NTH - Management Information System

Search by Standard No.

Reset

3865 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3061

National Test House (SR), Chennai

IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Acceptance Tests (Conductor resistance test,Test for thickness of insulation,Tensile strength and elongation at break of insulation,Insulation resistance test,High voltage test ,Flammability test ,Oxygen index test ,Test for temperature index , Test for halogen acid gas evaluation and Test for smoke density rating ))	30000.0
5 (The insulation shall be of polyvinyl chloride compound of a) Type A — Cables for fixed installation b) Type C — Heat-resistant cables (HR) c) Type D — Flexible cables and cords The insulation shall be so applied that it fits closely on the conductor. It shall be possible to remove it without damage to the insulation itself, to the conductor)	-
6 (Filler: Material & Application The fillers shall be composed of one of the following or of any combination of the following: a) A compound based on unvulcanized rubber or plastics; or b) Natural or synthetic textiles; or c) Paper; or d) PVC)	-
7 (Binder tape (Binder tape shall consist of plastic or proof textile material.))	-
8 (Sheath: Material, Colour & application of sheath The sheath shall be polyvinyl chloride compound of the type specified for each type of cable as given below: a) Type ST1 — cables for fixed installations b) Type ST2 — cables sheathed with 85°C HRPVC compound c) Type ST3 — flexible cables)	-
9 (Ovality)	-
12 (Core identification)	-
13 (Cable code)	-
15 (Packing and Marking)	-
Table 1. iii. a. 1 (Annealing test for copper (core 1))	500.0
Table 1. iii. a. 2 (Tensile test for Aluminium(core 1))	500.0
Table 1. iii. a. 3 (Wrapping test for Aluminium)	500.0
Table 1. iii. a. 4 (Conductor resistance test (core 1))	1500.0
Table 1. iii. a. 5 (Persulphate test (for tinned copper conductor only))	1000.0
Table 1. iii. b (Test for overall dimension and thickness of insulation/sheath)	1000.0
Table 1. iii. b(2) (Minimum thickness of insulation (Core 1))	500.0
Table 1. iii. b(3) (Average thickness of sheath)	-
Table 1. iii. b(4) (Minimum thickness of sheath)	-
Table 1. iii. b(5) (Overall dimension)	500.0
Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1))	1000.0
Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1))	1000.0
Table 1. iii. c.2 (Loss of mass test for insulation (Core 1))	500.0
Table 1. iii. c.3(1) (Tensile strength test after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1))	-
Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1))	-
Table 1. iii. c.4 (Shrinkage test for insulation(Core 1))	500.0
Table 1. iii. c.5 (Heat shock test for insulation(Core 1))	250.0
Table 1. iii. c.6 (Hot deformation test for insulation(Core 1))	250.0
Table 1. iii. c.7 (Thermal stability test for insulation(Core 1))	500.0
Table 1. iii. c.8 (Cold bend test for insulation(Core 1))	1000.0
Table 1. iii. c.9 (Cold impact test for insulation(Core 1))	1000.0
Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1))	750.0
Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1))	500.0
Table 1. iii. c.11 (The Oxygen index for insulation(Core 1))	5000.0
Table 1. iii. c.12 (Test temperature index for insulation(Core 1))	5000.0
Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1))	5000.0
Table 1. iii. c.14 (Smoke density test for insulation (Core 1))	5000.0
Table 1. iii. d.1(1) (Tensile strength for sheath)	-
Table 1. iii. d.1(2) (Elongation test for sheath)	-
Table 1. iii. d.2 (Loss of mass test for sheath)	-
Table 1. iii. d.3(1) (Tensile strength after ageing for sheath)	-
Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath)	-
Table 1. iii. d.3(3) (Variation in tensile strength after ageing for sheath)	-
Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath)	-
Table 1. iii. d.4 (Shrinkage test for sheath)	-
Table 1. iii. d.5 (Heat shock test for sheath)	-
Table 1. iii. d.6 (Hot deformation test for sheath)	-
Table 1. iii. d.7 (Thermal stability for sheath)	-
Table 1. iii. d.8 (Oxygen index for sheath)	5000.0
Table 1. iii. d.9 (Test for temperature index for sheath)	5000.0
Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath)	5000.0
Table 1. iii. d.11 (Smoke density rating for sheath)	5000.0
Table 1. iii. d.12 (Cold bend test for sheath)	-
Table 1. iii. d.13 (Cold impact test(for sheath))	-
Table 1. iii. e.1(1) (High voltage test (water immersion test))	3000.0
Table 1. iii. e.1(2) (High voltage test DC (Core 1))	1000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature))	1500.0
Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning)	500.0
Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion)	750.0
Table 1. iii. e.5 (Additional Ageing Test (for Cables for Outdoor Use))	3000.0
Table 1. iii. e.5(1) (High Voltage Test after additional ageing)	-
Table 1. iii. e.5(2) (Cold bend or cold impact test after additional ageing)	-
Table 1. iii. (Type tests)	40000.0
Table 1 (Test on two core cable/single core sheathed cable)	2000.0
Table 1 (Test on three core cable)	4000.0
Table 1 (Test on four core cable)	6000.0
Table 1 (Test on five core cable)	8000.0
Table 1 (Test on six core cable)	10000.0
table 1 (Test on seven core cable)	12000.0
Table 4 of IS 191 (Purity test (for Cu))	3500.0

