NTH - Management Information System

Search by Standard No.

Reset

3862 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1381

National Test House (ER), Kolkata

F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat, microns)	1000.0
3 (Theoretical coverage m2/litre/coat)	1000.0
4 (weight per litre in Kg/litre)	500.0
5 (Touch Dry @ 30°C Hours)	500.0
6 (Hard Dry Time @ 30°C Hours)	500.0
7 (Overcoating Intervals Hours)	1000.0
8 (Pot Life in Hrs for two component paints)	1000.0
9 (Adhesion ASTM D 4541)	3500.0
10 (Abrasion Resistance ASTM D 4060 For 1000 g load/1000 cycles CS-17 wheel)	3500.0
11 (Temperature Resistance (at 80 deg C.) Method A- ASTM D 2485)	2500.0

1382

National Test House (ER), Kolkata

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Carbon)	500.0
4.3 (Sulphur)	500.0
4.3 (Phosphorus)	500.0
4.3 (Silicon)	500.0
4.3 (Manganese)	500.0
4.3 (Chromium)	500.0
4.3 (Nickel)	500.0
4.3 (Molybdenum)	500.0
4.3 (Copper)	500.0
9.3 (Bend Test)	1000.0
5.2 (Rib Area)	1000.0
7.2 (Nominal Mass per meter Run)	1000.0
9.4 (Rebend Test (Upto 25 mm))	1000.0
8.6 (Charpy Impact Test at Room Temperature)	5000.0
9.2 (0.2 % Proof Stress / Yield Stress)	1000.0
9.2 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area)	500.0
9.2 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Crosss- Sectional Area,)	500.0
9.2 (Tensile Strength (up to 12 mm),)	500.0
9.2 (Tensile Strength (16 to 25 mm))	1000.0
9.2 (Tensile Strength (32 mm))	1500.0
9.4 (Rebend Test (32 mm))	1500.0
5.7 (Bond Stress of deformed bar at Ultimate Failure (for size up to 12 mm))	1250.0
5.7 (Bond Stress of plain bar at Ultimate Failure (for size up to 12 mm))	1250.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.25 mm slip (For size up to 12 mm ))	1250.0
5.7 (Bond Stress of deformed bar at 0.25 mm slip (for size up to 12 mm))	1250.0
5.7 (Bond Stress of Plain bar at 0.25 mm slip (for size up to 12 mm))	1250.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.025 mm slip (For size up to 12 mm))	1250.0
5.7 (Bond Stress of Deformed bar at 0.025 mm slip (for size up to 12 mm))	1250.0
5.7 (Bond Stress of Plain bar at 0.025 mm slip (for size up to 12 mm))	1250.0
5.7 (Bond Stress of Plain bar at 0.025 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of deformed bar at 0.025 mm slip (for size 16 to 32mm))	1875.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.025 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of Plain bar at 0.25 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of deformed bar at 0.25 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.25 mm slip (for size 16 to 32 mm),)	1875.0
5.7 (Bond Stress of plain bar at Ultimate Failure (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of deformed bar at Ultimate Failure (for size 16 to 40 mm))	1875.0

1383

National Test House (WR), Mumbai

Customized Specification for FLEXSEAL 4 mm. - Customized Specification for FLEXSEAL 4 mm.

Customized Specification for FLEXSEAL 4 mm.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength (Transverse) as per ASTM D 5147 (N/50mm.))	1000.0
- (Tensile Strength (Longitudinal) as per ASTM D 5147 (N/50mm.))	1000.0
- (Elongation as per ASTM D 5147 (Longitudinal))	1000.0
- (Elongation as per ASTM D 5147 (Transverse))	1000.0
- (Tear Strength(Longitudinal) as per ASTM D 5147)	1000.0
- (Low Temperature Flexibility as per ASTM D 5147)	3000.0
- (Compound Stability at 100 deg. C as per ASTM D 5147)	3000.0
- (Dimensional Stability as per ASTM D 5147(Longitudinal))	1000.0
- (Dimensional Stability as per ASTM D 5147(Transverse))	1000.0
- (Tear Strength(Transverse) as per ASTM D 5147)	1000.0

