NTH - Management Information System

Search by Standard No.

Reset

3985 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1351

National Test House (WR), Mumbai

MMDTS -22001 - Schedule of Technical Requirements for Anodized Aluminium Braille Stickers for Signage on Railway Coaches

Schedule of Technical Requirements for Anodized Aluminium Braille Stickers for Signage on Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Abrasion Resistance)	3000.0
- (Acid Corrosion Resistance)	1500.0
- (Heat Resistance at 120 deg. C for 3 hours)	1500.0
- (Adhesion Between Basic and Braille Layers test)	2000.0
- (Stain Resistance Test)	1000.0
- (Ease of Cleaning)	1000.0
- (Chemical composition of Braille and Base Layers)	5000.0
- (Corrosion resistance from Neutral Salt Spray)	21000.0
- (Accelerated Weathering Test)	35000.0

1352

National Test House (WR), Mumbai

IS 8540 - Glass Cleaner

Glass Cleaner

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Colour)	500.0
- (Odour)	500.0
- (Toxicity)	3000.0
- (Stability)	1000.0
- (Application and Performance)	500.0
- (Water content)	1500.0
- (Flash Point)	1000.0
- (Non-Volatile Matter Content)	1000.0
- (pH Value)	1000.0
- (Test for Cleaning Efficiency)	1500.0
- (Test for Corrosion or Discolouration)	1500.0

1353

National Test House (ER), Kolkata

IS 13620 (1993) - Fusion Bonded Epoxy Coated Reinforcing Bars -

Fusion Bonded Epoxy Coated Reinforcing Bars -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-5 (Pull-out test)	20000.0
7.1 (Coating Thickness)	1500.0
7.3 (Adhesion of Coating)	2000.0
A-7 (Impact Test - Resistance of Coating)	1500.0

1354

National Test House (NR), Ghaziabad

IS 5354 (1992) - Textiles - Cotton stripping tape for electrical purposes - Specification (first revision)

Textiles - Cotton stripping tape for electrical purposes - Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. 4.2 (Length)	1000.0
Table 1 (Thickness)	1000.0
Table 1 (Width)	1000.0
Table 1 (Ends/dm)	1000.0
Table 1 (Picks/dm)	1000.0
Table 1 (Weave)	1000.0
Firm's requirement (pH)	1000.0
Firm's requirement (pH after immersion in transformer oil)	3000.0

1355

National Test House (SR), Chennai

IS 516 (Part-11) (2020) - Hardened Concrete - Determination of Portland cement Content of Hardened Hydraulic Cement Concrete

Hardened Concrete - Determination of Portland cement Content of Hardened Hydraulic Cement Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Portland cement content of a sample of hardened hydraulic cement concrete - IS 516 (Part 11) : 2020)	5000.0
Custom (Cement : Sand ratio by weight (considering the submitted mortar sample contains Sand & OPC only))	1000.0

1356

National Test House (ER), Kolkata

Custom - Modified Bitumen

Modified Bitumen

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Softening point)	1200.0
2 (Penetration)	1200.0

1357

National Test House (WR), Mumbai

ASM Vol 10 (1975) - FAILURE ANALYSIS AND PREVENTION

FAILURE ANALYSIS AND PREVENTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASM (Failure investigation of metallic component and suggestions to avoid re occurrence of the failure)	50000.0

1358

National Test House (WR), Mumbai

- - Non Woven Geo Textiles

Non Woven Geo Textiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Mass per unit area as per ASTM D 5261)	1000.0
- (Tensile Strength as per ASTM D 4632)	4000.0
- (Thickness as per IS 1060(P 5)Sec 3)	1000.0

1359

National Test House (SR), Chennai

IS 2629 (1985 (Reaffirmed 2021)) - Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification

Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Freedom From Defect as per IS 2629)	1250.0
6.3 (Mass of Coating)	2000.0
6.2 (Uniformity in Thickness)	1000.0
6.4.1 (Pivoted Hammer Test for Zinc Coated Fabricated Product)	3000.0
6.4.3 (Bend Test)	1000.0
6.4.1 (Pivoted Hammer Test)	1000.0
6.4.2 (Knife Test)	1000.0
TDS-1 (Coating thickness test (as per IS 6012))	1500.0
6.2 (Uniformity of zinc coating (as per IS 2633))	1000.0
TDS-2 (Dimension, mm)	1000.0
TDS-3 (Tensile Strength (As per IS 1608), N/mm²)	1000.0
TDS-4 (Yield Strength (As per IS 1608), N/mm²)	1000.0
TDS-5 (Percentage Elongation (As per IS 1608), %)	1000.0
TDS-6 (Bend Test (As per IS 1599))	1500.0
6.3 (Mass of zinc coating (as per IS 6745), g/m²)	2000.0

