NTH - Management Information System

Search by Standard No.

Reset

4067 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2581

National Test House (WR), Mumbai

266 (1993 (RA2020)) - Sulphuric Acid

Sulphuric Acid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 and 4.3 (i) (Total Acidity (as H2SO4))	1000.0
4.2 and 4.3 (ii) (Residue on Ignition)	500.0
4.2 and 4.3 (iii) (Iron (as Fe))	500.0
4.2 and 4.3 (iv) (Chlorides (as Cl))	500.0
4.2 and 4.3 (v) (Lead (as Pb))	1.0
4.2 and 4.3 (vi) (Arsenic (as As))	500.0
4.2 and 4.3 (vii) (Oxidizable Impurities (as SO2))	500.0
4.2 and 4.3 (viii) (Organic Matter)	500.0
4.2 and 4.3 (ix) (Nitrates (as NO2))	500.0
4.2 and 4.3 (x) (Ammonia (as NH3))	500.0
4.2 and 4.3 (xi) (Selenium (as Se))	500.0
4.2 and 4.3 (xii) (Manganese (as Mn))	500.0
4.2 and 4.3 (xiii) (Copper (as Cu))	500.0
4.2 and4.3 (xiv) (Zinc (as Zn))	500.0
4.2 and 4.3 (xv) (Nitrates, Nitrites, and Ammonia (as N))	500.0
4.1.3 (Preliminary Examination)	500.0
Specific Gravity (Specific Gravity)	500.0
TEST RESULTS AS PER ANNEXURE (TEST RESULTS AS PER ANNEXURE)	5000.0

2582

National Test House (ER), Kolkata

Customized IS:11673-1992 (1992) - Sodium Hypo Chlorite Specification

Sodium Hypo Chlorite Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Available Chlorine % by mass by Volume)	2000.0

2583

National Test House (SR), Chennai

Customer Specification - Lightning Impulse Voltage - Lightning Impulse Voltage Test on HV Bushings - Customer Specification

Lightning Impulse Voltage Test on HV Bushings - Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Lightning Impulse test Full wave - Customer Specification (Lightning Impulse test Full wave on HV Bushings - Customer Specification)	10500.0
Lightning Chopped Impulse test - Customer Specification (Lightning Chopped Impulse test on HV Bushings - Customer Specification)	13000.0
3 (Dielectric Test on Tap Changer - Lightining Impulse , Chopped Impulse and High Voltage Test)	122500.0
Lightning Impulse test (Lightning Impulse test Full wave)	15000.0

2584

National Test House (NR), Ghaziabad

IS 16205(Part24):2018 (2018) - Conduit Systems for Cable Management

Conduit Systems for Cable Management

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.0 (Table101) (Dimension)	2000.0
10.2 (Compression Test)	3000.0
10.3 (Impact Test)	4000.0

2585

National Test House (ER), Kolkata

IS 14246 (2024) - Continuously Pre-Painted Galvanized Steel Sheets and Strips

Continuously Pre-Painted Galvanized Steel Sheets and Strips

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Bend Test)	1000.0
9 (Mass of Sheet)	1000.0
8 (SALT SPRAY TEST (CORROSION RESISTANCE))	50000.0
4.2 (Mass of Zinc Coating)	2000.0
4.3 (Paint Coating Thickness)	2000.0
6.3 (Pencil Hardness Test)	1000.0
6.4 (Impact Resistance Test)	1000.0
6.5 (Cross Hatch Test)	1000.0
4 (Chemical Analysis as per Is 513 (Part-1):2016)	2500.0
4 (Tensile strength, MPa)	1000.0
4 (Yield Stress, MPa)	1000.0
4 (% Elongation)	1000.0
9 (Base Metal Thickness)	500.0
9 (Total Coated Thickness (as received condition), mm)	500.0

2586

National Test House (NR), Ghaziabad

JIS G 3448 - Light gauge stainless steel tubes for ordinary piping

Light gauge stainless steel tubes for ordinary piping

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Outside Diameter)	1000.0
6 (Thickness)	1000.0
3 (Chemical Composition)	5000.0
6.1 (Weight per Metre, kg)	1000.0
9.2 (Flattening Test)	1000.0
9.1 (Tensile strength test as per IS 1608 (Part 1):2022, N/mm2)	2000.0
9.1 (Elongation percent, % as per IS 1608(Part 1):2022)	1000.0

2587

National Test House (NR), Ghaziabad

IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 - Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables — Specification,Part 1 For Working Voltages up to and including 1 100 Volts ( Second Revision ).

