| 121 |
ND Custom 3 (2022) - Stainless Steel Wire 420 Grade |
Stainless Steel Wire 420 Grade |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Tensile Strength) |
3000.0 |
|
| 2 (Carbon) |
500.0 |
|
| 2 (Manganese) |
500.0 |
|
| 2 (Silicon) |
500.0 |
|
| 2 (Phosphorus) |
500.0 |
|
| 2 (Sulphur) |
500.0 |
|
| 2 (Chromium) |
500.0 |
|
| 2 (Nickel) |
500.0 |
|
|
| 122 |
ASME Sec IX (2019) - ASME Boiler and Pressure Vessel code-Performance Test |
ASME Boiler and Pressure Vessel code-Performance Test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| QW-302.1 (Bend Test) |
2000.0 |
|
| QW-302.2 (Radiographic Examination) |
1000.0 |
|
| QW-184 (Macro Examination) |
1000.0 |
|
| QW-302.1 (Tensile Strength) |
6000.0 |
|
|
| 123 |
ASM Vol.11 (2002) - Failure Analysis and Prevention |
Failure Analysis and Prevention |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASM (Failure investigation of metallic components and suggestions to avoid re occurrence of the failure) |
50000.0 |
|
| ASM (Metalographic examination-Failure investigation (Minimum)) |
25000.0 |
|
|
| 124 |
ND Custom 2 (2022) - Load Test of Saddle for Coil Transportation |
Load Test of Saddle for Coil Transportation |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Compressive Load Test at 30 Ton) |
5000.0 |
|
|
| 125 |
ND Custom 1 (2022) - Load Test of Speed Retarder/Breaker (Rubberised) |
Load Test of Speed Retarder/Breaker (Rubberised) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Load Test) |
10000.0 |
|
|
| 126 |
IRS:M-46 (2020) - INDIAN RAILWAYS STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACCEPTANCE CRITERIA OF FILLER WIRES FOR MIG/MAG WELDING (WITH AND WITHOUT GAS SHIELDING) |
INDIAN RAILWAYS STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACCEPTANCE CRITERIA OF FILLER WIRES FOR MIG/MAG WELDING (WITH AND WITHOUT GAS SHIELDING) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Size of Wire : Diameter) |
500.0 |
|
| 3.2 (Tensile Strength of Wire) |
3000.0 |
|
| 6.2.5 (Carbon) |
500.0 |
|
| 6.2.5 (Manganese) |
500.0 |
|
| 6.2.5 (Silicon) |
500.0 |
|
| 6.2.5 (Phosphorus) |
500.0 |
|
| 6.2.5 (Molybdenum) |
500.0 |
|
| 6.2.5 (Nickel) |
500.0 |
|
| 6.2.5 (Copper) |
500.0 |
|
| 6.2.5 (Chromium) |
500.0 |
|
| 6.2.5 (Vanadium) |
500.0 |
|
| 6.2.5 (Sulphur) |
500.0 |
|
|
| 127 |
ASM Hand Book Vol 9 (1992) - Metallography and Microstructures |
Metallography and Microstructures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASM Vol. 9 (Microstructure Analysis) |
3000.0 |
|
| ASM Vol. 9 (Examination of Macrostructure) |
2000.0 |
|
| ASM Vol. 9 (Grain Size) |
3000.0 |
|
|
| 128 |
ISO 10675-1 (2016) - Non-destructive Testing of Welds-Acceptance levels for radiographic testing- Part 1: Steel, nickel, titanium and their alloys |
Non-destructive Testing of Welds-Acceptance levels for radiographic testing- Part 1: Steel, nickel, titanium and their alloys |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Radiographic Testing of Butt Welds) |
3000.0 |
|
|
| 129 |
ASME Sec V, SE 797 (2019) - Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.0 (Thickness Measurement by Ultrasonic Pulse-Echo Contact Method) |
2000.0 |
|
|
| 130 |
IS 13871 (2021) - Powder Coating |
Powder Coating |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Dimension) |
500.0 |
|
| 9.1 (Measurement of Thickness on ferrous base: Dry film thickness) |
2000.0 |
|
| 9.1 (Measurement of Thickness on non ferrous base: Dry film Thickness) |
2000.0 |
|
|
| 131 |
IS 1868 (1996 Reaffirmed In : 2021) - Anodic coatings on aluminium and its alloys - Specification (Third Revision) |
Anodic coatings on aluminium and its alloys - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Microsection method) (Measurement of Thickness (Microsection method)) |
2000.0 |
|
|
| 132 |
IS 1599 (2023) - Metallic Materials - Bend Test |
Metallic Materials - Bend Test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 1599 (Bend test) |