1360

National Test House (ER), Kolkata

15041:2001 (RA 2024) - Textiles – Flat woven webbing slings made of man-made fibres for general services

Textiles – Flat woven webbing slings made of man-made fibres for general services

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.28 (Safe Working Load)	3000.0
3.28 (Safe Working Load)	6000.0
3.28 (Safe Working Load)	8000.0
3.28 (Safe Working Load)	10000.0
5.4 (Proof Load)	3000.0
5.4 (Proof Load)	5000.0
5.4 (Proof Load)	8000.0
5.4 (Proof Load)	10000.0

1361

National Test House (NWR), Jaipur

IS 5986 (2017) - Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes

Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Tensile Strength)	2000.0
8 (Yield Stress)	1000.0
8 (Percentage Elongation)	1000.0
9.2.2 (Bend Test)	1500.0
0 (Mass of Zinc Coating as per IS 4759)	2000.0
8.3 (Tensile Test as per Table 6 & 7)	3000.0
7 (Chemical Composition as per Table)	3000.0
10 (Impact Test)	5000.0
0 (Uniformity of Coating as per Is 2633)	1000.0
15 (Dimension)	1000.0
0 (Dimensions & Weight)	2000.0

1362

National Test House (NWR), Jaipur

IS 5986 (2017) - Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1363

National Test House (NWR), Jaipur

1708 (1986) - Testing of Small Specimen of Timber

Testing of Small Specimen of Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 1 (Moisture Content, in %)	1000.0
Part 2 (Specific Gravity /Density, g/cm3)	500.0
Part 5 (Static Bending Strength (MoR), N/mm2)	3000.0
Part 8 (Compressive Strength Parallel to Grain, N/mm2)	3000.0
Part 9 (Compressive Strength Perpendicular to Grain, N/mm2)	3000.0
Part 12 (Tensile Strength Parallel to Grain, N/mm2)	2000.0
Part 5, Cl 4.2 (iii) (Static Bending Strength (Modulus of Elasticity), N/mm^2 (kg/cm^2))	3000.0

1364

National Test House (ER), Kolkata

IS 1838 : Part 3 (2011) - Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based

Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Dimensions)	1000.0
6.0 (Resistance to handling)	1000.0
6.0 (Recovery)	1000.0
6.0 (Compression)	1000.0
6.0 (Extrusion)	1000.0
6.0 (Water Absorption)	1000.0
6.0 (Density)	1000.0
6.0 (Weathering)	5000.0

1365

National Test House (NR), Ghaziabad

02-ABR-02 (2003) - SPECIFICATION FOR AIR BRAKES FOR FREIGHT AND PASSENGER STOCK OF INDIAN RAILWAYS

SPECIFICATION FOR AIR BRAKES FOR FREIGHT AND PASSENGER STOCK OF INDIAN RAILWAYS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Root cause analysis for bursting of BP Hose Pipe)	5000.0

1366

National Test House (Satellite Centre), Varanasi

FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Schedule I Part A (ALL TESTS AS PER FCO-1985 -(PLEASE SEE THE ANNEXURE)-NABL)	7000.0
Schedule I Part A (ALL TESTS AS PER FCO-1985 -(PLEASE SEE THE ANNEXURE) NON NABL)	7000.0
Schedule I Part A (Moisture)	1000.0
Schedule I Part A (Available Phosphorous percent by weight)	1000.0
Schedule I Part A (Water soluble phosphate (as P2O5))	1000.0
1 ()	-
1 (1)	-
Schedule I Part A (Sulphate Sulphur percent by weight)	1000.0
Schedule I Part A (Free Phosphoric Acid percent by weight )	1000.0
Schedule I Part A (Total Nitrogen (ammoniacal and urea))	1000.0
Schedule I Part A (Ammoniacal nitrogen)	1000.0
Schedule I Part A (Water Soluble Potassium percent by weight)	1000.0

