NTH - Management Information System

National Test House (NR), Ghaziabad

Kamla Nehru Nagar, Ghaziabad, Uttar Pradesh - 201002, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

7003775955 director-gzb[at]nth[dot]gov[dot]in

Scope List

Reset

591 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

211

IS 133 (2013) - ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.5.1 Table 1 (TEST RESULTS (Please see the Annexure) AS PER CUSTOMER REQUEST)	4000.0

212

NTH/NR/RPPT/PVC Coated Fabric (2024) - PVC Coated Fabric-Both Side Coated

PVC Coated Fabric-Both Side Coated

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7016 Part-I (Weight)	1000.0
IS 7016 Part-I (Thickness)	1000.0
IS 7016 Part-II (Breaking Strength, Warp)	1500.0
IS 7016 Part-II (Breaking Strength, Weft)	1500.0
IS 7016 Part-III (Tear Strength, Warp)	1500.0
IS 7016 Part-III (Tear Strength, Weft)	1500.0
IS 7016 Part-V (Adhesion)	2000.0
IS 7016 Part-VII (Water Proofness @220 PSI)	2000.0

213

CUSTOM SPEC-SILICA SAND - CUSTOM SPEC FOR SILICA SAND

CUSTOM SPEC FOR SILICA SAND

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Silicon Di Oxide % by mass)	2000.0
1 (IRON OXIDE ,% BY MASS)	2000.0
1 (ALUMINIUM DI OXIDE, % BY MASS)	2000.0
1 (TITANIUM DI OXIDE ,% BY MASS)	2000.0

214

NTH/NR/RPPT/2023/Sealant Component-B/01 (2023) - Sealant Component-B

Sealant Component-B

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 792 (Relative Density)	2000.0
ASTM D 2240 (Hardness, Shore D)	1000.0
ASTM D 1002 (Lap Shear Strength)	3000.0
ASTM D 695 (Compression Strength)	3000.0
ASTM D 638 (Tensile Strength)	3000.0
Firm's Requirement (Full Cure, Maximum)	1000.0
NCD 1410 (Critical Oxygen Index)	5000.0
NCD 1411 (Smoke Index)	10000.0
On the lines of BS 476 Part-7 (Fire Test)	8000.0

215

NTH/NR/RPPT/2023/Filler Component-A/01 (2023) - Filler Component-A

Filler Component-A

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 1084 (Viscosity of the Mixture)	2000.0
Firm's Requirement (Full Cure, Maximum)	1000.0
Firm's Requirement (Expansion, Minimum)	3000.0
Firm's Requirement (Critical Oxygen Index (After curing of the compound))	5000.0
Firm's Requirement (Smoke Index (After curing of the compound))	10000.0
On the lines of BS 476 Part-7 (Fire Test)	8000.0

216

IS 13757-1993 RA 2011 (1993 RA 2011) - Burnt Clay Fly Ash Building Bricks-specification

Burnt Clay Fly Ash Building Bricks-specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 Dimensions and Tolerances (Length, Width, Height mm)	1000.0
7.1 Compressive strength (Compressive strength)	2000.0
7.2 Water Absorption (Water absorption, %)	1000.0
7.3 Efflorescence (Efflorescence)	1000.0

217

ETI/OHE/50(6/97) re-designated to TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021) - Technical specification for Cadmium copper conductors for over head Electric Traction

Technical specification for Cadmium copper conductors for over head Electric Traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1 (Visual examination)	1000.0
8.2.2 (Chemical composition)	2000.0
8.2.3 (Measurement of diameter of individual wire and stranded conductor)	2000.0
8.2.4 (Measurement of weight of wire and conductor)	2000.0
8.2.5 (Measurement of lay length and lay ratio of each layer of stranded conductor)	5000.0
8.2.6 (Measurement of Electrical resistance of wire and stranded conductor)	15000.0
8.2.7 (Tensile test on wires)	32000.0
8.2.8 (Wrapping test on wires)	5000.0

218

ETI/OHE/76(6/97) - Technical specification for Hard Drawn Grooved Contact wire for Electric traction

Technical specification for Hard Drawn Grooved Contact wire for Electric traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Chemical Composition)	6000.0
8.5.1 (Visual Examination)	1000.0
8.5.2 (Measurement of Dimensions)	2000.0
8.5.3 (Compression Test)	3000.0
8.5.4 (Tensile Strength)	2000.0
8.5.4 (Elongation Test)	1000.0
8.5.6 (Micro-structure Examination)	3000.0
9.5.8 (Bending Test)	1000.0
9.5.6 (Brinell Hardness Test)	1.0
9.5.10 (Electrical Resistance Test)	2000.0
9.5.5 (Measurement of Weight)	1000.0

219

TI/SPC/OHE/CAT (Cu-Mg)/0150 (2016) - Hard drawn stranded Magnesium Copper Conductors