1384

National Test House (WR), Mumbai

Customized Specification for Streseal - Customized Specification for Streseal

Customized Specification for Streseal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength as per ASTM D 4632(Longitudinal))	1000.0
- (Tensile Strength as per ASTM D 4632(Transverse))	1000.0
- (Elongation as per ASTM D 4632(Longitudinal))	1000.0
- (Elongation as per ASTM D 4632(Transverse))	1000.0
- (Penetration as per ASTM D 5)	2000.0
- (Softening Point as per ASTM D 36)	2000.0
- (Surface Texture(visual))	1000.0
- (Water absorption as per ASTM D 5147)	2000.0
- (Top Surfacing(Visual))	1000.0
- (Mass per Unit area(Polyester reinforcement) as per ASTM D 3776)	2000.0
- (Puncture Resistance test as per ASTM D 5602)	2000.0

1385

National Test House (SR), Chennai

IS 1130 (Marble) (1969) - Marble

Marble

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1386

National Test House (SR), Chennai

IS 1130 (1969) - Marble (blocks, Slabs And Tiles)

Marble (blocks, Slabs And Tiles)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1387

National Test House (ER), Kolkata

IS 7098 : Part 1 : 1988 (Reaffirmed Year : 2020), Amendments : 5 - Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage up to and including 1100 V

Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage up to and including 1100 V

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1.a.i , 15.2.a (Tests on Conductor - Annealing Test (for copper))	1000.0
15.1.a.ii , 15.2.b (Tests on Conductor - Tensile Test (for Aluminium))	1000.0
15.1.a.iii , 15.2.c (Tests on Conductor - Wrapping Test (for Aluminium))	500.0
15.1.a.iv , 15.2.d (Tests on Conductor - Resistance Test)	2000.0
15.1.b.1 (Test for round steel wire/formed steel wire(strip) armour - Dimensions)	500.0
15.1.b.2.i (Test for round steel wire/formed steel wire(strip) armour - Tensile Strength)	1000.0
15.1.b.2.ii (Test for round steel wire/formed steel wire(strip) armour - Elongation at Break)	1000.0
15.1.b.2.iii (Test for round steel wire/formed steel wire(strip) armour - Torsion test for round wires)	1000.0
15.1.b.2.iv (Test for round steel wire/formed steel wire(strip) armour - winding test for formed wires)	1000.0
15.1.b.2.v (Test for round steel wire/formed steel wire(strip) armour - Uniformity of zinc coating)	1000.0
15.1.b.2.vi (Test for round steel wire/formed steel wire(strip) armour - Mass of zinc coating)	2000.0
15.1.b.2.vii (Test for round steel wire/formed steel wire(strip) armour - Resistivity)	2000.0
15.1.c , 15.2.e (Test for thickness of insulation and sheath)	1000.0
15.1.d.i , 15.2.g (Physical test for insulation - Tensile strength and elongation at breakj)	1500.0
15.1.d.ii (Physical test for insulation - Ageing in oven)	2000.0
15.1.d.iii , 15.2.f (Physical test for insulation - Hot set test)	1000.0
15.1.d.iv (Physical test for insulation - Shrinkage test)	1000.0
15.1.d.v (Physical test for insulation - Water absorption test (gravimetric)))	1000.0
15.1.e.i , 15.2.g (Physical tests for outer sheath - Tensile strength and elongation at break)	1000.0
15.1.e.ii (Physical tests for outer sheath - Ageing in air oven)	1000.0
15.1.e.iii (Physical tests for outer sheath - Loss of mass in air oven)	1000.0
15.1.e.iv (Physical tests for outer sheath - Shrinkage test)	500.0
15.1.e.v (Physical tests for outer sheath - Hot deformation test)	500.0
15.1.e.vi (Physical tests for outer sheath - Heat shock test)	500.0
15.1.e.vii (Physical tests for outer sheath - Thermal stability)	1000.0
15.1.f , 15.2.j (Insulation resistance (Volume resistivity test))	2000.0
15.1.g , 15.2.h (High voltage test)	2000.0
15.1.h (Flammability test)	500.0
15.1.1.C1.a , 15.1.1.C2.a , 15.2.1.C1.a , 15.2.1.C2.a (Oxygen Index Test (for Category C1 & C2))	5000.0
15.1.1.C1.b , 15.1.1.C2.b , 15.2.1.C1.b , 15.2.1.C2.b (Flame retardance test on single cable (for category C1 & C2))	5000.0
15.1.1.C1.c , 15.1.1.C2.c , (Flame retardance test on bunched cable)	5000.0
15.1.1.C1.d , 15.1.1.C2.g (Temperature Index)	5000.0
15.1.1.C2.e (Smoke density)	5000.0
15.1.1.C2.f , 15.2.1.C2.d (Test for halogen acid gas evolution)	5000.0
- (Test on 2nd Core)	2000.0
- (Test on 3rd Core)	2000.0
- (Test on 4th Core)	2000.0
- (Test on 5th Core)	2000.0
- (Test on 6th Core)	2000.0
- (Test on 7th core)	2000.0
- (Test on 8th Core)	2000.0

