| 541 |
IS 16098 Part 1 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.3 (Ring Flexibility) |
1500.0 |
|
| 9.2 (Resistance to External Blows) |
2000.0 |
|
| 9.1 (Ring Stiffness) |
1500.0 |
|
| 8.3 (Effect of Heating (Stress Relief Test)) |
2000.0 |
|
| 8.2 (VST for Fittings) |
1500.0 |
|
| 8.1 (Appearance and Color of Fittings) |
1000.0 |
|
| 7.5 (Longitudinal Reversion) |
2000.0 |
|
| 7.3 (Vicat Softening Temperature) |
1500.0 |
|
| 7.2 (Colour) |
1000.0 |
|
| 7.1 (Appearance) |
1000.0 |
|
| 6.3.4.3 (Rotational Molding Fittings) |
1000.0 |
|
| 6.3.4.2 (Fabricated Fitings) |
1000.0 |
|
| 6.3.4.4 (Type of Fittings) |
1000.0 |
|
| 6.3.4.1 (Wall Thickness of Sockets) |
1000.0 |
|
| 6.3.3 (Length) |
1000.0 |
|
| 6.3.2 (Wall Thickness) |
1000.0 |
|
| 6.3.1 (Outside Dia) |
1000.0 |
|
|
| 542 |
IS 13592 (2013 (RA 2018)) - Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11 (Water tightness of joints) |
5000.0 |
|
| 10.3 (Axial Shrinkage) |
2000.0 |
|
| 10.2 (Tensile strength) |
2000.0 |
|
| 10.1 (Impact Strength) |
2000.0 |
|
| 9 (Resistance to Sulphuric Acid) |
2000.0 |
|
| 8.5 (Effect of Sunlight) |
3000.0 |
|
| 8.4 (Vicat Softening Temperature) |
1500.0 |
|
| 8.3 (Stress relief test) |
2000.0 |
|
| 8.2 (Reversion test) |
2000.0 |
|
| 8.1 (Visual Appearance) |
1000.0 |
|
| 7 (Dimensions (Outside Diameter, Wall thickness)) |
1000.0 |
|
| 7.1 (Outside diameter at any point) |
1000.0 |
|
| 7.1 (Wall Thickness) |
1000.0 |
|
| 10.1 (Resistance to External Blow at 0°C (Impact Test)) |
2000.0 |
|
| Firm's Request (Density) |
1000.0 |
|
| Firm's Request (Fitment Test) |
2000.0 |
|
| Firm's Request (Flattening Test) |
2000.0 |
|
|
| 543 |
IS 191 (2007) - Copper - Specification (Fourth Revision) |
Copper - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Zinc ) |
1000.0 |
|
| 7.1 (Tin ) |
1000.0 |
|
| 7.1 (Lead ) |
1000.0 |
|
| 7.1 (Bismuth) |
1000.0 |
|
| 7.1 (Antimony) |
1000.0 |
|
| 7.1 (Arsenic ) |
2000.0 |
|
| 7.1 (Nickel ) |
1000.0 |
|
| 7.1 (Sulphur) |
1000.0 |
|
| 7.1 (Iron ) |
1000.0 |
|
| 7.1 (Phosphorus ) |
1000.0 |
|
| 7.1 (Silver ) |
1000.0 |
|
| 7.1 (Copper + Silver ) |
2000.0 |
|
| 7.1 (Selenium) |
1000.0 |
|
|
| 544 |
IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Marking, manufacturer's name/trade mark, Visual verification (Naked Eye)) |
- |
|
| 6.4 (Durability of Marking) |
- |
|
| 7 (Verification of dimensions with gauges of conduit pipe and Checking of dimensions of the socket end) |
2000.0 |
|
| 7.4 (Uniformity of Wall Thickness) |
- |
|
| 8 (Construction) |
- |
|
| 9.2 (Bending Test at room temperature) |
2000.0 |
|
| 9.2.1 (Bending test at low temperature) |
2000.0 |
|
| 9.3 (Compression Test (Compression under load)) |
2000.0 |
|
| 9.3.1 (Compression test (Permanent set)) |
2000.0 |
|
| 9.4 metal (Impact Test) |
3000.0 |
|
| 9.5 metal (Collapse Test) |
2000.0 |
|
| 10 (Resistance to Heat) |
2000.0 |
|
| 11 (Resistance to Burning) |
2000.0 |
|
| 12.1 (12.1.1 of IS:9537-Part I Electrical Strength) |
2000.0 |
|
| 12 (12.1.2 Of IS:9537-Part I Insulation Resistance) |
2000.0 |
|
|
| 545 |
IS 2547 : Part 1 (1976) - Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters |
Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (Setting Time) |
500.0 |
|
| 5.2 (Residue on sieving) |
500.0 |
|
| 5.2 (Transverse Strength) |
1000.0 |
|
| 5.2 (Soundness) |
500.0 |
|
| 5.2 (Expansion on setting) |
500.0 |
|
| Table 1 Clause 4.1 (Loss of Ignition , percent by mass) |
1000.0 |
|
| Table 1 Clause 4.1 (Sodium Soluble Salts, expressed as percentage of Na2O) |
1000.0 |
|
| Table 1 Clause 4.1 (Soluble Magnesium salts, expressed as percentage of MgO) |
1500.0 |
|
| Table 1 Clause 4.1 (CaO, Percent by mass) |
1500.0 |
|
| Table 1 Clause 4.1 (SO3, Percent by mass) |
1000.0 |
|
| 5.2 (Mechanical resistance of set neat plaster) |
500.0 |
|
|
| 546 |
IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite |
Polished Building Stones: Part 1 Granite |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Hardness) |
2000.0 |
|
| 5 (Porosity) |
1000.0 |
|
| 5 (Water absorption) |
1000.0 |
|
| 5 (Specific gravity) |
1000.0 |
|
| 5 (Dry density ) |
1000.0 |
|
| 5 (Moisture content) |
500.0 |
|
| 4 (Dimensions) |
500.0 |
|
| 5 (Compressive strength) |
2000.0 |
|
| 5 (Resistance to wear) |
4000.0 |
|
|
| 547 |
IS 318 (1981) - Specification for leaded tin bronze ingots and castings (Second Revision) |
Specification for leaded tin bronze ingots and castings (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 548 |
IS 516 : Part 4 (2018) - Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018) |
Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Equivalent Cube Strength of Concrete core 1 set IS 516 (Part 4):2018) |
4000.0 |
|
|
| 549 |
IS 3975 (1999) - Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision) |
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.1 & 9.3 (Uniformity of Coating) |
2000.0 |
|
| 9.1 & 9.2 (Mass of Zinc Coating) |
1000.0 |
|
|
| 550 |
IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Phosphorus) |
500.0 |
|
| 6 (Sulphur) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 6 (Copper) |
500.0 |
|
| 6 (Carbon) |
500.0 |
|
|
| 551 |
IS 3812 : Part 2 (2013) - Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 7.1 (Fineness — Specific surface by Blaine’s permeability method) |
1000.0 |
|
| 5.1 ,6.1 (Loss on ignition) |
500.0 |
|
| 5.1 ,6.1 (Total Chlorides) |
500.0 |
|
| 5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O)) |
500.0 |
|
| 5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3)) |
500.0 |
|
| 5.1 ,6.1 (Magnesium oxide(MgO)) |
500.0 |
|
| 5.1 ,6.1 (Reactive Silica) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2)) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3)) |
500.0 |
|
|
| 552 |
IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386] |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (IS:2386(Pt.-1)_Size and Grading of Aggregates-Sieve Analysis) |
2000.0 |
|
| 5.4.2 (IS:2386(Pt.-4)_Impact Value, %) |
1500.0 |
|
| 5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %) |
1500.0 |
|
| 5.4.1 (IS:2386(Pt.-4)Crushing Value) |
1500.0 |
|
| 5.7 (Specific gravity) |
500.0 |
|
| 5.7 (Water absorption) |
1000.0 |
|
| 5.6 (Alkali aggregate reactivity, m.mol/lit.) |
3000.0 |
|
| 5.2 (Deleterious materials) |
2000.0 |
|
| 5.7 (Total alkali content as Na2O) |
