NTH - Management Information System

Search by Standard No.

Reset

4067 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2611

National Test House (ER), Kolkata

IS 5352 : Part 1 (1999) - Textile – Glass and glass-polyester fibre woven tapes Part 1 Specification (third revision)

Textile – Glass and glass-polyester fibre woven tapes Part 1 Specification (third revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Alkali percent as Sodium Oxide)	2000.0
5.1 (Identification of Yarn)	2000.0
5.2 (Weave)	500.0
5.3 (Locking Thread)	500.0
5.4 (Centre Marking)	500.0
5.5 (Identification of Types of Tapes)	500.0
6.1 (Thickness)	1000.0
6.2 (Width)	500.0
6.3 (Length)	500.0
6.4 (Tensile Strength)	2000.0
6.5 (Effect of heating in air)	3000.0
6.5 (Glass Content)	2000.0

2612

National Test House (WR), Mumbai

IS 2046-IS 2046 (1995) - Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2613

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169) 10 (2019) - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (30 kN to 50 kN).

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (30 kN to 50 kN).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Force (30 kN to 50 kN))	10000.0

2614

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/004 (2022) - Customer Specification- Dimension Measurement of Weight Per Litre Cup

Customer Specification- Dimension Measurement of Weight Per Litre Cup

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension Measurement of Weight Per Litre Cup)	2000.0
2 (Dimension Measurement of Weight Per Litre Cup)	4000.0

2615

National Test House (ER), Kolkata

DOLOMITE - Custom-DOlOMITE

Custom-DOlOMITE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Calcium, Percent by mass)	2000.0
2 (Magnesium, percent by mass)	2000.0

2616

National Test House (WR), Mumbai

EN / BS/ IS - Method of test of Rock

Method of test of Rock

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 of EN 13383 (Part 2) (Determination of Particle Density (EN 13383-2:2013), Mg/m^3)	1500.0
8 of EN 13383 (Part 2) (Determination of Water Absorption (EN 13383-2:2013), %)	1500.0
8 of EN 1926 :2006 (Compressive strength (EN 1926 : 2006), MPa)	5000.0
8 of EN 1926 :2006 (Compressive strength normal to plane of anisotropy (EN 1926 : 2006), MPa)	5000.0
8 of EN 1926 :2006 (Compressive strength Parallel to plane of anisotropy (EN 1926 : 2006), MPa)	5000.0
5 of BS EN 1097 - 2 : 2010 (Determination of resistance to fragmentation by Los Angeles Test Method (BS EN 1097-2 : 2010), %)	2000.0
9 of BS EN 1367-2 : 2009 (Magnesium Sulphate Test (BS EN 1367 - 2 : 2009), MS Value in %)	4000.0
3 (Average Loose Bulk Density,)	500.0
3 (Average Compacted Bulk Density)	500.0
2 (Water Absorption)	1000.0
2 (Specific Gravity)	1000.0
6 (Soundness [Magnesium Sulphate Solution])	4000.0
5.3 (Aggregate Abrasion Value (Los Angeles Abrasion))	2000.0
4 (Compressive Strength of Rock Core)	5000.0

2617

National Test House (WR), Mumbai

JIS K 6911 and Customer requirements - Sheet Molding Compound

Sheet Molding Compound

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Flexural Strength (JIS K 6911:1995))	4000.0
- (Water absorption test (JIS K 6911:1995))	2000.0
- (Appearance after boiling (JIS K 6911:1995))	2000.0
- (Specific Gravity (IS 8543(Part 1/Sec 2):1979))	1000.0
- (Withstand voltage flatwise (JIS K 6911:1995))	2000.0
- (Insulation resistance test at normal state and after boiling (JIS K 6911:1995))	3000.0

2618

National Test House (NR), Ghaziabad

NTH/NR/RPPT/PU-Tile (2022) - Polyurethane Tactile Tile

Polyurethane Tactile Tile

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tensile Strength, MPa)	2000.0
2 (Elongation, %)	2000.0
3 (Material Identification)	2000.0
4 (Dimensions)	1000.0

