NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1501

National Test House (NER), Guwahati

IS 1237 (2012) - Cement Concrete Flooring Tiles - Specification

Cement Concrete Flooring Tiles - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.6 (Wet transverse strength-Annex F of IS 1237:2012)	2000.0
12.5 (Water Absorption-Annex E of IS 1237:2012)	1000.0
10 (General Quality-IS 1237:2012)	100.0
12.7 (Resistance to wear-Annex G of IS 1237:2012)	2500.0
8.3 & Table2 (The thickness of Wearing Layer-IS 1237:2012)	100.0
7, 8.2 & Table1 (Thickness & Tolerances-IS 1237:2012)	100.0
7 & 8.1, Table1 (Dimensions & Tolerances-IS 1237:2012)	200.0
11 (Finish-IS 1237:2012)	200.0
12.4 (Straightness-Annex D of IS 1237:2012)	500.0
12.3 (Perpendicularity-Annex C of IS 1237:2012)	500.0
12.2 (Flatness-Annex B of IS 1237:2012)	500.0

1502

National Test House (ER), Kolkata

CUSTOM - Chemical Composition of Galvalume Sheet

Chemical Composition of Galvalume Sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Aluminium, % by weight)	1200.0
2 (Zinc, % by weight)	1200.0
3 (Silicon, % by weight)	1200.0

1503

National Test House (NR), Ghaziabad

NTH/NR/RPPT/Nylon Bush (2024) - Nylon Bush

Nylon Bush

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
FTIR Method (Identification of Material)	3000.0
On the lines of ASTM D792 (Specific Gravity)	1000.0
On the lines of ASTM D2240 (Hardness, Shore'D')	1000.0
On the Lines of ASTM D570 (Water Absorption)	1000.0
Firm's Requirement (Melting Point)	1000.0

1504

National Test House (SR), Chennai

IEC 60214-1:2014 - Tap-changers – Part 1: Performance requirements and test methods

Tap-changers – Part 1: Performance requirements and test methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Cl.no: 5.2.6.2 Mechanical endurance test as per IEC 60214-1)	20000.0
2 (Pressure and vacuum tests as per clause 5.2.6.5 of IEC 60214-1 2014)	5000.0
3 (Mechanical load test as per IEC 60214-1 2014 clause 6.2.1)	15000.0
4 (Overrun test as per IEC 60214-1 2014 clause 6.2.2)	1500.0
5 (Five Witness charges)	25000.0
6 (Drawing Verification)	3000.0
5.2.2 & 7.2.2 (Temperature Rise of Contact)	10000.0
5.2.6.3 (Sequence Test)	5000.0
5.2.5.1 (Transition Impedance test)	7000.0

1505

National Test House (WR), Mumbai

IS 16205 (Part 24) : 2017 - CONDUIT SYSTEMS FOR CABLE MANAGEMENT

CONDUIT SYSTEMS FOR CABLE MANAGEMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.2 (Compression Test)	2000.0
10.3 (Impact Test)	2000.0
13 (Fire hazard(Spread of Fire))	5000.0

1506

National Test House (NR), Ghaziabad

IS 17953 (2023) - uPVC Profiles for Windows and Doors - Specification

uPVC Profiles for Windows and Doors - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Appearance)	1000.0
5.3.1 (Dimensions and Tolerances)	2000.0
5.3.2 (Wall Thickness of Main Profile)	1000.0
5.3.4 (Straightness)	1000.0
5.4 (Mass of Profile)	1000.0
5.5 (Heat Reversion)	2000.0
5.6 (Resistance to Impact on Falling Mass)	3000.0
5.7 (Heat Ageing)	2000.0
5.11 (Density)	1000.0
Annexure B-3.1 (Vicat Softening Temperature)	2000.0
Annexure B-3.2 (Flexural Modulus of Elasticity)	2000.0

