NTH - Management Information System

Search by Standard No.

Reset

4129 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3091

National Test House (NR), Ghaziabad

IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Nominal Mass)	1500.0
6.1 (Nominal Diameter )	1000.0
6.2.3 (Elongation)	1000.0
6.2.2 (0.2% Proof Load)	1000.0
6.2.2 (Breaking Strength)	3000.0
4.2 (Length of lay)	1000.0
4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.)	1000.0
4.1 (Phosphorus, % by mass)	600.0
4.1 (Sulphur, % by mass)	600.0
4.5 (Workmanship and Finish)	1000.0
6.1 (Nominal Area )	1000.0
4.1.2 (Chemical composition (Annexure for NABL parameters))	3500.0
4 (Chemical composition (Annexure for non-NABL parameters))	3000.0
Table 2 (Cl 6.2.1, Cl 6.2.2, Cl 6.3) (0.2% Proof Load, Breaking Strength of Strand, Total Elongation.)	3000.0
Note 1 (Modulus of Elasticity, N/mm2)	1000.0

3092

National Test House (SR), Chennai

IS 2365 (2018) - Steel Wire Suspension Ropes for Lifts, Elevators and Hoists

Steel Wire Suspension Ropes for Lifts, Elevators and Hoists

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Breaking load)	10000.0

3093

National Test House (SR), Chennai

CUS/SR/MECH-8 - Composite Sandwich Shutter

Composite Sandwich Shutter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3094

National Test House (SR), Chennai

CUS/SR/MECH-7 - Composite Plug

Composite Plug

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Minimum tensile load)	4000.0
2.0 (Minimum compression load)	4000.0

3095

National Test House (SR), Chennai

CUS/SR/MECH-6 - Composite Chequered Plate

Composite Chequered Plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	3000.0
2.0 (Breaking load)	3000.0

3096

National Test House (SR), Chennai

CUS/SR/MECH-5 - Composite Groove Channel

Composite Groove Channel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	3000.0
2.0 (Breaking load)	3000.0

3097

National Test House (SR), Chennai

CUS/SR/MECH-4 - Composite Top Beam

Composite Top Beam

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	4000.0
2.0 (Breaking load)	3000.0

3098

National Test House (SR), Chennai

CUS/SR/MECH-3 - Composite Top Channel

Composite Top Channel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	4000.0
2.0 (Breaking load)	3000.0

3099

National Test House (NR), Ghaziabad

RDSO IRS S 63/2014 : Part 0 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling

PVC Insulated,underground, unscreened cable for Railway Signalling

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3100

National Test House (NR), Ghaziabad

IS 5410 (2013) - Cement paint - Specification (Second Revision)

Cement paint - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.8 ix (Recoating properties)	1200.0
4.8 viii (Pot life of mixed paint)	1200.0
4.8 vii (Water repellency)	1200.0
4.8 vi (Resistance to dry rubbing)	1200.0
4.8 v (Residue on sieve % by mass)	1200.0
4.8iii (Colour)	1200.0
4.8 ii (Finish)	1200.0
4.8 i (Drying time Hard dry)	1200.0
4.7 (Keeping properties)	5000.0
Cl 4.4 (Lead Restriction)	1200.0
Cl 4.1 (Composition)	3500.0

3101

National Test House (NR), Ghaziabad

Berger Customer Specification -NTH ER Paint 1 (2022) - Berger Customer Specification -NTH ER Paint 1

Berger Customer Specification -NTH ER Paint 1

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Shelf life @ 30 °C For 12 Months both liquid and powder)	10000.0

3102

National Test House (NR), Ghaziabad

Custom specification Paint coating - Custom specification Paint coating Fire retardant test as per customer requirement

Custom specification Paint coating Fire retardant test as per customer requirement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification for paint coating (Surface flame spreading/fire retardant test for 0 -1 hour)	3000.0
Custom specification for paint coating (surface flame spreading/fire retardant test for 1 - 2 hours)	5000.0

3103

National Test House (NR), Ghaziabad

IS 1964:2001 (2001) - Methods for Determination of Mass per Unit Lenght and Mass per Unit Area of Fabrics

Methods for Determination of Mass per Unit Lenght and Mass per Unit Area of Fabrics

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Method-A (Grammage of Fabric (GSM))	1000.0

3104

National Test House (ER), Kolkata

IS 1730 (1989) - Dimensions for steel plates,sheets strips and flats for general engineering purposes

Dimensions for steel plates,sheets strips and flats for general engineering purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3105

National Test House (ER), Kolkata

ER-LP-Intensity-01 - Peak Intensity measurement at different Mode.