3062

National Test House (SR), Chennai

Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060

Method of Test for Paper on the lines of IS 1060

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Substances)	1000.0

3063

National Test House (SR), Chennai

IS 3087 (2005) - Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.5 & 11.7Table 1, Sl No.(v) , (Swelling due to surface absorption-IS 2380 (Part 17):1977)	2000.0
9.4 & 11.6, Table 1, Sl No.(iii) & (iv) (Swelling in water-IS 2380 (Part 17):1977)	1500.0
9.3 & 11.5, Table 1, Sl No.(ii) (Water Absorption-IS 2380 (Part 16):1977)	1000.0
9.2 & 11.4 (Moisture content-IS 2380 (Part 3):1977)	1000.0
9.1 & 11.3, Table 1, Sl No.(i) (Density-IS 2380 (Part 3):1977)	500.0
8 and 11.2 (Dimensions and Tolerances-IS 2380 (Part 2):1977)	500.0
custom (Compression strength)	1500.0
custom (Compression strength)	1500.0
custom (Lead content)	1200.0
custom (Shore D)	1000.0
11.9.1, Table 1, Sl No.(ix), a & b (Tensile strength perpendicular to surface after cyclic/accelerated water resistance test-IS 2380 (Part 5):1977)	2000.0
11.10, Table 1, Sl No.(x) (Screw Withdrawal Strength-IS 2380 (Part 14):1977)	1500.0
11.9, Table 1, Sl No.(viii) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
11.8, Table 1, Sl No.(vi) & (vii) (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
9.6 (Workability-IS 3087:2005)	2000.0

3064

National Test House (NWR), Jaipur

IEC 62271-102:2018 (2018) - High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.106 (Mechanical Endurance Test M0 Class on DBCR Isolator (1000 Operation))	20000.0
7.5 (Temperature Rise Test as per IEC62271-102:2018)	20000.0

3065

National Test House (ER), Kolkata

IS 9537 : Part 1 (1980) - Specification for conduits for electrical installations: Part 1 general requirements

Specification for conduits for electrical installations: Part 1 general requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Compression Test (Compression Force: 1250 N))	3000.0
9 (Compression Test (Compression Force: 4000 N))	3000.0
9 (Compression Test (Compression Force: 750 N))	3000.0
7 (Outside Diameter (Cl 7.1 of IS 9537 (Part-II): 1981)	500.0
7 (Wall Thickness (Cl. 7.1 of IS 9537(Part II):1981)	500.0
7 (Checking the Minimum Outside diameter (Cl 7.2.1 of IS 9537(Part II): 1981)	250.0
7 (Checking the Maximum Outside diameter (Cl 7.2.2 of IS 9537(Part II): 1981)	250.0