1367

National Test House (WR), Mumbai

IS 164 : 2023 (2023) - Ready-Mixed Paint for Road Marking — Specification

Ready-Mixed Paint for Road Marking — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 (Drying time a) Surface dry (IS 101 (Part 3/sec 1)))	600.0
Table 1 (Drying time b) Hard dry (IS 101 (Part 3/Sec 1)))	600.0
Table 1 (Consistency)	600.0
Table 1 (Finish, (IS 101 (Part 3/Sec 4)))	600.0
Table 1 (Colour, (IS 101 (Part 4/Sec 2)))	600.0
Table 1 (Wet opacity, percent, (IS 101 (Part 4/Sec 1)))	600.0
Table 1 (Recoating property, Annexure E)	600.0
Table 1 (Resistance to bleeding, Annexure F)	600.0
Table 1 (Mass in kg/10 liter, (IS 101 (Part 1/Sec 7)))	600.0
Table 1 (Keeping properties (12 Months), (IS 101 (Part 6/Sec 2)))	5000.0
Table 1 (Early wash out resistance (for Type 2 only), Annexure G)	1000.0
Table 1 (No pick up time (for type 2 only), Annexure H)	1000.0
Table 1 (Non Volatile matter , (IS 101 (Part 8/sec 2)))	600.0
Table 1 (Volume solid, (IS 101 (Part 8/sec 6)))	800.0
Table 1 (Taber Abrasion resistance, mg weight loss after 500 cycles using CS10 wheel with 500 g on each load (for type 2 only), Annexure J)	2000.0
Table 1 (Scrub resistance, Annexure K)	2000.0
Table 1 (Resistance to accelerated weathering 500 hours (for type 2 only), Annexure L)	30000.0
Table 1 (Flexibility (for type 2 only), (IS 101 (Part 5 /sec 2 )))	600.0
Table 1 (VOC, percent, (IS 101 (Part 2 /sec 4)))	2000.0
Table 1 (Resistance to wear, Annexure M)	3000.0
5.4 (Lead Restriction (IS 101 (Part 8/Sec 5), or by Atomic Absorption Spectrometer (AAS) or by ICP.))	1000.0

1368

National Test House (ER), Kolkata

IS 17875 (2022) - Stainless Steel Seamless Pipes and Tubes for General Services

Stainless Steel Seamless Pipes and Tubes for General Services

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Tensile Strength)	1000.0
10.1 (Yield Strength)	1000.0
10.1 (Percent Elongation)	1000.0
23 (Outside Diameter)	500.0
21 (Workmanship, Finish, and Appearance)	1000.0
12 (HARDNESS TEST FOR TUBES)	2000.0
13 (FLARING TEST (FOR TUBES ONLY))	1500.0
23 (Wall Thickness)	500.0
15 (Micro Structure Austenitic Grain Size)	3000.0
17 (Hydraulic Pressure Test)	5000.0
18 (Inter-Granular Corrosion Test)	10000.0
8 (Chemical Composition)	5000.0
8.1 & 8.2 (Carbon) (Carbon (as C))	1000.0
8.1 & 8.2 (Manganese) (Manganese (as Mn))	1000.0
8.1 & 8.2 (Silicon) (Silicon (as Si))	1000.0
8.1 & 8.2 (Nickel) (Nickel (as Ni))	1000.0
8.1 & 8.2 (Chromium) (Chromium (as Cr))	1000.0
8.1 & 8.2 (Molybdenum) (Molybdenum (as Mo))	1000.0
8.1 & 8.2 (Sulphur) (Sulphur (as S))	1000.0
8.1 & 8.2 (Phosphorus) (Phosphorus (as P))	1000.0
8.1 & 8.2 (Copper) (Copper (as Cu))	500.0
8.1 & 8.2 (Nitrogen) (Nitrogen (as N))	500.0
8 (CHEMICAL COMPOSITION, C,Si,Mn,Ni,Cr, Mo, S,P,N,Cu ,Others)	5000.0

1369

National Test House (ER), Kolkata

IS 17876 (2022) - Stainless Steel Welded Pipes and Tubes for General Services - Specification