Peak Intensity measurement at different Mode.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Peak Intensity measurement at Single Mode, on the lines of IS - 16106 : 2012)	10000.0
A2 (Peak Intensity measurement at Dual Mode , on the lines of IS - 16106 : 2012)	20000.0
A3 (Peak Intensity measurement at Triple Mode , on the lines of IS - 16106 : 2012)	30000.0

3106

National Test House (NR), Ghaziabad

IRS S 63 (2014) - PVC Insulated underground unsereened cable for railway signaling

PVC Insulated underground unsereened cable for railway signaling

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6 (Dimensions of Signaling Cable)	500.0
5.7 (Conductor Resistance Signaling Cable)	1000.0
5.8 (Tensile Strength of Armour)	1000.0
5.1 (Thickness of inner sheath)	500.0
5.1 (Thickness of Outer Sheath)	500.0
5.8 (Dimension of Armour ( Signaling Cable))	500.0
5.8 (Percentage (%) elongation Armour tape(signaling Cable))	500.0
5.8 (Percentage (%) elongation Armour wire(signaling Cable))	500.0
5.8.6 (Resistivity on Armour ( Signaling Cable))	1000.0
5.1 (Tensile Strength of Insulation before ageing)	500.0
5.1 (Tensile Strength of Insulation after ageing)	1000.0
5.10.2 (Percentage (%)Shrinkage)	1000.0
5.10.4 (Loss of Mass of Insulation and sheath)	1000.0
5.10.4 (Loss of Mass of Insulation and sheath)	1000.0
5.10.11 (Thermal stability of Insulation and Sheath)	1000.0
5.11 (Period of burning after removal of flame)	1000.0
5.11 (Decomposed length of sample)	1000.0
5.12 (High Voltage in Air 4 kV AC)	1000.0
5.13.3 (Insulation Resistance in Air ( Signaling Cable))	1000.0
5.14 (AC High Voltage Test 8 kV( Water Immersion))	1000.0

3107

National Test House (NR), Ghaziabad

RDSO IRS S 63/2015 : Part 1 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling

PVC Insulated,underground, unscreened cable for Railway Signalling

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3108

National Test House (SR), Chennai

CUS/SR/MECH-2 - Shear plate

Shear plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Breaking load)	3000.0

3109

National Test House (SR), Chennai

IS 16532: 2017 (2017) - APP Modified Bituminous Waterproofing and Damp Proofing Membrane with Polyester Reinforcement

APP Modified Bituminous Waterproofing and Damp Proofing Membrane with Polyester Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6..0 (Thickness)	1000.0
6.0 (Cold Flexibility)	2000.0

3110

National Test House (ER), Kolkata

CUSTOMER SPECIFICATION CHEMICAL PAINT NTH ER (2022) - CUSTOMER SPECIFICATION CHEMICAL PAINT NTH ER ASIAN PAINTS

CUSTOMER SPECIFICATION CHEMICAL PAINT NTH ER ASIAN PAINTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Specific Gravity)	1000.0
2 (Volume solids ,% by mass)	1000.0
3 (Zinc content,% by mass)	1500.0
4 (Drying time ,Touch Dry)	500.0
5 (Drying time Full cure)	500.0
6 (Adhesion Test (cross-cut))	700.0
7 (Adhesion Pull Off (ASTM D 4541))	4000.0
8 (Storage stability (pot life))	2000.0

3111

National Test House (ER), Kolkata

IRC-83 (1987) - Elastomeric Bearings

Elastomeric Bearings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
915.1 (Identification of polymer)	3000.0
915.1.3(i) (Ash Content)	2000.0
915.13(ii) (Polychloroprene Conetnt)	4000.0
915.2(1.1) (Hardness)	1000.0
915.2(1.2) (Tensile Strength)	2000.0
915.2(1.3) (Elongation at Break)	1000.0
915.2(2) (Compression set)	3000.0
915.2(3.1) (Change in Hardness)	2000.0
915.2(3.2) (Change in Tensile Strength)	3000.0
915.2(3.3) (Change in Elongation)	1000.0
915.2.2 (Adhesion Strength of Elastomer to Laminate)	3000.0
916.2.2(iii) (Thickness of individual elastomer layer)	1000.0
916.2.2(iv) (Thickness of Outer Layer)	1000.0
916.2.2(v) (Number of Internal Layers of Elastomer)	500.0
916.2.2(vii) (Thickness of Steel Laminates)	500.0
12.0 (Ultimate Compressive strength)	6000.0