3066

National Test House (ER), Kolkata

NTH ER Customer specification 2 -High Polymer - High Pressure Decorative Laminated sheet IS 2046:1995 RA 2020

High Pressure Decorative Laminated sheet IS 2046:1995 RA 2020

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.0 (Resistance to colour change in Xenon arc light (Blue wool Std No 8))	8000.0
7.1 (Resistance to colour change in Xenon arc light)	5000.0

3067

National Test House (ER), Kolkata

IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification

Coarse and fine aggregate for Concrete for concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0

3068

National Test House (ER), Kolkata

PGCIL SFQP No.: Doc No. C/FQA/SFQP/SCW REV.06 dated:03.08.2020 (2020) - Specification ( Test on Stone Gravel) Power Grid Corporation of India Ltd.

Specification ( Test on Stone Gravel) Power Grid Corporation of India Ltd.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.6 (Measurement of Resistivity of Gravel)	20000.0

3069

National Test House (ER), Kolkata

IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete

Coarse and fine aggregate for Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963)	2000.0
2 (Test for Specific Gravity (IS:2386(part -III)1963))	500.0
3 (Test for Water absorption (IS:2386(part -III)1963))	1000.0
4 (Test for Bulk Density-Loose condition ( IS:2386(part -III)1963))	500.0
5 (Test for Bulk Density-Compacted condition ( IS:2386(part -III)1963))	500.0
6 (Test for Silt content- (CPWD Specification))	1000.0
7 (Deleterious Materials)	2000.0
8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963))	2000.0
9 (Test for Alkali aggregate reaction- Chemical method (IS 2386(Part 7):1963))	3000.0
10 (Test for bulking of sand)	1000.0

