| 3151 |
National Test House (SR), Chennai
| IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17 & 18 (Identification, Packing & Marking) |
- |
|
| 17.3 (Marking) |
- |
|
| 15.1.C (Minimum thickness of insulation) |
250.0 |
|
| 15.1.C (Minimum thickness of sheath) |
250.0 |
|
| 15.2 (e) (Average thickness of insulation) |
250.0 |
|
| 15.2 (e) (Average thickness of sheath) |
250.0 |
|
| 13.3 (ARMOURING) |
100.0 |
|
| 15.1.d i (Elongation at break-Black) |
250.0 |
|
| 15.1.d i (Elongation at break-B) |
250.0 |
|
| 15.1.d i (Elongation at break-Y) |
250.0 |
|
| 15.1.d i (Elongation at break-R) |
250.0 |
|
| 15.1.d i (Tensile strength at break-R) |
250.0 |
|
| 15.1.d i (Tensile strength at break-Y) |
250.0 |
|
| 15.1.d i (Tensile strength at break-B) |
250.0 |
|
| 15.1.d i (Tensile strength at break-Black) |
250.0 |
|
| 15.1.d ii (Elongation at break-Black) |
250.0 |
|
| 15.1.d ii (Elongation at break-B) |
250.0 |
|
| 15.1.d ii (Elongation at break-Y) |
250.0 |
|
| 15.1.d ii (Elongation at break-R) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-Black) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-B) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-Y) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Black) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Black) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-R) |
250.0 |
|
| 15.1.e ii (Elongation variation) |
1000.0 |
|
| 15.1.e ii (Tensile strength variation) |
1000.0 |
|
| 15.1.e i (Elongation at break) |
1000.0 |
|
| 15.1.e i (Tensile strength at break) |
250.0 |
|
| 15.3 (a) (Conductor resistance-Black ) |
2000.0 |
|
| 15.3 (a) (Conductor resistance-Blue) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Yellow ) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Red ) |
500.0 |
|
| 15.2 (c) (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.2.1.c2 (a) (Oxygen index ) |
3500.0 |
|
| 15.1 (a) ii (Tensile Test ) |
500.0 |
|
| 15.1.1.g (Temperature index) |
1000.0 |
|
| 15.2.1.c2 (d) (Halogen acid gas evaluation) |
3500.0 |
|
| 15.1.1.c2 (d) (Optical density of smoke) |
3500.0 |
|
| 15.2 (a) (Annealing test ( for copper )) |
- |
|
| 15.1 (a) i (Annealing test) |
1000.0 |
|
| 15.1 (Test on extra cores, Four core) |
6000.0 |
|
| 15.1 (Test on extra cores, three core) |
4000.0 |
|
| 15.1 (Test on extra cores, two core) |
2000.0 |
|
| 15.2 (c) (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Black) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-B) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-R) |
500.0 |
|
| 15.1 (a) ii (Tensile Test ) |
500.0 |
|
| 15.1.g (High Voltage test at room temperature) |
2000.0 |
|
| 15.3 (a) (Conductor resistance-Black ) |
2000.0 |
|
| 15.3 (a) (Conductor resistance-Blue) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Yellow ) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Red ) |
500.0 |
|
| 15.4 (Cold bend test) |
1000.0 |
|
|
| 3152 |
National Test House (ER), Kolkata
| EURAMET cg - 2 (2011) - CALIBRATION OF GAUGE BLOCK COMPARATORS |