2619

National Test House (ER), Kolkata

SCHEDULE OF REQUIREMENTS(SOR)/SCHOOL BAG/2024 (2024) - SCHEDULE OF REQUIREMENTS(SOR)/SCHOOL BAG/2024

SCHEDULE OF REQUIREMENTS(SOR)/SCHOOL BAG/2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Colour of the Bag)	100.0
1.2 (Colour of the Front Pocket)	100.0
1.3 (Colour of the Shoulder Strip)	100.0
1.4 (Colour of the Adjustable Belt)	100.0
1.5 (Colour of the Beadings)	100.0
1.6 (Colour of the Shoulder Adjustable Buckle)	100.0
1.7 (Colour of the Water Bottle Pocket)	100.0
1.8 (Colour of the Zip)	100.0
1.9 (Colour of the Runner)	100.0
1.10 (Colour of the Top Handle)	100.0
2.1 (Length of Main Compartment)	100.0
2.1 (Breadth of Main Compartment)	100.0
2.1 (Depth of Main Compartment)	100.0
2.2 (Length of Front Pocket)	100.0
2.2 (Breadth of Front Pocket)	100.0
2.2 (Depth of Front Pocket)	100.0
2.3 (Length Of Shoulder Strap)	100.0
2.3 (Breadth Of Shoulder Strap)	100.0
2.3 (Material Specification of Shoulder Strap)	500.0
2.4 (Length of Water Bottle Pocket)	100.0
2.4 (Breadth of Water Bottle Pocket)	100.0
2.4 (Material Specification of Water Bottle Pocket)	500.0
3.1 (Length of Zip(Main Compartment))	100.0
3.2 (Zip No.(Front Pocket))	100.0
4.0 (Length of Runner Handle)	100.0
4.0 (Width of Runner Handle)	100.0
5.0 (Length of Top Handle)	100.0
5.0 (Width of Top Handle)	100.0
6.0 (Length Of Adjustable Belt)	100.0
6.0 (Breadth Of Adjustable Belt)	100.0
6.0 (Thickness Of Adjustable Belt)	100.0
8.1 (Identifiction of Outer Layer)	500.0
8.1 (GSM of Outer Layer)	500.0
8.2 (Identification of Cushion Foam)	500.0
8.2 (Thickness of Cushion Foam)	100.0
8.3 (Identification of Zip)	500.0
8.4 (Identification of NET)	500.0
8.5 (Identification of Adjustable Belt)	500.0
8.5 (Weight of Adjustable Belt)	1000.0
8.6 (Identification of Shoulder Adjustable Buckle)	500.0
8.6 (Breaking Load of Shoulder Adjustable Buckle)	500.0
8.7 (Identification of Thread)	500.0
8.8 (Breaking Strength of Main Fabric Body(Warp))	1000.0
8.8 (Breaking Strength of Main Fabric Body(Weft))	1000.0
8.8 (Tear Strength of Main Fabric Body(Warp))	1000.0
8.8 (Tear Strength of Main Fabric Body(Weft))	1000.0
8.10 (Drop Test)	1000.0
8.11 (No. of Stitches per 25 mm)	100.0
8.12 (Lining Material)	500.0
8.13 (Snatch Test)	1000.0

2620

National Test House (ER), Kolkata

Custom/Steel Cord Conveyor Belt/2026 (2026) - Steel Cord Conveyor Belt For Hoisting and Conveying

