| 271 |
IS 374 (0) - Electric ceiling type fans and regulators |
Electric ceiling type fans and regulators |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Tests (Tests as per IS 374 and Annexure tests of the Customer.) |
16000.0 |
|
| Test-2 (Tests as per IS 374 and Annexure tests as specified by the customer) |
18000.0 |
|
| Tests (Tests) |
15000.0 |
|
| Test (Temperature Rise Test) |
2000.0 |
|
|
| 272 |
IS 2046 NR CIVIL (1995 Reaffirmed 2005) - Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets |
Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5 (Resistance to Surface Wear) |
5000.0 |
|
| 5.5 (Resistance to Crazing) |
1500.0 |
|
| 5.5 (Flexural Strength) |
4000.0 |
|
| 5.5 (Tensile Strength) |
4000.0 |
|
| 5.5 (Resistance to Steam) |
2000.0 |
|
| 5.5 (Resistance to Cigaretee Burns) |
2000.0 |
|
| 5.5 (Resistance to Staining) |
2000.0 |
|
| 5.5 (Resistance to Cracking) |
2000.0 |
|
| 5.5 & 5.3 (Dimensions-Length, Width, Thickness, Wraping (Flatness), Reverse Side Bonding) |
4000.0 |
|
| 5.5 (Resistance to Immersion in Boiling Water (Mass increase, Thickness increase, Appearance)) |
3500.0 |
|
| 5.5 (Resistance to dry heat at 180 degree centigrade) |
2000.0 |
|
| 5.4 (Surface Defects) |
1000.0 |
|
| 5.4.2 (Edge Defects) |
1000.0 |
|
| 5.4.3 (Broken Corners) |
1000.0 |
|
| 5.4.4 (Sanding Defects) |
1000.0 |
|
| 5.4.8 (Squareness) |
1000.0 |
|
| 5.5 (Dimensional Stability at Elevated Temperature (L, T)) |
1500.0 |
|
| 5.5 (Resistance to Scratch) |
2000.0 |
|
|
| 273 |
IS 15573 (2018) - Polyaluminium Chloride |
Polyaluminium Chloride |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Aluminium as Al2O3) |
1200.0 |
|
| 4.2 (Relative Basicity) |
1200.0 |
|
| 4.2 (Chloride as Cl) |
700.0 |
|
| 4.2 (Sulphate as SO4) |
700.0 |
|
| 4.2 (pH of 5 percent solution) |
1200.0 |
|
| 4.2 (Insoubles) |
1200.0 |
|
| 4.2 (Specific gravity at 25 deg C) |
500.0 |
|
| 4.2 (Dynamic viscosity at 20 deg C) |
500.0 |
|
| 4.2 (Mercury (as Hg,) |
700.0 |
|
| 4.2 (Arsenic (as As)) |
700.0 |
|
| 4.2 (Cadmium (as Cd)) |
500.0 |
|
| 4.2 (Lead (as Pb)) |
700.0 |
|
| 4.2 (Iron (as Fe)) |
500.0 |
|
| 4.2 (Manganese (as Mn)) |
500.0 |
|
| 4.2 (Chromium (as Cr)) |
500.0 |
|
| 4.2 (Selenium (as Se)) |
500.0 |
|
|
| 274 |
Custom NDT NR - - |
- |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| NA (Chemical Composition) |
3000.0 |
|
| NA (Tensile Strength) |
1000.0 |
|
| NA (Yield Strength) |
1000.0 |
|
| NA (% Elongation) |
1000.0 |
|
| NA (Hardness) |
2000.0 |
|
| NA (Bend Test) |
1000.0 |
|
| NA (Charpy Impact Test) |
3000.0 |
|
| NA (Dimension) |
1000.0 |
|
| NA (Microstructure Analysis) |
3000.0 |
|
| NA (Grain Size) |
3000.0 |
|
| NA (Inclusion Rating) |
3000.0 |
|
| NA (Depth of Decarburization) |
3000.0 |
|
| 0 (Magnetic Particle Inspection Test) |
2000.0 |
|
| 0 (Ultrasonic Test) |
4000.0 |
|
| 0 (Visual Inspection) |
1000.0 |
|
| 1 (Proof Load Test) |
3000.0 |
|
| 0 (Macro each Test) |
3000.0 |
|
|
| 275 |
IS 2547 : Part 1 (1976) - Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters |
Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 Clause 4.1 (Loss of Ignition , percent by mass) |
1000.0 |
|
| Table 1 Clause 4.1 (Free Lime , Percent by mass) |
1000.0 |
|
| Table 1 Clause 4.1 (Sodium Soluble Salts, expressed as percentage of Na2O) |
1000.0 |
|
| Table 1 Clause 4.1 (Soluble Magnesium salts, expressed as percentage of MgO) |
1500.0 |
|
| Table 1 Clause 4.1 (CaO, Percent by mass) |
1500.0 |
|
| Table 1 Clause 4.1 (SO3, Percent by mass) |
1000.0 |
|
|
| 276 |