CALIBRATION OF GAUGE BLOCK COMPARATORS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Length) |
15000.0 |
|
|
| 3153 |
National Test House (ER), Kolkata
| ASTM D2240 (2015) - Standard Test Method for Rubber Property—Durometer Hardness |
Standard Test Method for Rubber Property—Durometer Hardness |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Force) |
5000.0 |
|
|
| 3154 |
National Test House (ER), Kolkata
| ASTM D88 (1994) - Standard Test Method for Saybolt Viscosity |
Standard Test Method for Saybolt Viscosity |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Dimension) |
5500.0 |
|
|
| 3155 |
National Test House (ER), Kolkata
| SANAS TR 45-03 (2023) - CRITERIA FOR LABORATORIES ACCREDITED TO CALIBRATE TACHOMETERS AND MEASURE ROTATIONAL SPEED |
CRITERIA FOR LABORATORIES ACCREDITED TO CALIBRATE TACHOMETERS AND MEASURE ROTATIONAL SPEED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Speed) |
2500.0 |
|
|
| 3156 |
National Test House (ER), Kolkata
| DKD-R 6-1 (2014) - Calibration of Pressure Gauges |
Calibration of Pressure Gauges |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Pressure) |
3000.0 |
|
| 7 (Pressure) |
3000.0 |
|
| 7 (Pressure) |
1200.0 |
|
|
| 3157 |
National Test House (ER), Kolkata
| OIML R 76-1 (2006) - Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests |
Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Weighing balance calibration) |
4000.0 |
|
| 3 (Weight) |
4000.0 |
|
|
| 3158 |
National Test House (ER), Kolkata
| OIML R 111-1 (2004) - Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3
Part 1: Metrological and technical requirements |
Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3
Part 1: Metrological and technical requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Mass (1mg to 200g)) |
4000.0 |
|
| 5 (Mass (500g-5kg)) |
4000.0 |
|
| 5 (Mass) |
4000.0 |
|
| 5 (Mass, g) |
1200.0 |
|
|
| 3159 |
National Test House (ER), Kolkata
| Custom-5-NTH-LM - Wire Mesh Panel |
Wire Mesh Panel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Width) |
200.0 |
|
| 2 (Height) |
200.0 |
|
| 3 (Bend Test) |
1000.0 |
|
| 4 (Panel Weight) |
500.0 |
|
| 5 (Tensile Strength of wire) |
2000.0 |
|
| 6 (Weld Shear Strength) |
3000.0 |
|
| 7 (Mass of Zinc Coating) |
2000.0 |
|
| 8 (Powder Coating Thickness) |
2000.0 |
|
| 9 (Salt Spray Test for 1000 Hours) |
50000.0 |
|
| 18 (Sulphur + Phosphorus) |
500.0 |
|
| 18 (Phosphorus) |
500.0 |
|
| 17 (Sulphur) |
500.0 |
|
| 16 (Carbon) |
500.0 |
|
| 15 (Elongation of wire) |
1000.0 |
|
| 14 (Wrapping Test for Ductility) |
2000.0 |
|
| 13 (Ultimate Tensile Strength of wire) |
2000.0 |
|
| 12 (Unit Weight) |
500.0 |
|
| 11 (Mesh Size (c/c)) |
300.0 |
|
| 10 (Diameter of Wire) |
500.0 |
|
| 19 (Uniformity of Coating) |
500.0 |
|
| 0 (Powder Coating Thickness Test) |
2000.0 |
|
| 2 (Adhesion test for coating) |
2000.0 |
|
|
| 3160 |
National Test House (ER), Kolkata
| Custom-4-NTH-LM - Omega Clamp/Profile Plate |
