NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1411

National Test House (SR), Chennai

TI/SPC/OHE/CW/0971 - Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1.1 (Visual Examination)	1000.0
9.1.2 (Dimension)	2000.0
9.1.3 (Weight)	1500.0
9.1.4 (Resistance/km at 20 Deg. C)	3000.0
9.1.5 (Brinell Hardness)	2000.0
9.1.6 (Tensile Strength)	2000.0
9.1.7 (Elongation at Gauge Length 200 mm)	1000.0
9.1.8 (Bending Test)	1000.0
9.1.9 ((Cu+Ag))	2000.0
9.1.10 (Micro structure Examination)	3000.0

1412

National Test House (SR), Chennai

RDSO/TI/SPC/OHE/CAT(Cd-Cu)/0971 - Technical specification for Cadmium Copper for Overhead Electrical Traction-Cu-Cd

Technical specification for Cadmium Copper for Overhead Electrical Traction-Cu-Cd

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Chemical composition, percent by mass (Cu+Ag))	5000.0
8.2.1 (Visual examination)	1000.0
8.2.3 (Measurement of diameter of individual wires and stranded conductors, mm)	2000.0
8.2.4 (Measurement of weight of wire and conductor, kg/km)	1000.0
8.2.5 (Measurement of Lay length and lay ratio of each layer of stranded conductor)	3000.0
8.2.6 (Measurement of Electrical resistance of wire and stranded conductor)	5000.0
8.2.7 (Tensile test on wires -3 wires)	3000.0
8.2.7 (Tensile test on wires -7 wires)	3500.0
8.2.7 (Tensile test on wires -19 wires)	9500.0
8.2.7 (Tensile test on wires -37 wires)	18500.0
8.2.8 (Wrapping test on wires)	1000.0

1413

National Test House (ER), Kolkata

B269-000-02-42-PCS-0001 Rev. 3 (2021) - F-15 Two components Epoxy phenolic coating cured with polyamine adduct hardener EIL SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM

F-15 Two components Epoxy phenolic coating cured with polyamine adduct hardener EIL SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume solids %)	2000.0
2 (DFT per coat in microns)	500.0
3 (Theoretical covering capacity meter square/coat/litre)	500.0
4 (weight per litre of mix paint Kg/litre)	500.0
5 (Touch dry at 30 Deg C)	500.0
6 (Hard dry at 30Deg C)	500.0
7 (Full cure 30 Deg C(for immersion /high temp service))	500.0
8 (Over-coating interval)	1000.0
9 (Pot life at 30 Deg C(For two components paint))	1000.0
10 (Adhesion (ASTM D 4541) MPa)	3000.0
11 (Temperature Resistance at 150 Deg C Method A ASTM D 2485)	2500.0

1414

National Test House (NWR), Jaipur

IS 1500 : Part 2 (2021) - Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines

Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Hardness)	4000.0

1415

National Test House (NR), Ghaziabad

IS 8360:2022 (2022) - Fabricated Polyethylene Fittings for Water Supply — Specification

Fabricated Polyethylene Fittings for Water Supply — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Visual Appearance)	1000.0
7.1 (Outside Diameter)	1000.0
7.1 (Wall Thickness)	1000.0
7.2 (Laying Length)	1000.0
8.1 (Internal Pressure Creep Rupture Test)	5000.0
8.2 (Tensile Strength for Butt Fusion)	2000.0

1416

National Test House (NR), Ghaziabad

IS 8008:2022 (2022) - Injection Moulded/Machined Polyethylene Fittings for Water Supply — Specification

Injection Moulded/Machined Polyethylene Fittings for Water Supply — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Outside Diameter)	1000.0
8 (Visual Appearance)	1000.0
9.1 (Wall Thickness)	1000.0
10.1 (Internal Pressure Creep Rupture Test)	5000.0
10.2 (Carbon Black Content)	2000.0
10.2 (Carbon Black Dispersion)	1000.0
10.3 (Melt Flow Rate)	2000.0
10.4 (Density)	1000.0
10.5 (Oxidation Induction Time)	2000.0
10.6 (Overall Migration)	5000.0

1417

National Test House (NR), Ghaziabad

IEC 60099 - 4 (2014) - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.6 (Lighting Impulse Voltage Test)	50000.0
8.2.8 (Power Frequency Voltage Test (Wet))	20000.0

1418

National Test House (NR), Ghaziabad

IS/IEC 61439-1 (2020) - Low-voltage switchgear and controlgear assemblies Part 1: General rules

Low-voltage switchgear and controlgear assemblies Part 1: General rules

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl No. 10.10 (Temperature-rise)	30000.0

1419

National Test House (ER), Kolkata

EN 14399 Part-5 (2015) - High-strength structural bolting assemblies for Preloading –.Part 5: Plain washers

High-strength structural bolting assemblies for Preloading –.Part 5: Plain washers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Dimension)	2000.0
4 & Table-3 (Mechanical Properties Vickers Hardness)	2000.0
0 (Chemical Composition)	2000.0
4.0 (Zinc coating thickness as per ISO 10684)	2000.0