1500.0 |
|
| IS 1599 (Metallic Materials - Bend Test) |
1500.0 |
|
|
| 133 |
ASM Vol.11 (2002) - Metallographic examination-Failure investigation ( minimum) |
Metallographic examination-Failure investigation ( minimum) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASM (Failure Analysis) |
25000.0 |
|
|
| 134 |
IS 15435 (2004) - Thickness gauging on metal products by ultrasonic method per sq. meter of surface area or fraction there of - 10 readings |
Thickness gauging on metal products by ultrasonic method per sq. meter of surface area or fraction there of - 10 readings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 15435 (Thickness measurement) |
1000.0 |
|
|
| 135 |
IBR 1950 (2023) - Qualified Boiler Welder's Certificate |
Qualified Boiler Welder's Certificate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Chapter XIII (Certification of welder per position of welding on Plate (SMAW/FCAW) (Plate and Electrodes not supplied by NTH)) |
3000.0 |
|
| Chapter XIII (Certification of welder on Pipe & Branch Pipe by TIG/GTAW) |
9000.0 |
|
| Chapter XIII (Certification of welder per position of welding on Pipe/Tube by MMAW) |
4500.0 |
|
| Chapter XIII (Certification of welder per position of welding on Pipe by TIG/GTAW) |
4500.0 |
|
| Chapter XIII (Certification of welder per position of welding on Tube by TIG/GTAW) |
4500.0 |
|
|
| 136 |
ASME ASME (2021) - Performance test ( Plate & electrodes not supplied by NTH) |
Performance test ( Plate & electrodes not supplied by NTH) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASME (Welding procedure qualification) |
11000.0 |
|
| ASME (Welding procedure qualification) |
7000.0 |
|
| ASME (Welder qualification) |
5000.0 |
|
|
| 137 |
ASME ASME Section IX (2021) - Preparation of welding procedure specification (WPS) as per ASME Section IX |
Preparation of welding procedure specification (WPS) as per ASME Section IX |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASME Section IX (Welding procedure Specification) |
10000.0 |
|
|
| 138 |
ASME Section IX (2019) - 2019 Boiler and Pressure Vessel Code |
2019 Boiler and Pressure Vessel Code |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| QW 191 (Radiography Test -Pipe) |
3200.0 |
|
| QW 191 (Radiography Test -Plate) |
1200.0 |
|
|
| 139 |
IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose —Specification |
Steel Wire Ropes for General Engineering Purpose —Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Minimum Breaking Force) |
10000.0 |
|
| 5 (Minimum Breaking Force) |
10000.0 |
|
| 5 (Minimum Breaking Force.) |
8000.0 |
|
| 4 (Size (Nominal diameter in mm)) |
500.0 |
|
|
| 140 |
RDSO C-9509 (Rev. 2) (2007) - Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Draw Hook Assembly used on Railway Coaches |
Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Draw Hook Assembly used on Railway Coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.3.2 (Proof Load) |
7500.0 |
|
| 6.3.1 (Destruction Test) |
7500.0 |
|
|
| 141 |
RDSO Specification No. MP-0.41.00.01 (Rev. 01) (2003) - Schedule of Technical Requirements for Transition Screw Couplings for Centre Buffer Coupler |
Schedule of Technical Requirements for Transition Screw Couplings for Centre Buffer Coupler |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3.3 (Destruction Test) |
7500.0 |
|
| 7.3.2 (Impact Test) |
7500.0 |
|
|
| 142 |
DGMS S&T/Tech.Cir.(Approval)No.2 dated Dhanbad 03.06.2010 (2010) - Standard Components and Properties of Rigid Steel Props, Chocks& Cogs to be used in Mines |
Standard Components and Properties of Rigid Steel Props, Chocks& Cogs to be used in Mines |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Welding and Weld Test) |
11000.0 |
|
| 5 (Other Properties and parameters) |
12000.0 |
|
| 3.5 (Overload Test) |
1000.0 |
|
| 3.4 (Eccentric Load Test) |
1000.0 |
|