1388

National Test House (SR), Chennai

IS 208 (2020) - Door Handles - Specification ( Sixth Revision )

Door Handles - Specification ( Sixth Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
7 (Anodizing)	2000.0
8.1 (Pencil Hardness Test)	1000.0
8.2 (Corrosion Test)	2000.0
8.3 (Quenching Test)	2000.0

1389

National Test House (WR), Mumbai

SMCCustomized Specification For SPRING LOADED SERIVCE CONNECTION BOX - SMC SPRING LOADED SERIVCE CONNECTION BOX

SMC SPRING LOADED SERIVCE CONNECTION BOX

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Flammability as per UL-94/IS-11731)	5000.0
- (Glow wire test at 960 deg.C as per IS 11000)	2000.0
- (Ball Pressure Test as per IEC-335)	2000.0
- (UV ageing test for 200 hours)	12000.0
- (Water absorption as per IS 13411:1992 Method 1)	2000.0
- (Material Identification)	1996.0
- (Glass Contents by Mass(Min.) as per IS 13410:1992)	2000.0
- (Izod Impact Strength(Notched) as per IS 13410:1992)	2000.0
- (Flexural Strength as per IS 13410:1992)	2000.0
- (Tracking Resistance CTI,Min. as per IS 13410:1992)	1000.0
- (Tensile Strength as per IS 13410:1992)	4000.0
- (Density Of Moulding as per IS 13410:1992)	1000.0
- (Volume Resistivity as per IS 13410:1992)	1500.0
- (Surface Resistivity as per IS 13410:1992)	1500.0
- (Dielectric Strength at 90deg.C in Oil)	2000.0
- (Oxygen Index as per IS 13410:1992)	4000.0

1390

National Test House (SR), Chennai

IS 204 (1992) - Tower Bolts

Tower Bolts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
7 (Anodizing)	2000.0

1391

National Test House (ER), Kolkata

IS 7014 (1973) - Specification for Length Bars

Specification for Length Bars

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 (Length)	9600.0

1392

National Test House (SR), Chennai

IS 2681 (1993) - Non-ferrous metal sliding door bolts (Aldrops) for use with padlocks

Non-ferrous metal sliding door bolts (Aldrops) for use with padlocks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
8.2 (Anodizing)	2000.0

1393

National Test House (SR), Chennai

IS 205 (1992) - Non Ferrous Metal Butt Hinges

Non Ferrous Metal Butt Hinges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Dimensions)	2000.0
6.3 (Dimension measurement & Visual Observation)	2000.0
7.2 (Anodizing)	2000.0

1394

National Test House (ER), Kolkata

IS 11103 (1984) - Specification for Cylindrical Measuring Pins (Size Range from 0.1 mm up to and Including 20 mm)

Specification for Cylindrical Measuring Pins (Size Range from 0.1 mm up to and Including 20 mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Diameter)	7500.0

1395

National Test House (ER), Kolkata

Custom - Used cooked oil

Used cooked oil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Moisture Content % by mass)	1200.0
2 (Density)	1200.0
3 (Free Fatty Acid)	1200.0
4 (Kinematic Viscosity at Room Temp)	1200.0

1396

National Test House (ER), Kolkata

CUSTOM - Fly Ash

Fly Ash

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Loss on Ignition)	1200.0
2 (CaO)	1200.0
3 (Fe2O3)	1200.0
4 (MgO)	1200.0
5 (Al2O3)	1200.0
6 (SiO2)	1200.0