Stainless Steel Welded Pipes and Tubes for General Services - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clauses 8.1 and 8.2 (Carbon (as C))	1000.0
Clauses 8.1 and 8.2 (Silicon (as Si))	1000.0
Clauses 8.1 and 8.2 (Manganese (as Mn))	1000.0
Clauses 8.1 and 8.2 (Nickel (as Ni))	1000.0
Clauses 8.1 and 8.2 (Chromium (as Cr))	1000.0
Clauses 8.1 and 8.2 (Molybdenum (as Mo))	1000.0
Clauses 8.1 and 8.2 (Sulphur (as S))	1000.0
Clauses 8.1 and 8.2 (Phosphorus (as P))	1000.0
10.1 (Tensile Requirement - Tensile Strength as per IS 1608 Part 1 or Test Method specified)	1000.0
10.1 (Tensile Requirement - Yield Strength as per IS 1608 Part 1 or Test Method specified)	1000.0
10.1 (Tensile Requirement - %Percentage of Elongation (on Gauge Length of 50mm) as per IS 1608 Part 1 or Test Method specified)	1000.0
12 (Hardness Test - Rockwell Hardness as per IS 1586 Part 1 / Brinell Hardness as per IS 1500 Part 1 or other Test Method Specified)	2000.0
11 (Transverse Tension Test as per IS 1608 Part 1)	3000.0
13 (Flange Test as per IS 2330 or relevant Test Method Specified)	1500.0
14 (Reverse Flattening Test as per IS 17876 or specified Test Method)	1000.0
16 (Grain Size determined as per IS 4748 or relevant test method specified)	3500.0
18 (Leak Tightness Test by Hydrostatic Test as IS 17876 or relevant test method specified)	2500.0
19 (Corrosion Resistance as per IS 10461 Part 1 or IS 10461 Part2 or relevant test method specified)	10000.0
22 (Workmanship, Finish, and Appearance- Visual Examination as per IS 17876 or relevant Test Method Specified)	1000.0
23 (Repair by Welding or Grinding - Visual Examination as per IS 17876 or relevant Test Method Specified)	1000.0
24 (Dimension Measurement as per IS 17876 or relevant test method Specified)	1000.0
25 (Marking - Visual Examination as per IS 17876)	1000.0
8 (Chemical Composition - Ladle Analysis as per IS 228 and its relevant parts or any other established instrumental/chemical method)	5000.0

1370

National Test House (NR), Ghaziabad

NTH/NR/XR/ILC/TEXTILE (2024) - ILC FOR TEXTILE

ILC FOR TEXTILE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1964 (Weight (GSM))	-
IS 1954 (Width of Fabric)	-
IS 1969 (Part-1) (Breaking Strength, MD)	-
IS 1969 (Part-1) (Breaking Strength, CMD)	-
IS 1963 (Threads per unit length, Ends)	-
IS 1963 (Threads per unit length, Picks)	-

1371

National Test House (ER), Kolkata

Custom/Paint-RPPT/2024 (2024) - Custom/Paint-RPPT/2024

Custom/Paint-RPPT/2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Tensile Strength)	2000.0
2.0 (Elongation)	1000.0
3.0 (Hardness(Shore A))	1000.0
4.0 (Water Absorption)	2000.0
5.0 (Adhesion Test on Concrete)	1200.0
6.0 (Viscosity (Brookfield))	1200.0
7.0 (Dry Film Material Softening Point)	2000.0
8.0 (Specific gravity)	1500.0
9.0 (Solid Content)	1200.0
12 (Solid by weight %)	1200.0
11 (Touch drying time)	1200.0
13 (Moisture vapour transmission, g/sq.m/24 hrs)	5000.0
10 (Density, gm/cc)	1200.0
14 (Accelerated Weathering Test QUV, 500 hours.)	25000.0

1372

National Test House (NER), Guwahati

MORTH : Part 5 (2013) - SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Density DAC (Density of Dense Asphaltic Concrete.)	2000.0
Density of SDAC (Density of Semi Dense Asphaltic Concrete)	2000.0
Clause 1 Table 1 (Cutting & Preparation of Core sample -Double Stage)	1000.0
507 (Thickness of Bituminous Concrete Layer (BC), in mm)	1000.0
507 (Thickness of DBM Layer (BC), in mm)	1000.0
505 (Thickness of Dense Bituminous Macadam (DBM), in mm)	1000.0
505 (Combined Density of Dense Bituminous Macadam (DBM) & BC, in g/cc)	2000.0
507 (Density / Bulk Specific Gravity of BC ( AASHTO T 166 (21)),)	2000.0
505 (Density / Bulk Specific Gravity of DBM (AASHTO T 166))	2000.0