1200.0 |
|
| 5.7 (Total sulphate content as SO3) |
1200.0 |
|
| 5.7 (Water soluble chloride content) |
1200.0 |
|
| 5.5 (IS:2386(Pt.-5)_Soundness) |
2000.0 |
|
| custom (Micro fines content) |
1000.0 |
|
| custom (Test for Silt content(CPWD specification)) |
1000.0 |
|
| custom (Bulk density-loosely packed) |
500.0 |
|
| custom (Bulk density-compacted) |
500.0 |
|
| - (Bulking of sand) |
1000.0 |
|
| custom (Density) |
1000.0 |
|
| 5.4.1 (Fines value) |
1500.0 |
|
| 5.3 (Combined Elongation Index and Flakiness Index) |
3000.0 |
|
| Custom (Silica as SiO2) |
1000.0 |
|
| Custom (Alumina as Al2O3) |
1000.0 |
|
| Custom (Calcium as CaO) |
1000.0 |
|
| Custom (Magnesium as MgO) |
1000.0 |
|
| - - (Sulphur as SO3) |
1000.0 |
|
| - - (Water Soluble Chloride as Cl) |
1000.0 |
|
| Custom (Water soluble Sodium as Na2O) |
1000.0 |
|
| Custom (Water soluble Potassium as K2O) |
1000.0 |
|
| Custom (Iron as Fe2O3) |
1000.0 |
|
| 5.3 (IS:2386(Pt.-1)_Flakiness Index) |
1500.0 |
|
| 5.3 (IS:2386(Pt.-1)_Elongation Index) |
1500.0 |
|
| - (Organic impurities) |
1000.0 |
|
| 5.5 (IS 2386 (Part 5)_Soundness) |
2000.0 |
|
| Custom (Loss on Ignition) |
1000.0 |
|
| Custom (Sodium as Na2O) |
1000.0 |
|
| Custom (Potassium as K2O) |
1000.0 |
|
| Custom (Nitrogen as N) |
1000.0 |
|
|
| 553 |
IS 12330 (1988) - Specificatioon for sulphate resisting Portland cement |
Specificatioon for sulphate resisting Portland cement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5 (Compressive strength,672±4 h) |
1000.0 |
|
| 5.5 (Compressive strength,168±2 h) |
1000.0 |
|
| 5.5 (Compressive strength,72±1 h) |
1000.0 |
|
| 5.3 (Setting time,Final) |
250.0 |
|
| 5.3 (Setting time Initial) |
250.0 |
|
| 5.2 (Soundness-autoclave method) |
1000.0 |
|
| 5.2 (Soundness-Lechatlier method) |
500.0 |
|
| 4.1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide) |
3000.0 |
|
| 4.1 (Insoluble residue) |
1000.0 |
|
| 4.1 (Magnesia) |
1000.0 |
|
| 4.1 (Total Sulphur content calculated as sulphuric anhydride (SO3)) |
1000.0 |
|
| 4.1 (Tricalcium aluminate (C3A)) |
2000.0 |
|
| 4.1 (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate (C4AF+2C3A)) |
2000.0 |
|
| 4.1 (Total Loss on ignition) |
1000.0 |
|
| - (Consistency(%):) |
500.0 |
|
| 5.4 (Sulphate expansion) |
1500.0 |
|
|
| 554 |
IS 3812 (Part 1) (2013) - Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Compressive strength at 28 days ) |
3000.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 7.1 (Fineness — Specific surface by Blaine’s permeability method) |
1000.0 |
|
| 7.1 ( Lime reactivity — Average compressive strength ) |
3000.0 |
|
| 5.1 ,6.1 (Loss on ignition) |
500.0 |
|
| 5.1 ,6.1 (Total Chlorides) |
500.0 |
|
| 5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O)) |
500.0 |
|
| 5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3)) |
500.0 |
|
| 5.1 ,6.1 (Magnesium oxide(MgO)) |
500.0 |
|
| 5.1 ,6.1 (Reactive Silica) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2)) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3)) |
500.0 |
|
|
| 555 |
IS 15489 (2013) - Paint, plastic emulsion - Specification (First Revision) |
Paint, plastic emulsion - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.12 (Toxic metals such
