| 301 |
Customer Specification - WPC - Customer Specification - WPC |
Customer Specification - WPC |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Customer Specified Test parameters (WPC)) |
14500.0 |
|
| 2 (Lead Content (by AAS method)) |
1000.0 |
|
| 3 (Surface Hardness Test (Indentation Test)) |
1000.0 |
|
| 4 (Vicat Softening Temperature, deg.C) |
1500.0 |
|
| 5 (Izod Impact Strength) |
2000.0 |
|
| 6 (Charpy Impact Strength) |
2000.0 |
|
| 7 (Compression Strength test) |
2000.0 |
|
| 8 (Shore (A/D) Hardness Test) |
1000.0 |
|
|
| 302 |
IS 3601 (2006) - Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 13.2 (Flattening test) |
1000.0 |
|
| 13.5 (Drift Expansion) |
1500.0 |
|
| 8 (Straightness) |
- |
|
| 6 (Visual examination) |
1000.0 |
|
| 13.1 (Tensile strength, MPa) |
1000.0 |
|
| 13.1 (Yield stress, MPa) |
1000.0 |
|
| 13.1 (% Elongation) |
1000.0 |
|
| 4 (Chemical composition, % by mass) |
2500.0 |
|
| 10 (Outside diameter, mm) |
1000.0 |
|
| 10 (Thickness, mm) |
1000.0 |
|
| 10 (Weight, kg/m) |
- |
|
|
| 303 |
IS 4923 (2017) - Hollow steel sections for structural use - Specification (Third Revision) |
Hollow steel sections for structural use - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.4 (Concavity and Convexity) |
1000.0 |
|
| 15 (Tensile Strength for Hot formed sections, MPa) |
1000.0 |
|
| 15 (Yield Strength for Hot formed sections, MPa) |
1000.0 |
|
| 15 (Percentage of elongation for Hot formed sections, %) |
1000.0 |
|
| 9.1 (Weight, kg/m) |
1000.0 |
|
| 10.2 (Outside Dimension (B), mm) |
500.0 |
|
| 10.2 (Outside Dimension (H), mm) |
- |
|
| 10.3 (Thickness, mm) |
500.0 |
|
| 10.5 (Squareness of sides, degree) |
1000.0 |
|
| 10.7 (Straightness and Twist) |
1000.0 |
|
| 7 (Chemical Composition % by mass) |
1500.0 |
|
| 15.2 (Elongation, %) |
1000.0 |
|
| 15.2 (Yield Strength, MPa) |
1000.0 |
|
| 15.2 (Tensile Strength, MPa) |
1000.0 |
|
| TR-1 (Presence of Zinc) |
1000.0 |
|
| TR-2 (Coating thickness of inner and outer layers) |
2000.0 |
|
|
| 304 |
IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision ) |
Concrete Mix Proportioning — Guidelines ( Second Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Concrete Mix Design (IS 10262:2019)) |
35000.0 |
|
| 1 (Concrete Mix Proportioning — Guidelines (without admixture)) |
30000.0 |
|
| custom (Chloride content in the Concrete admixture (as per IS 9103:1999)) |
1200.0 |
|
| custom (Chloride content in the concrete-hardened) |
1200.0 |
|
|
| 305 |
28095 - TNTB & ESC Technical Specification for Wollen Sweater (Boys/Girls)- 2023 |
TNTB & ESC Technical Specification for Wollen Sweater (Boys/Girls)- 2023 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Test results (RPPT)) |
13900.0 |
|
| 1.2 (Test Results (Chemical)) |
9000.0 |
|
|
| 306 |
28085 - Customised Specification (Sika) for APP Membrane |
Customised Specification (Sika) for APP Membrane |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test Results) |
29000.0 |
|
|
| 307 |
28087 - TNTB Technical Specification for Raincoat (Unisex)- 2023 |
TNTB Technical Specification for Raincoat (Unisex)- 2023 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Raincoat Test Results) |
4680.5 |
|
|
| 308 |
CUS/SR/MECH-19 (2023) - Manila Rope Slings |
Manila Rope Slings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Breaking load) |
3000.0 |
|
|
| 309 |
CUS/SR/MECH-18 (2023) - Wooden step |