Omega Clamp/Profile Plate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
500.0 |
|
| 2 (Width) |
500.0 |
|
| 3 (Thickness) |
500.0 |
|
| 4 (Weight) |
1000.0 |
|
| 5 (Mass of Zinc Coating) |
2000.0 |
|
| 6 (Uniformity of Coating) |
1000.0 |
|
| 7 (Powder Coating Thickness) |
1000.0 |
|
| 8 (Salt Spray Test for 1440 Hours) |
72000.0 |
|
|
| 3161 |
National Test House (ER), Kolkata
| Custom-3-NTH-LM - Concertina coil/PTCC |
Concertina coil/PTCC |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Diameter of wire, mm) |
1000.0 |
|
| 2 (Blade Length) |
1000.0 |
|
| 3 (Center to center distance between blade) |
1000.0 |
|
| 4 (Thickness of Blade) |
1000.0 |
|
| 5 (Tensile Strength of wire) |
3000.0 |
|
| 6 (Yield Stress of wire) |
1000.0 |
|
| 7 (Percentage Elongation of wire) |
1000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 8 (Sulphur) |
500.0 |
|
| 8 (Phosphorus) |
500.0 |
|
| 8 (Chromium) |
1000.0 |
|
| 8 (Manganese) |
500.0 |
|
| 8 (Nickel) |
500.0 |
|
| 8 (Silicon) |
500.0 |
|
| 9 (Mass of Zinc Coating of wire) |
1000.0 |
|
| 11 (Unit Weight) |
1000.0 |
|
| 0 (Diameter of Concertina Coil, mm) |
1000.0 |
|
| 0 (No. of Loops) |
1000.0 |
|
|
| 3162 |
National Test House (ER), Kolkata
| Custom-2-NTH-LM - Straining/Intermediate Y arm |
Straining/Intermediate Y arm |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Leg Length) |
500.0 |
|
| 2 (Thickness) |
500.0 |
|
| 3 (General Dimensions) |
1000.0 |
|
| 4 (Tensile Strength) |
1500.0 |
|
| 5 (Yield Strength) |
1500.0 |
|
| 6 (Percentage Elongation) |
1000.0 |
|
| 8 (Mass of Zinc coating) |
1000.0 |
|
| 9 (Uniformity of coating) |
500.0 |
|
| 10 (Powder Coating) |
1000.0 |
|
| 7 (Carbon) |
500.0 |
|
| 7 (Sulphur) |
500.0 |
|
| 7 (Phosphorus) |
500.0 |
|
| 7 (Manganese) |
500.0 |
|
| 7 (Silicon) |
500.0 |
|
| 7 (Carbon equivalent) |
500.0 |
|
| 11 (Salt Spray Test for 1440 Hours) |
72000.0 |
|
|
| 3163 |
National Test House (ER), Kolkata
| Custom-1-NTH-LM - Fence Post Hollow Section and Fence Post Support Strip |
Fence Post Hollow Section and Fence Post Support Strip |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Diameter of Post) |
1000.0 |
|
| 2 (Thickness) |
500.0 |
|
| 3 (Nominal Mass) |
1000.0 |
|
| 4 (Tensile Strength) |
1000.0 |
|
| 5 (Yield Strength) |
1000.0 |
|
| 6 (Percentage Elongation at 5.65 √area) |
1000.0 |
|
| 7 (Mass of Zinc Coating) |
1000.0 |
|
| 8 (Uniformity of coating) |
500.0 |
|
| 9 (Powder coating thickness) |
1000.0 |
|
| 10 (Salt Spray Test for 1440 Hours) |
72000.0 |
|
| 11 (Dimension of Fence Post Support Strip and anchor Rode) |
2000.0 |
|
| 9.1 (Powder coating thickness) |
1000.0 |
|
| 0 (Chemical Composition, % by mass) |
3000.0 |
|
| 11.3.2 (Flattening Test) |
1000.0 |
|
|
| 3164 |
National Test House (SR), Chennai
| CUS/SR/MECH-1 - Colour coated Galvalume profile sheet |
Colour coated Galvalume profile sheet |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Total coated thickness, mm) |
1000.0 |
|
| 2.0 (Tensile strength, MPa) |
1000.0 |
|