1373

National Test House (NER), Guwahati

IS 13871 (2021) - Powder Coating

Powder Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clauses 6.6 and 9.1 (Dry film thickness in microns)	1000.0

1374

National Test House (NR), Ghaziabad

IS 1875 (1992) - Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Carbon)	1000.0
6 (Silicon)	1000.0
6 (Manganese)	1200.0
6 (Phosphorus)	1000.0

1375

National Test House (NR), Ghaziabad

IS 10748 (2004) - Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 & 7.2 (Carbon)	1500.0
7.1 & 7.4 (Sulphur)	1000.0
7.1 & 7.5 (Phosphorus)	1000.0
7.1 & 7.3 (Manganese)	1500.0
7.1 & 7.6 (CE)	5000.0

1376

National Test House (Satellite Centre), Varanasi

ASTM D-5147 & ASTM D-36 (2022) - Modified Bituminous Sheet Materials

Modified Bituminous Sheet Materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Thickness)	1000.0
6 (Tensile Strength (Longitudinal))	1000.0
6 (Tensile Strength (Transverse))	1000.0
7 (Tear Strength (Longitudinal))	1500.0
7 (Tear Strength (Transverse))	1500.0
8.0 (Softening Point)	1000.0
11 (Low-Temperature Flexibility at -2°C)	2000.0
11.0 (Low - Temperature Flexibility)	2000.0

1377

National Test House (ER), Kolkata

IS 14252 (2015) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Ash Content)	2000.0
4 (Avg. Breaking Strength of fabric after UV exposure)	2000.0
4 (Elongation at break of fabric, Widthwise)	500.0
4 (Elongation at break of fabric, Lengthwise)	500.0
4 (Average Breaking Strength of bottom seam)	2000.0
4 (Avg. Breaking Strength of fabric, Widthwise)	1000.0
4 (Avg. Breaking Strength of fabric, Lengthwise)	1000.0
4 (Mass of Sack (without tying cord))	1000.0
4 (Picks/dm)	500.0
4 (Ends/dm)	500.0
4 (Dimensions, Outside Width)	500.0
4 (Dimensions, Outside Length)	500.0
4 (Mass of Bale)	2000.0
3.4.1 (Mouth of Sack, Channel secured with )	2000.0
3.4.1 (Mouth of Sack, Channel withturn-in)	2000.0
3.3 (Tying cord Material Identification)	2000.0
3.4.1 (Mouth of Sack, Channel width)	2000.0
3.4.1 (Bottom Seam, Number of Stitchs per dm)	2000.0
3.4.1 (Bottom Seam, Double fold seam depth)	2000.0
3.4.1 (Bottom Seam, Outer stitch distance from outer edge)	2000.0
3.4.1 (Bottom Seam, Two row separation distance)	2000.0
4 (UV - Resistance Test (192 hrs.))	9600.0
4 (GSM of Fabrics)	1000.0

1378

National Test House (NR), Ghaziabad

ICF Drg.No. ICF/STD-6-4-028 Alt a - CUSTOM STANDARDS FOR NWR AJMER

CUSTOM STANDARDS FOR NWR AJMER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CLAUSE-A,Table-1 (Nylon Wire Bottle Holder For Non AC Coaches (Colour Blue) Please see the Annexure)	10000.0
CLAUSE-A,Table-1 (Eyelet with plain washer Item no.4 IS:410-67 Cu Zn 37(Lab no. 20/24) Please see the Annexure)	10000.0

1379

National Test House (SR), Chennai

CUS/SR/Chem (2024) - Custom Standard for Metal Samples

Custom Standard for Metal Samples

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon)	1000.0
2 (Manganese)	1000.0
3 (Sulphur)	1000.0
4 (Phosphorous)	1000.0
5 (Silicon)	1000.0
6 (Copper (as Cu))	1000.0
7 (Nickel (as Ni))	1000.0
Custom (Chemical composition - IS 9879:1998.)	5000.0
Custom (Chemical Composition for Metal samples)	5000.0

1380

National Test House (SR), Chennai

CUS/SR/NDT/CUSTOM/001 (2024) - Welding wire

Welding wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Size of Wire)	1000.0
2.0 (Type of Wire)	2000.0