3070

National Test House (SR), Chennai

School Bag-CUST-TNTB&ESC (2021) - TS for School Bag

TS for School Bag

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part1 1.1 (Colour of the Bag)	85.0
Part1 1.2 (Colour of the Front Pocket)	85.0
Part1 1.3 (Colour of Shoulder Strip)	85.0
Part1 1.4 (Colour of Adjustable Belt)	85.0
Part1 1.5 (Colour of Beeding)	85.0
Part1 1.6 (colour of shoulder adjustable buckle)	85.0
Part1 1.7 (Colour of Water bottle pocket)	85.0
Part1 1.8 (Colour of Zip & Runner)	85.0
Part1 1.9 (Colour of ID Card pocket)	80.0
Part1 1.10 (Colour of Top handle)	80.0
Part1 1.11 (Colour of Belt Buckle)	80.0
Part1 1.12 (Colour of Inner Compartment)	80.0
Part2 2.1.1 (School Bag Length)	70.0
Part2 2.1.2 (School Bag Breadth)	35.0
Part2 2.1.3 (School Bag Total Depth, Border side)	35.0
Part2 2.1.4 (School Bag First Compartment Depth)	35.0
Part2 2.1.5 (School Bag Second Compartment Depth)	35.0
Part2 2.1.6 (Thickness of School bag material)	35.0
Part2 2.1.7 (Thickness of School bag Compartment Material)	35.0
Part2 2.1.8 (Weight of School bag)	35.0
Part2 2.2.1 (Front pocket Length Top-to-Bottom)	35.0
Part2 2.2.2 (Front pocket Breadth Right-to-Left)	35.0
Part2 2.2.3 (Front pocket Depth)	70.0
Part2 2.3 (SHOULDER STRIP-Edges stitched lengthwise along with foam)	35.0
Part2 2.3.1 (Shoulder Strip Length)	35.0
Part2 2.3.2 (Shoulder Strip Breadth)	35.0
Part2 2.3.3 (Shoulder Strip Thickness including foam)	35.0
Part2 2.3.4 (Shoulder Strip Hooke, free Length)	35.0
Part2 2.4.1 (Water Bottle Pocket Length)	70.0
Part2 2.4.2 (Water Bottle Pocket Depth at bottom)	35.0
Part2 2.4.3 (Water Bottle Pocket Diameter of Elastic on Stretching)	70.0
Part2 2.5.1.1 (First Compartment Zip Length)	30.0
Part2 2.5.1.2 (Zip Size of First Compartment)	30.0
Part2 2.5.1.3 (Second Compartment Zip Length)	30.0
Part2 2.5.1.4 (Zip Size of Second Compartment)	30.0
Part2 2.5.2.1 (Front Pocket Zip Length)	30.0
Part2 2.5.2.2 (Front Pocket Zip size)	30.0
Part2 2.5.3.1 (Runner Handle Length)	30.0
Part2 2.5.3.2 (Runner Handle Width)	30.0
Part2 2.5.3.3 (Runner Handle Thickness)	30.0
Part2 2.5.3.4 (Weight of runner handle with head)	30.0
Part2 2.6.1 (ID card Pocket Length)	30.0
Part2 2.6.2 (ID card Pocket Width)	30.0
Part2 2.7.1 (Stitched Edges Pipe Beeding Diameter)	30.0
Part2 2.8.1 (Top Handle Length)	30.0
Part2 2.8.2 (Top Handle Breadth/Diameter)	30.0
Part2 2.9 (Adjustable Belt free ends)	30.0
Part2 2.9.1 (Adjustable Belt Length)	23.0
Part2 2.9.2 (Adjustable Belt Breadth)	23.0
Part2 2.9.3 (Adjustable Belt Thickness)	23.0
Part2 2.9.4 (Adjustable Belt Weight per meter)	23.0
Part2 2.10 (Shoulder Adjustable Belt Buckle)	23.0
Part3 3.1.1 (Bag Outer Layer material)	210.0
Part3 3.1.2 (Bag Inner Layer material)	210.0
Part3 3.2.1 (Compartment Outer Layer material)	210.0
Part3 3.2.2 (Compartment Inner Layer material)	210.0
Part3 3.3.1 (Front Pocket Outer Layer material)	210.0
Part3 3.3.2 (Front Pocket Inner Layer material)	210.0
Part3 3.4.1 (Shoulder Strip Outer Layer material)	210.0
Part3 3.4.2 (Shoulder Strip Inner Layer material)	210.0
Part3 3.4.3 (Shoulder Strip Cushion Foam material)	210.0
Part3 3.5.1 (Water Bottle Pocket Outer Layer)	210.0
Part3 3.5.2 (Water Bottle Pocket Inner Layer material)	210.0
Part3 3.5.3 (Water Bottle Pocket Net material)	210.0
Part3 3.6 (Zip material material)	210.0
Part3 3.7 (Runner material material)	210.0
Part3 3.8 (ID Card material material)	210.0
Part3 3.9 (Stitched Edges Pipe Beeding material material)	210.0
Part3 3.10 (Top handle material)	210.0
Part3 3.11 (Adjustable Belt material)	215.0
Part3 3.12 (Shoulder adjustable belt buckle material)	215.0
Part4 4.1.1 (Bag Outer Material Breaking Strength Warp)	425.0
Part4 4.1.1.1 (Bag Outer Material Breaking Strength Weft)	425.0
Part4 4.1.2 (Bag Outer Material Tearing Strength Warp)	425.0
Part4 4.1.2.1 (Bag Outer Material Tearing Strength Weft)	425.0
Part4 4.1.3 (Bag Outer Material GSM)	425.0
Part4 4.1.4 (Bag Outer Material Colour Fastness to Water)	425.0
Part4 4.2.1 (Bag Inner Material Breaking Strength Warp)	425.0
Part4 4.2.1.1 (Bag Inner Material Breaking Strength Weft)	425.0
Part4 4.2.2 (Bag Inner Material Tearing Strength Warp)	425.0
Part4 4.2.2.1 (Bag Inner Material Tearing Strength Weft)	425.0
Part4 4.2.3 (Bag Inner Material GSM)	425.0
Part4 4.2.4 (Bag Inner Material Colour Fastness to Water)	425.0
Part4 4.3.1 (Lateral Strength of Slide Fastener(Zip))	500.0
Part4 4.3.2 (Resistance of Slide Fastener To Repeated Opening and Closing(Zip))	1000.0
Part4 4.3.3 (Strength of Slide Fastener Puller(Zip))	500.0
Part4 4.4.1 (Minimum Static Load Bearing Capacity for 1 hour 10kg or15kg or 20kg)	270.0
Part4 4.4.2 (Shoulder Strap Joint pulling Strength(Top back Strap))	270.0
Part4 4.4.3 (Attachment Strength of Adjustable Belt and Buckle)	270.0
Part4 4.4.4 (Top Handle Attachment Strength)	270.0
Part4 4.4.5.1 (Right side Seam Strength)	270.0
Part4 4.4.5.2 (Left side Seam Strength)	270.0
Part4 4.4.5.3 (Bottom side Seam Strength)	270.0
Part4 4.4.5.4 (Pocket Seam Strength)	270.0
Part4 Note1 (Stitch Length)	270.0
Part4 Note2 (Top handle Joint Stitch)	270.0
Part4 Note3 (Shoulder Strip Joint Stitch)	260.0
Part4 Note4 (Provision of second compartment)	260.0
Part4 Note5 (Adjustable strip bottom stitch)	260.0
Part4 Note6 (Number of runners on each compartment)	260.0
Part4 Note7 (Shoulder Strap Attachment)	260.0
Part4 4.1.5 (Bag Outer Material Colour Fastness to minimum Dry 10 rubbings)	425.0
Part4 4.1.5.1 (Bag Outer Material Colour Fastness to minimum Wet 10 rubbings)	425.0
Part4 4.2.5 (Bag Inner Material Colour Fastness to minimum Dry 10 rubbings)	425.0
Part4 4.2.6 (Bag Inner Material Colour Fastness to minimum Wet 10 rubbings)	425.0
1 to 4, Note (Test Results)	19200.0