IS:16353-2015 -CLINKER - PORTLAND CEMENT CLINKER |
PORTLAND CEMENT CLINKER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 Cl 5 (Ratio of percentage of Alumina to that of Iron Oxide) |
1000.0 |
|
| Table 1 Cl 5 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide) |
1000.0 |
|
| Table 1 Cl 5 (Total sulphur content calculated as sulphuric anhydride (SO3)) |
500.0 |
|
| Table 1 Cl 5 (Free lime, percent by mass,) |
1500.0 |
|
| Table 1 Cl 5 (Chloride content, percent by mass,) |
200.0 |
|
| Table 1 Cl 5 (Magnesia (as MgO), percent by mass) |
1500.0 |
|
| Table 1 Cl 5 (Insoluble residue, percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Total loss on ignition , Percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Silica (as SiO2), Percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Aluminium Oxide (as Al2O3), Percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Iron Oxide (as Fe2O3), Percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Alkali content (as Na2O), percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Alkali Content (as K2O). Percent by mass) |
500.0 |
|
| Table 1 Cl 5 (Calcium Oxide (as CaO), Percent by mass) |
1000.0 |
|
|
| 277 |
11087. (1986) - Specification For Paper For Magnetic Ink Character Recognition Cheque Printing. |
Specification For Paper For Magnetic Ink Character Recognition Cheque Printing. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.4 (Thickness) |
1000.0 |
|
| 3.3 (Substance) |
1000.0 |
|
| 3.6 (Smoothness) |
1000.0 |
|
| 3.6 (Porosity) |
1000.0 |
|
| 3.6 (Opacity) |
2000.0 |
|
| 3.6 (Wax pick) |
2000.0 |
|
| 3.6 (Tearing Strength) |
2000.0 |
|
| 3.6 (Stiffness) |
1000.0 |
|
| 3.9 (Chemical Sensitize Test) |
10000.0 |
|
| Firm's Requirement (Ash Content) |
2000.0 |
|
| Firm's Requirement (Moisture Content) |
1000.0 |
|
| 3.8 (Watermark) |
1000.0 |
|
| Clause 3.1 (Description (Visual and workmanship requirements)) |
1000.0 |
|
| Firm's Requirement (Colour of Paper) |
1000.0 |
|
|
| 278 |
Custom - EN rod DIN1651 |
EN rod DIN1651 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Carbon) |
1200.0 |
|
| 2 (Manganese) |
1200.0 |
|
| 3 (Sulphur) |
1200.0 |
|
| 4 (Phosphorus) |
1200.0 |
|
| 5 (Silicon) |
1200.0 |
|
| 6 (Lead) |
1200.0 |
|
|
| 279 |
IS 15622 Reaffirmed (2017) - Pressed ceramic tiles [All Tests IS 13630] |
Pressed ceramic tiles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Table 5 to 9, Sl.(iii),(a) (Resistance to Staining IS 13630 (8):2019) |
1000.0 |
|
| 6, Table 5 to 9, Sl.(iii),(b) (Resistance to house hold chemicals swimming pools and water cleansing agents containing hydrofluoric acid and its compounds (IS 13630 (8):2019) |
1500.0 |
|
| 6, Table 5 to 9, Sl.(iii),(c) (Resistance to Acid and Alkalies (with exception of hydrofloric acid and its compounds) IS 13630 (8):2019) |
1500.0 |
|
| 6, Table 9, Sl.(iii),(a,b,c) (Chemical properties - unglazed Tiles - IS 13630 (7):2019) |
3000.0 |
|
| 6, Table 5 to 9, Sl.(iii),(a,b,c) (Chemical properties - Glazed Tiles - IS 13630 (8):2019) |
3000.0 |
|
| iii (Chemical Properties [as per IS 13630 (Part 8- Glazed tiles)/ (Part 7 - Unglazed Tiles)]) |
2500.0 |
|
| 4.2 (Water Absorption, %) |
1000.0 |
|
| 4.2 (Crazing) |
1500.0 |
|
| 6, Table 5 (Impact Resistance) |
1000.0 |
|
| 6, Table 5 (Dimensions-Length) |
1000.0 |
|
| 6, Table 5 (Dimensions-Breadth) |
1000.0 |
|
| 6, Table 5 (Dimensions-Thickness) |
1000.0 |
|
| 6, Table 5 (Modulus of Rupture) |
2000.0 |
|
| 6, Table 5 (Breaking Strength) |
2000.0 |
|
| 6, Table 5 (Scratch Hardness) |
2000.0 |
|
| 6, Table 8 & 9 (Bulk Density) |