1397

National Test House (ER), Kolkata

IRS:TC 30-05 (2006) - Underground railway jelly filled telecom quad cables for signalling & telecom installations

Underground railway jelly filled telecom quad cables for signalling & telecom installations

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5.1 (Physical tests for conductor - Dimensions)	500.0
5.7 (Test for thickness of insulation and sheaths)	1000.0
5.8.2.3 (Physical tests for pe insulation, pe inner sheath, pvc intermediate and outer sheath - Shrinkage Test)	500.0
5.9.3 (Conductor resistance test)	1500.0
3.2.4 (Colour of insulated quad test)	500.0
5.9.1 (High voltage test)	3000.0
5.9.2.1 & 5.9.2.2 (Insulation Resistance Test)	3000.0
5.6.1 (Physical test for armour tapes - Dimensions)	1000.0
5.6.5 (Physical test for armour tapes - Test for closeness of armour)	1000.0
- (Testing on extra core of 24 Quad Cable)	46000.0
- (Testing of each extra core)	2000.0

1398

National Test House (WR), Mumbai

Custom Fine Particles (NTH WR) - Physical and Chemical test of Fine Particles

Physical and Chemical test of Fine Particles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Size and Gradation, [IS 2386 (Part 1):1963])	2000.0
1 (Specific Gravity [IS 2386 (Part 3):1963])	1000.0
1 (Loose Bulk Density [IS 2386 (Part 3):1963], kg/m^3)	500.0
1 (Compacted Bulk Density [ IS 2386 (Part 3) : 1963], kg/m^3)	500.0
1 (Silicon dioxide [IS 4032], %)	1000.0
1 (Alumina (Al2O3) [IS 4032], %)	1000.0
1 (Ferric Oxide (as Fe2O3) [ IS 4032 ], %)	1000.0
1 (Calcium Oxide (as CaO), [ IS 4032 ], %)	1000.0
1 (Magnesium Oxide (as MgO), [ IS 4032], %)	1000.0
6.2 of IS 1727 (Fineness by Sieveing ( sieve analysis), %)	2000.0
15 of IS 1727 (Specific Gravity (as per IS 1727 : 1967))	1000.0
5.4 of IS 1727 (Silica (as per IS 1727 : 1967), %)	1000.0
5.5 of IS 1727 (Ferric Oxide (as per IS 1727 : 1967), %)	1000.0
5.7 of IS 1727 (Alumina (as per IS 1727 : 1967), %)	1000.0
5.8 of IS 1727 (Calcium Oxide (as per IS 1727 : 1967), %)	1000.0
5.9 of IS 1727 (Magnesia (as per IS 1727 : 1967), %)	1000.0

1399

National Test House (WR), Mumbai

IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Tensile Strength of Line Wire)	1000.0
12.1 (Breaking Load of Completed Barbed Wire)	1000.0
12.3 (Ductility)	1000.0
12.2.1 (Zinc Coating of Line wire)	2000.0
5 (Dimension/ Sizes)	1000.0
9 (Freedom from Defects)	500.0
6 (Chemical composition (Carbon))	625.0
6 (Chemical composition (Manganese))	625.0
6 (Chemical composition (Sulphur))	625.0
6 (Chemical composition (Phosphorus))	625.0
6 (Chemical composition)	2500.0

1400

National Test House (NR), Ghaziabad

Prestressing hardware - Prestressing hardware ( Anchor head, Barrel, Bearing Plate, Wedge, Trumpet cone and HDPE Sheathing)

Prestressing hardware ( Anchor head, Barrel, Bearing Plate, Wedge, Trumpet cone and HDPE Sheathing)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1401

National Test House (WR), Mumbai

18433 (2023) - Measurement of surface Friction Properties - Method of Test (Pendulum Test)

Measurement of surface Friction Properties - Method of Test (Pendulum Test)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Test for Surface Friction Properties, Pendulum Test Number.)	2000.0

1402

National Test House (NR), Ghaziabad

ISO 13918 (2008) - Welding - Studs and ceramic ferrules for arc stud welding

Welding - Studs and ceramic ferrules for arc stud welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3.3. (Tensile Strength)	1000.0
5.3.3. (Elongation)	1000.0
5.3.3. (Yield Strength)	1000.0
5.3.3. (Carbon)	1000.0
5.3.3. (Aluminium)	1000.0
5.3.3. (Carbon Equivalent)	3000.0