| 2.0 (Yield strength, MPa) |
1000.0 |
|
| 2.0 (Percentage Elongation in 50mm gauge length, %) |
1000.0 |
|
| 4.0 (Chemical composition, % by mass) |
2000.0 |
|
| 5.0 (Coating thickness of inner and outer layers) |
4500.0 |
|
| 3.0 (Mass of zinc coating (Triple spot & Single test)) |
3000.0 |
|
| 1.0 (Base metal thickness) |
- |
|
| 6.0 (Dimensions, mm) |
2000.0 |
|
| Custom (Dimensional Stability) |
2000.0 |
|
| Custom (Uniformity of Zinc coating) |
1000.0 |
|
|
| 3165 |
National Test House (NER), Guwahati
| IS 15961 (2025) - Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet - Specification |
Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Thickness of Sheet (base metal thickness), mm) |
1000.0 |
|
| 3.3 (Coated thickness (total coated thickness), mm) |
1000.0 |
|
| 9.1 (Mass of coating (Both sides), g/Sq m) |
2000.0 |
|
| 7.1 (Carbon. percent) |
500.0 |
|
| 7.1 (Manganese, percent) |
500.0 |
|
| 7.1 (Sulphur, percent) |
500.0 |
|
| 7.1 (Phosphorous, percent) |
500.0 |
|
| 3.2 (Thickness of Sheet (*Base Metal Thickness), mm.) |
1000.0 |
|
| 3.3 (Coated Thickness (*Total Coated Thickness), mm.) |
1000.0 |
|
| 8.3 (Yield Strength) |
1000.0 |
|
|
| 3166 |
National Test House (NER), Guwahati
| IS 277 (2018) - Galvanized Steel Sheets (Plain and Corrugated) |
Galvanized Steel Sheets (Plain and Corrugated) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Thickness of sheet (uncoated), mm) |
1000.0 |
|
| 5.1 (Carbon, % by mass) |
500.0 |
|
| 5.1 (Manganese, % by mass) |
500.0 |
|
| 5.1 (Sulphur, % by mass) |
500.0 |
|
| 5.1 (Phosphorous, % by mass) |
500.0 |
|
| 7 (Mass of Zinc Coating) |
2000.0 |
|
| 3.3 (Thickness of Sheet) |
1000.0 |
|
| 7 (Mass of Zinc coating ( Total Both sides)) |
2000.0 |
|
|
| 3167 |
National Test House (WR), Mumbai
| IS / ASTM / DIN / EN / BS - Construction Chemicals used for water proofing / Admixtures |
Construction Chemicals used for water proofing / Admixtures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 9103, Cl. 9 (Aspect (as per IS 9103:1999, Cl. 9)) |
1000.0 |
|
| IS 9103, Cl. 9 (Colour (as per IS 9103:1999, Cl. 9)) |
1000.0 |
|
| IS 9103, Cl. 9 (pH Value (IS 9103:1999, Cl. 9)) |
1000.0 |
|
| IS 3104 (Part 2) (Specific Gravity (IS 3104 (Part II))) |
1000.0 |
|
| IS 101 (Viscosity (IS 101)) |
1000.0 |
|
| ASTM D 7234-12 (Pull-off Adhesion Strength of coating (ASTM D 7234-2012),) |
5000.0 |
|
| ASTM D 7234-12 (Pull-off Adhesion Strength of coating (ASTM D 7234-2012),
a) Control Sample
b) Coated Sample) |
10000.0 |
|
| IS 4031 (Transverse Strength (Flexural Strength) at 28 days (IS 4031 (Part 8)).) |
4000.0 |
|
| DIN (Water Permeability (DIN 1048)) |
10000.0 |
|
| IS 9103, Cl. 9 (Dry Material (IS 9103:1999, Cl 9)) |
1000.0 |
|
| IS 9103, Cl. 9 (Chloride Content (IS 9103:1999)) |
1000.0 |
|
| IS 9103, Cl. 9 (Relative Density (IS 9103:1999)) |
1000.0 |
|
| Cl 7.2.1, IS 9103:1999 (Slump Test (Workability),) |
2000.0 |
|
| Cl 8.2.1, IS 9103:1999 (Compressive Strength, Comparative Compressive Strength (IS 9103:1999), at 7 days) |