as lead, cadmium, chromium (VI)) |
3600.0 |
|
| 6.12 (Volatile organic compounds,) |
2000.0 |
|
| 6.1 (Keeping properties) |
5000.0 |
|
| 6.5 (Mass in kg/10 litre (IS 101 (Part 1/Sec 7))) |
500.0 |
|
| 6.11 (Recoating properties, (Annexure J of IS 15489:2013)) |
2000.0 |
|
| 6.11 (Washability and cleanability (Annexure G of IS 15489:2013)) |
1900.0 |
|
| 6.11 (Resistance to alkali (Annexure F of IS 15489:2013)) |
500.0 |
|
| 6.11 (Colour (Annexure E of IS 15489:2013)) |
100.0 |
|
| 6.11 (Gloss at 60 degree d) Class D, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree c) Class C, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree b) Class B, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree a) Class A (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Finish (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Consistency (Annexure B of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Hard dry (Class C and D) (Annexure D of IS 15489:2013)) |
200.0 |
|
| 6.11 (Drying time a) Hard dry (Class A and B) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Surface dry (Class C and D) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Surface dry (Class A and B) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.9 (Lead Restriction) |
1000.0 |
|
| 6.7 & 6.11 (Fastness to Light (Xenon Arc apparatus for 500 hrs)
(IS 101 Part 4/ Sec 3)) |
15000.0 |
|
| 6.6 (Opacity (IS 101 ( Part 1/Sec 3))) |
1000.0 |
|
| 6.2 (Conditions in the Container) |
200.0 |
|
| 6.3 (Thinning) |
1000.0 |
|
| 6.4 (Application Properties) |
700.0 |
|
| Table 1, Sl No. (ii)(a) (Drying time, Surface Dry) |
1200.0 |
|
| Table 1, Sl No. (ii)(b) (Drying time, Hard dry) |
1200.0 |
|
| 6.11 (Temperature stability test
-5 ± 1 °C, 60 ± 2 °C) |
1000.0 |
|
| 6.11 (Gloss at 60 deg) |
1200.0 |
|
|
| 556 |
IS 2074 (2015) - Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification |
Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.6, xii (Keeping properties) |
5000.0 |
|
| 5.6,xi (Accelerated storage stability test) |
200.0 |
|
| 5.6,x.c (Resistance to salt spray) |
500.0 |
|
| 5.6,x.b (Resistance to sea water (applicable for marine paints only)) |
50.0 |
|
| 5.6,x.a (Resistance to humidity) |
2500.0 |
|
| 5.6,ix (Volume solids) |
200.0 |
|
| 5.6,viii (Flash point) |
500.0 |
|
| 5.6,vii.b (Flexibility and adhesion: Scratch hardness (load 1000g)) |
100.0 |
|
| 5.6,vii.a (Flexibility and adhesion:Bend test (with 6.25 mm dia mandrel and in type 1 apparatus)) |
100.0 |
|
| 5.6,vi (Colour) |
50.0 |
|
| 5.6,v (Fineness of grind, microns) |
100.0 |
|
| 5.6,iv.b (Gloss, 60º) |
100.0 |
|
| 5.6,iv.a (Finish) |
100.0 |
|
| 5.6,iii.b (Drying: hard dry) |
100.0 |
|
| 5.6,iii.a (Drying: Surface dry) |
100.0 |
|
| 5.6,ii (Mass, kg/10litre) |
200.0 |
|
| 5.6,i. b (Viscosity by Ford cup No. 4 at 27 ± 2°C) |
200.0 |
|
| 5.6,i. a (Consistency) |
200.0 |
|
| 5.5 (Lead Restriction) |
200.0 |
|
| 5.3 (Compatibility with thinner) |
200.0 |
|
| 5.1.2 (Volatile vehicle) |
200.0 |
|
| 5.1.1.b (Synthetic red oxides of iron red
oxide (as Fe2O3)) |
1000.0 |
|
| 5.1.1.a (zinc oxide) |
500.0 |
|
| 5.1.1.a (chromic anhydride) |