1000.0 |
|
| 6, Table 5 (Rectangularity) |
500.0 |
|
| 6, Table 5 (Straightness) |
500.0 |
|
| 6, Table 5 (Flatness) |
500.0 |
|
| 6, Table 5 (Modulus of Rupture without Breaking strength) |
3000.0 |
|
| 6, Table 5 (Breaking Strength without MoR) |
3000.0 |
|
|
| 280 |
IS 809 (1992) - Rubber flooring materials for general purposes - Specification (First Revision) |
Rubber flooring materials for general purposes - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Appearance) |
500.0 |
|
| 4.2 (Colour) |
500.0 |
|
| 5.1 (Thickness) |
500.0 |
|
| 5.2 (Tile Size) |
500.0 |
|
| 5.2 (Squareness) |
1000.0 |
|
| 6.1 (Hardness) |
2000.0 |
|
| 6.1.1 (Tolerance on Hardness) |
500.0 |
|
| 6.2 (Water Absorption) |
1000.0 |
|
| 6.3 (Compression Set) |
2000.0 |
|
|
| 281 |
IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386] |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (IS:2386(Pt.-1)_Size and Grading of Aggregates-Sieve Analysis) |
2000.0 |
|
| 5.6 (Alkali aggregate reactivity, m.mol/lit.) |
3000.0 |
|
| 5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %) |
1500.0 |
|
| 5.4.2 (IS:2386(Pt.-4)_Impact Value, %) |
1500.0 |
|
| 5.4.1 (IS:2386(Pt.-4)Crushing Value) |
1500.0 |
|
| 5.3 (Combined Elongation Index and Flakiness Index) |
3000.0 |
|
| 5.2 (Deleterious materials) |
2000.0 |
|
| 5.5 (IS:2386(Pt.-5)_Soundness) |
2000.0 |
|
|
| 282 |
NTH/NR/XR/HDPE Sheathing (2023) - Specification for HDPE Sheathing |
Specification for HDPE Sheathing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Density) |
1000.0 |
|
| 2 (Dimensions) |
1000.0 |
|
| 3 (Wall Thickness) |
1000.0 |
|
| 3 (Tensile Strength) |
1000.0 |
|
| 4 (Elongation) |
1000.0 |
|
| 5 (Shore Hardness) |
1000.0 |
|
| 6 (Melt Flow Index) |
2000.0 |
|
| Firm's Requirement (Charpy Impact Strength) |
3000.0 |
|
|
| 283 |
IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl No. 5 (Test parameters as per attached Annexure B) |
5000.0 |
|
| Cl No. 5 Table 1, 2 & 3 (Test parameters as per attached Annexure A) |
15000.0 |
|
| Cl no 5 Table 3 (All Microbiological parameters (PLEASE SEE THE ANNEXURE)- NABL)) |
5000.0 |
|
| Cl no 5 Table 3 (All Microbiological Parameters (PLEASE SEE THE ANNEXURE)- NON NABL)) |
1.0 |
|
|
| 284 |
MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works
803.4.2 |
Ministry of Road Transport and Highways - Specifications form Road And Bridge Works
803.4.2 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 803.4.2.3 (Free flowing properties) |
500.0 |
|
| 803.4.2.3 (Roundness) |
1000.0 |
|
| 803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088)) |
700.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088)) |
500.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Appearance) |
500.0 |
|
| 803.4.2 (Yellowness Index) |
1000.0 |
|
| 803.4.1.2 (Flow resistance (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Softening point (BS 3262 (Part 1))
ASTM D 36) |
1200.0 |
|
| 803.4.1.2 (Cracking Resistance (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Skid Resistance) |
1000.0 |
|
| 803.4.1.2 (Drying Time) |
1200.0 |
|
| 803.4.1.2 (Luminance (Yellow)) |
1200.0 |
|
| 803.4.1.2 (Luminance (White)
(Daylight luminance at 45 degrees)) |
1200.0 |
|
| 803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Colour) |
1200.0 |
|
| 803.4.1.2 (Titanium Dioxide, as TiO2 % by mass
(BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Glass Bead content % (BS 3262 (Part 1))) |
1200.0 |
|
|
| 285 |
IS 1264 (1997) - Brass gravity die castings - Specification (Fourth Revision) |