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables — Specification,Part 1 For Working Voltages up to and including 1 100 Volts ( Second Revision ).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.15.1 (Type tests as per Cl.15.1)	26000.0
C) and f) of Cl.15.1 (Test for thickness of insulation and sheath and Insulation Resistance)	5000.0
Test1 (Type tests)	20000.0
Test2 (Type Tests)	40000.0
Test3 (Type Tests)	22000.0
Test4 (Type Tests)	42000.0
Test5 (Type Tests)	24000.0
10.1 (Core Identification)	2000.0
Cl.15.1(f) (Insulation Resistance at Ambient Temperature)	2000.0
Type Tests-4Core-FRLSH (Type Tests)	46000.0
Test (Tests)	15000.0
Tests (Tests)	17000.0
Test (Tests)	11500.0
Tests (Tests)	12500.0
Tests (Tests)	21500.0
Tests2 (Tests)	17500.0
Test (HighVoltage Test at Room Temperature)	8000.0
Test (Insulation Resistance Test)	4000.0
Test (Test)	3000.0
Type Tests (Type Tests along with Oxygen index,Temperature Index and Test for halogen acid gas evolution.)	37000.0
Type Tests (Type Tests along with Oxygen index,Temperature Index and Test for halogen acid gas evolution.)	41000.0
Tests (Tests)	16000.0
Tests (Tests)	27000.0
Tests (Tests)	31000.0
Type tests as per IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 along with Fire Properties: a) Oxygen index test ,b) Flame retardance test on single cable,c) Smoke density,d) Test for halogen acid gas evolution and e) Temperature index. (Tests)	86000.0
Tests (Tests)	5000.0
Tests (Type Tests,Category-01 and Optional Tests)	36500.0
Tests (Acceptance Tests,Category-C2.)	83000.0
Tests (Test for thickness of insulation and sheath,Resistance test,Hot Set Test,Insulation resistance (volume resistivity test) at Room Temperature and High Voltage Test at Room Temperature)	8000.0
Tests (Type Tests along with Oxygen index test ,Flame retardance test on single cable,Flame retardance test on bunched cable,Smoke density,Test for halogen acid gas evolution,Temperature index.)	92000.0
Tests (Insulation Resistance Test and High Voltage Test at ambient Temperature.)	6000.0
Conductor Resistance Test (Tests)	4000.0
1.Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Tensile Strength and elongation at break test for insulation and sheath. 4. High voltage test, 5. Insulation resistance (volume resistivity) test. (Tests)	9500.0
Tests (d) Conductor resistance tests, e) Test for thickness of insulation (eccentricity) and sheath, f) Hot set test for insulation, g) Tensile strength and elongation at break test for insulation and outer sheath and k) Insulation resistance (volume resistivity) test})	10500.0
Tests(single Core) (Hot Set Test,Test for thickness of Insulation & Sheath,Tensile Strength & Elongation at break and weight.)	5000.0
Routine Test (Conductor Resistance Test and High Voltage Test)	10000.0
Tests (Acceptance Tests: Conductor resistance test,Test for thickness of insulation and sheath ,Tensile strength and elongation at break test for insulation and sheath.High voltage test, and Insulation resistance (volume resistivity) test.)	14500.0
Tests (Marking,Conductor Resistance and High Voltage Test(2Core))	6500.0
Type Tests(4 Core) (Type Tests along with Oxygen index test,Smoke density,Test for halogen acid gas evolution,Temperature index.)	45998.0
Test (Weight of the Conductor)	3000.0
Additional Core(2 Core) (----)	4000.0
Additional Core (---)	2000.0
Tests(2 Core) (Conductor Resistance Test and Thickness of Insulation)	5000.0
Tests(4 Core) (1. Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Hot set test for insulation. 4. Tensile Strength and elongation at break test for insulation and sheath. 5. High voltage test, 6. Insulation resistance (volume resistivity) test.)	16500.0
Tests (1. Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Hot set test for insulation. 4. Tensile Strength and elongation at break test for insulation and sheath. 5. High voltage test, 6. Insulation resistance (volume resistivity) test.)	10500.0
Additional Core (---)	2000.0
Additional Core (----)	4000.0
Additional Core (----)	6000.0
Armour Percentage Coverage test (Armour Percentage Coverage test)	500.0
Tests(4 Core) (Acceptance tests with Oxygen Index, Temperature Index, Halogen Acid Evolution.)	34000.0
Tests(1 Core / 2Core) (Annealing Test (if Applicable), Tensile Test for Aluminium(If Applicable), Conductor Resistance Test, Test for the thickness of insulation and sheath,Hot Set Test(if Applicable),Tensile strength and elongation at break of Insulation and Outer Sheath, Insulation Resistance Test and High Voltage Test.)	10000.0
Tests(3 Core) (Annealing Test (if Applicable), Tensile Test for Aluminium(If Applicable), Conductor Resistance Test, Test for the thickness of insulation and sheath,Hot Set Test(if Applicable), Tensile strength and elongation at break of Insulation and Outer Sheath, Insulation Resistance Test and High Voltage Test.)	12000.0
Tests (High Voltage and Thickness of Insulation)	9000.0
Additional Core(8 Cores) (---)	14000.0
Tests (Tensile test for Aluminium and Wrapping test for Aluminum)	1500.0
Tests(1 Core) (Type tests as per IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 along with Fire Properties: a) Oxygen index test ,b) Flame retardance test on single cable, c) Flame retardance test on buncbed cable,d) Smoke density,e) Test for halogen acid gas evolution and f) Temperature index.)	90000.0
Additional Cores (---)	5998.0
PFC Tests(2 Core) (Acceptance Tests,Category-01.)	10000.0
Tests (High Voltage Test,Tensile Test(for Aluminium),Conductor Resistance Test, Tensile Strength and Elongation at Break Test for Insulation and Sheath(Before Ageing), Hot Set Test, Volume Resistivity (IR Test) as per IS 7098(Part-1).)	14500.0
Tests(4 core) (Type tests and fire tests:a) Oxygen index test, b) Flame retardance test on single cable,c) Flame retardance test on buncbed cable,d) Test for halogen acid gas evolution and e) Temperature index .)	56000.0
Test (Smoke density as per ASTM)	5000.0