1000.0 |
|
| 5.1.1.a (Zinc chrome) |
500.0 |
|
| 5.1.a (Pigment, percent by mass) |
1200.0 |
|
|
| 557 |
IS 427 (2013) - Distemper, dry, colour as required - Specification (Third Revision) |
Distemper, dry, colour as required - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 558 |
IS 8084 (1976) - Specification for interconnecting bus - Bars for ac voltage above 1 kV up to and including 36 kV |
Specification for interconnecting bus - Bars for ac voltage above 1 kV up to and including 36 kV |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (@250A) |
12500.0 |
|
| 4 (@500A) |
15000.0 |
|
| 4 (@1000A) |
17500.0 |
|
| 4 (@1500A) |
20000.0 |
|
| 4 (@2000A) |
25250.0 |
|
| 4 (@2500A) |
25000.0 |
|
| 4 (@3000A) |
27500.0 |
|
| 4 (@3500A) |
30000.0 |
|
|
| 559 |
IS 9000 : Part V : Sec 2 (1981) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Damp (Cycle ) Test) |
20000.0 |
|
|
| 560 |
IS 9000 : Part V : Sec 1 (1981) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Damp (Cycle ) Test) |
20000.0 |
|
|
| 561 |
IS 9000 : Part II : Sec 2 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Cold Test for non heating dissipating items with sudden change of temperature) |
20000.0 |
|
|
| 562 |
IS 9000 : Part III : Sec 5 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dry Heat Test) |
10000.0 |
|
|
| 563 |
IS 9000 : Part III : Sec 4 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dry Heat Test) |
20000.0 |
|
|
| 564 |
IS 9000 : Part III : Sec 3 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dry Heat Test) |
20000.0 |
|
|
| 565 |
IS 9000 : Part III : Sec 2 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dry Heat Test) |
20000.0 |
|
|
| 566 |
IS 1554 : Part 1 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1 (Type Test - Single Core Non-Mining) |
20000.0 |
|
| 15.1 (Type Test - Two core Non-Mining) |
22000.0 |
|
| 15.1 (Type Test (Two core FRLS Cable)) |
40000.0 |
|
| 18.2 (Marking) |
2000.0 |
|
| 17.3 (Cable identification) |
100.0 |
|
| 17.1 (Manufacturer identification) |
100.0 |
|
| 15.2 (Acceptance tests - Two core Non-Mining) |
13500.0 |
|
| 15.2 (Acceptance tests(Single core FRLS Cable)) |
11500.0 |
|
| 15.1.1 & 15.2.1 (FRLSH for all type of samples) |
20000.0 |
|
| 15.2 (h) (High Voltage AC) |
1000.0 |
|
| 15.1(a).1 (Annealing test ( for copper )) |
1000.0 |
|
| 15.1 (h) (Flammability test-Sheath) |
3500.0 |
|
| 15.1 (h) (Flammability test-Insulation) |
250.0 |
|
| 15.1 (e) (Insulation resistance constant at maximum rated temperature ) |
1000.0 |
|
| 15.1 (e) (Volume resistivity at maximum rated temperature) |
500.0 |
|
| 15.1 (e) (Insulation resistance constant at ambient temperature) |
500.0 |
|
| 15.1 (e) (Volume resistivity at ambient temperature ) |
500.0 |
|
| 15.1 (d) 7 (Thermal stability-Sheath) |
500.0 |
|
| 15.1 (d) 7 (Thermal stability-Insulation) |
500.0 |
|
| 15.1 (d) 3 (Shrinkage test-Sheath) |
500.0 |
|
| 15.1.1.c2 (a) (Oxygen index ) |
3500.0 |
|
| 15.1 (e) (Insulation resistance constant at ambient temperature) |
500.0 |
|
| 15.1 (e) (Insulation resistance constant at maximum rated temperature ) |
500.0 |
|
| 15.1.1.c1 (d) (Temperature index) |
3500.0 |
