NTH - Management Information System

National Test House (SR), Chennai

CSIR Road, Tharamani, Chennai - 600113, Chennai, Chennai, Tamil Nadu, 600113

9444380435 director-chn[at]nth[dot]gov[dot]in

Scope List

Reset

619 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

NTH_CUSTOM/2026/011 - Soil

Soil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (pH value )	1000.0
2 (Electrical Conductivity)	1000.0
3 (Organic matter )	1000.0
4 (Total nitrogen )	1000.0
5 (Phosphorous )	1000.0
6 (Potassium)	1000.0

RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Chapter V (Table 1) (Abrasion resistance-1000 cycles)	3000.0
Chapter V (Table 1) (Humidity test.)	11000.0
Chapter V (Table 1) (Durability Tests : Accelerated weathering test)	110000.0
Chapter V (Table 1) (Accelerated Tests Resistance to water)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to solvents)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to oil)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to 20% caustic potash (weight by volume))	1500.0
Chapter V (Table 1) (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume))	1500.0
Chapter V (Table 1) (poly isocyanate, in hardener)	3000.0
Chapter V (Table 1) (Unreacted monomer)	3000.0
Chapter V (Table 1) (Gloss at 60 degree angle of incidence)	1200.0
Chapter V (Table 1) (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	1200.0
Chapter V (Table 1) (Fineness of grind)	1200.0
Chapter V (Table 1) (Theoretical Spreading rate)	1200.0
Chapter V (Table 1) (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter V (Table 1) (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter V (Table 1) (Mass in Kg/10 litres)	1200.0
Chapter V (Table 1) (Keeping Properties for both the packs)	5000.0
Chapter V (Table 1) (Flash Point (b) Component B)	1200.0
Chapter V (Table 1) (Flash Point (a) Component A)	1200.0
Chapter V (Table 1) (Flexibility & Adhesion (6.25mm mandrel))	1200.0
Chapter V (Table 1) (Scratch hardness (1.5 Kg LOAD))	1200.0
Chapter V (Table 1) (Volume solids)	1200.0
Chapter V (Table 1) (Dry film thickness/Per coat)	1200.0
Chapter V (Table 1) (Colour)	1200.0
Chapter V (Table 1) (Finish)	1200.0
Chapter V (Table 1) (Consistency)	1200.0
Chapter V (Table 1) (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter V (Table 1) (Drying time b) Hard Dry)	1200.0
Chapter V (Table 1) (Drying time a) Surface Dry)	1200.0
Chapter V (Table 1) (Identification of polyisocyanates)	3000.0
Chapter IV / Table I (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	1200.0
Chapter IV / Table I (Fineness of grind)	1200.0
Chapter IV / Table I (Theoretical Spreading rate)	1200.0
Chapter IV / Table I (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter IV / Table I (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter IV / Table I (Mass in Kg/10 litres)	1200.0
Chapter IV / Table I (Keeping Properties for both the packs)	5000.0
Chapter IV / Table I (Flash Point (b) Component B)	1200.0
Chapter IV / Table I (Flash Point (a) Component A)	1200.0
Chapter IV / Table I (Flexibility & Adhesion (6.25mm mandrel))	1200.0
Chapter IV / Table I (Scratch hardness (1.5 Kg LOAD))	1200.0
Chapter IV / Table I (Volume solids)	2000.0
Chapter IV / Table I (Dry film thickness/Per coat)	1200.0
Chapter IV / Table I (Colour)	1200.0
Chapter IV / Table I (Finish)	1200.0
Chapter IV / Table I (Consistency)	1200.0
Chapter IV / Table I (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter IV / Table I (Drying time b) Hard Dry)	1200.0
Chapter IV / Table I (Drying time a) Surface Dry)	1200.0
Chapter III/Cl. 2.2.1 (Keeping properties)	5000.0
Chapter III/Cl. 2.2.1 (% solids)	2000.0
Chapter III/Cl. 2.2.1 (Pot life, at 27 ± 2 Deg C,)	1500.0
Chapter III/Cl. 2.2.1 (Adhesion & Compatibility of Paint System)	2000.0
Chapter III/Cl. 2.2.1 (Hold out Property)	1200.0
Chapter III/Cl. 2.2.1 (Rubbing properties)	1200.0
Chapter III/Cl. 2.2.1 (Stopping properties)	1200.0
Chapter III/Cl. 2.2.1 (Consistency)	1200.0
Chapter III/Cl. 2.2.1 (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter III/Cl. 2.2.1 (Drying time b) Hard Dry)	1200.0
Chapter III/Cl. 2.2.1 (Drying time a) Surface Dry)	1200.0
Chapter II/Cl. 4.1 (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	3000.0
Chapter II/Cl. 4.1 (Fineness of grind)	1200.0
Chapter II/Cl. 4.1 (Theoretical Spreading Capacity)	1200.0
Chapter II/Cl. 4.1 (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter II/Cl. 4.1 (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter II/Cl. 4.1 (Mass in Kg/10 litres)	1200.0
Chapter II/Cl. 4.1 (Keeping Properties for both the packs)	5000.0
Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation)	9000.0
Chapter II/Cl. 4.1 (Resistance to salt spray)	21000.0
Chapter II/Cl. 4.1 (Flash Point (b) Component B)	1200.0
Chapter II/Cl. 4.1 (Flash Point (a) Component A)	1200.0
Chapter II/Cl. 4.1 (Flexibility & Adhesion (6.25mm mandrel))	1500.0
Chapter II/Cl. 4.1 (Scratch hardness (1.5 Kg LOAD))	1500.0
Chapter II/Cl. 4.1 (Volume solids)	2000.0
Chapter II/Cl. 4.1 (Dry film thickness/Per coat)	1200.0
Chapter II/Cl. 4.1 (Colour)	1200.0
Chapter II/Cl. 4.1 (Finish)	1200.0
Chapter II/Cl. 4.1 (Consistency)	1200.0
Chapter II/Cl. 4.1 (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter II/Cl. 4.1 (Drying time b) Hard Dry)	1200.0
Chapter II/Cl. 4.1 (Drying time a) Surface Dry)	1200.0
Chapter II/Cl. 3.2.1.2 (Pigment Content)	1500.0
Chapter II/Cl. 3.2.1.1 Table 1 (Weight per epoxy equivalent on non-volatile vehicle content basis)	3000.0

RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR FULL GLOSS POLYSILOXANE BASED ENAMEL (TWO PACK)

SPECIFICATION FOR FULL GLOSS POLYSILOXANE BASED ENAMEL (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max C) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Consistency (IS 101 (Part 1/Sec 5))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Colour (IS 101 (Part 4/Sec 2)))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Dry Film Thickness per coat, minimum (IS 101 (Part 3/Sec 2)-89 By Elcometer)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Volume Solid % min (Appendix-I))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Scratch hardness, (Load 1.5 kg), clause 3 of (IS 101 (Part 5/Sec 2))-88)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flexibility and Adhesion (6.25 mm mandrel), (IS 101 (Part 5/Sec 2))-88)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point a) Component A (IS 101 (Part 1/Sec 6)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point Component B (IS 101 (Part 1/Sec 6)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Fineness of grind, Max (IS 101 (Part 3/Sec. 5)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 40 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Gloss value at 60 Deg angle of incidence, Minimum (IS 101 (Part 4/Sec 4)-88))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties, 18 Months (Appendix-III))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Theoretical Spreading rate, min, Appendix-I)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27 (+/-2 Deg.C.) in supply condition (IS 101 (Part 1/Sec.5)))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests a) Resistance to 30% Sulphuric acid (wt by vol) for 24 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests b) Resistance to 20% caustic potash (wt by vol) for 24 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests c) Resistance to oil for 2 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests d) Resistance to Solvent for 3 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests e) Resistance to Water for 240 hours (Appendix-V))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Durability Tests Accelerated Weathering test, for 1000 hours (Weather-o-meter, Xenon Arc Lamp) (Appendix-VI))	60000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Humidity Tests (on full system) for 4000 hrs (IS 101 (Part 6/Sec 1))	120000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (% Silicone on non-volatile binder basis, (min) (ASTM D 297 & Appendix-VIII)	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Abrasion resistance test with 1.0 kg load & CS-17 Wheels, 1000 cycles, (ASTM D 4060))	3000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Adhesion & Compatibility test on full system (ASTM D 3359 & Appendix-VII))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4) -1987))	1200.0