2588

National Test House (NER), Guwahati

IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2589

National Test House (ER), Kolkata

EURAMET cg-2 (2011) - CALIBRATION OF GAUGE BLOCK COMPARATORS

CALIBRATION OF GAUGE BLOCK COMPARATORS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Length)	15000.0

2590

National Test House (WR), Mumbai

Customized specification for Polycarbonate seal - Customized specification for Polycarbonate seal

Customized specification for Polycarbonate seal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Breaking Strength ( On the lines of ASTM D 638 )-Breaking load between wire and seal in tension)	3000.0
- (Corrosive Resistance Test(On the lines of ASTM D 543-14))	2000.0
- (Heat Resistance Test(On the lines of ASTM D 3045-92))	2000.0

2591

National Test House (ER), Kolkata

Custom equaliser valve upper casing - Equaliser valve upper casing

Equaliser valve upper casing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon %)	1000.0
2 (Manganese %)	1000.0
3 (Silicon %)	1000.0
4 (Chromium %)	1000.0
5 (Nickel %)	1000.0
6 (Copper %)	1000.0
7 (Magnesium %)	1000.0

2592

National Test House (ER), Kolkata

FCO 1985 (as amended upto November 2023) - FCO 1985 (as amended upto October 2024)

FCO 1985 (as amended upto October 2024)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Total Nitrogen)	1000.0
2 (Ammoniacal Nitrogen)	1000.0
3 (Nitrate Nitrogen)	1000.0
4 (Urea Nitrogen)	1000.0
5 (Total phosphorous (as P2O5) percent by weight)	1000.0
6 (Water soluble phosphorous (as P2O5) percent by weight)	1000.0
7 (Available phosphorous (as P2O5) percent by weight)	1000.0
8 (Moisture percent by weight)	1000.0
9 (Sulphate Sulphur (as S))	1000.0
10 (Elemental Sulphur (as S) percent by weight)	1000.0
11 (Total elemental sulphur (as S), percent by weight)	1000.0
12 (Free acidity (as H2SO4) percent by weight)	1000.0
12 (Water soluble potassium as K2O, Percent by weight)	1000.0
13 (Particle size -material retained between 1mm and 4mm IS sieve)	1000.0
14 (Total Sulphur , Percent by weight)	1000.0
15 (Calcium Nitrate, Percent by weight)	1000.0
16 (Free phosphoric acid (as P2O5) percent by weight)	1000.0
17 (Magnesium as Mg , percent by weight)	1000.0
18 (Magnesium as MgO , percent by weight)	1000.0
19 (Magnesium as MgCl2, percent by weight)	1000.0
20 (Sodium as NaCl percent by weight)	1000.0
21 (Total Chlorides, as Cl percent by weight)	1000.0
22 (Matter insoluble in water, percent by weight)	1000.0
23 (pH of 5% solution)	1000.0
24 (As as As % by weight)	1000.0
25 (As as As2O3, % by weight)	1000.0
26 (Specific gravity at given temperature)	1000.0
27 (Biuret % by weight)	1000.0
28 (Particle size, percent retained between given IS sieves)	1000.0
29 (Manganese as Mn % by weight)	1000.0
30 (Zinc as Zn % by weight)	1000.0
31 (Zinc as Zn % by weight in the form of Zn EDTA)	1000.0
32 (Zinc as Zn % by weight in the form of Zn HEDP)	1000.0
33 (Iron/Fe as Fe % by weight in the form of FeHEDP)	1000.0