|
| 15.2.1.c1 (a) (Oxygen index ) |
3500.0 |
|
| 15.2.1.c2 (e) (Smoke density rating) |
3500.0 |
|
| 15.2.1.c2 (d) (Halogen acid gas evaluation) |
2000.0 |
|
| 15.1(a).1 (Annealing test ( for copper )) |
1000.0 |
|
| 15.1(a).2 (Tensile test ( for aluminium )) |
1000.0 |
|
| 15.1(a).3 (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.1(a).4 (Conductor resistance-Red ) |
500.0 |
|
| 15.1(a).4 (Conductor resistance-Yellow ) |
500.0 |
|
| 15.1(a).4 (Conductor resistance-Blue) |
500.0 |
|
| 15.1(a).4 (Conductor resistance-Black ) |
500.0 |
|
| 15.2 (e) (Average thickness of sheath) |
250.0 |
|
| 15.2 (e) (Average thickness of insulation) |
250.0 |
|
| 15.2 (e) (Minimum thickness of sheath) |
250.0 |
|
| 15.1 (d) 2 (Tensile strength at break-R) |
250.0 |
|
| 15.1 (d) 2 (Tensile strength at break-Y) |
250.0 |
|
| 15.1 (d) 2 (Tensile strength at break-B) |
250.0 |
|
| 15.1 (d) 2 (Tensile strength at break-Black) |
250.0 |
|
| 15.1 (d) 2 (Elongation at break-R) |
250.0 |
|
| 15.1 (d) 2 (Elongation at break-Y) |
250.0 |
|
| 15.1 (d) 2 (Elongation at break-B) |
250.0 |
|
| 15.1 (d) 2 (Elongation at break-Black) |
250.0 |
|
| 15.1(d) 2 (Tensile strength,variation-R) |
250.0 |
|
| 15.1(d) 2 (Tensile strength,variation-Y) |
250.0 |
|
| 15.1(d) 2 (Tensile strength,variation-B) |
250.0 |
|
| 15.1(d) 2 (Tensile strength,variation-Black) |
250.0 |
|
| 15.1(d) 2 (Tensile strength,variation-Sheath) |
250.0 |
|
| 15.1(d) 2 (Elongation ,variation-R) |
250.0 |
|
| 15.1(d) 2 (Elongation ,variation-Y) |
250.0 |
|
| 15.1(d) 2 (Elongation ,variation-B) |
250.0 |
|
| 15.1(d) 2 (Elongation ,variation-Black) |
250.0 |
|
| 15.1(d) 2 (Elongation ,variation-Sheath) |
250.0 |
|
| 15.1 (d) 3 (Shrinkage test-Insulation) |
500.0 |
|
| 15.1 (d) 3 (Shrinkage test-Sheath) |
500.0 |
|
| 15.1 (d) 4 (Hot deformation-Insulation) |
500.0 |
|
| 15.1 (d) 4 (Hot deformation-Sheath) |
500.0 |
|
| 15.1 (d) 5 (Loss of mass in air oven-Insulation) |
1500.0 |
|
| 15.1 (d) 5 (Loss of mass in air oven-Sheath) |
1500.0 |
|
| 15.1 (d) 6 (Heat shock test-Insulation) |
500.0 |
|
| 15.1 (d) 6 (Heat shock test-Sheath) |
500.0 |
|
| 15.1 (d) 7 (Thermal stability-Insulation) |
500.0 |
|
| 15.1 (d) 7 (Thermal stability-Sheath) |
500.0 |
|
| 15.1 (e) (Volume resistivity at ambient temperature ) |
500.0 |
|
| 15.1 (e) (Insulation resistance constant at ambient temperature) |
500.0 |
|
| 15.1 (e) (Volume resistivity at ambient temperature ) |
500.0 |
|
| 15.1 (e) (Volume resistivity at maximum rated temperature) |
500.0 |
|
| 15.1 (f) (High Voltage AC) |
1000.0 |
|
| 15.1 (f) (High Voltage DC) |
2000.0 |
|
| 15.1 (g) (High Voltage AC) |
1000.0 |
|
| 15.1 (h) (Flammability test-Insulation) |
250.0 |
|
| 15.1 (h) (Flammability test-Sheath) |
250.0 |
|
| 15.1.1.c1 (a) (Oxygen index ) |
3500.0 |
|
| 15.1.1.c1 (c) (Flame retardance test on bunched cable) |
3500.0 |
|
| 15.1.1.c1 (b) (Flame retardance test on single cable) |
3500.0 |
|
| 15.1.1.c1 (d) (Temperature index) |
3500.0 |
|
| 15.1.1.c1 (c) (Flame retardance test on bunched cable) |
3500.0 |
|
| 15.1.1.c2 (c) (Flame retardance test on bunched cable) |
3500.0 |
|
| 15.1.1.c2 (d) (Optical density of smoke) |
3500.0 |
|