RDSO Specification No. M&C/PCN/100/2018 - POLYURETHANE SURFACER (TWOPACK)

POLYURETHANE SURFACER (TWOPACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70°C)	3600.0
2 (Consistency)	1200.0
3 (Finish)	1200.0
4 (Colour)	1200.0
5 (Dry film thickness)	1200.0
6 (Volume solids, %)	2000.0
7 (Scratch hardness (1.5Kg Load))	1200.0
8 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
9 (Flashpoint a) Component ‘A’ b) Component ‘B’)	2400.0
10 (Fineness of Grind)	1200.0
11 (Pot life (After induction time) i) 27±2°C ii) 40±2°C)	1500.0
12 (Mass in Kg/10 litres)	1200.0
13 (Keeping properties)	2000.0
14 (Theoretical spreading rate)	2000.0
15 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix of two components at 27± 2 °C in Supply condition)	1200.0

RDSO Specification No. M&C/PCN/100/2018 (2018) - M&C/PCN/100/2018 - Specification for Epoxy Based Zinc Phosphate Primer (Two Pack)

M&C/PCN/100/2018 - Specification for Epoxy Based Zinc Phosphate Primer (Two Pack)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

710 (2024) - Marine Plywood - Specification

Marine Plywood - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (Moisture content [IS 1734 (Part 1)])	1000.0
6 (Dimensions [Length, Width, Thickness, Squareness and Edge Straightness] (IS 710 : 2024))	1000.0
7 (Workmanship and Finish [IS 710 : 2024])	1000.0
9.4.1 (Glue Shear Strength in Dry State [IS 1734 (Part 4)])	2000.0
9.4.2 (Adhesion of Plies in Dry State [IS 1734 (Part 5)])	1000.0
9.5 (Glue Shear Strength after Water Resistance Test [IS 1734 (Part 5)])	2500.0
9.5 / 9.5.1.2 (Adhesion of Plies after Water Resistance Test [IS 1734 (Part 5)])	1000.0
9.7 / 9.5.1.1 (Mycological Test - Glue Shear Strength [IS 1734 (Part 7 and 4)])	1500.0
9.7/ 9.5.1.2 (Mycological Test - Adhesion of Plies [IS 1734 (Part 7 & 5)])	1000.0
9.6 (Tensile Strength- [IS 1734 (Part 9)])	2500.0
9.8 (Static Bending Strength [IS 1734 (Part 11)])	3000.0
9.9 (Wet Bending Strength [IS 710 read with IS 1734 (Part 11)])	3000.0
5.3 / 9.10 (Retention of Preservative [IS 2753 (Part 1 and 2)])	3000.0

Civil lab Training NTH-ER-5 No - Evaluation of Building materials through quality testing and standard specification-an exposure

Evaluation of Building materials through quality testing and standard specification-an exposure

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Evaluation of building materials through quality testing and standard specification-an exposure)	12500.0

Civil lab Training NTH-ER-8 No - Evaluation of Building materials through quality testing and standard specification-an exposure

Evaluation of Building materials through quality testing and standard specification-an exposure

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Evaluation of building materials through quality testing and standard specification-an exposure)	20000.0

Civil lab Training - Evaluation of Building Materials through Quality Testing & Standard specification-Training

Evaluation of Building Materials through Quality Testing & Standard specification-Training