Steel Cord Conveyor Belt For Hoisting and Conveying

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's request. (Pull-Out Force of the Cord)	3000.0
Firm's request. (Strip Resistance Between Cover Rubber & Core Rubber)	4000.0
Firm's request. (Tensile Strength of Cover Rubber)	2000.0
Firm's request. (Elongation of Cover Rubber)	1000.0
Firm's request. (Change in Tensile Strength of Cover After Ageing (at 70 deg.C for 168 hrs.))	3000.0
Firm's request. (Change in Elongation of Cover After Ageing (at 70 deg.C for 168 hrs.))	2000.0
Firm's request (Abrasion Loss)	3000.0
Firm's request (Hardness (Shore A))	1000.0
Firm's request (Tear Strength of Cover Rubber)	4000.0
Firm's request (Flame Test)	4000.0
Firm's request (Electrical Resistivity)	5000.0
Firm's request. (Cord-Pull Out Force After Thermic Treatment)	3000.0
Firm's request (Change in Tensile Strength of Cover After Ageing (at 70 deg.C for 72 hrs.))	3000.0
Firm's request (Change in Elongation of Cover After Ageing (at 70 deg.C for 72 hrs.))	2000.0

2621

National Test House (WR), Mumbai

IS 1554 : Part 1 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES

SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Type Tests)	75000.0
15.1 (Type Test)	40000.0
15 (Type tests (Non FRLS))	25000.0

2622

National Test House (ER), Kolkata

IS 12744 (2013 RA 2018) - Ready Mixed Paint, Air Drying, Red Oxide - Zinc Phosphate, Priming - Specification ( For Domestic and Decorative Applications)

Ready Mixed Paint, Air Drying, Red Oxide - Zinc Phosphate, Priming - Specification ( For Domestic and Decorative Applications)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Lead Restriction(Lead as Metallic Lead))	2000.0
5.3 Table 1(i) (Drying Time ,Hard Dry in hours)	500.0
5.3 Table 1(ii) (Consistency)	100.0
5.3 Table 1(iii) (Finish)	200.0
5.3 Table 1(iv) (colour in Natural Daylight)	1200.0
5.3 Table 1(v) (Wet opacity meter square per liter)	1200.0
5.3 Table 1(vi) (Pigment content, percent by mass)	2100.0
5.3 Table 1(vii) (Zinc phosphate ,percent by mass on pigment (annex C))	3500.0
5.3 Table 1(viii) (Red Oxide (as Fe2O3),percent by mass on pigment)	2500.0
5.3 Table 1(ix)a (Flexibility and adhesion a) Scratch hardness (Load 800 g))	2000.0
5.3 Table 1(ix) b (Flexibility and adhesion b) Bend test (with 6.25 mm dia mandrel in type 1 apparatus))	1200.0
5.3 Table 1(x) a (Resistance to humidity under conditions of condensation: a) Resistance to humidity (for 7 days))	2500.0
5.3 Table 1(x)b (Resistance to humidity under conditions of condensation: b) Resistance to salt spray to (for96 hours))	2500.0
5.3 Table 1(ix) (Flash point, Deg C)	2000.0
5.3 Table 1(xii) (Mass in kg/10 ltrs)	1500.0
5.3 Table 1(xiii) (Keeping properties (for 12 months ))	10000.0

2623

National Test House (WR), Mumbai

IS 2720 / 2386 (1983) - Method of Test of Soils (Blanketing Material / Earth / Fill Material)

Method of Test of Soils (Blanketing Material / Earth / Fill Material)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 8, Cl 5 & 6 (Determination of Water Content- Dry Density Relation using Heavy Compaction [IS 2720(Part 8)].)	5000.0
Part 16, Cl. 5.2 (Laboratory Determination of CBR [IS 2720 (Part 16)],)	6000.0
Part 4 (Grain Size Analysis [IS 2720 (Part 4)],)	5000.0
Part 4, cl. No. 5 (Coefficient of Uniformity from Grain size analysis, Cu)	500.0
Part 4, cl. No. 5 (Coefficient of curvature from grain size distribution, Cc)	500.0
Part 5, (Atterberg Limit (Liquid Limit, Plastic Limit and Plasticity index), IS 2720 (Part 5).)	3000.0
IS 2386 (Part 1), (Combined Flakiness Index and Elongation Index, [IS 2386 (Part 1)])	3000.0
IS 2386 (Part 5), (Soundness of aggregate [IS 2386 (Part 5)])	2000.0
- - (Classification of soil)	2000.0
4 (Aggregate Impact Value)	2000.0
2 (Water Absorption)	1000.0
- - (Total Sulphate Content)	1000.0
- - (Total Chloride Content)	1000.0
- - (Organic Matter)	1000.0
- - (Carbonate content)	1000.0