| 15.1.1.c2 (e) (Smoke density rating) |
3500.0 |
|
| 15.1.1.c2 (f) (Halogen acid gas evaluation) |
3500.0 |
|
| 15.1.1.c2 (g) (Temperature index) |
3500.0 |
|
| 15.2 (a) (Annealing test ( for copper )) |
1000.0 |
|
| 15.2 (b) (Tensile test ( for aluminium )) |
1000.0 |
|
| 15.2 (c) (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.2 (c) (Conductor resistance-Red ) |
500.0 |
|
| 15.2 (c) (Conductor resistance-Yellow ) |
500.0 |
|
| 15.2 (c) (Conductor resistance-Blue) |
500.0 |
|
| 15.1(a).4 (Conductor resistance-Black ) |
500.0 |
|
| 15.2 (e) (Average thickness of sheath) |
250.0 |
|
| 15.2 (e) (Average thickness of insulation) |
250.0 |
|
| 15.2 (f) (Tensile strength at break-R) |
250.0 |
|
| 15.2 (f) (Tensile strength at break-Y) |
250.0 |
|
| 15.2 (f) (Tensile strength at break-B) |
250.0 |
|
| 15.2 (f) (Tensile strength at break-Black) |
250.0 |
|
| 15.2 (f) (Elongation at break-R) |
250.0 |
|
| 15.2 (f) (Elongation at break-Y) |
250.0 |
|
| 15.2 (f) (Elongation at break-B) |
250.0 |
|
| 15.2 (f) (Elongation at break-Black) |
250.0 |
|
| 15.2 (g) (Volume resistivity at ambient temperature ) |
500.0 |
|
| 15.2 (g) (Insulation resistance constant at ambient temperature) |
500.0 |
|
| 15.2 (g) (Volume resistivity at maximum rated temperature) |
500.0 |
|
| 15.2 (g) (Insulation resistance constant at maximum rated temperature ) |
500.0 |
|
| 15.2 (h) (High Voltage AC) |
1000.0 |
|
| 15.2.1.c1 (a) (Oxygen index ) |
3500.0 |
|
| 15.2.1.c1 (b) (Flame retardance test on single cable) |
3500.0 |
|
| 15.2.1.c2 (c) (Optical density of smoke) |
3500.0 |
|
| 15.2.1.c2 (e) (Smoke density rating) |
3500.0 |
|
| 15.2.1.c2 (d) (Halogen acid gas evaluation) |
3500.0 |
|
| 15.1 (Type Test - Three core Non-Mining) |
24000.0 |
|
| 15.1 (Type Test - Three and Half or four core Non-Mining) |
26000.0 |
|
| 15.2 (Acceptance tests - Single core Non-Mining) |
11500.0 |
|
| 15.2 (Acceptance tests - Two core Non-Mining) |
13500.0 |
|
| 15.2 (Acceptance tests(Two core FRLS Cable )) |
16499.0 |
|
| 15.2 (Acceptance tests - Three core Non-Mining) |
15500.0 |
|
| 15.2 (Acceptance tests(Three and Half or four core FRLS Cable)) |
26500.0 |
|
| 15.1 (Type Test(Three core FRLS Cable)) |
45000.0 |
|
| 15.1 (Type Test(Three and Half or four core FRLS Cable)) |
50000.0 |
|
|
| 567 |
IS 6006 (2014) - Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision) |
Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3 (Elongation) |
1000.0 |
|
| 7.3 (0.2% Proof Load) |
1000.0 |
|
| 7.3 (Breaking Strenth) |
3000.0 |
|
| 5.3 (Nominal Mass) |
1500.0 |
|
| 5.3 (Nominal Diameter ) |
1000.0 |
|
| 7.3 (3- Ply 3mm strand: Elongation) |
1000.0 |
|
| 7.2 (3- Ply 3mm strand: 0.2% Proof Load) |
1000.0 |
|
| 7.1 (3- Ply 3mm strand: Breaking Load, kN) |
3000.0 |
|
| 5.1 (Nominal Mass 3- Ply 3mm strand) |
1000.0 |
|
| 5.1 (Nominal Area 3- Ply 3mm strand) |
500.0 |
|
| 5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire) |
500.0 |
|
| 4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire) |
1000.0 |
|
| 3.1.2 (Phosphorus, % by mass) |
750.0 |
|
| 3.1.2 (Sulphur, % by mass.) |
750.0 |
|
| 7.3 (3- Ply 3mm strand: Elongation) |
1000.0 |
|