Hard drawn stranded Magnesium Copper Conductors

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Copper Content, % by Mass)	1000.0
5.1 (Magnesium Content, % by Mass)	1000.0
5.1 (Chemical composition, % by Mass)	5000.0
12.2 (Diameter, mm)	1000.0
Weight per Kilometre (Weight per Kilometre, kg)	1000.0
12.2 (Resistance per km at 20 deg. C)	2000.0
12.2 (Breaking load of individual wire)	19000.0
12.2 (Tensile strength of wire)	3000.0
0 (Lay length and Lay ratio)	1000.0
0 (Wrapping test)	1000.0

220

IS 13498- 2017 (2017) - BATHING BAR SPECIFICATION (for NR)

BATHING BAR SPECIFICATION (for NR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clauses 5.1, 7.3 and 8.1, Table 1 (Please see the annexure.)	10000.0

221

IS 7884 (2023) - Shampoo - Specification

Shampoo - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CL-3.4, Table 1 (Please see Annexure.)	8000.0

222

IS 13114 (1991) - forged brass gate, globe and check valves for water works purposes

forged brass gate, globe and check valves for water works purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Dimensions)	1000.0
9.2 (Materials)	2000.0
9.3 (Shell Test (Hydrostatic Test))	2500.0
9.3 (Seat & Backseat Test (Hydrostatic Test))	2500.0

223

IS 13095 (2020) - Butterfly Valves for General Purposes ( First Revision )

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Face to Face Dimensions)	1000.0
17.2 (Hydrostatic Test of Body)	2500.0
17.3 (Hydrostatic Test of Seat)	2500.0
15 (Materials)	2000.0
17.4 (Hydrostatic Test of Disc Strength)	2500.0
17.1 (Performance Test)	5000.0

224

IS 1065 : Part 1 (2019) - Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Available Chlorine)	2500.0

225

IS 13213 (2018) - Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible Tests))	60000.0
Cl 1 Table 1 (Please see Annexure Durability ( Outdoor exposure only) + Keeping properties)	30000.0

226

IS 14946 (2001) - Zinc ethyl silicate primer, two components - Specification

Zinc ethyl silicate primer, two components - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible tests))	90000.0
Cl 1 Table 1 (Please see Annexure for Salt spray & Protection against corrosion test)	70000.0

227

IS 13213 (2018) - Polyurethane Full Gloss Enamel (Two Pack) — Specification

Polyurethane Full Gloss Enamel (Two Pack) — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Polyurethane Full Gloss Enamel (Two Pack) — Specification (Please refer annexure for tests result)	46000.0

228

NTH/NR/RPPT/HDPE Membrane (2023) - HDPE Membrane for Waterproofing

HDPE Membrane for Waterproofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Puncture Resistance)	3000.0
Firm's Requirement (Tensile Strength)	1500.0
Firm's Requirement (Elongation)	1500.0
Firm's Requirement (Peel Adhesion to Concrete)	3000.0
Firm's Requirement (Thickness)	1000.0
Firm's Requirement (Lap Adhesion)	2000.0

229

IS 1776 (1989) - Folding box board, uncoated - Specification (First Revision)

Folding box board, uncoated - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Substance (Grammage))	1000.0
Table 1 (Burst Index)	2000.0
Table-1 (pH (both sides))	1000.0
Table-1 (Ash Content)	2000.0
Table-1 (One Minute Cobb Test (Front))	2000.0
Table-1 (One Minute Cobb Test (Back))	2000.0
Table-1 (Moisture Content (As received))	1000.0
Table-1 (Brightness of White Boards, Front Side only)	2000.0
Table-1 (Stiffness Factor)	1000.0
Table-1 (Wax Pick (Front))	2000.0
Table-1 (Wax Pick (Back))	2000.0
Table-1 (Smoothness)	2000.0

230

Custom/Civil/Misc/2023-24 - .

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Rebound Hammer per segment)	1500.0
3 (Scientists charge)	10000.0
1 (Hardness of Stone)	1000.0
2 (Dimensions of Sanitary Fittings)	2000.0
5 (Thickness of Board)	1000.0
6 (Thickness of Laminate of Board)	1000.0
7 (Thickness of Board with Laminate)	1000.0
- (Vetting of Specification-consultancy)	10000.0

231

IS 2508 (2016) - Low Density Polyethylene Films

Low Density Polyethylene Films

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Thickness)	4000.0

232

IS 516 : Part 5 : Sec 4 (2020) - Hardened Concrete Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test ( First Revision )

Hardened Concrete Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Rebound hammer test (field test))	15000.0
- - (Scientist charges (2 Scientists) for site testing / inspection)	10000.0
- (Rebound Hammer test)	3000.0

233

IS:309-2005 - COMPRESSED OXYGEN GAS — SPECIFICATION

COMPRESSED OXYGEN GAS — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CLAUSE-4,Table-1 (Purity of compressed oxygen gas)	3000.0
CLAUSE-4,Table-1 (DEW POINT)	2000.0
CLAUSE-4,Table-1 (Volume Fraction of Carbonmonoxide and Carbondioxide)	2000.0
CLAUSE-4,Table-1 (Volume Fraction of Hydrocarbons)	2000.0