Brass gravity die castings - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 Table 1 (Copper) |
1000.0 |
|
| 7.1 Table 1 (Tin) |
500.0 |
|
| 7.1 Table 1 (Lead) |
500.0 |
|
| 7.1 Table 1 (Nickel) |
500.0 |
|
| 7.1 Table 1 (Iron) |
500.0 |
|
| 7.1 Table 1 (Aluminium) |
500.0 |
|
| 7.1 Table 1 (Manganese) |
500.0 |
|
| 7.1 Table 1 (Silicon) |
500.0 |
|
| 7.1 Table 1 (Total Impurities (excluding Ni+Pb+Al)) |
500.0 |
|
| 7.1 Table 1 (Zinc) |
1000.0 |
|
|
| 286 |
IS-9537(Part-II)-1981 Reaff. 2017 - Conduits for Electrical Installations- Rigid Steel Conduits |
Conduits for Electrical Installations- Rigid Steel Conduits |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 287 |
IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Dimensions) |
1000.0 |
|
| 7.4 (Uniformity of Thickness) |
1000.0 |
|
| 8 (Construction) |
1000.0 |
|
| 9.2 (Bending Test) |
2000.0 |
|
| 9.3 (Compression Test) |
2000.0 |
|
| 9.4 (Impact Test) |
2000.0 |
|
| 9.5 (Collapse Test) |
2000.0 |
|
| 11 (Resistance to Burning) |
2000.0 |
|
|
| 288 |
WD-01-HLS-94(Rev-03) (Amdt. No.4 of Oct 2020 Para No: 2.4) - Metallurgical Test of Spring Steel |
Metallurgical Test of Spring Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Chemical Composition As per IS 3195) |
4500.0 |
|
| - (Metallurgical Test) |
23500.0 |
|
|
| 289 |
IS 16172 (2023) - Reinforcement couplers for mechanical splices of bars in concrete - Specification |
Reinforcement couplers for mechanical splices of bars in concrete - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Tensile Strength as per IS 1608(Part 1):2022) |
1500.0 |
|
| 9.2 (Percentage Elongation as per IS 1608(Part 1):2022) |
1500.0 |
|
| 9.2 (Visual Observation for Nature & Location of failure of spliced specimen (With Coupling).) |
1000.0 |
|
| 8 (Chemical composition, % by mass) |
3000.0 |
|
|
| 290 |
NTH/NR/RPPT/Polycarbonate Sheet - Customized specification for Polycarbonate Sheet |
Customized specification for Polycarbonate Sheet |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Firm's Requirement (Length) |
500.0 |
|
| Firm's Requirement (Width) |
500.0 |
|
| Firm's Requirement (Thickness) |
1000.0 |
|
| Firm's Requirement (Melt Flow Index) |
2000.0 |
|
| Firm's Requirement (Luminous Transmittance) |
2000.0 |
|
| Firm's Requirement (Density) |
1000.0 |
|
| Firm's Requirement (Tensile Strength at Yield) |
1000.0 |
|
| Firm's Requirement (Tensile Modulus) |
1000.0 |
|
| Firm's Requirement (Flexural Strength) |
2000.0 |
|
| Firm's Requirement (UV Layer (Top & Bottom)) |
2000.0 |
|
|
| 291 |
NTH/NR/RPPT/Miscellaneous/01 (2023) - Testing of Miscellaneous Items |
Testing of Miscellaneous Items |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Firm's Requirement (Result of Tests) |
25000.0 |
|
| Firm's Requirement (Results of Test (Mechanical)) |
20000.0 |
|
| Firm's Requirement (Results of Test (Electrical)) |
10000.0 |
|
| Firm's Requirement (Results of Test (Chemical)) |
5000.0 |
|
| Firm's Requirement (Density) |
2000.0 |
|
| Firm's Requirement (Thickness) |
1000.0 |
|
| Firm's Requirement (Dimensions) |
5000.0 |
|
| Firm's Requirement (Weight) |
1000.0 |
|
|
| 292 |
IS 9755 (2021) - Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers |
Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (Visual Inspection Test) |
500.0 |
|
| Table-1 (Dimensions) |
1000.0 |
|
| Table-1 (Ends/dm) |
500.0 |
|
| Table-1 (Picks/dm) |
500.0 |
|
| Table-1 (Mass of Fabric) |
1000.0 |
|
| Table-1 (Mass of Sack) |
500.0 |
|
| Table-1 (Breaking Strength (Lengthwise)) |
750.0 |
|
| Table-1 (Breaking Strength (Widthwise)) |