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Training)	5000.0

# IS 7098 (2025) - Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification - Part 1 For Working Voltages up to and including 1100 Volts

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification - Part 1 For Working Voltages up to and including 1100 Volts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
16.1 (ix) (b) (3) (Flame retardance test on single cable - Category C2)	5000.0
16.1 (ix) (b) (4) (Flame retardance test on bunched cables - Category C2)	10000.0
16.1 (ix) (b) (1) (Oxygen index test - Category C2)	5000.0
16.1 (ix) (b) (2) (Temperature index test - Category C2)	5000.0
16.1 (ix) (b) (5) (Smoke density test - Category C2)	5000.0
16.1 (ix) (b) (6) (Test for halogen acid evolution - Category C2)	5000.0
16.1 (i) (a) (Annealing Test (for Copper) - on Conductor)	1000.0
16.1 (i) (b) (Tensile Test (for Aluminium)- on Conductor)	1000.0
16.1 (i) (c) (Wrapping Test (for Aluminium) - on Conductor)	500.0
16.1 (i) (d) (Resistance Test - on Conductor)	2000.0
16.1 (iv) (a) (Tensile strength and elongation at break - for insulation)	1500.0
16.1 (iv) (b) (Ageing in air oven - for insulation)	2000.0
16.1 (iv) (c) (Hot set test - for insulation)	1000.0
16.1 (iv) (d) (Shrinkage test - for insulation)	1000.0
16.1 (iv) (e) (Water absorption (gravimetric) - for insulation)	2000.0
16.1 (v) (a) (1) (Tensile strength and elongation at break - for outer sheath)	1000.0
16.1 (v) (a) (2) (Ageing in air oven - for outer sheath)	1000.0
16.1 (v) (a) (3) (Loss of mass in air oven - for outer sheath)	1000.0
16.1 (v) (a) (4) (Shrinkage Test - for outer sheath)	500.0
16.1 (v) (a) (5) (Hot deformation test - for outer sheath)	500.0
16.1 (v) (a) (6) (Heat shock test - for outer sheath)	500.0
16.1 (v) (a) (7) (Thermal stability - for outer sheath)	1000.0
16.1 (vi) (Insulation resistance (volume resistivity test))	2000.0
16.1 (vii) (High voltage test)	2000.0
16.1 (viii) (Flammability test)	500.0
16.1 (ix) (a) (1) (Oxygen index test - Category C1)	5000.0
16.1 (ix) (a) (2) (Temperature index test - Category C1)	5000.0
16.1 (ix) (a) (3) (Flame retardance test on single cable - Category C1)	5000.0
16.1 (ix) (a) (4) (Flame retardance test on bunched cables - Category C1)	10000.0
16.1 (ii) (Test on Armouring Wire / Strips)	5000.0
Additional Core (---)	2000.0

# IS 6186 - Specification for Bentonite

Specification for Bentonite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Description )	-
4.2 Table 1, SI no (i) (Moisture - Appendix A-2 of IS 6186:1986)	1000.0
4.2 Table 1, SI (ii) (pH - Appendix A-3 of IS 6186:1986 )	1000.0
4.2 Table 1, SI No. (ii) (Gel formation index - Appendix A-4 of IS 6186:1986)	1000.0
4.1 Table 1, IS SI No. (iv) (Swelling power - Appendix A-5 of IS 6186:1986)	1000.0
4.2 Table 1, SI No. (v) (Fineness (a) Dry -150 micron & 75 micron - Appendix A-6 of IS 6186:1986)	500.0
4.2 Table, SI No. (vi) (Fineness (b) Wet- 150 micron & 45 micron - Appendix A-6 of IS 6186:1986)	500.0
4.2 Table 1, SI No. (vii) (Viscosity at 30 deg C, (a) Apparent - Appendix A-7 of IS 6186:`1986)	1000.0
4.2, Table 1, SI No. (viii) (Viscosity at 30 deg C, (b) Plastic - Appendix A-7 of IS 6186:1986)	1000.0
4.2, Table 1, SI No. (ix) (Filtration loss - Appendix A-8 of IS 6186:1986)	2000.0
4.2, Table 1, SI No. (x) (Sand content - Appendix A-9 of IS 6186:1986 )	1000.0
4.2, Table 1, SI No. (xi) (Decolourizing Power - IS 1035:1972)	1000.0
4.2, Table 1, SI No. (xii) (Loss on ignition (other than loss on drying) - Appendix A-10 of IS 6186:1986)	1000.0
4.2 Table 1, SI No. (xiii) (Appendix A-11 of IS 6186:1986)	1000.0
4.2, Table 1, SI No. (xiv) (Copper (as CuO) - Appendix A-12 of IS 6186:1986)	1000.0
4.2, Table 1, SI No. (xv) (Manganese (as MnO) - Appendix A-13 of IS 6186:1986)	1000.0