| 7.2 (3- Ply 3mm strand: 0.2% Proof Load) |
1000.0 |
|
| 7.1 (3- Ply 3mm strand: Breaking Load, kN) |
3000.0 |
|
| 5.1 (Nominal Mass 3- Ply 3mm strand) |
1000.0 |
|
| 5.1 (Nominal Area 3- Ply 3mm strand) |
500.0 |
|
| 5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire) |
500.0 |
|
| 4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire) |
1000.0 |
|
| 3.1.2 (Phosphorus, % by mass) |
750.0 |
|
| 3.1.2 (Sulphur, % by mass.) |
750.0 |
|
| 3.1.2 (Carbon, % by mass.) |
625.0 |
|
| 3.1.2 (Silicon, % by mass) |
625.0 |
|
| 3.1.2 (Manganese, % by mass) |
625.0 |
|
| 3.1.2 (Chromium, % by mass) |
625.0 |
|
| 6.3 (Modulus of Elasticity, kN/sq.mm) |
- |
|
|
| 568 |
IS 6685 (2009) - Life jackets - Specification (First Revision) |
Life jackets - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17.2 (Shoulder Strength Test) |
1000.0 |
|
| 16 (Strength of Neck Opening&Fastening Device) |
1000.0 |
|
|
| 569 |
IS 14181 : Part 1 (2002) - Synthetic (Plastic) slide fasteners - Special purpose: Part 1 specification, selection and ordering guideline of the product (First Revision) |
Synthetic (Plastic) slide fasteners - Special purpose: Part 1 specification, selection and ordering guideline of the product (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.3(ii) (Resistance to Heat under Load) |
1000.0 |
|
| 10.3(ii) (Resistance to Abrasion under Load) |
1000.0 |
|
| 10.3(i) (Reciprocating Movement of Slider under Load) |
1000.0 |
|
| 10.2(viii) (Security of Slider Lock Holding) |
1000.0 |
|
| 10.2(vii) (Security Attachment of Puller to Slider) |
1000.0 |
|
| 10.2(vi) (Security Attachment of Retainer to Lateral Load) |
1000.0 |
|
| 10.2(v) (Security Attachment of Retainer to Longitudinal Load) |
1000.0 |
|
| 10.2(iv) (Security Attachment of Bottom stop) |
1000.0 |
|
| 10.2(ii) (Security Attachment of Top stop) |
1000.0 |
|
| 10.2(ii) (Foldover Security of Lateral chain) |
1000.0 |
|
| 10.2(i) (Security of Interlocking of textile chain to lateral load) |
1000.0 |
|
| 8.2 (Length of Slide Fastener) |
1000.0 |
|
| 8.1(vii) (Diameter of Monofilament) |
1000.0 |
|
| 8.1(vi) (Puller Length) |
1000.0 |
|
| 8.1(v) (Tape Extension) |
1000.0 |
|
| 8.1(iv) (Tape Width) |
1000.0 |
|
| 8.1(iii) (Lace Width) |
1000.0 |
|
| 8.1(ii) (Textile Chain Thickness) |
1000.0 |
|
| 8.1(i) (Textile Chain Width) |
1000.0 |
|
| 5 (Visual Inspection) |
1000.0 |
|
|
| 570 |
IS 1322 (1993) - Bitumen Felts for Water Proofing and Damp-proofing |
Bitumen Felts for Water Proofing and Damp-proofing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (WATER ABSORPTION TEST, in percent) |
2000.0 |
|
| 8 (PRESSURE HEAD TEST,(a) AT 65 DEGREE C FOR 3 HRS AND (b) AT 5 DEGREE C FOR 3 HRS ) |
2000.0 |
|
| 8 (HEAT RESISTANCE TEST AT 68 DEGREE C FOR 3 HRS) |
2000.0 |
|
| 8 (STORAGE STICKING TEST at 55(+/-)2 deg C for 18 hrs) |
2000.0 |
|
| 8 (PLIABILITY TEST (a) Unrolling (b) After Conditioning for 3 hrs at 5 deg C, (i) Warpway, (ii) Weftway) |
2000.0 |
|
| 8 (Breaking Strength test, Kg) |
2000.0 |
|
| 5.4 (BITUMEN FELT IN Kg/10 sq.m) |
1000.0 |
|
| 7.2 (BITUMEN FELT IN Kg/10 sq.m) |
2000.0 |
|
| 4.3.3 (BITUMEN FELT IN Kg) |
1000.0 |
|
| 4.2.2 (BITUMEN FELT IN Kg) |
1000.0 |
|
|