1507

National Test House (ER), Kolkata

IRS:S88/2004 (2004) - LOW MAINTENANCE LEAD ACID STATIONARY SECONDARY CELLS FOR S&T INSTALLATIONS

LOW MAINTENANCE LEAD ACID STATIONARY SECONDARY CELLS FOR S&T INSTALLATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Verification of constructional Requirements)	500.0
7.3 (Verification of Marking)	500.0
7.4 (Verification of dimension)	500.0
7.5 (Test for Capacity)	20000.0
7.6 (Test for loss of capacity on storage)	10000.0
7.7 (Endurance Test)	45000.0
7.8 (Ampere Hour & Watt Hour Efficiency Test)	20000.0
7.9 (Test for voltage during discharge)	5000.0
7.10 (Life Test)	240000.0
7.11 (Storage Test)	10000.0
7.12 (Water loss Test)	5000.0
7.13 (Equilibrium Float Current Test)	5000.0
7.14 (Sulphation Test)	20000.0
7.15 (Air Pressure Test on containers consisting of finished cell/Battery)	10000.0

1508

National Test House (SR), Chennai

IS 303 (1989) - Plywood for General Purposes -

Plywood for General Purposes -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 & Table 3 (Dimensions and Tolerances-IS 303:1989, Annex C)	2000.0
9 (Workmanship & Finish-IS 303:1989)	500.0
11.3 (Moisture content-IS 1734 (Part 1):1983)	1000.0
11.4 & Table 4 (Static Bending Strength-IS 1734 (Part 11):1983)	3000.0
11.2.1 (Glue Adhesion-Water Resistance Test- IS 303:1989 & IS 1734 (Part 5):1983)	2000.0
11.2.2 (Glue Adhesion-Mycological Test -IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983)	1500.0
5, Table 1 & 2 (Classification by Appearance-IS 303:1989)	2000.0

1509

National Test House (WR), Mumbai

IS 1060(Part 1):1966 - Paper

Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Breaking length ,CD)	2000.0
- (Breaking length, MD)	2000.0

1510

National Test House (NWR), Jaipur

IS 9385 (1980) - SPECIFICATION FOR HIGH VOLTAGE FUSES (EXPULSION AND SIMILAR FUSES)

SPECIFICATION FOR HIGH VOLTAGE FUSES (EXPULSION AND SIMILAR FUSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.6 (Temperature Rise Test)	20000.0

1511

National Test House (NER), Guwahati

IS 15366 (2003) - Dolomite for paint industry - Specification

Dolomite for paint industry - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Magnesium Carbonate)	1000.0
4.2 (Calcium Carbonate)	1000.0
4.2 (Acid insoluble residue)	1000.0
4.2 (pH Value)	1000.0
4.2 (Volatile matter)	1000.0
4.2 (Loss on Ignition, percent by mass)	1000.0

1512

National Test House (ER), Kolkata

ICF/MD/SPEC-091 ISSUE STATUS : 01 REV.N0 : 02 - SPECIFICATION FOR POWDER COATED ITEMS/ COMPONENTS USED IN RAILWAY PASSENGER COACHES

SPECIFICATION FOR POWDER COATED ITEMS/ COMPONENTS USED IN RAILWAY PASSENGER COACHES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 TYPE TEST sr no 1 (Protection against corrosion FOR 100 HOURS IS:101 (Part-6-Sec.1 ))	5000.0
6.0 TYPE TEST:SR No 2 (Protection against humidity IS:101 (Part 6/sec1))	2500.0
6.0 Type Test SR No 3 (Resistance to Heat double-bake schedule 16 hrs IS: 101 (Part-7/Sec.3) as per Clause 8 and 8.1.1 restricted to250degC)	2500.0
6.0 Type test SR No 4 (Colour Fastness to light(100 hours) As per clause D 3.2.3 of1S:8662 & IS: 133 Sl.N0.V11 Table.l Apparatus: Xenon Arc accelerated weatherometer in the region of 280-315nm)	5000.0

1513

National Test House (NWR), Jaipur

IS/IEC:60529-2001 & IEC 61439-1: 2009 - IP-42 Class of protection test Drawing Verification Power Frequency Voltage withstand test after IP test Dielectric Properties test after IP test

IP-42 Class of protection test Drawing Verification Power Frequency Voltage withstand test after IP test Dielectric Properties test after IP test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1514