2624

National Test House (ER), Kolkata

NTH ER PAINT EXTERIOR PERFORMANCE (2022) - NTH ER PAINT EXTERIOR PERFORMANCE

NTH ER PAINT EXTERIOR PERFORMANCE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Water Vapor Permeability Test- ASTM D1653)	4500.0
2 (QUV test for 300 hours Fluorescent UV-Condensation Exposures of Paint ASTM D4587)	15000.0
3 (QUV test for 200 hours Fluorescent UV-Condensation Exposures of Paint ASTM D4587)	10000.0
4 (Tensile Strength- ASTM D638)	2000.0
5 (Elongation @ Break- ASTM D638)	1000.0
6 (Pull off Adhesion test (ASTM D 4541) on concrete Substrate)	2000.0
7 (QUV test for 500 hours Fluorescent UV-Condensation Exposures of Paint ASTM D4587)	25000.0

2625

National Test House (ER), Kolkata

IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY

WHITE CEMENT BASED POLYMERIC PUTTY

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (FORM &CONDITION)	100.0
4.2 (Composition)	100.0
4.3 (Consistency)	100.0
4.4 (Lead Restriction ( as metallic lead))	1000.0
4.5 Table 1(i) (Tensile adhesion strength (avg. of min 3 readings) @14 days, N/mm2,)	2500.0
4.5 Table 1(ii) (Water retentivity, percent)	1000.0
4.5 Table 1(iii) (Initial Setting time-Annex D in minutes)	200.0
4.5 Table 1(iii) (Final Setting time-Annex D in minutes)	200.0
4.5 Table 1(iv) (Polymer content (based on loss on ignition), percent by mass)	1000.0
4.5 Table 1(vi) (Cement content, percent Annex B of IS 5410)	1200.0
4.6 Optional requirement (Compressive strength, 28 days in N/mm2 (IS 4031 (Part 6)))	3000.0
4.5 Table 1(v) (Degree of whiteness, percent)	1200.0

2626

National Test House (WR), Mumbai

IRS-GE-1 (2016) - Specifications for Track ballast (IRS-GE-1)

Specifications for Track ballast (IRS-GE-1)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.2.1 (Aggregate abrasion Value (IS 2386(IV):1963))	2500.0
2.2.2 (Aggregate Impact Value (IS 2386(Part IV):1963))	2500.0
2.2.3 (Water absorption ( IS 2386 (III):1963))	1000.0
2.3 (Size and Gradation (as per annexure IV of IRS-GE-1,June 2016))	2000.0
1 (Flakiness index (as per IS 2386 (Part 1) : 1963), %)	2000.0
1 (Elongation index (as per IS 2386 (Part 1) : 1963), %)	2000.0

2627

National Test House (WR), Mumbai

GE: IRS -2 (Final) (2005) - SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS INCLUDING GUIDELINES FOR LAYING

SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS INCLUDING GUIDELINES FOR LAYING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (DETERMINATION OF WATER CONTENT-DRY DENSITY RELATION (IS 2720(8):1983) (Proctor test))	5000.0
4.1.C.1 (Test for Non Plastic fines(Particles of size less than 75 micron)(as per GE: IRS -2 (Final)))	1000.0
4.1.C.2 (Test for Plastic fines(GE: IRS -2 (Final)))	1000.0
4.1.d (Test for Particle size distribution(GE: IRS -2 (Final)))	5000.0
4.1.e.1 (Test for Uniformity Co-efficient (Cu) {GE: IRS -2 (Final)})	1500.0
4.1.e.2 (Test for Co-efficient of Curvature(CC) (GE: IRS -2 (Final)))	1500.0
- (Test for Aggregate Abrasion Value (Los Angeles) as per IS 2386 (Part 4): 1963)	1500.0
IS 2720 (Part 16) (California Bearing Ratio (in dry condition))	7000.0
IS 2720 (Part 16) (California Bearing Ratio (in soaked condition))	7000.0