35 (Lead as Pb % by weight)	1000.0
36 (Cadmium as Cd % by weight)	1000.0
37 (Copper as Cu % by weight)	1000.0
38 (Iron as Fe % by weight)	1000.0
39 (Boron as B % by weight)	1000.0
40 (Calcium as Ca % by weight)	1000.0
12.1 (Molybdenum)	1000.0
55 (Fe as Fe-EDTA)	1000.0
56 (Appearance)	1000.0
1 (Total Nitrogen(ammoniacal and Urea)percent by weight)	1000.0
15 (Particle size-Minimum 90% of material shall be retained between 1mm and 4 mm IS sieve)	1000.0
1 (Carbon (% by mass))	1000.0
1 (Carbon : NItrogen ratio (C: N))	1000.0
1 (Bulk density)	1200.0
1 (Total organic carbon)	1200.0
1 (Manganese as Mn (% by mass))	1200.0
1 (Contamination level)	1200.0
1 (Efficiency Character)	1200.0
0 (Available Phosphorus (as P2O5),)	1000.0
0 (Colour)	1000.0
0 (Fluoride)	1000.0

2593

National Test House (NR), Ghaziabad

IRS-M-39-2000 (2000) - INDIAN RAILWAY STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACEPTANCE CRITERIA OF WIRE AND FLUX FOR SUBMERGED ARC WELDING OF STRUCTURAL STEEL FOR USE ON INDIAN RAILWAYS

INDIAN RAILWAY STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACEPTANCE CRITERIA OF WIRE AND FLUX FOR SUBMERGED ARC WELDING OF STRUCTURAL STEEL FOR USE ON INDIAN RAILWAYS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.7.3.3 (Radiographic Examination)	2000.0
5.7.3.3 (Radiographic Examination)	4000.0

2594

National Test House (ER), Kolkata

IS 1321 : Part 1 (2003) - Sisal ropes – Specification Part 1 Untarred varieties (fourth revision)

Sisal ropes – Specification Part 1 Untarred varieties (fourth revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Identification of Fiber)	2000.0
5.2 (Count of the Yarn)	1000.0
5.3 (No of Yarns per Strand)	500.0
5.3 (Lay of Strand)	500.0
5.4 (No. of Strands in the Rope)	500.0
5.4 (Lay of Rope)	500.0
5.4.1 (Angle of Lay)	1000.0
5.5 (Percentage of Lubricant)	2000.0
5.6 (Zinc Content)	1000.0
5.6 (Copper Content.)	1000.0
6.1 (Mass of the Coil)	1000.0
6.2 (Pitch)	1000.0
6.3 (Length of the Coil)	1000.0
6.4 (Linear Density of Rope)	1000.0
6.4 (Breaking Strength Of Rope)	5000.0
6.5 (Diameter of Rope)	500.0

2595

National Test House (WR), Mumbai

IS 10322 : Part 1 (2014) - Luminaires: Part 1 general requirements and tests (First Revision)

Luminaires: Part 1 general requirements and tests (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

2596

National Test House (WR), Mumbai

IS 374 (2019) - Specification for electric ceiling type fans and regulators (Third Revision)

Specification for electric ceiling type fans and regulators (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1,e (Input in watts)	10.0
14.5 (Power factor)	500.0
14.4 (Fan speed (RPM), %)	100.0

2597

National Test House (WR), Mumbai

Customer Specification - Electrical product

Electrical product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	75000.0
1 (As per Customer request)	20000.0
1 (As per customer requirement)	40000.0
5 (Tests as per Customer request)	45000.0
6 (Tests as per Customer request 2)	30000.0