National Test House (NWR), Jaipur

IEC 61439-1: 2009 & IS/IEC:60529-2001 - IP-65 Class of protection test Drawing Verification Power Frequency Voltage withstand test before and after IP test Dielectric Properties test before and after IP test

IP-65 Class of protection test Drawing Verification Power Frequency Voltage withstand test before and after IP test Dielectric Properties test before and after IP test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Temperature Rise Test)	20000.0

1515

National Test House (NWR), Jaipur

8623-1:(1993) - Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1.3 (Tempreture rise test)	20000.0

1516

National Test House (ER), Kolkata

ASTM B117 SALT SPRAY TEST PAINT LAB (2022) - ASTM B117 SALT SPRAY TEST

ASTM B117 SALT SPRAY TEST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (ASTM B117 SALT SPRAY TEST FOR 96 HOURS)	5000.0

1517

National Test House (NWR), Jaipur

IS 16353 (2015) - Portland Cement Clinker - Specification

Portland Cement Clinker - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	600.0
5 (Ratio of percentage of alumina to that of iron oxide)	600.0
5 (C3S)	600.0
5 (C3A)	600.0
5 (C3S + C2S)	600.0
5 (Total Sulphur content calculated as sulphuric anhydride(SO3))	500.0
5 (Free lime)	600.0
5 (Chloride content)	500.0
5 (Magnesia)	600.0
5 (Alkali content expressed as sodium oxide(Na2O))	1200.0
5 (Total loss on ignition)	600.0
5 (Insoluble residue)	600.0

1518

National Test House (NR), Ghaziabad

CUSTOMER SPEC - NC WHITE GLOSSY SURFACER

NC WHITE GLOSSY SURFACER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Please see the Annexure)	3000.0

1519

National Test House (NR), Ghaziabad

IS 133 (2013) - ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.5.1 Table 1 (TEST RESULTS (Please see the Annexure) AS PER CUSTOMER REQUEST)	4000.0

1520

National Test House (NR), Ghaziabad

NTH/NR/RPPT/PVC Coated Fabric (2024) - PVC Coated Fabric-Both Side Coated

PVC Coated Fabric-Both Side Coated

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7016 Part-I (Weight)	1000.0
IS 7016 Part-I (Thickness)	1000.0
IS 7016 Part-II (Breaking Strength, Warp)	1500.0
IS 7016 Part-II (Breaking Strength, Weft)	1500.0
IS 7016 Part-III (Tear Strength, Warp)	1500.0
IS 7016 Part-III (Tear Strength, Weft)	1500.0
IS 7016 Part-V (Adhesion)	2000.0
IS 7016 Part-VII (Water Proofness @220 PSI)	2000.0

1521

National Test House (SR), Chennai

IS 12089 (1987) - Specification for Granulated Slag for the Manufacture of Portland Slag Cement

Specification for Granulated Slag for the Manufacture of Portland Slag Cement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0.3 (Moisture)	1000.0
3.2 (Manganese oxide)	1000.0
3.2 (Magnesium oxide (MgO))	1000.0
3.2 (Sulphide sulphur)	1000.0
3.3 ([CaO + MgO + 1/3 Al2O3] / [SiO2 + 2/3 Al2O3])	6000.0
3.3 ([CaO + MgO + Al2O3] / SiO2)	6000.0
3.3 ([CaO + CaS + 1/2 MgO + Al2O3] / [SiO2 + MnO])	6000.0
3.4 (Insoluble residue)	1000.0

1522

National Test House (SR), Chennai

Custom/SR/Chemical/Water (2023) - Custom Standard from CPWD-Karaikal for STP/WTP Treated Water

Custom Standard from CPWD-Karaikal for STP/WTP Treated Water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (pH)	1000.0
2. (Bio-chemical oxygen demand (BOD))	3000.0
3. (Total suspended solids)	1000.0
4. (Chemical oxygen demand (COD))	2000.0
5. (Nitrogen)	1000.0
6. (Phosphorous)	1000.0
7. (Fecal coliform)	1000.0
8. (Oil & grease)	1000.0
9. (Total dissolved soilds (TDS))	1000.0
10 (Coliform)	1000.0