Wooden step |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Breaking load) |
3000.0 |
|
|
| 310 |
School Bag Cust TNTB & ESC (2023) - School Bag Cust TNTB & ESC (2023) |
School Bag Cust TNTB & ESC (2023) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (School Bag Test Result) |
10980.0 |
|
| 4.3.6 (Zip Material-Runner Handle base) |
540.0 |
|
| 4.3.7 (Runner Coating Thickness-Handle, micron) |
900.0 |
|
| 4.3.5 (Runner Coating Thickness -Head, micron) |
900.0 |
|
| 4.3.4 (Zip Material-Runner Head base) |
540.0 |
|
|
| 311 |
NTH/WI/MC (on the lines of IS 4169) 11 (2014) - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines |
Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Force (above 1000 kN to 2000 kN) and deflection measurement calibration) |
25000.0 |
|
|
| 312 |
Customer Specification-Paper (2023) - Cust Spfn Results of the Tests |
Cust Spfn Results of the Tests |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (GSM, g/sq.m) |
1000.0 |
|
| 2 (Burst Index Test) |
2000.0 |
|
| 3 (Tear Index Test) |
2000.0 |
|
| 4 (Tensile Index Test) |
2000.0 |
|
|
| 313 |
2595 (2008) - INDUSTRIAL RADIOGRAPHIC TESTING —CODE OF PRACTICE |
INDUSTRIAL RADIOGRAPHIC TESTING —CODE OF PRACTICE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Radiographic Examination) |
2000.0 |
|
|
| 314 |
IS 4748 (2021) - Steels - Micrographic determination of the apparent grain size (Third Revision) |
Steels - Micrographic determination of the apparent grain size (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 4748 (Grain Size) |
3500.0 |
|
|
| 315 |
Customized Specification for EPDM Rubber (2023) - Customized Specification for EPDM Rubber |
Customized Specification for EPDM Rubber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Hardness Shore A) |
1000.0 |
|
| 1.2 (Polymer Identification (FTIR Method)) |
2000.0 |
|
| 3.0 (Weight) |
1000.0 |
|
| 4.0 (Thickness) |
1000.0 |
|
|
| 316 |
IS 4454 : Part 1 (2001) - Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.3 (Torsion Test) |
1000.0 |
|
|
| 317 |
IS 516 (Part 1/Sec 1) : 2021 (3 set CC cubes) - Hardened Concrete —Methods of Test
(Part 1 Testing of Strength of Hardened Concrete)
(Section 1 Compressive, Flexural and Split Tensile Strength) |
Hardened Concrete —Methods of Test
(Part 1 Testing of Strength of Hardened Concrete)
(Section 1 Compressive, Flexural and Split Tensile Strength) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Compressive strength,MPa) |
3600.0 |
|
|
| 318 |
IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY |
WHITE CEMENT BASED POLYMERIC PUTTY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.5 Table 1(iii) (Initial Setting time-Annex D in minutes) |
200.0 |
|
| 4.5 Table 1(iii) (Final Setting time-Annex D
in minutes) |
200.0 |
|
| 4.6 Optional requirement (Compressive strength, 28 days in N/mm2
(IS 4031 (Part 6))) |
3000.0 |
|
|
| 319 |
IS 1264 (1997) - Brass gravity die castings - Specification (Fourth Revision) |
Brass gravity die castings - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 Table 1 (Copper) |
1000.0 |
|
| 7.1 Table 1 (Tin) |
500.0 |
|
| 7.1 Table 1 (Lead) |
500.0 |
|
| 7.1 Table 1 (Nickel) |
500.0 |
|
| 7.1 Table 1 (Iron) |
500.0 |
|
| 7.1 Table 1 (Aluminium) |
500.0 |
|
| 7.1 Table 1 (Manganese) |
500.0 |
|
| 7.1 Table 1 (Silicon) |
500.0 |
|
| 7.1 Table 1 (Total Impurities (excluding Ni+Pb+Al)) |