5000.0 |
|
| Cl 8.2.1, IS 9103:1999 (Compressive Strength, Comparative Compressive Strength (IS 9103:1999), at 28 days) |
5000.0 |
|
| EN 12390 / DIN 1048 (Water Permeability of Concrete, Comparative (EN 12390), at 28 days) |
10000.0 |
|
| Cl 8.2.3, IS 9103:1999 (Length Change, Percent increase over Control Sample), (IS 9103:1999)) |
2000.0 |
|
| BS 1881- Part 122:1983 (Water Absorption (BS 1881 (Part 122):1983) |
2000.0 |
|
| ASTM D 412 (Tensile Strength (ASTM D 412), N/mm^2) |
2000.0 |
|
| ASTM D 412 (Elongation at Break (ASTM D 412), %) |
2000.0 |
|
| ASTM D 4541 (Pull-off Adhesion Strength of coating (ASTM D 4541-2009),) |
5000.0 |
|
| ASTM D 2370 (Tensile strength and Elongation at break (on the lines of ASTM D 2370)) |
4000.0 |
|
| ASTM C 1059 / 1042 (Bond Strength of Latex (Slant Shear Strength on lines of ASTM C 1042), in N/mm^2) |
5000.0 |
|
| ASTM C 882 (Bond Strength (Slant Shear Strength - on lines of ASTM C 882) after 28 days, in N/mm^2) |
5000.0 |
|
| ASTM C 882 (Bond Strength (Slant Shear Strength - on lines of ASTM C 882) after 14 days, in N/mm^2) |
5000.0 |
|
| EN 196-1 (Flexural Strength after 14 days (on lines of EN 196-1), N/mm^2) |
4000.0 |
|
| ASTM C 109 (Compressive Strength after 1 day (on the lines of ASTM C 109), N/mm^2) |
4000.0 |
|
| ASTM C 109 (Compressive Strength after 3 day (on the lines of ASTM C 109), N/mm^2) |
4000.0 |
|
| ASTM C 109 (Compressive Strength after 14 day (on the lines of ASTM C 109), N/mm^2) |
4.0 |
|
| ASTM C 109 (Compressive Strength after 7 day (on the lines of ASTM C 109), N/mm^2) |
4000.0 |
|
| ASTM C 496 (Splitting Tensile Strength (on the lines of ASTM C 496), N/mm^2) |
4000.0 |
|
| ASTM C 109 (Compressive Strength after 28 day (on the lines of ASTM C 109), N/mm^2) |
4000.0 |
|
| 3.2 a of 2645 (Initial setting Time [Comparision with blank sample (IS 4031 / 2645)], min.) |
1000.0 |
|
| 3.2 b (Final setting Time [Comparision with blank sample (IS 4031 / 2645)], min.) |
1000.0 |
|
| 3.3 a of IS 2645 (Compressive Strength, 3 days [Comparision with blank sample (IS 4031 / 2645)], MPa) |
2000.0 |
|
| 3.3 b of IS 2645 (Compressive Strength, 7 days [Comparision with blank sample (IS 4031 / 2645)], MPa) |
2000.0 |
|
| 3.1 of IS 2645 (Permeability of water [Comparision with blank sample (IS 4031 / 2645)], ml) |
3000.0 |
|
| IS 101 (Volatile Organic Compound [ VOC - as per IS 101]) |
4000.0 |
|
| IS 101 (Toxic Element (Chromium as Cr), by AAS instrumental method.) |
1200.0 |
|
| IS 101 (Toxic Element (Cadmium as Cd), by AAS instrumental method.) |
1200.0 |
|
| IS 2645 (Chloride Content (as per IS 2645 : 2003), %) |
1000.0 |
|
| - - (Wear Resistance Test (on the lines of IS 1237: 2012), loss in mm) |
3000.0 |
|
| IS 101 (Toxic Element (Lead as Pb), by AAS instrumental method.) |
1200.0 |
|
|
| 3168 |
National Test House (SR), Chennai
| IS 2465 (1986) - Cable for Motor Vehicles |
Cable for Motor Vehicles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3169 |
National Test House (SR), Chennai
| IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Material) |
1000.0 |
|
| 4.2 (Material : Insulation) |
100.0 |
|
| 4.2 (Material : Messenger Conductor) |
100.0 |
|
| 6.4 (Construction : Conductor) |
250.0 |
|
| 7.1 (Construction Insulation) |
100.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
250.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
1000.0 |
|
| 12 (Identification) |
100.0 |
|
| 15 (Discrete Tests) |
12500.0 |
|
| 10.1 (Type tests (Complete Cable)) |
20000.0 |
|
| 10.2 (Acceptance tests (Complete Cable)) |
16000.0 |
|
| 10.1 C VI (1) (Carbon Black Content) |
1000.0 |
|
| 10.1 C VI (2) (Physical tests for XLPE insulation - Carbon Black Dispersion) |
1500.0 |
|
|
| 3170 |
National Test House (ER), Kolkata
| BS 476 part 7 (1997) - Classification of Surface spread of flame of products |
Classification of Surface spread of flame of products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Surface Spread of flame test
( BS 476 Part 7)) |
8000.0 |
|
|
| 3171 |
National Test House (ER), Kolkata
| Chemical Paint Lab NTH ER Custom Specification (2022) - Chemical Paint Lab NTH ER Custom Specification |
Chemical Paint Lab NTH ER Custom Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Description) |
100.0 |
|
| 2 (Adhesion by tape test (Cross Hatch)
ASTM D-3359) |
1500.0 |
|
| 3 (Adhesion Pull off strength
ASTM D 4541) |
5000.0 |
|
| 1 (Dry Film Thickness (as per ASTM D -7091)
Non destructive Measurements) |
1000.0 |
|
| 4 (MEK rub test
(ASTM D 4752)) |
500.0 |
|
|
| 3172 |
National Test House (NR), Ghaziabad
| NS/NR/RPPT (2022) - Test for Writing/Notice/Display Boards, Low Dust Chalk, Duster and Acrylic Desk etc |
Test for Writing/Notice/Display Boards, Low Dust Chalk, Duster and Acrylic Desk etc |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| NA (Galvanized Steel Sheet Thickness) |
1000.0 |
|
| NA (Zinc Coating (in micron)) |
2000.0 |
|
| NA (Length) |
500.0 |
|
| NA (Dimension) |
100.0 |
|
| NA (Colour) |
1000.0 |
|
| NA (Purpose (Laminated Sheet Green)) |
1000.0 |
|
| NA (Purpose of Chalk for Writing) |
1000.0 |
|
| NA (Application /Usage) |
1000.0 |
|
| NA (Purpose (Laminated Sheet White)) |
1000.0 |
|
| NA (Coating Thickness Top Side (mm)) |
1000.0 |
|
| NA (Coating Thickness Bottom Side (mm)) |
1000.0 |
|
| NA (Type of Duster (Magnetic or Non-magnetic)) |
1000.0 |
|
| NA (Zinc Coating as per IS 277(g/sq.meter)) |
2000.0 |
|
| NA (Bulk Density) |
1000.0 |
|
| NA (Density) |
1000.0 |
|
| NA (Gloss of Sheet Top Side @ 60deg) |
1000.0 |
|
|
| 3173 |
National Test House (ER), Kolkata
| NCD 1427 Issue 1 - Specification for mineral wool marine board for thermal & acoustic insulation |
Specification for mineral wool marine board for thermal & acoustic insulation |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Appendix A , Clause No 2.1 (Weight of Glass Cloth Facing) |
1000.0 |
|
| Appendix A , Clause No 2.2 (Thickness of Glass Cloth Facing) |
1000.0 |
|
| Appendix A , Clause No 2.3.1 (Warp ends/10cm) |