2628

National Test House (ER), Kolkata

IS 3589 (2001) - Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Dimension (Diameter))	1000.0
9.1 (Tensile Strength)	1000.0
9.1 (Yield Strength)	1000.0
9.1 (Elongation)	1000.0
12.5 (Straightness)	1000.0
9.2 (Flattening test)	1000.0
11 (Weight)	1000.0
8.1 (Carbon)	500.0
8.1 (Sulphur)	500.0
8.1 (Phosphorus)	500.0
8.1 (Manganese)	1000.0
14 (Visual Inspection, Apperance and Workman ship)	1000.0
8.1 (Carbon Equivalent)	2000.0

2629

National Test House (ER), Kolkata

8183 - Bonded Mineral wool-Specification

Bonded Mineral wool-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.10.1 (Resistance to microorganisms)	3000.0

2630

National Test House (WR), Mumbai

IS 1161 (2014) - Steel tubes for structural purposes - Specification (Fifth Revision)

Steel tubes for structural purposes - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Coating thickness, micron)	2000.0
5 (Chemical Composition)	2500.0
11.3.2 (Flattening Test above 50 mm NB)	1000.0
11.3.1 (Cold Bend Test up to 50 mm NB)	1000.0
11.2 (Percentage Elongation, %)	1000.0
11.2 (Yield Strength, MPa)	1000.0
11.2 (Tensile Strength, MPa)	1000.0
6 (Dimension)	1000.0
6 (Mass per meter, kg/m)	1000.0
7 (Workmanship)	1000.0
0 (Adhesion Test)	1000.0
0 (Salt Spray Test)	60000.0
0 (Mass of Zinc Coating)	2000.0

2631

National Test House (ER), Kolkata

IS 3448 (2014) - Rice bran oil - Specification (Third Revision)

Rice bran oil - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.7 i (Moisture and insoluble impurities, percent by mass)	1000.0
5.7 ii (Colour in a 1 inch cell on the Lovibond scale, expressed as (Y + 5R))	1000.0
5.7 iii (Refractive index at 40ºC)	1000.0
5.7 iv (Specific gravity at 30º/30ºC)	1000.0
5.7 v (Saponification value)	1000.0
5.7 vi (Iodine value (Wijs))	1000.0
5.7 vii (Acid value,)	1000.0
5.7 viii (Unsaponifiable matter, percent by mass)	1000.0
5.1 (Description)	1000.0
5.2.1 (Clarity)	1000.0
5.3 (Test for presence of Argemone oil)	1000.0
5.3 (Test for presence of Castor oil)	1000.0
5.3 (Test for presence of Hydrocyanic acid)	1000.0
5.3 (Test for presence of MIneral oil)	1000.0
5.3 (Test for presence of Karanja oil)	1000.0
5.3 (Test for presence of kusum oil and other oils containing cyanogenic compounds)	1000.0
5.3 (Test for presence of neem oil)	1000.0

2632

National Test House (WR), Mumbai

IS 1269:Part 2 (1997) - Legal metrology - Material Measures of Length, Part 2: Steel Tape Measures

Legal metrology - Material Measures of Length, Part 2: Steel Tape Measures

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2633

National Test House (WR), Mumbai

DKD-R 6-1 (2014) - Calibration of Pressure Gauges.

Calibration of Pressure Gauges.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2634

National Test House (WR), Mumbai

IS 1501 (2002) - Method For Vickers Hardness Test for Metallic Materials

Method For Vickers Hardness Test for Metallic Materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1501 (Hardness)	1000.0

2635

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/003 Aluminium Composite Panels Custom Specification (2022) - Custom Specification - Aluminium Composite Panels