1403

National Test House (SR), Chennai

IS 1708(Parts 1-18)1986: RA 2020 - METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER

METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Moisture content (IS 1708(1):1986))	1000.0
2 (Specific gravity (IS 1708(2):1986))	500.0
3 (Volumetric Shrinkage (IS 1708(3)1986))	1000.0
5 (Static bending strength (IS 1708(5):1986) 1.Fibre stress at limit of proportionality(FS at LP) 2.Equivalent fibre stress at maximum load(MOR) 3.Modulus of Elasticity( M of E) 4.Horizontal shear(HS)stress on neutral plan at LP 5.Horizontal shear stress at maximum load(ML) 6.Wk to LP 7.Wk to ML)	3000.0
15 (Screw holding power(IS 1708(15):1986))	1500.0
8 (Compressive strength-Parallel to grain(IS 1708(8)1986))	1500.0
9 (Compressive strength-Perpendicular to grain(IS 1708(9):1986))	1500.0
12 (Tensile strength -Parallel to grain(IS 1708(12):1986))	2000.0
15 (Nail holding Power (IS 1708(15):1986))	1500.0
5 (Static bending strength-Equivalent fibre stress at maximum load ( modulus of rupture - M of R ) & Modulus of elasticity ( M of E ))	2000.0
custom (Dimension)	1000.0
custom (Shear strength Parallel to Grain (IS 1708 ( Part 12 ) • 1986))	1500.0

1404

National Test House (ER), Kolkata

IS 13410 (1992) - Glass reinforced polyester sheet moulding compounds(Smc) - Specification

Glass reinforced polyester sheet moulding compounds(Smc) - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 (Glass Content percent by mass)	3000.0
6.0 (Izod Impact Strength)	2000.0
6.0 (Tensile Strength)	2000.0
6.0 (Flexural Strength)	2000.0

1405

National Test House (SR), Chennai

CUS/SR/MECH-49 (2024) - FRP Coated SS Plate

FRP Coated SS Plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Peel off test)	2500.0
2.0 (Shrinkage test)	2500.0

1406

National Test House (ER), Kolkata

IS 2095 : Part 1 (2011) - Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards

Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3, Table3, 8.1 (Transverse Strength-IS: 2542 (Part 2/Sec 4))	4000.0
7.1, Table1 /Table2, 8.1 (Dimensions-IS: 2542 (Part 2/Sec 1))	500.0
7.2, 8.2 (Taper Profile-IS 2095 (1):2011)	2000.0

1407

National Test House (NWR), Jaipur

ILC for HDPE pipes NTH/NR/XR/ILC/2024/13 - ILC for HDPE Pipes

ILC for HDPE Pipes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Melt Flow Index as per IS 2530)	-
- (Density as per IS 7328)	-
- (Thickness as per IS 4984:2016)	-
- (Elongation as per annexure "H" of IS 4984)	-
- (Carbon Black Content as per IS 2530)	-

1408

National Test House (NWR), Jaipur

ILC for PVC Pipe NTH/NR/XR/ILC/2024/12 - ILC for PVC Pipes

ILC for PVC Pipes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Ash Content as per IS 4985:2021)	-
- (Density as per IS 12235)	-
- (Vicat Softening Point as per IS 4985:2021)	-
- (Opacity as per IS 4985:2021)	-

1409

National Test House (NWR), Jaipur

Customized Specification for ILC of RPPT Lab - Paper/Rubber/Plastics/Textiles

Paper/Rubber/Plastics/Textiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (ILC of Paper/Rubber/Plastics/Textiles)	-

1410

National Test House (SR), Chennai

TI/SPC/OHE/CW/0971 - Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1.1 (Visual Examination)	1000.0
9.1.2 (Dimension)	2000.0
9.1.3 (Weight)	1500.0
9.1.4 (Resistance/km at 20 Deg. C)	3000.0
9.1.5 (Brinell Hardness)	2000.0
9.1.6 (Tensile Strength)	2000.0
9.1.7 (Elongation at Gauge Length 200 mm)	1000.0
9.1.8 (Bending Test)	1000.0
9.1.9 ((Cu+Ag))	2000.0
9.1.10 (Micro structure Examination)	3000.0