particle Testing)	1000.0

1494

National Test House (ER), Kolkata

ASTM E112-13 - Standard Test Method for Determining Average Grain Size

Standard Test Method for Determining Average Grain Size

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Determining Average Grain Size)	3000.0

1495

National Test House (ER), Kolkata

IS 7754 (Part 1) (2022) - Microstructure of Cast Iron-Graphite Classification by visual analysis

Microstructure of Cast Iron-Graphite Classification by visual analysis

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Determination of Graphite Shape and Distribution)	3000.0

1496

National Test House (ER), Kolkata

IS 7754 (2022) - Microstructure of Cast Iron-Graphite Classification by Visual analysis

Microstructure of Cast Iron-Graphite Classification by Visual analysis

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Microstructure of Graphite in Cast Iron)	3000.0

1497

National Test House (SR), Chennai

IS:16353-2015 -CLINKER - PORTLAND CEMENT CLINKER

PORTLAND CEMENT CLINKER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
custom (Compressive strength- 24±1h[on the lines of IS 4031(6)])	1000.0
6.1-Table 2 (Compressive strength-72±1h[ IS 4031(6)])	1000.0
6.1-Table 2 (Compressive strength-168±2h[ IS 4031(6)])	1000.0
6.1-Table 2 (Compressive strength-672±4h[ IS 4031(6)])	1000.0
custom (Consistency[IS 4031(4)])	500.0
Table 1 Cl 5 (Ratio of percentage of Alumina to that of Iron Oxide)	1000.0
Table 1 Cl 5 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	1000.0
Table 1 Cl 5 (Total sulphur content calculated as sulphuric anhydride (SO3))	500.0
Table 1 Cl 5 (Free lime, percent by mass,)	1500.0
Table 1 Cl 5 (Chloride content, percent by mass,)	200.0
Table 1 Cl 5 (Magnesia (as MgO), percent by mass)	1500.0
Table 1 Cl 5 (Insoluble residue, percent by mass)	500.0
Table 1 Cl 5 (Total loss on ignition , Percent by mass)	500.0
Table 1 Cl 5 (Silica (as SiO2), Percent by mass)	500.0
Table 1 Cl 5 (Aluminium Oxide (as Al2O3), Percent by mass)	500.0
Table 1 Cl 5 (Iron Oxide (as Fe2O3), Percent by mass)	500.0
Table 1 Cl 5 (Alkali content (as Na2O), percent by mass)	500.0
Table 1 Cl 5 (Alkali Content (as K2O). Percent by mass)	500.0
Table 1 Cl 5 (Calcium Oxide (as CaO), Percent by mass)	1000.0
6.1 (Fineness: [IS 4031(2)])	1000.0
6.1-Table 2 (Soundness-Le-Chatelier method :IS 4031(3))	500.0
6.1-Table 2 (Soundness-Autoclave method [IS 4031(3)])	1000.0
6.1-Table 2 (Setting Time-Initial setting time[IS 4031(5)])	500.0
6.1-Table 2 (Setting Time-Final setting time: [IS 4031(5)])	500.0

1498

National Test House (SR), Chennai

IS 16353 (2015) - Portland Cement Clinker - Specification

Portland Cement Clinker - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1499

National Test House (NER), Guwahati

IS 9103:1999 - CONCRETE ADMIXTURES - SPECIFICATION ( First Revision )

CONCRETE ADMIXTURES - SPECIFICATION ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1500

National Test House (NER), Guwahati

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103) (1991 RA 2018) - Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found