NTH - Management Information System

National Test House (ER), Alipore

Kolkata, Kolkata, West Bengal, 700027

- ssingh1@nth.gov.in

Scope List

Reset

180 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

IS 7739 : Part 5 (1976) - Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7739 (Microstructure)	3000.0

IS 7666 (1988) - Ultrasonic examination of ferritic castings of carbon and low alloy steel - Recommedned procedure (First Revision)

Ultrasonic examination of ferritic castings of carbon and low alloy steel - Recommedned procedure (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7666 (Ultrasonic examination)	2000.0

IS 7291 (1981) - Specification for high speed tool steels (First Revision)

Specification for high speed tool steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Dimension)	500.0
11 (Grain Size)	3000.0
10 (Micro Structure)	3000.0
9 (De-Carburization)	2000.0
8 (Macro test)	1000.0
12.2.1 (Straightness)	500.0
7.1 (Hardness)	1000.0
5 (Vanadium)	500.0
5 (Cobalt)	500.0
5 (Molybdenum)	500.0
5 (Chromium)	500.0
5 (Tungsten)	500.0
5 (Phosphorus)	500.0
5 (Sulphur)	500.0
5 (Manganese)	500.0
5 (Silicon)	500.0
5 (Carbon)	500.0

IS 14246 (2013 (RA 2018)) - CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND COILS

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND COILS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Total coated thickness (As in received condition), mm)	1000.0
4.2 (Mass of Zinc Coating)	2000.0
4.3 (Paint Coating Thickness)	2000.0
4 (% Elongation)	1000.0
4 (Yield Stress, MPa)	1000.0
4 (Tensile Strength, MPa)	1000.0
4 (Chemical Analysis (As per IS 513 (Part-1):2016 including Aluminium and Silicon))	3000.0

IS 101 ( Part 3/Set 2 ) (:1989 (RA 2019)) - METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHESAND RELATED PRODUCTS (PART 3: TESTS ON PAINT FILM FORMATION) (Section 2: Film Thickness)

METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHESAND RELATED PRODUCTS (PART 3: TESTS ON PAINT FILM FORMATION) (Section 2: Film Thickness)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Measurement of dry film thickness on magnetic metallic substrate by magnetic flux principle)	2000.0

ND Custom 9 (2023) - Training on Manual Metal Arc welding/ Gas Metal arc Welding

Training on Manual Metal Arc welding/ Gas Metal arc Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (One Day Training Programme on MMAW/GMAW)	1000.0
2 (Two Days Training Programme on MMAW/GMAW)	1000.0
3 (Three Days Training Programme on MMAW/GMAW)	3000.0
4 (Four Days Training Programme on MMAW/GMAW)	4000.0
5 (Five Days Training Programme on MMAW/GMAW)	5000.0

ND Custom 8 (2023) - Load test for steel roller Assembly

Load test for steel roller Assembly

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Compressive Load Test)	10000.0

ND Custom 7 (2023) - Sample of B-150 type OHE traction mast (Galvanized fabricated structure)

Sample of B-150 type OHE traction mast (Galvanized fabricated structure)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Mass of Zinc Coating as per IS 6745)	2000.0
2 (Zn Coating Thickness as per IS:3203 (1982))	2000.0

IS 6419 (1996) - Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14.3.3 (All weld Impact test)	3000.0
14.3.2 (All weld Tensile test)	3000.0
14.3.1 (Preparation of Weld assembly)	4000.0
14.2 (Radiography Test)	1000.0
10.2.3 (Helix)	500.0
10.2.2 (Cast)	500.0
10.2.1 (Temper)	1000.0
10.1 (Finish)	500.0
8.3 (Dimension of Coils)	500.0
8.2 (Dimension of Rims)	500.0
8.1 (Dimension of Spools)	500.0
14.1 (Copper)	500.0
14.1 (Vanadium)	500.0
14.1 (Molybdenum)	500.0
14.1 (Chromium)	500.0
14.1 (Nickel)	500.0
14.1 (Phosphorus)	500.0
14.1 (Sulphur)	500.0
14.1 (Manganese)	500.0
14.1 (Silicon)	500.0
14.1 (Carbon)	500.0
10.2.1 (Tensile Strength of Filler Metal Wire as per IS 1608)	3000.0
5 (Diameter of Wire)	500.0
6 (Reels of Wire)	500.0
7 (Reeling Conditions)	500.0
NA (Physical Test)	15000.0
14.1 (Mo+Ni+Cr)	500.0

IS 6416:2022 - Methods for Measuring Case Depth of Steel

Methods for Measuring Case Depth of Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Case Depth of Steel by Macrostructure Method)	3000.0
8 (Case Depth of Steel by Microstructure Method)	3000.0