3071

National Test House (SR), Chennai

IS 12776 (2002) - Galvanized strand for earthing - Specification (First Revision)

Galvanized strand for earthing - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Construction)	-
6 (Diameter of the strand)	1000.0
8.1 (Breaking load of the wire)	1500.0
8.2 (Elongation of steel wire)	1500.0
8.3 (Resistance of the Earth Strand)	2000.0
8.4 (Wrapping test)	2000.0
8.5(1) (Galvanizing Test-Mass of Zinc coating)	2000.0
8.5(2) (Galvanizing test-Uniformity of Zinc Coating)	1000.0
8.6 (Torsion test)	2000.0
Annex A (8) (Lay ratio)	1000.0
Annex A(9) (Minimum breaking force of galvanized earth strand)	5000.0
Annex A(11) (Equivalent modulus of elasticity)	2000.0
4 (Material (Chemical Composition))	2500.0

3072

National Test House (ER), Kolkata

IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision )

Concrete Mix Proportioning — Guidelines ( Second Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Concrete Mix Design (IS 10262:2019))	35000.0

3073

National Test House (SR), Chennai

IS 15652 (2006) - Insulating mats for electrical purposes - Specification

Insulating mats for electrical purposes - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.6 (Visual)	2500.0
6.3 (Physcical)	6000.0
8.3 (Tensile Strength)	500.0
8.5 (Tensile Strength)	4000.0
8.1 (Tensile Strength)	4500.0
8.4.2 (Fuctional)	1500.0
8.2.2 (Current)	4000.0
8.2.1 (Resistance)	2500.0
8.4.1 (Time)	4000.0
6.2 (Width)	2000.0
8.2.4 (Voltage)	1000.0
8.2.3 (Voltage)	3000.0
8.2.3 (AC Dielectric Strength)	7000.0
8.2.4 (AC Proof Voltage)	3000.0
6.2 (Dimensions)	1000.0
8.4.1 (Flame Retardance)	2000.0
8.2.1 (Insulation Resistance with Water)	4000.0
8.2.2 (Leakage Current Test)	2500.0
8.4.2 (Low Temperature Resistance & High Voltage test)	4000.0
8.1 (Tensile Strength and Elongation at Break)	1500.0
8.5 (After Acid/Alkalis and Oil Resistance)	4500.0
8.3 (Tensile Strength and Elongation at break After Ageing)	4000.0
6.3 (Thickness)	500.0
8.6 (Extreme low temperature test)	6000.0