2598

National Test House (ER), Kolkata

Custom-24-ER-LM - Pull out Test for Assembly

Pull out Test for Assembly

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Pull out Test for Assembly)	5000.0

2599

National Test House (ER), Kolkata

Custom- Driers Pb,Mn,Cu,Co - Custom- Driers Pb,Mn,Cu,Co

Custom- Driers Pb,Mn,Cu,Co

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Lead ,percent by mass)	1200.0
2 (Cobalt, percent by mass)	1200.0
3 (Manganese percent by mass)	1200.0
4 (Copper percent by mass)	1200.0

2600

National Test House (NER), Guwahati

IS 4759 (1996) - Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Mass of Zinc Coating, (g/m2))	2000.0
9.3 (Determination of Uniformity of Galvanizing Coating)	1000.0

2601

National Test House (ER), Kolkata

IS 2372:2021 - Timber for Cooling Towers-Specification

Timber for Cooling Towers-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.T1.3 (Species of Timber)	5000.0
4.T1.4 (Permissible stress-Bending and Tension Along Grain, Extreme Fibre stress)	3000.0
5.1 (Grading of Timber & defects in timber)	5000.0
6 (Dimension and Tolerances)	1000.0
7 (Treatment (IS 401:2001))	4000.0
7.1 (Depth of Penetration of Preservative)	1000.0

2602

National Test House (ER), Kolkata

1540 part-2 - QUICKLIME AND HYDRATED LIME FOR CHEMICAL INDUSTRIES SPECIFICATION

QUICKLIME AND HYDRATED LIME FOR CHEMICAL INDUSTRIES SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (ii) (Available lime [ as Ca (OH)2, percent by mass,)	2000.0

2603

National Test House (NR), Ghaziabad

IS 6649 (1985) - Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Rockwell C/ Vickers)	2000.0
8 (Mass of zinc coating)	2000.0
3 (Chemical Composition as per IS 1570 Part-2.)	500.0
3 (Inner Diameter, (Φ d1))	500.0
3 (Outer Diameter, (Φ d2))	500.0
8 (Uniformity of Coating)	1000.0
3 (Thickness, S)	500.0

2604

National Test House (NR), Ghaziabad

IS 164 (2015) - Ready mixed paint for road marking - Specification (Second Revision)

Ready mixed paint for road marking - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6.2.2 (Toxic metals as Pb Cd Cr: (Atomic Absorption Spectrophotometric methods))	2000.0
5.6.2.1 (Volatile Organic Compounds (VOC): (IS 101 (Part 2/Sec 1) and IS 101 (Part 2/Sec 2)))	3000.0
xii (Keeping properties (IS 101 (Part 6/Sec 2)))	5000.0
xi (Mass in kg/10 litre, (IS 101 (Part 1/Sec 7)))	500.0
x (Flash point (IS 101 (Part 1/Sec 6)))	600.0
ix (Residue on sieve, Max, (IS 101 (Part 8/Sec 1)))	500.0
viii-b (Resistance to wear a) For Grade 2 (as refer in IS 164))	1000.0
viii-a (Resistance to wear a) For Grade 1 (As refer in IS 164))	1000.0
vii (Recoating property (As refer in IS 164))	600.0
vi (Resistance to bleeding (As refer in IS 164))	500.0
v (Wet Opacity (IS 101 (Part 4/Sec 1)))	600.0
iv (Colour (IS 101 (Part 4/Sec 2)))	500.0
iii (Finish (IS 101 (Part 3/Sec 4)))	500.0
ii (Consistency (Annex D))	500.0
i (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1)))	500.0
5.5 table 1 i (Drying time, Max a) Surface dry (IS 101 (Part 3/Sec 1)))	500.0
5.4 (Lead Restriction, Max, (IS 101 (Part 8/Sec 5)))	1200.0
5.2 (Applications (Annex B))	500.0

2605

National Test House (NR), Ghaziabad

EN 14399 : Part 9 (2009) - High-Strength Structural Bolting Assemblies For Preloading - Part 9: System HR Or HV - Direct Tension Indicators For Bolt And Nut Assemblies

High-Strength Structural Bolting Assemblies For Preloading - Part 9: System HR Or HV - Direct Tension Indicators For Bolt And Nut Assemblies

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Internal Diameter)	500.0
3.1 (Dimensions as per EN 14399 - 9.)	2500.0

2606

National Test House (WR), Mumbai

ONGC Specification for protective coating (2005) - ONGC Offshore Design Section: Specification for protective coating