1000.0 |
|
| Appendix A , Clause No 2.3.2 (Weft ends/10cm) |
1000.0 |
|
| Appendix A , Clause 2.5.1 (Breaking Strength (Warp)) |
2000.0 |
|
| Appendix A, Clause- 2.5.2 (Breaking Strength (Weft)) |
2000.0 |
|
| Appendix A, Clause-3 (Ability to Bend) |
1000.0 |
|
| Appendix B, Table -B1(a) (Percent Alkalinity (As Na2O)) |
1000.0 |
|
| Appendix B, Table -B1(b)(i) (Compression) |
2000.0 |
|
| Appendix B,Table (b) (ii) (Recovery) |
1000.0 |
|
| Appendix B ,Table-B1(C) (Puncture Resistance) |
2000.0 |
|
| Appendix B ,Table-B1(d) (Inter laminar Adhesion) |
2000.0 |
|
| Appendix B ,Table-B1(e) (Water Absorption) |
2000.0 |
|
| Appendix B ,Table-B1(f) (Shot Content) |
2000.0 |
|
| Appendix B ,Table-B1(l) (Surface Spread of Flame) |
8000.0 |
|
| Appendix C, 3(g) (Initial Tack Test) |
2000.0 |
|
| Appendix C, 3(h) (Bond Strength) |
2000.0 |
|
| 7.0 (Thickness of Finished Boards) |
1000.0 |
|
| 7.0 (Length of finished Boards) |
500.0 |
|
| 7.0 (Width of Finished Boards) |
500.0 |
|
| 8.0 (Weight of Finished Boards) |
1000.0 |
|
| 9.0 (Freedom from Defects) |
500.0 |
|
|
| 3174 |
National Test House (NER), Guwahati
| IS 6745 (1972) - Mass of Zinc Coating (IS 6745) |
Mass of Zinc Coating (IS 6745) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Mass of Zinc Coating,(IS 6745:1972)) |
2000.0 |
|
|
| 3175 |
National Test House (NR), Ghaziabad
| AASHTO T 166 (for BC & DBM cores) - AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens |
AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test for bulk specific gravity (Gmb) of DBM (on the lines of AASHTO T 166)) |
2500.0 |
|
| 2 (Test for bulk specific gravity (Gmb) of BC (on the lines of AASHTO T 166)) |
2500.0 |
|
|
| 3176 |
National Test House (SR), Chennai
| GOST 2850-80 (80) - Millboard |
Millboard |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Density , Grade : KAOH-1& KAOH-2) |
1000.0 |
|
| 2 (Ultimate Tensile Strength (Longitudinal Direction) , Grade KAOH-1) |
1500.0 |
|
| 2 (Ultimate Tensile Strength (Transverse Direction) , Grade KAOH-1) |
1500.0 |
|
| 2 (Ultimate Tensile Strength (Transverse Direction) , Grade KAOH-2) |
1500.0 |
|
| 2 (Ultimate Tensile Strength (Longitudinal Direction) , Grade KAOH-2) |
1500.0 |
|
| 3 (Moisture Content, Grade: KAOH-1) |
1000.0 |
|
| 3 (Moisture Content, Grade: KAOH-2) |
1000.0 |
|
| 4 (Loss of Weight by Calculation, Grade : KAOH-1 & KAOH-2) |
2000.0 |
|
|
| 3177 |
National Test House (WR), Mumbai
| IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification |
High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.3 (Mass per meter run.) |
1000.0 |
|
| 8.6 (Impact Energy) |
3000.0 |
|
| 8.7 (Resistance to Intergranular corrosion) |
10000.0 |
|
| 9.2 (Tensile Strength (Dia of the bar 0-12 mm)) |
500.0 |
|
| 9.2 (0.2 percent proof stress) |
500.0 |
|
| 9.2 (Percentage Elongation after Fracture.) |
500.0 |
|
| 9.2 (Percentage total elongation at maximum force) |
500.0 |
|
| 9.3 (Bend Test) |
1000.0 |
|
| 9.4 (Re Bend Test) |
1000.0 |
|