3074

National Test House (ER), Kolkata

IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386]

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (IS:2386(Pt.-1)_Size and Grading of Aggregates-Sieve Analysis)	2000.0
5.6 (Alkali aggregate reactivity, m.mol/lit.)	3000.0
5.5 (IS:2386(Pt.-5)_Soundness)	2000.0
5.2 (Deleterious materials)	2000.0
5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %)	1500.0
5.4.2 (IS:2386(Pt.-4)_Impact Value, %)	1500.0
5.4.1 (IS:2386(Pt.-4)Crushing Value)	1500.0
5.3 (Combined Elongation Index and Flakiness Index)	3000.0
5.7 (Specific gravity)	500.0
5.7 (Water absorption)	1000.0
5.5 (IS:2386(Pt.-5)_Soundness)	2000.0
5.5 (IS:2386(Pt.-5)_Soundness)	2000.0

3075

National Test House (ER), Kolkata

IS 25 (1979 RA 2021) - SPECIFICATION FOR ANTI FRICTION BEARING ALLOYS

SPECIFICATION FOR ANTI FRICTION BEARING ALLOYS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.1 (Tin % by mass)	1000.0
3.1.2 (Antimony % by mass)	1000.0
3.1.3 (Lead % by mass)	1000.0
3.1.4 (Copper % by mass)	1000.0
3.1.5 (Iron % by mass)	1000.0
3.1.6 (Arsenic % by mass)	1000.0
3.1.7 (Aluminium % by mass)	1000.0
3.1.8 (Bismuth % by mass)	1000.0
3.1.9 (Zinc % by mass)	1000.0
3.1.10 (Cadmium % by mass)	1000.0

3076

National Test House (ER), Kolkata

Counter Meter with Metal Wheel - Calibration of Counter Meter with Metal Wheel

Calibration of Counter Meter with Metal Wheel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension)	7000.0

3077

National Test House (ER), Kolkata

Elect-Safety on footwear IS 15298 Part 2 : 2011 (2011) - Personnel Protective Equipment . Part 2, Safety Footwear

Personnel Protective Equipment . Part 2, Safety Footwear

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3.3 of EN 50321-1999 read with IS 15298 Part 2 (Proof Voltage Test [5 kV (rms) applied for 3 minutes] as per EN 50321-1999)	10000.0
6.3.4 as per EN 50321-1999 read with IS -15298-2 (Withstand Voltage Test, 10 kV (rms) clause 6.3.4 as per EN 50321-1999 read with IS -15298-2)	10000.0

3078

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 5 - Calibration of Hydraulic jack.

Calibration of Hydraulic jack.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of the hydraulic jack (20T))	12000.0

3079

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 4 - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 1000 kN to 2000 kN).

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 1000 kN to 2000 kN).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of Force proving instruments (above 1000 kN to 2000 kN))	20000.0

3080

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 3 - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 500 kN to 1000 kN).

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 500 kN to 1000 kN).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of Force proving instruments (above 500 kN to 1000 kN))	15000.0

3081

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 2 - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 100 kN to 500 kN).