1420

National Test House (ER), Kolkata

EN 14399 : Part 9 (2009) - High-Strength Structural Bolting Assemblies For Preloading - Part 9: System HR Or HV - Direct Tension Indicators For Bolt And Nut Assemblies

High-Strength Structural Bolting Assemblies For Preloading - Part 9: System HR Or HV - Direct Tension Indicators For Bolt And Nut Assemblies

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Internal Diameter)	500.0
3.1 (Protrusion internal Diameter)	500.0
3.1 (Protrusion tangential Diameter)	500.0
3.1 (Height of Protrusion)	500.0
3.1 (Height over Protrusion)	500.0
3.1 (Material Thickness)	500.0
3.1 (External Diameter)	500.0
3.1 (Dimensions as per EN 14399 - 9.)	2500.0
3.2 (Mechanical Properties Vickers Hardness)	2000.0

1421

National Test House (SR), Chennai

IEC 62271-102:2018 (2018) - High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.106 (Mechanical Endurance Test M0 Class on DBCR Isolator (1000 Operation))	20000.0
7.5 (Temperature Rise Test as per IEC62271-102:2018)	20000.0
Cl.no 7.2.7.3 of IS/IEC 62271-102 (Lightning Impulse Voltage Dry Test)	50000.0
Cl.no 7.2.7.2 of IS/IEC 62271-102 (Power Frequency Voltage Dry Test)	2500.0
Cl.no 7.2.7.2 of IS/IEC 62271-102 (Power Frequency Voltage Wet Test)	2500.0

1422

National Test House (ER), Kolkata

IS 277 (2018) - Galvanized Steel Sheets (Plain and Corrugated)

Galvanized Steel Sheets (Plain and Corrugated)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Uniformity of Zinc Coating)	2000.0
14 ,15 (Dimensions)	1000.0
5.1 (Carbon, % by mass)	500.0
5.1 (Manganese, % by mass)	500.0
5.1 (Sulphur, % by mass)	500.0
5.1 (Phosphorous, % by mass)	500.0
8.1 (Tensile Strength)	2000.0
8.1 (Yield Stress)	1000.0
8.1 (Elongation Percent)	1000.0
8.2 (Bend Test)	1000.0
12 (Freedom from Defects)	1000.0
5.1 (Titanium)	500.0
7 (Mass of Zinc Coating)	2000.0
3.3 (Thickness of Sheet ( Base Matel))	1000.0
3.3 (Thickness of sheet (uncoated), mm)	1000.0

1423

National Test House (ER), Kolkata

IS 1891 : Part 1 (2021) - CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)

CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Construction)	1000.0
7.0 (Tensile Strength of Top Cover)	1000.0
7.0 (Tensile Strength of Bottom Cover)	1000.0
7.0 (Elongation at Break of Top Cover)	500.0
7.0 (Elongation at Break of Bottom Cover)	500.0
7.0 (Abrasion Loss of Top Cover)	1500.0
7.0 (Abrasion loss of Bottom Cover)	1500.0
8.0 (Freedom from Defects)	1000.0
14.0 (Width)	1000.0
14.0 (Cover Thickness)	1000.0
15.0 (Full Thickness Tensile Strength, Longitudinal Direction)	2500.0
15.0 (Full Thickness Tensile Strength, Transverse Direction)	2500.0
15.0 (Full Thickness Elongation at Break, Longitudinal Direction)	500.0
15.0 (Full Thickness Elongation at Break, Transverse Direction)	500.0
15.0 (Elongation at Reference Load, Longitudinal Direction)	1000.0
16.0 (Adhesion Strength Between Plies)	3000.0
16.0 (Adhesion Strength Between Cover and Carcass)	2000.0
Firm's request (Hardness (Shore A))	1000.0
Firm's request (Flammability Characteristics with Cover (ISO 340))	4000.0
Firm's request (Flammability Characteristics without Cover (ISO 340))	4000.0

1424

National Test House (WR), Mumbai

Customer Specification -Cable - Customer Specification -Cable

Customer Specification -Cable

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Type test for cable)	20000.0
- (Acceptance test-cable)	10000.0
- (Routine test-cable)	12000.0
4 (Acceptance Tests - AAAC/ACSR Conductors)	8000.0
5 (Acceptance Tests - ACSR Conductor-37 wire (Wolf, Panther) and other sizes)	10000.0
6 (Acceptance Tests - Insulators Discs/ Post/Pin (11/22/33kV))	8000.0
7 (Acceptance Tests - Insulators Shackle / Pin (0.4 kV))	6000.0
8 (Acceptance Tests- LT/HT Aerial Bunched Cables of various sizes)	8500.0
9 (Acceptance Tests- LT PVC cables of various size-1 Core)	8500.0
10 (Acceptance Tests- LT PVC cables of various size-2 Core)	12000.0
11 (Acceptance Tests- LT PVC cables of various size-3/3.5/4 Core)	14000.0
12 (Acceptance Tests- LT XLPE Cables of various sizes-1/2 core)	10000.0
13 (Acceptance Tests- LT XLPE Cables of various sizes-3/3.5/4 core)	12000.0
14 (Acceptance Tests- HT XLPE Cables of various sizes)	12000.0