500.0 |
|
| 7.1 Table 1 (Zinc) |
1000.0 |
|
|
| 320 |
ASTM - A276/A276M (2010) - Standard Specification for Stainless Steel Bars and Shapes |
Standard Specification for Stainless Steel Bars and Shapes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Carbon) |
1000.0 |
|
| Table 1 (Manganese) |
1000.0 |
|
| Table 1 (Phosphorus) |
1000.0 |
|
| Table 1 (Sulfur) |
1000.0 |
|
| Table 1 (Silicon) |
1000.0 |
|
| Table 1 (Chromium) |
1000.0 |
|
| Table 1 (Nickel) |
1000.0 |
|
| Table 1 (Molybdenum) |
1000.0 |
|
|
| 321 |
IS/IEC60947-1 - Low-voltage switchgear and control gear - Part 1: General rules |
Low-voltage switchgear and control gear - Part 1: General rules |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2.3 & 8.3.3.4 (The dielectric test (Power frequency withstand Test)) |
5000.0 |
|
| 8.3.3.3 (Temperature-rise limits of terminals - Table 2 as per IS/IEC 60947 -Part-1:2004) |
25000.0 |
|
| 10 (Marking) |
- |
|
|
| 322 |
IS/IEC 60898 : PART 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 323 |
1542 (1992) - Sand for Plastering |
Sand for Plastering |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Grading of Sand, (IS 2386 Part 1))) |
2000.0 |
|
| 4.4 (Compressive Strength (IS Appendix A of IS 2250), N/mm^2) |
2000.0 |
|
| 5.2 (Fineness Modulus of sand (IS 2386 (Part 1) from gradation)) |
500.0 |
|
| 4.4.1 (Water Required for Gauging (IS 1727 cl 9.5.3), %) |
1000.0 |
|
| 4.2 (Deleterious Materials, General observation (presence of iron pyrites, alkalies, salts, coal, mica, shale etc. - IS 2386)) |
1000.0 |
|
| 4.3 (Deleterious Materials, (a) Clay, Silt and Dust as per IS 2386 (Part 2) and (b) Organic impurities as per IS 2386 (Part -2 )) |
2000.0 |
|
| 6.2 (Bulk density-loose) |
500.0 |
|
| 6.2 (Bulk density-Compacted) |
500.0 |
|
| 6.2 (Water absorption) |
1000.0 |
|
| 6.2 (Specific gravity) |
500.0 |
|
| 4.1 (General - Visual Observation.) |
500.0 |
|
| custom (Materials finer than 75 microns IS sieve) |
1000.0 |
|
|
| 324 |
CUS/SR/MECH-17 - Aluminium composite panel |
Aluminium composite panel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Total Thickness, mm) |
1000.0 |
|
| 2.0 (Breaking load) |
3000.0 |
|
| 3.0 (Panel Thickness) |
1000.0 |
|
| 4.0 (Weight, kg/m²) |
1000.0 |
|
| 5.0 (Tensile strength, N/mm² (on the lines of IS 1608)) |
1000.0 |
|
| 6.0 (Yield strength, N/mm² (on the lines of IS 1608)) |
1000.0 |
|
| 7.0 (Percentage Elongation, % (on the lines of IS 1608)) |
1000.0 |
|
|
| 325 |
RDSO IRS S 63/2015 : Part 1 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 () |
- |
|
|
| 326 |
RDSO IRS S 63/2014 : Part 0 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Conductor) |
100.0 |
|
| 3.2.1 (Insulation ) |
100.0 |
|
| 3.2.3 (Insulation ) |
100.0 |
|
| 3.2.4 (Insulation ) |
250.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.3.1 (LAYING UP (for power cable only)) |
100.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.4.1 (Inner Sheath) |
100.0 |
|
| 3.5.1 (Armouring) |
100.0 |
|
| 3.5.2 (Armouring (Applicable for power cable only)) |
100.0 |
|
| 3.6.1 (OUTER SHEATH) |
100.0 |
|
| 4.1 (Marking) |
100.0 |
|
| 5.2 (a) (Dimensions) |
1000.0 |
|
| 5.2 (a) (Elongation of annealed copper) |
1000.0 |
|
| 5.2 (b) (Conductor resistance ) |
2000.0 |
|
| 5.2 (c) (Dimensions of Armour Wires) |
1000.0 |
|
| 5.3 (c) (Tensile Strength ) |
1000.0 |
|
| 5.2 (c) (Elongation ) |