1523

National Test House (SR), Chennai

Custom/SR/Chemical/Phosphating Chemical (2023) - Custom Standard from Ordinance Factory for Phosphating Solution Hot Dip Type

Custom Standard from Ordinance Factory for Phosphating Solution Hot Dip Type

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Appearance)	1000.0
2. (Specific gravity)	1000.0
3. (pH of 10% solution)	1000.0
4. (Free acidity as H3PO4)	1000.0
5. (Manganese compound as Mn)	1000.0

1524

National Test House (WR), Mumbai

IS 15337 : 2003 (2003) - COAL TAR BASED ANTICORROSION TAPE FOR PROTECTION OF UNDERGROUND MILD STEEL PIPELINES - SPECIFICATION

COAL TAR BASED ANTICORROSION TAPE FOR PROTECTION OF UNDERGROUND MILD STEEL PIPELINES - SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table No. 4 (Solubility of coal tar based tape in petrol (As per Annexure C of IS 15337))	1500.0

1525

National Test House (WR), Mumbai

Customized Specification for ASPHALTOSEAL (Mastic Pad for Bridge Deck) - Customized Specification for ASPHALTOSEAL (Mastic Pad for Bridge Deck)

Customized Specification for ASPHALTOSEAL (Mastic Pad for Bridge Deck)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness (mm.))	1000.0
- (Weight(Kg./sq.m))	1000.0
- (Softening Point(Compound Property) Deg. C)	1500.0
- (Penetration @25Deg.C ,100g,5 seconds (Compound Property)-dmm)	1500.0
- (Tensile Strength (Longitudinal)-N/5cm.)	1000.0
- (Tensile Strength(Transverse)-N/5cm.)	1000.0
- (Elongation(Longitudinal)-%)	1000.0
- (Elongation(Transverse)-%)	1000.0
- (Tear Resistance(Longitudinal)-N)	2000.0
- (Tear Resistance(Transverse)-N)	2000.0

1526

National Test House (SR), Chennai

CUS/SR/MECH-46 (2024) - Beater

Beater

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Length, mm)	1000.0
2.0 (Weight, gm)	500.0

1527

National Test House (SR), Chennai

CUS/SR/MECH-45 (2024) - Cleaning Aid

Cleaning Aid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Length, mm)	1000.0
2.0 (Weight, gm)	500.0

1528

National Test House (Satellite Centre), Varanasi

Customized Specification for ILC of RPPT Lab - Paper/Rubber/Plastics/Textiles

Paper/Rubber/Plastics/Textiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (ILC of Paper/Rubber/Plastics/Textiles)	-

1529

National Test House (ER), Kolkata

IS 1891 (Part 2) (1993 (reaffirmed 2008)) - Conveyor & Elevetor Textile Belting Part 2 (Heat Resistant Belt)

Conveyor & Elevetor Textile Belting Part 2 (Heat Resistant Belt)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1530

National Test House (ER), Kolkata

IS 16415 (2015) - Composite cement - Specification

Composite cement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Test for Consistency)	500.0
Table 3,i (Fineness)	1000.0
Table 3,ii,a (Soundness-by Le-chatelier method)	500.0
Table 3,ii,b (Soundness -by Autoclave method)	500.0
Table 3,iii,a (Setting Time-Initial)	250.0
Table 3,iii,b (Setting Time-Final)	250.0
Table-3 (Compressive strength - 24 h (±) 30 min)	1000.0
Table-3,iv,b (Compressive strength-168(±)2 h)	1000.0
Table-3,iv,c (Compressive strength-672(±)4 h)	1000.0
Table-3,v (Drying shrinkage)	1000.0
6.1 (Alkali Content)	1200.0
6.1 (Chloride content)	1200.0
6.1 (Loss on ignition)	1200.0
6.1 (Sulphide sulphur (S))	1200.0
6.1 (Total Sulphur content calculated as sulphuric anhydride(SO3))	1200.0
6.1 (Magnesia)	1200.0
6.1 (Insoluble residue)	1200.0
Table 2,iii (Total Sulphur content as SO3)	1200.0