| 9.2 (Tensile Strength (dia of the bar 12-28 mm)) |
1500.0 |
|
| 9.2 (Tensile Strength (dia of the bar 28-32 mm)) |
2000.0 |
|
| 4.3.1 (4) (Carbon (as C)) |
500.0 |
|
| 4.3.1 (5) (Silicon (as Si)) |
500.0 |
|
| 4.3.1 (6) (Manganese (as Mn)) |
500.0 |
|
| 4.3.1 (7) (Sulphur (as S)) |
500.0 |
|
| 4.3.1 (8) (Chromium (as Cr)) |
500.0 |
|
| 4.3.1 (9) (Nickel (as Ni)) |
500.0 |
|
| 4.3.1 (10) (Molybdenum (Mo)) |
500.0 |
|
| 4.3.1 (11) (Phosphorus (as P)) |
500.0 |
|
| 4.3.1 (12) (Copper (as Cu)) |
500.0 |
|
| 4.3.1 (13) (Nitrogen (as N)) |
500.0 |
|
|
| 3178 |
National Test House (ER), Kolkata
| Custom-35-ER - False Ceiling and Accessories |
False Ceiling and Accessories |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Dimension (Thickness)) |
1000.0 |
|
| 2 (Dimension (Diameter)) |
1000.0 |
|
| 3 (Dimension (length)) |
1000.0 |
|
| 4 (Mass of Zinc Coating) |
2000.0 |
|
| 6 (Dimension (Size)) |
1000.0 |
|
| 7 (Dimension (Perforation Dia)) |
1000.0 |
|
| 8 (Dimension(Height of Tiles)) |
1000.0 |
|
| 13.2 First Characteristic Numeral 2 (Protection against solid foreign objects of 12.5 mm dia and greater,First Characteristic Numeral 2) |
7500.0 |
|
| 14.2.3 second characteristic numeral 3 (14.2.3 second characteristic numeral 3:Protected against spraying water) |
7500.0 |
|
| 14.2.4 Second characteristic numeral 4 (14.2.4 Second characteristic numeral 4 :Protected against splashing water) |
7500.0 |
|
| 4.2 (Material : Messenger Conductor) |
100.0 |
|
| 27358 (Material : Insulation) |
100.0 |
|
| 6.3 (Weight of Phosphate Coating) |
2000.0 |
|
| 6.11(ix) (Accelerated storage stability) |
100.0 |
|
| 9 (Carbon) |
500.0 |
|
| 9 (Sulphur) |
500.0 |
|
| 9 (Phosphorus) |
500.0 |
|
| 9 (Manganese) |
1000.0 |
|
| 9 (Nickel) |
1000.0 |
|
| 9 (Silicon) |
1000.0 |
|
| 13 (Perforation Dia of Tiles) |
1000.0 |
|
| 12 (Powder Coating Thickness of Tiles) |
2000.0 |
|
| 11 (Size of Tiles) |
1000.0 |
|
| 10 (Thickness of Tiles) |
500.0 |
|
|
| 3179 |
National Test House (ER), Kolkata
| RDSO/2013/CG-01 (2023) - Non-Asbestos Based Organic Brake Pads for LHB Type Coaches Equipped with Disc Brake System on Indian Railways |
Non-Asbestos Based Organic Brake Pads for LHB Type Coaches Equipped with Disc Brake System on Indian Railways |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.0 (Bending Strength) |
3000.0 |
|
| 9.0 (Density) |
1000.0 |
|
| 9.0 (Ash Content) |
1000.0 |
|
| 9.0 (Acetone extract) |
2000.0 |
|
| 9.0 (Cross braking strength) |
2000.0 |
|
|
| 3180 |
National Test House (NR), Ghaziabad
| IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification |
Coarse and fine aggregate for Concrete for concrete-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method) |
3000.0 |
|
| 5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O) |
1000.0 |
|
| 5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3) |
1000.0 |
|
| 5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT) |
1000.0 |
|
| 12 (Test for Deleterious Materials(IS 2386(Part 2):1963)) |
2000.0 |
|
|