3112

National Test House (ER), Kolkata

RDSO SPEC/E. NO. SPEC/E-7/17-REV1 (2004) - Resin Pre-Impregnated Semi-Cured Unidirectional Glass Banding Tape

Resin Pre-Impregnated Semi-Cured Unidirectional Glass Banding Tape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Identification of Resin)	5000.0

3113

National Test House (ER), Kolkata

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103) (1991 RA 2018) - Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (i) (Dry material content % by mass)	1000.0
9 (ii) (Ash Content % by mass)	1000.0
9(iii) (Relative density)	1000.0
9 (iv) (Chloride ion content % by mass)	1000.0
9 (v) (PH)	1000.0

3114

National Test House (WR), Mumbai

IS 9537 ( Part 3) (1983) - Specification for conduits for electrical installations ( Part 3) rigid plain conduits of insulating materials.

Specification for conduits for electrical installations ( Part 3) rigid plain conduits of insulating materials.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14.1 (All tests constituted under type tests)	12500.0
14.2 (All tests constituted under acceptance tests)	8000.0
12.0 (ELECTRICAL CHARACTERISTICS:- Insulation Resistance)	2000.0
6.2 (Durability of Marking)	1000.0
7.4 (Uniformity of Wall Thickness)	1000.0
8.0 (Construction)	1000.0

3115

National Test House (NR), Ghaziabad

IS:3025 - Methods of sampling and test (Physical & chemical) for water and waste water

Methods of sampling and test (Physical & chemical) for water and waste water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CL 8 (Part 44,58,11,16 &17 ) Essential Parameters (Please see Annexure)	12000.0
6,Table1 ICP-OES Elements (Please see Annexure)	7000.0
Cl 8 Essential Parameters as per NMCG Requirement (Cl 8 -Essential Parameters as per NMCG Requirement (Please see Annexure))	10000.0
APHA-23 edition Microbiological Parameters as per NMCG(Please see Annexure) (APHA-23 edition Microbiological Parameters as per NMCG(Please see Annexure))	2000.0

3116

National Test House (NR), Ghaziabad

IS 13730(Part-9):1994,Reaffirmed 2005. (1994) - Specification for Particular Types of Winding Wires:Polyester Enamelled Round Aluminium Wire, Class 130

Specification for Particular Types of Winding Wires:Polyester Enamelled Round Aluminium Wire, Class 130

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Electrical Resistance)	2000.0
6 (Elongation)	9000.0
9 (Heat Shock)	500.0
1 (1)	-
Tests (i)Measurement of diameter of conductor, ii)Measurement of increase in diameter,iii)Measurement of overall diameter,iv)Mandrel Winding Test,v)Weight check.)	4500.0