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 100 kN to 500 kN).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of Force proving instruments (above 100 kN to 500 kN).)	12000.0

3082

National Test House (NR), Ghaziabad

IS 428 (2013) - Washable distemper - Specification (Third Revision)

Washable distemper - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.7 i. (b) (Drying time b) Hard dry)	1500.0
6.7 ix (ix)Acc storage stability)	1500.0
6.7 viii (viii) Resistance to alkali)	1000.0
6.7 Vii (vii) Recoating properties)	1000.0
6.7 Vi (vi) Residue on sieve % by mass)	200.0
6.7 iii (iii)Finish)	500.0
6.7 ii (ii) Consistency)	1000.0
6.7 i. (a) (Drying time a) surface dry)	1500.0
6.7 iv (iv) Colour)	500.0
Clause 6.5 Table 1 (Please see Annexure)	10000.0

3083

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 1 - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 50 to 100 kN)

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 50 to 100 kN)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Force proving instruments (above 50 kN to 100 kN).)	10000.0

3084

National Test House (NR), Ghaziabad

BSA-Hastpustika (2022) - Hastpustika

Hastpustika

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
N/A (GSM of Inner Pages)	1000.0
N/A (GSM of Cover Page)	1000.0

3085

National Test House (SR), Chennai

IS 21 (1992) - Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Bend test)	1500.0
4.2 (Chemical composition, Aluminium)	350.0
4.2 (Chemical composition, Copper)	350.0
4.2 (Chemical composition, Magnesium)	350.0
4.2 (Chemical composition, Silicon)	350.0
4.2 (Chemical composition, Iron)	350.0
4.2 (Chemical composition, Manganese)	350.0
4.2 (Chemical composition, Zinc)	350.0
4.2 (Chemical composition, Titanium)	350.0
4.2 (Chemical composition, Chromium)	350.0
4.2 (Chemical composition, Lead)	350.0
4.2 (Chemical composition, Cu+Mg+Si+Fe+Mn+Zn for Designation 19000)	-
4.2 (Chemical composition, Cu+Si+Fe+Mn+Zn for Designation 19500)	-
4.2 (Chemical composition, Cu+Mg+Si+Fe+Mn+Zn for Designation 19600)	-
4.2 (Tensile test (Tensile strength))	1000.0
4.2 (Tensile test (0.2% Proof stress))	1000.0
4.2 (Tensile test (% Elongation at 50 mm gauge length))	1000.0

3086

National Test House (ER), Kolkata

ASTM 106 (2010) - Standard specification for Seamless Carbon Steel Pipe for high temperature service

Standard specification for Seamless Carbon Steel Pipe for high temperature service

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3087

National Test House (SR), Chennai

CUS/SR/NDT/01 (2022) - Metallography & NDT test

Metallography & NDT test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CUS/SR/NDT/01/A (Unit Weight)	1000.0
CUS/SR/NDT/01/B (Galvanized Coating Thickness)	2000.0
CUS/SR/NDT/01/C (Dimension)	1000.0
CLAUSE 3.0 (Micro Vicker Hardness by Microscope method)	3000.0
Clause 4.0 (Examination of Microstructure)	3000.0
CUS/SR/NDT/01/D (Powder Coating Thickness, micron)	1500.0

3088

National Test House (ER), Kolkata

NFC 33 020-1998 (1998) - Insulated cables & their accessories for power systems- Insulation piercing branch connectors for overhead distribution and services with bundle assembled cores, of rated voltage 0.6/1 kV

Insulated cables & their accessories for power systems- Insulation piercing branch connectors for overhead distribution and services with bundle assembled cores, of rated voltage 0.6/1 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.5 (Installation Test at low temperature)	11000.0
2.6 (Climatic ageing Test)	66000.0
- (Drawing Verification)	3000.0

3089

National Test House (SR), Chennai

IS 1608 : Part 1 (2018) - Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3090

National Test House (ER), Kolkata

IS 1110 (1990 RA 2019) - FERROSILICON - SPECIFICATION

FERROSILICON - SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2.1 (Silicon Content % by mass)	2000.0
7.2.2 (Carbon content % by mass)	2000.0
7.2.3 (Sulphur Content % by mass)	2000.0
7.2.4 (Phosphorous Content % by mass)	2000.0
7.2.5 (Aluminium Content % by mass)	2000.0
7.2.6 (Calcium content percent by mass)	2000.0