IS 6396:2023 (2023) - Steels - Determination of the Depth of Decarburization

Steels - Determination of the Depth of Decarburization

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Measuring decarburized depth of steel)	2000.0

IS 6394 (2006) - Ultrasonic testing of seamless metallic tubular products by contact and immersion methods - Code of practice (Second Revision)

Ultrasonic testing of seamless metallic tubular products by contact and immersion methods - Code of practice (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 6394 (Ultrasonic examination)	2000.0

IS 6012 (1992) - Measurement of coating thickness by eddy current method (First Revision)

Measurement of coating thickness by eddy current method (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 6012 (Coating thickness)	2000.0

IS 5523 (1983) - Methods of testing anodic coatings on aluminium and its alloys (First Revision)

Methods of testing anodic coatings on aluminium and its alloys (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 5523 (Coating thickness)	2000.0

IS 5206 (1983) - Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.3 (Fillet weld test)	3000.0
9.2 (Elongation)	1000.0
9.2 (Tensile Strength)	2000.0
9.3 (preparation of Fillet weld assembly)	3000.0
9.2 (preparation of Butt Weld assembly)	4000.0
6.3 (Flux Covering)	500.0
6.2 (Bare Length-Arc stricking end)	500.0
6.1 (Bare Length-Contact End)	500.0
5.3 (Length of Electrodes)	500.0
5.1 (Diameter of core wire)	500.0

AMS 2630B (1995) - AEROSPACE MATERIAL SPECIFICATION

AEROSPACE MATERIAL SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Ultrasonic Testing)	2000.0

ND Custom 6 (2023) - Aluminium and Aluminium Alloy Plates

Aluminium and Aluminium Alloy Plates

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tensile and Bend Test)	4500.0

BS EN12385-1:2002 (2002) - Steel Wire ropes-Safety

Steel Wire ropes-Safety

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.4.1 (Breaking Force)	2000.0
A (Elongation as per customer request)	1000.0

ND Custom 5 (2023) - Load Testing of Winch

Load Testing of Winch

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Load Testing of Single Drum Winch as per customer request)	5000.0
2.0 (Load Testing of Single Drum Winch as per customer request)	5000.0

ND Custom 4 (2023) - Load Test of Lifting Tackle

Load Test of Lifting Tackle

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Load Test)	3000.0
A (Safe Working Load)	10000.0

IS 3848:1981 - Method for end quench test for hardenability of steel (First Revision)

Method for end quench test for hardenability of steel (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardenability Test)	8000.0

IS 3832 (2005) - Hand - Operated chain pulley block - Specification (Third Revision)

Hand - Operated chain pulley block - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A (Load Test of Chain Pulley as per Customer Request)	3000.0

IS 3703 (2004) - Recommended practice for magnetic particle flaw detection (Second Revision)

Recommended practice for magnetic particle flaw detection (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3703 (Magnetic Particle Testing)	1000.0

IS 3664:1981 - Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision)

Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ultrasonic Pulse Echo Testing by Contact Method)	1000.0

IS 3658 (1999) - Code of practice for liquid penetrant flaw detection (Second Revision)

Code of practice for liquid penetrant flaw detection (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A (Dye Penetrant Testing (At Three Location))	3000.0
B (Dye Penetrant Test)	1000.0

IS 3203 (1982) - Methods of testing local thickness of electroplated coatings (First Revision)

Methods of testing local thickness of electroplated coatings (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3203 (Coating thickness)	3000.0
IS 3203 (Coating thickness)	2000.0

IS 2831 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Dimensions)	1000.0
10.1.b (Sulphur print)	3500.0
10.1.a (Macro test)	1000.0
6 (Phosphorus)	500.0
6 (Sulphur)	500.0
6 (Manganese)	500.0
6 (Silicon)	500.0
6 (Carbon)	500.0

IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Dimensions)	1000.0
10.3 (Camber)	500.0
10.2 (Bend)	500.0
10.1(b) (Sulphur print test)	3500.0
10.1(a) (Macro Examination)	1000.0
6 (Phosphorus)	500.0
6 (Sulphur)	500.0
6 (Manganese)	500.0
6 (Copper)	500.0
6 (Carbon)	500.0

IS 2762 (2009) - Wire rope slings and sling legs - Specification (Second Revision)

Wire rope slings and sling legs - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.3 (Proof Load- 1 to 5 ton)	3000.0
9.3 (Proof Load- 6 to 9 ton)	6000.0
9.3 (Proof Load- 10 to 30 ton)	8000.0
9.3 (Proof Load- 31 to 99 ton)	10000.0
9.3 (Proof Load- 100 to 130 ton)	20000.0

IS 4853 (1982) - Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)

Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 4853 (Radiography)	2000.0

First
Prev
2
3
4
5
Next
Last