# IS 15622:2017 - Pressed Ceramic Tiles-Chemical Stain testing

Pressed Ceramic Tiles-Chemical Stain testing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

ND Custom 9 (2023) - Training on Manual Metal Arc welding/ Gas Metal arc Welding

Training on Manual Metal Arc welding/ Gas Metal arc Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Five Days Training Programme on MMAW/GMAW)	5000.0

Custom Specification ER Plastic (2022) - Custom Specification ER Plastic

Custom Specification ER Plastic

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

NTH_CUSTOM/2026/004 - Drainage bay samples

Drainage bay samples

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Grain size analysis/Sieve analysis)	5000.0
4 (Aggregate Impact value)	1500.0
4 & 5 (Combined Flakiness and Elongation Index)	3000.0
custom (Organic Impurity Test and Deleterious substances)	2000.0

NTH_CUSTOM/2026/003 - RS Wall RE fill material

RS Wall RE fill material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Grain size analysis/Sieve analysis)	5000.0
3 (Liquid limit)	1000.0
7 (Plastic limit)	1000.0
8 (Plasticity index)	1000.0
7 (Shrinkage limit)	1000.0
custom (Co-efficient of uniformity (Cu))	1500.0
custom (Co-efficient of Curvature (Cc))	1500.0
custom (Organic Impurity Test and Deleterious substances)	2000.0
7/8 (Compaction Test/Proctor Test/OMC-MDD Test )	5000.0

IS 398 Part 2 (2025) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IS 3025 - Water/Raw water/Sewage/Drainage

Water/Raw water/Sewage/Drainage

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Please see the Annexure)	15000.0
1 (Please see the Annexure)	15000.0

IS 14930(part 2)2001 (2001) - Conduit Systems for Electrical Installation, Part 2: particular requirements conduit systems burried underground.

Conduit Systems for Electrical Installation, Part 2: particular requirements conduit systems burried underground.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 8 (Dimensions)	1000.0
Clause 10 (Mechanical Properties as per specification)	4000.0

IS 2911 (2010) - Design and Construction of Pile Foundation - Drilling Mud (Bentonite)

Design and Construction of Pile Foundation - Drilling Mud (Bentonite)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 [D-3 (a)] (Liquid limit)	1000.0
7.4 [D-3 (b)] (Density)	1000.0
7.4 [D-3 (c)] (Marsh Viscosity)	1000.0
7.4 [D-3 (d)] (pH Value)	1000.0

IS 6186 (1986) - Specification for Bentonite (First Revision)

Specification for Bentonite (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (i) (Moisture, percent by mass)	1000.0
4.2 (ii) (pH)	500.0
4.2 (viii) (Sand content, percent by mass)	1000.0
4.4 (i) (Loss on ignition (other than loss on drying), percent by mass)	1000.0
4.4 (ii) (Matter soluble in water, percent by mass)	1000.0

IS 10500: 2012 - Drinking water

Drinking water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IS 14930 : Part 2 (2001) - Conduit Systems for Electrical Installations - Part 2 : Particular Requirements - Conduit Systems Burried Underground

Conduit Systems for Electrical Installations - Part 2 : Particular Requirements - Conduit Systems Burried Underground