1000.0 |
|
| 5.2 (c) (Torsion test) |
1000.0 |
|
| 5.2 (c) (Winding test ) |
1000.0 |
|
| 5.2 (c) (Mass of Zinc coating test) |
1000.0 |
|
| 5.2 (c) (Uniformity of Zinc coating) |
1000.0 |
|
| 5.2 (c) (Resistivity test.) |
1500.0 |
|
| 5.2 (c) (closeness of armour tape) |
100.0 |
|
| 5.2 (d) (Thickness of insulation ) |
500.0 |
|
| 5.2 (d) (Thickness of insulation minimum ) |
500.0 |
|
| 5.2 (d) (Thickness of Outer sheath ) |
500.0 |
|
| 5.2 (d) (Thickness of inner sheath ) |
500.0 |
|
| Cl. 5.2(e)) (Tensile Strength of insulation) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength Insulation variation ) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength inner sheath variation ) |
500.0 |
|
| Cl. 5.2(e) ( Tensile strength outer sheath variartion) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath variation) |
500.0 |
|
| 5.2 (f) (Flammability Test) |
500.0 |
|
| 5.2.g) (High Voltage 4 kV a.c.) |
1500.0 |
|
| 5.2 ( h) (Insulation resistance test ) |
1000.0 |
|
| 5.2 (i) (Water immersion test AC TEST) |
1500.0 |
|
| 5.2 (i) (Water immersion test DC TEST) |
3000.0 |
|
| 5.2 (j) (visual inspection) |
100.0 |
|
| 5.2 (j) (Sequential marking . ) |
100.0 |
|
| 5.5.a) (Depth of indentation) |
1000.0 |
|
|
| 327 |
Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements - Test as per Manufacture Specification |
Test as per Manufacture Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1kVA UPS Test as per Manufacture Specification) |
10000.0 |
|
| 2 (2kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 3 (3kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 4 (5kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 5 (10kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 6 (15kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 7 (20kVA UPS Test as per Manufacture Specification) |
40000.0 |
|
| 8 (Scientist Charges for Onsite Testing per day) |
5000.0 |
|
|
| 328 |
Bituminous Membrane-L-n-T (2022) - Water Proofing Membrane Firms Specification |
Water Proofing Membrane Firms Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Bituminous Membrane Results Attached Annexure) |
21000.0 |
|
|
| 329 |
IBR 1950 (2023) - Qualified Boiler Welder's Certificate |
Qualified Boiler Welder's Certificate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IBR 1950 (Welder qualification) |
4500.0 |
|
| NTH Additional Charges for Testing (Scientist Charges) |
5000.0 |
|
|
| 330 |
IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963) |
2000.0 |
|
| 2 (Test for Specific Gravity
(IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
| 4 (Test for Bulk Density-Loose condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 5 (Test for Bulk Density-Compacted condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 6 (Test for Silt content- (CPWD Specification)) |
1000.0 |
|
| 7 (Deleterious Materials) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 9 (Test for Alkali aggregate reaction- Chemical method
(IS 2386(Part 7):1963)) |
3000.0 |
|
| 10 (Test for bulking of sand) |
1000.0 |
|
| Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT) |
1000.0 |
|
| 5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3) |
1000.0 |
|
| 5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT) |
1000.0 |
|
| 8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963)) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
|