3117

National Test House (WR), Mumbai

IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17.3 (Marking)	-
15.4 (Armour resistance test for mining cables)	2500.0
15.4 (Cold impact test)	1500.0
15.4 (Cold bend test)	1000.0
15.2 (a) (Annealing test ( for copper ))	-
15.1 (a) ii (Tensile Test )	500.0
15.1 (a) iii (Wrapping test)	500.0
15.3 (a) (Conductor resistance-Red )	500.0
15.1 (b) 1 (Dimensions)	1000.0
15.1 (b) 2 i (Tensile strength)	500.0
15.1 (b) 2 ii (Elongation at break)	1000.0
15.1 (b) 2 iii (Torsion test for round wires)	500.0
15.1 (b) 2 iv (Winding test for formed wire)	1000.0
15.1 (b) 2 v (Uniformity of Zinc Coating)	1000.0
15.1 (b) 2 vi (Mass of Zinc coating)	2000.0
15.1 (b) 2 vii (Resistivity)	250.0
15.1.C (Average thickness of sheath)	250.0
15.1.C (Average thickness of insulation)	250.0
15.1.C (Minimum thickness of sheath)	250.0
15.1.C (Minimum thickness of insulation)	250.0
15.1.d i (Tensile strength at break-R)	250.0
15.1.d i (Tensile strength at break-R)	250.0
15.1.d iii (Hot set test-Elongation under load-R)	250.0
15.1.d iii (Hot set test-Permanent elongation after cooling-R)	250.0
15.1.d.iv (Shrinkage test-R)	250.0
15.1.d.v (Water ahsorption (Gravimetric))	250.0
15.1.e iii (Loss of mass in air oven)	500.0
15.1.e i (Tensile strength at break)	250.0
15.1.e i (Elongation at break)	1000.0
15.1.e iii (Loss of mass in air oven)	500.0
15.1.e iv (Shrinkage test)	500.0
15.1.e vi (Hot deformation test Depth of indentation,)	500.0
15.1.e vi (Heat shock test)	1000.0
15.1.e vii (Thermal stability)	500.0
15.1.f (Volume resistivity at ambient temperature-R)	500.0
15.2 (g) (Volume resistivity at maximum rated temperature )	500.0
15.1.g (High Voltage test at room temperature)	250.0
15.1.h (Flammability Test)	250.0
15.1.1.c1 (a) (Oxygen index )	3500.0
15.1.1.c1 (b) (Flame retardance test on single cable)	3500.0
15.1.1.c2 (c) (Flame retardance test on bunched cable)	3500.0
15.1.1.c1 (d) (Temperature index)	3500.0
15.1.1.c2 (d) (Optical density of smoke)	3500.0
15.1.1.c2 (f) (Halogen acid gas evaluation)	3500.0
3.1 (Conductor)	100.0
4.1 (Insulation)	100.0
5.1 (FILLER AND INNER SHEATH)	100.0
5.2 (Filler and inner sheath)	100.0
6.1 (Armouring)	100.0
7.1 (Outer Sheath)	100.0
8.1 (Conductor)	100.0
8.2 (Conductor)	250.0
8.3 (Size of Neutral Conductor)	-
9.1 (Insulation)	100.0
9.2 (Insulation)	250.0
9.3 (Insulation)	250.0
9.4 (Insulation)	100.0
10.1 (Core Identification)	100.0
10.2 (CORE IDENTlFICATION)	100.0
10.3 (CORE IDENTlFICATION)	100.0
11.1 (LAYING UP Of CORES)	100.0
12.1 (Inner sheath(Common covering))	100.0
12.2 (Inner sheath(Common covering))	100.0
12.3 (Inner sheath(Common covering))	250.0
13.1 (Armouring)	100.0
13.3 (Armouring)	250.0
13.4 (ARMOURING)	100.0
14.1 (Outer Sheath)	100.0
14.2 (Outer Sheath)	250.0
14.3.1 (Outer Sheath)	1000.0
15.1 (a) iv (Resistance of conductor-Black)	1000.0

3118

National Test House (WR), Mumbai

Custom/Mech/2022 (2022) - Specification for Customer Test request.

Specification for Customer Test request.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
M1 (Shear Strength test, MPa)	3000.0

3119

National Test House (WR), Mumbai

IS : 7098(Part 1)1988, Reaff 2020 Amdt-5 (1988) - Specification for Cross linked Polyethylene Insulated PVC Sheathed Cable Part 1 for working voltage upto and Including 1100Volt

Specification for Cross linked Polyethylene Insulated PVC Sheathed Cable Part 1 for working voltage upto and Including 1100Volt

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Type Test)	40000.0
15.2 (Acceptance Test)	20000.0

3120

National Test House (NR), Ghaziabad

MDTS : 094 Rev:01 (2002) - TECH SPECIFICATIONS FOR PAINTING SYSTEM FOR PASSENGER COACHES BUILT AT RCF,KAPURTHALA

TECH SPECIFICATIONS FOR PAINTING SYSTEM FOR PASSENGER COACHES BUILT AT RCF,KAPURTHALA

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl No. 3.1 FOR PRIMER (Epoxy metal primer) (Please see Annexure)	25000.0
Cl No. 3.2 FOR Polyester based Kniffing Putty (Please see Annexure)	8000.0
Cl No. 3.3 FOR Two component PUR PRIMER (Please see Annexure)	25000.0
Cl No. 3.4 FOR Two component POLYURETHANE UNDERCOAT( PRIMING PAINT)PURER (Please see Annexure)	12000.0
Cl No. 3.5 FOR Two component PUR POLYURETHANE BASED TOP COAT (Please see Annexure)	35000.0
Cl No. 3.6 FOR Two component EpoxyHigh Build Paint ElastifiedR (Please see Annexure)	40000.0