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 8 (Dimensions)	2000.0
Clause 10.2 (Compression Test)	2000.0
Clause 10.3 (Impact Test)	2000.0

RDSO/2020/GE:IRS-0004/September 2020 (Including ACS No 01 dated 16.12.2021) - Comprehensive guidelines and Specifications for Railway formation

Comprehensive guidelines and Specifications for Railway formation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3.2.C.1 (The Uniformity of Co-efficient(Cu):(as per IS 2720(1)1983/IS 1498:1970))	1500.0
7.3.2.C.1 (The Co-efficient of Curvature -Cc (IS 2720(1):1983/IS 1498(1970))	1500.0
7.3.2.C.1 (Percentage of Fines(Passing 75 micron)-IS 2720(1):1983/IS 1498:1970)	1000.0
7.3.2.C.2 (CBR test)	6000.0
7.3.2.C.3 (Los angeles abrasion value)	1500.0
7.3.2.C.6 (Checking of forming with enveloping curves)	2000.0
6.2.8.C (OMC &MDD (IS 2720(8)):1983)	5000.0

IRS T-44-2023 - IRS T-44-2023

IRS T-44-2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IRS T-44 (2023) - HIGH VISCOUS NYLON-66 INSULATING LINERS

HIGH VISCOUS NYLON-66 INSULATING LINERS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Specific Gravity)	1000.0
7.5 (Internal Cavity Test)	1000.0
Table 1B (Tensile Strength)	2000.0
Table 1B (Ash Content)	1000.0

7098 : Part 1 : 2025 - Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification - Part 1 For Working Voltages up to and including 1 100 Volts

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification - Part 1 For Working Voltages up to and including 1 100 Volts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Type Tests(3.5 Core/4 Core) (Type Tests,Category-01.)	29500.0
Tests(3Core) (Type Tests,Category-01.)	27500.0

IS 1121-1126 Natural building stones-Methods of Tests - Natural building stones-Methods of Tests

Natural building stones-Methods of Tests

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1121 : Part 2 : 2023 (Transverse Strength)	3000.0
IS 1121 : Part 3 : 2023 (Indirect Tensile Strength)	3000.0
IS 1121 : Part 4 : 2013 (Shear Strength)	2000.0
IS 1122 : 2023 (True Specific Gravity)	1000.0
IS 1124 : 1974 (Water absorption)	1000.0
IS 1124:1974 (Apparent specific gravity)	1000.0
IS 1124:1974 (Porosity)	998.0
IS 1126:2013 (Durability)	2000.0
IS 1706 : 2024 (Resistance to wear by abrasion)	4000.0
IS 1121(1):2023 (Uniaxial Compressive Strength)	3000.0

RDSO/M&C/RP-198 (2006) - COMPOSITE GROOVED RUBBER SOLE PLATES FOR PLACING BENEATH RAILS

COMPOSITE GROOVED RUBBER SOLE PLATES FOR PLACING BENEATH RAILS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2.2 (Ash Content)	2000.0
3.2.2 (Specific Gravity)	1000.0

IS 4021:1995 (Reaffirmed 2022) - Timber Door, Window and Ventilator Frames

Timber Door, Window and Ventilator Frames

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Specific Gravity / Density, g/cc (kg/cum))	1000.0
4.1.2 (Moisture Content, %)	1000.0
6.2 (Size and Type)	1000.0
6.1 (Dimensions of Frame and Tolerances, in mm)	1000.0
4.1.4 & 4.1.5 (Materials-Defects Prohibited & Permitted)	3000.0
5 (Construction & Workmanship)	1000.0
7 (Location of Holdfasts)	500.0
8 (Finish)	500.0
custom (Tensile strength-Parallel to grain (as per IS 1708(12)-1986))	2000.0
custom (Static bending strength-Modulus of rupture (MOR) & Modulus of Elasticity (MOE) -IS : 1708 ( Part 5 ) - 1986)	3000.0

1
2
3
Next
Last