| 3.3 (Axial Load Test) |
1000.0 |
|
| 2 (Chemical Composition) |
10000.0 |
|
| 1 (UTS, Y.S., Elongation) |
3000.0 |
|
|
| 143 |
RDSO C-9505 (Revised) (2001) - Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Screw Couplings used on Railway Coaches |
Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Screw Couplings used on Railway Coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3.2 (Destruction Test) |
7500.0 |
|
| 7.3.1 (Impact Test) |
7500.0 |
|
|
| 144 |
IS 1757 (PART 1): 2020 - Metallic Materials Charpy Pendulum Impact Test Part 1 Test Method |
Metallic Materials Charpy Pendulum Impact Test Part 1 Test Method |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Charpy Impact Test) |
3000.0 |
|
| 2 (Charpy Impact Test) |
5000.0 |
|
|
| 145 |
IS/ISO 2415 (2004) - Forged shackles for general lifting purposes - Dee shackles and bow shackles |
Forged shackles for general lifting purposes - Dee shackles and bow shackles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.10 (Working Load Limit (1 to 5 Ton)) |
3000.0 |
|
| 3.10 (Working Load Limit (6 to 9 Ton)) |
6000.0 |
|
| 3.10 (Working Load Limit (10 to 30 Ton)) |
8000.0 |
|
| 3.10 (Working Load Limit (31 to 99 Ton)) |
10000.0 |
|
|
| 146 |
IS 7318 : Part 1 (1974) - Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel |
Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| NA (Radiography examination) |
1000.0 |
|
| 5.2.2 (Macro-examination) |
1000.0 |
|
| 5.1 (Visual examination) |
1000.0 |
|
| 5.2.5 (Fillet Weld Fracture Test) |
1000.0 |
|
| 5.2.3 (Root Bend Test) |
1000.0 |
|
| 5.2.4 (Side Bend Test) |
1000.0 |
|
|
| 147 |
IS 7310 : Part 1 (1974) - Approval test for welders to approve welding procedures (plate & electrodes not supplied by NTH) |
Approval test for welders to approve welding procedures (plate & electrodes not supplied by NTH) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.2.1a) (Penetrant Testing) |
1000.0 |
|
| 8.3.1 (Macro-examination Test) |
1000.0 |
|
| 8.3.1 (Fillet weld fracture test) |
3000.0 |
|
|
| 148 |
IS 7310 : Part 1 (2019) - Qualification Testing of Welders-Fusion Welding Part 1 Steels (First Revision) |
Qualification Testing of Welders-Fusion Welding Part 1 Steels (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.2.1a) (Magnetic Particle Testing) |
1000.0 |
|
| 6.4 (Ultrasonic Testing) |
1000.0 |
|
| 6.4 (Radiographic Testing on Plate) |
1000.0 |
|
| 6.4 (Visual Testing) |
1000.0 |
|
| 6.4 (Macroscopic Examination) |
1000.0 |
|
| 6.4 (Bend Test) |
1000.0 |
|
| 6.4 (Fracture Test) |
3000.0 |
|
| 6.4 (Notched Tensile Test) |
3000.0 |
|
| 6.4 (Radiographic Testing on Pipe) |
3000.0 |
|
|
| 149 |
IS 9550 (2001) - Bright steel bars - Specification (First Revision) |
Bright steel bars - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.1 (Surface Roughness) |
2000.0 |
|
| 11.1 (MPI/LPT) |
1000.0 |
|
| 11.1 (Micro Structure) |
3000.0 |
|
| 11.1 (Grain Size) |
3000.0 |
|
| 11.1 (Inclusion rating) |
4000.0 |
|
| 11.1 (Hardenability) |
8000.0 |
|
| 9.1 (De-Carburization) |
2000.0 |
|
| 8.4 (Out of Shape) |
500.0 |
|
| 8.3 (Straightness) |
500.0 |
|
| 8.2 (Length) |
500.0 |
|
| 8.1 (Diameter) |
500.0 |
|
| 6 (Carbon) |
500.0 |
|
| 6 (Silicon) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 6 (Phosphorus) |
500.0 |
|
| 6 (Sulphur) |
500.0 |
|
| 7 (Tensile Test) |
1000.0 |
|
| 7 (Yield Stress ---- IS 1608 (Part 1):2022) |
1000.0 |
|
| 7 (% Elongation) |
1000.0 |
|
| 7 (Impact Test --- Charpy/Izod as per IS 1757 -Part1/ IS 1598) |
3000.0 |
|
| 7 (Hardness - Rockwell/Brinell/ Vickers as per IS 1586 Part-1/ IS1500 Part-1/ IS 1501 Part-1) |
2000.0 |
|
|
| 150 |
IS 8791 (1978) - Code of practice for ultrasonic flaw detection of ferritic steel forgings |
Code of practice for ultrasonic flaw detection of ferritic steel forgings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 8791 (Ultrasonic examination) |
2000.0 |
|
|