234

IS 341 (2016) - Black japan, types a, b and c - Specification (Second Revision)

Black japan, types a, b and c - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
x) (Keeping properties)	5000.0
ix) (Flash point)	1200.0
viii) (Resistance to heat (for 2 h) (for Type C))	1200.0
vii) (Resistance to kerosene for Types B and C))	1500.0
vi) (Stripping test)	1200.0
b) (Scratch hardness (load 1 000g))	1500.0
a) (Bend test (with 6.25 mm dia mandrel and in type 1 apparatus))	1500.0
iv) (Ash content percent by mass)	1200.0
iii) (Volatile matter content, percent by mass, Max)	2000.0
ii) (Finish)	1200.0
5.6 Table i) b) (b) Hard dry)	1500.0
5.6 Table i) a) (a) surface dry)	1200.0
5.6 Table i) (Drying time)	1500.0
5.5 (Durability)	8000.0
5.4 (Lead Restriction)	2500.0
5.3 (Reaction with Varnish, Exterior)	1200.0
5.2 (Reaction with White Paint)	1000.0
5.1 (Composition)	2000.0

235

IS 5206 (1983) - Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Tensile Strength)	2000.0
9.2 (Elongation)	1000.0
9.2 (preparation of Butt Weld assembly)	4000.0
5.3 (Length of Electrodes)	500.0
6.1 (Bare Length-Contact End)	500.0
6.2 (Bare Length-Arc stricking end)	500.0
6.3 (Flux Covering)	500.0
9.1 (Copper)	500.0
9.1 (Molybdenum)	500.0
9.1 (Chromium)	500.0
9.1 (Nickel)	500.0
9.1 (Phosphorus)	500.0
9.1 (Sulphur)	500.0
9.1 (Manganese)	500.0
9.1 (Silicon)	500.0
9.1 (Carbon)	500.0
9.3 (preparation of Fillet weld assembly)	3000.0
1 (Macro examination)	1000.0
0 (Preparation of Weld piece)	3000.0

236

Custom/NDT/NR - -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

237

AWS specification - Specification for Fracture Test

Specification for Fracture Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Fracture Test)	9000.0

238

Fastener as per ISO/EN/BS EN - Mechanical properties of Fastener as per ISO 898 (Part- 1, 2), EN 14399 (P-3,5,9), ISO 10683

Mechanical properties of Fastener as per ISO 898 (Part- 1, 2), EN 14399 (P-3,5,9), ISO 10683

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Proof Load, kN)	3000.0
7.2 (Hardness)	2000.0
7.3 (Surface Integrity)	2000.0
7.4 (Depth of Decarburisation)	2000.0
7.5 (Coating Thickness, micron)	2000.0
7.6 (Adhesion test)	1000.0
6 (Chemical composition, % by mass)	2500.0
5.1 (Wedge Load Test)	3000.0
5.2 (Tensile test- TS, YS, %E and RoA)	4000.0
5.4 (Charpy Impact Test, At -20 deg C)	3000.0
5.5 (Compression load Test)	3000.0
5.5 (Dimensions, mm)	2000.0

239

IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Lead Restriction as metallic lead)	1500.0
4.3 table 1(i) (Drying time a) Hard dry)	1500.0
4.3 table 1(ii) (Consistency)	1000.0
4.3 table 1(iii) (Finish)	500.0
4.3 table 1(iv) (Wet opacity meter square per liter)	500.0
4.3 table 1(v) (Mass, kg/10 Litres,)	1000.0
4.3 table 1(vi) (Colour)	200.0
4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus))	1000.0
4.3 table 1(viii) (Stripping test ( By scratch hardness tester))	1000.0
4.3 table 1(ix) (Flash point deg.C)	1000.0
4.3 table 1(x) (Volatile matter content, percent by mass,)	1000.0
4.3 table 1(xi) (Resistance to humidity under conditions of condensation)	2000.0
4.3 table 1(xii) (Resistance to water)	1000.0
4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v))	1500.0
4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution))	1500.0
4.3 table 1(xv) (Resistance to chlorine (0.05 percent of chlorine (m/v).)	1000.0
4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,)	1500.0
4.3 table 1(xvii) (Keeping properties(12 Months))	5000.0

240

TI/SPC/OHE/CAT(Cd-Cu)/0971 - Technical specification for Cadmium Copper for Overhead Electrical Traction

Technical specification for Cadmium Copper for Overhead Electrical Traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Chemical composition, percent by mass)	5000.0
8.3.5 (Electrical Resistance)	5000.0
4.8 (Mass, kg/m)	1000.0
8.3.2 (Measurement of diameter, mm)	2000.0
8.3.4 (Lay length and Lay ratio, mm)	3000.0
8.3.6 (Tensile strength for individual 19 wires)	9500.0
8.3.7 (Wrapping test)	1000.0
9.1.1 (Visual examination)	1000.0
9.1.2 (Diameter of Stranded conductor)	1000.0