Custom Specification - Aluminium Composite Panels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Thickness of ACP)	1000.0
2 (Weights of ACP)	1000.0
3 (Density of ACP)	1000.0
4 (Density of Polyethylene Core)	1000.0
5 (Bond Integrity (Peeling Strength) of ACP)	3000.0
6 (Tensile Strength of ACP)	3000.0
7 (Yield Strength of ACP and Modulus of Elasticity)	1000.0
8 (% Elongation of ACP)	1000.0
9 (Flexure Strength Both Side of ACP)	4000.0
10 (Thickness)	1000.0
11 (Tensile Strength)	3000.0
12 (Yield Strength)	1000.0
13 (Percentage of Elongation)	1000.0
14 (Chemical Composition (Alloy of the cover Sheet) in % as per the relevant IS / ASTM /ISO or other test method specified.)	5000.0
15 (Gloss @ 60degree Angle.)	1200.0
16 (Impact Energy.)	1500.0
17 (Visual observation (Cross hatch))	1200.0
18 (Hardness)	1200.0
19 (Solvent Resistant (MEK))	1500.0
20 (Water Absorption and Chemical Resistance - 5% HCL Test with 24 Hours or 10% HCL Test with 1 hour)	1500.0
21 (Flexibility Test - Paint Finish and Test Properties)	1200.0
14 (Non-Destructive Coating Thickness measurement - Paint Finish and Test Properties)	1500.0

2636

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/001 FIREEXTBALL OR THROW TYPE - FIRE EXTINGUISHER BALL OR THROW TYPE

FIRE EXTINGUISHER BALL OR THROW TYPE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (General appearance (Visual Observation))	1000.0
2 (Thickness of the Shell.)	-
2 (Total Height)	-
2 (Outside Diameter)	1000.0
3 (Capacity of the Fire Extinguishing Agent.)	1000.0
4 (Net weight)	-
4 (Gross weight)	1000.0
5 (Compressive Strength)	3000.0
6 (Drop or Throwing Distance)	1000.0
7 (Performance Test (Visual Observation))	3000.0
7 (Activation Time)	1000.0
7 (Total Fire Extinguish Time)	1000.0
2 (Outer shell material.)	2000.0
3 (Physical property of Agent)	2000.0
8 (Percentage of Discharge)	1000.0
9 (Analysis of Heavy Metals (Toxic Elements) such as Lead (Pb), Cadmium (Cd), Mercury (Hg), Arsenic (As), Chromium (Cr) in %)	5000.0
10 (Mono Ammonium Phosphate (MAP) content in % as per the relavant IS specification or any other stanard test method specificed specified by the customer or any National or Interenational Standard method.)	2000.0

2637

National Test House (ER), Kolkata

IS 12866 (2021) - Plastic Translucent Sheets made from Thermo-Setting Polyester Resin Glassfibre Reinforced - Specification

Plastic Translucent Sheets made from Thermo-Setting Polyester Resin Glassfibre Reinforced - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.8 (Light Transmission, percent)	2000.0
6.6 (Load Deflection Test.)	8000.0
6.5 (Bolt Shear Test.)	2000.0
6.3 (Water Absorption, percent)	1000.0
6.2 (Glass Content, percent)	3000.0
6.1 (Mass per unit area)	1000.0
4.6 (Pitch of Corrugation, mm)	1000.0
4.5 (Depth of Corrugation, mm)	1000.0
4.2 (Minimum Thickness, mm)	1000.0
4.1 (Overall Width, mm)	1000.0
Firm's Request (Exposure to UV Light(24-hrs))	1200.0
Firm's request. (Density)	1000.0

2638

National Test House (ER), Kolkata

Customer Specification- High Voltage Test - Customer Specification- High Voltage Test

Customer Specification- High Voltage Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
AC High Voltage test (AC High Voltage test)	5000.0

2639

National Test House (WR), Mumbai

Customized specification for Khanjeri - Khanjeri

Khanjeri

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Plastic Body Fibre Pan 10 inches)	1000.0
- (Jingles and Keys(visual observations))	1000.0

2640

National Test House (WR), Mumbai

Customized specification for Bigul - Bigul

Bigul

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Brass body with steel polish)	5000.0
- (Weight of Bigul)	1000.0