1425

National Test House (WR), Mumbai

Customer specification-Functional tests - Customer specification-Functional tests

Customer specification-Functional tests

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Functional test, Operational test, Discrete test)	25000.0
Sl1 (Performance Tests)	50000.0
Sl2 (Operational Checks)	50000.0
Sl3 (Technical Analysis)	25000.0
Sl4 (Specs verification)	25000.0

1426

National Test House (SR), Chennai

CUS/SR/MECH-48 - Bi-Cycle - Girls

Bi-Cycle - Girls

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions and visual examination)	20000.0
2.0 (Chemical composition, % by mass)	5000.0

1427

National Test House (SR), Chennai

CUS/SR/MECH-47 - Bi-Cycle - Boys

Bi-Cycle - Boys

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions and visual examination)	20000.0
2.0 (Chemical composition, % by mass)	5000.0

1428

National Test House (SR), Chennai

IS 2386 (Part I) (1963) - Method of Test for Aggregates for Concrete Part I Particle Size and Shape

Method of Test for Aggregates for Concrete Part I Particle Size and Shape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.4.1 (Dimension calibration of thickness gauge)	4000.0
5.4.1 (Dimension calibration of length gauge)	4000.0
1 ()	-

1429

National Test House (SR), Chennai

IS 2386 : Part 1 (1963) - Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape

Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

1430

National Test House (SR), Chennai

IEC 60840 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV)

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Acceptance tests as per IEC 60840)	37500.0

1431

National Test House (NR), Ghaziabad

IRSM 46 (2020) - Filler Wire for MIG/MAG Welding

Filler Wire for MIG/MAG Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Testing of Welding Electrode)	17000.0
- (Chemical Composition)	3000.0

1432

National Test House (WR), Mumbai

ILC for HDPE pipes NTH/NR/XR/ILC/2024/13 - ILC for HDPE Pipes

ILC for HDPE Pipes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Melt Flow Index as per IS 2530)	-
- (Density as per IS 7328)	-
- (Thickness as per IS 4984:2016)	-
- (Elongation as per annexure "H" of IS 4984)	-
- (Carbon Black Content as per IS 2530)	-

1433

National Test House (WR), Mumbai

ILC for PVC Pipe NTH/NR/XR/ILC/2024/12 - ILC for PVC Pipes

ILC for PVC Pipes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Ash Content as per IS 4985:2021)	-
- (Density as per IS 12235)	-
- (Vicat Softening Point as per IS 4985:2021)	-
- (Opacity as per IS 4985:2021)	-

1434

National Test House (WR), Mumbai

PT Programme no. PTP/03/2023 for Paper - PT Programme no. PTP/03/2023 for Paper

PT Programme no. PTP/03/2023 for Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Ash at 900°C)	-
- (pH)	-
- (Smoothness (Bendtsen))	-
- (Substance)	-
- (Thickness)	-
- (Brightness)	-
- (Opacity)	-
- (Burst Index)	-
- (Tensile Index)	-

1435

National Test House (NR), Ghaziabad

DGS 8863A (1962) - Specification for Mineral Fiber Resin Bounded Slabs

Specification for Mineral Fiber Resin Bounded Slabs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
d(i) (Alkalinity (as Sodium Oxide))	1000.0
d(ii) (Shot Content)	2000.0
d(iii) (Water Absorption)	2000.0
d(iv) (Fire Resistance)	8000.0
d(v) (Resin Content)	2000.0

1436

National Test House (NER), Guwahati

1708 (1986) - Testing of Small Specimen of Timber

Testing of Small Specimen of Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 1 (Moisture Content, in %)	1000.0
Part 2 (Specific Gravity /Density, g/cm3)	500.0

1437

National Test House (ER), Kolkata

CUSTOM - Grease

Grease

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Consistency of the grease at 25±0.5°C, Unworked penetration)	1200.0
2 (Consistency of the grease at 25±0.5°C: 60 strokes)	1200.0
3 (Free alkalinity, percent by mass)	1200.0

1438

National Test House (ER), Kolkata

CUSTOM - GOLD CONTENT (% by mass)

GOLD CONTENT (% by mass)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Gold % by mass)	2000.0

1439

National Test House (SR), Chennai

IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification

Coarse and fine aggregate for Concrete for concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0

1440

National Test House (ER), Kolkata

IS 9537 ( Part 3) (1983) - Specification for conduits for electrical installations ( Part 3) rigid plain conduits of insulating materials.

Specification for conduits for electrical installations ( Part 3) rigid plain conduits of insulating materials.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.0 (Dimensions)	1000.0
8.0 (Construction)	1000.0
9.3 (Compression Test)	2000.0
11.0 (Resistance to Burning)	5000.0
6.2 (Durability of Marking)	1000.0
7.4 (Uniformity of Wall Thickness)	1000.0
9.4 (Impact Test)	2000.0
10.0 (Resistance to heat)	2000.0