750.0 |
|
| Table-1 (Breaking Strength (Widthwise) of Laminated joint (for laminated sacks)) |
1000.0 |
|
| Table-1 (Breaking Strength of bottom seam) |
1000.0 |
|
| Table-1 (Elongation@break of fabric (Lengthwise)) |
750.0 |
|
| Table-1 (Elongation@break of fabric (Widthwise)) |
750.0 |
|
| Table-1 (Ash Content) |
2000.0 |
|
|
| 293 |
IS 7834 (Part-1) (1987) - INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIE |
INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Size of Fitting) |
500.0 |
|
| 4 (Minimum Thickness) |
500.0 |
|
| 5.1 (Socket Length) |
500.0 |
|
| 5.1.2 (Minimum ID at Mid-Point) |
500.0 |
|
| 5.1.2 (Maximum ID at Mid-Point) |
500.0 |
|
| 6.1 (Stress Relief Test) |
5000.0 |
|
| 6.2 (Opacity (%)) |
1000.0 |
|
| 6.4 (Short Term Hydraulic Test) |
5000.0 |
|
| 6.3 (Effect on Water) |
2000.0 |
|
|
| 294 |
NTH/NR/Cust Spec/T-Shirt/2023/01 - NTH/NR/Cust Spec/T-Shirt/2023/01 |
NTH/NR/Cust Spec/T-Shirt/2023/01 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Mass) |
1000.0 |
|
| 2.0 (Fiber Composition) |
3000.0 |
|
|
| 295 |
IS 15852 (2009) - Textiles – Polyester blended woven shirting for uniforms |
Textiles – Polyester blended woven shirting for uniforms |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Mass) |
2000.0 |
|
| 4 (Fibres composition) |
2000.0 |
|
|
| 296 |
Custom-Mech-NR - Custom-Mech-NR |
Custom-Mech-NR |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| NA (Proof Load Test) |
3000.0 |
|
| NA (Magnetic Particle Test) |
4000.0 |
|
| NA (Ultrasonic Test) |
4000.0 |
|
| NA (Visual Inspection Test) |
1000.0 |
|
| NA (Chemical Composition) |
5000.0 |
|
| NA (Hydrostatic Test) |
5000.0 |
|
| NA (Pneumatic Test) |
5000.0 |
|
| NA (Tensile Test) |
3000.0 |
|
| NA (Test of Polymer) |
8000.0 |
|
| - (Radiography Test) |
2000.0 |
|
| - (Coating Test) |
8000.0 |
|
|
| 297 |
IRSM 28 (2017) - Indian Railway Standard Specification For Classification, Testing And Acceptance Criteria Of Manual Metal Arc Welding Electrodes And Gas Welding Rods |
Indian Railway Standard Specification For Classification, Testing And Acceptance Criteria Of Manual Metal Arc Welding Electrodes And Gas Welding Rods |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| As Per IRSM 28:2017 (Testing of Stainless Steel Flux covered Electrode) |
16500.0 |
|
| NA (Weld Assembly Preparation) |
5000.0 |
|
| 6.2.2 (Table-5) (Transverse Bend Test) |
3000.0 |
|
|
| 298 |
NTH/NR/Cust Spec/UPVC Profile/2023/01 - Customer Specification for UPVC Profiles and Sections |
Customer Specification for UPVC Profiles and Sections |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Vicat Softening Temperature) |
1500.0 |
|
| 2 (Heat Reversion Test) |
2000.0 |
|
| 3 (Titanium Di-oxide) |
1500.0 |
|
| 4 (Calcium Carbonate) |
1500.0 |
|
|
| 299 |
Cust Spfn UPVC Windows/Doors Profile - UPVC Windows/Doors Profile |
UPVC Windows/Doors Profile |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Vicat Softening Temperature at 5kg load) |
1500.0 |
|
| 18 (Heat Reversion Test) |
2000.0 |
|
| 19 (Titanium Di-oxide) |
2000.0 |
|
| 20 (Calcium Carbonate) |
2000.0 |
|
|
| 300 |
1537 - Specification for Vertically cast iron pressure pipes for water, gas and sewage. |
Specification for Vertically cast iron pressure pipes for water, gas and sewage. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Tensile Strength) |
3000.0 |
|
| 4.2 (Brinell Hardness Test) |
2000.0 |
|
| 6 (Hydrostatic Test) |
5000.0 |
|
| 7 (Dimensions) |
1000.0 |
|
| 9 (Mass) |
1000.0 |
|
| 10.4 (Coating Test) |
1000.0 |
|
|