ONGC Offshore Design Section: Specification for protective coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ONGC Specification for protective coating (Touch Dry at 25 deg C (ASTM D 1640))	1200.0
ONGC Specification for protective coating (Hard Dry at 25 Deg C (ASTM D 1640))	1200.0
ONGC Specification for protective coating (Over Coating Interval (ASTM D 1640))	1200.0
ONGC Specification for protective coating (Pot Life at 25 Deg C)	1500.0
ONGC Specification for protective coating (Dry Film Thickness, per coat)	1200.0
ONGC Specification for protective coating (Volume Solid (ISO 3233))	2000.0
ONGC Specification for protective coating (Theoretical Covering Capacity)	1200.0
ONGC Specification for protective coating (Weight Per liter (ISO 2811))	1200.0
ONGC Specification for protective coating (Temperature Resistance (ASTM D 2485 Method A))	5000.0

2607

National Test House (WR), Mumbai

Civil lab Training - Evaluation of Building Materials through Quality Testing & Standard specification-Training

Evaluation of Building Materials through Quality Testing & Standard specification-Training

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Training)	5000.0

2608

National Test House (WR), Mumbai

IS 2046 (1995) - Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Colour and pattern)	500.0
5.2.1 (Surface Finish)	500.0
5.3 (Thickness)	1000.0
5.4.1 (Surface Defects)	1000.0
5.5 (Resistance to suface wear)	3000.0
5.5 (Resistance to immersion in Boiling water(mass increase))	1000.0
5.5 (Resistance to immersion in Boiling water(thickness increase))	1000.0
5.5 (Resistance to immersion in boiling water (Appearance))	500.0
5.5.3 (Resistance to Dry Heat at 180 degC.)	2000.0
5.5 (Dimensional Stability at Elevated Temperature (L))	1500.0
5.5 (Dimensional Stability at Elevated Temperature(T))	1500.0
5.5 (Dimensional Stability at 20 degC(L))	1000.0
5.5 (Dimentional Stability at 20 degC(T))	1000.0
5.5 (Resistance to Cracking)	2000.0
5.5 (Resistance to Scratching)	2000.0
5.5 (Resistance to Staining)	5000.0
5.5 (Resistance to colour change in Xenon arc light)	3000.0
5.5 (Resistance to Cigarate Burns)	2000.0
5.5 (Resistance to Steam)	2000.0
- (Density)	1000.0
5.5 (Tensile strength)	2000.0
5.5 (Flexural Strength)	2000.0
5.5 (Resistance to crazing)	1500.0
5.5 (Resistance to surface wear)	5000.0

2609

National Test House (WR), Mumbai

IS 266 (1993) - Sulphuric acid - Specification (Third Revision)

Sulphuric acid - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Total Acidity (as H2SO4))	1000.0
4.2 (Residue on ignition)	1000.0
4.2 (Iron (as Fe))	1000.0
4.2 (Chlorides (as Cl))	1000.0
4.2 (Lead (as Pb))	1000.0
4.2 (Arsenic (as As))	1000.0
4.2 (Oxidizable impurities (as SO2))	1000.0
4.2 (Organic matter)	1000.0
4.2 (Nitrates (as NO3))	1000.0
4.2 (Ammonia (as NH3))	1000.0
4.2 (Selenium (as Se))	1000.0
4.2 (Manganese (as Mn))	1000.0
4.2 (Copper (as Cu))	1000.0
4.2 (Zinc (as Zn))	1000.0
4.2 (Nitrates, nitrites & ammonia (as N))	1000.0

2610

National Test House (ER), Kolkata

MDTS-207(REV.-5.2) (2022) - Technical Specification for Fire Retardant Fibre Glass Wool with Single Side Heat Resistant Aluminium Foil.

Technical Specification for Fire Retardant Fibre Glass Wool with Single Side Heat Resistant Aluminium Foil.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.5 (Basis Weight)	1000.0
5.2.5 (Water Vapour Transmission Rate)	5000.0
5.2.5 (Bursting Strength)	2000.0
5.2.5 (Tensile Strength(Along Length))	2000.0
5.2.5 (Tensile Strength(Across the length))	2000.0
5.2.5 (Caliper Thickness)	1000.0
5.2.5 (Water immersion)	1000.0
5.2.5 (Mold Resistance)	3000.0
5.2.5 (Temperature resistant)	2000.0
5.2.5 (Dimension Stability)	2000.0