| 2671 |
National Test House (ER), Kolkata
| RCF Spec. No. EDTS-163,Rev. C - RCF Spec. No. EDTS-163,Rev. C |
RCF Spec. No. EDTS-163,Rev. C |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4.c (IP Protection Test) |
15000.0 |
|
| 7.4.f (Vibration and shock test) |
70000.0 |
|
| 7.4.f (Impact Test) |
15000.0 |
|
|
| 2672 |
National Test House (ER), Kolkata
| NTHER-Calibration of HV Probe - NTHER-Calibration of HV Probe |
NTHER-Calibration of HV Probe |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (NTHER-Calibration of HV Probe upto 40 kV) |
4000.0 |
|
| A2 (NTHER-Calibration of HV Probe upto 80 kV) |
7000.0 |
|
|
| 2673 |
National Test House (ER), Kolkata
| Custom: Bright bar |
- |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Carbon % by mass) |
1200.0 |
|
| 2 (Silicon % by mass) |
1200.0 |
|
| 3 (Manganese % by mass) |
1200.0 |
|
| 4 (Sulphur % by mass) |
1200.0 |
|
| 5 (Phosphorus % by mass) |
1200.0 |
|
| 6 (Lead % by mass) |
1200.0 |
|
|
| 2674 |
National Test House (ER), Kolkata
| AWWA C210-15 (2015) - Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal |
Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 Prequalification Requirements a) (Immersion and vapour resistance test for 30 days in:
1. Deionized Water
(ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1--ASTM D 6943)) |
3000.0 |
|
| Table 1 Prequalification Requirements b) (Immersion and vapour resistance test for 30 days in:
2. Sulphuric Acid,1% by weight
ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943) |
3000.0 |
|
| Table 1 Prequalification Requirements c) (Immersion and vapour resistance test for 30 days in:
3.Sodium Hydroxide, 1% by weight
ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943) |
3000.0 |
|
| Table 1 2 Prequalification Requirements (Cathodic disbondment test, 28 days, -1.5V
AWWA C 210 Clause No. 5.2.1.2 /*ASTM G 8) |
5000.0 |
|
| Table 1 3.Prequalification Requirements (Dielectric Strength
AWWA C 210-2015 Clause No. 5.2.1.3/ASTM D 149) |
10000.0 |
|
| Quality Control Requirements Table 2 1 (Appearance
AWWA C 210-2015 Clause No. 5.5.1) |
100.0 |
|
| Quality Control Requirements .2 Table 2 (Cure test
AWWA C 210-2015 Clause No. 5.5.2/ASTM D 5402) |
1000.0 |
|
| Quality Control Requirements 3 Table 2 (Dry Film Thickness
AWWA C 210-2015 Clause No. 5.5.3) |
1000.0 |
|
| Quality Control Requirements 4 Table 2 (Adhesion to steel (Pull Adhesion to steel (Pull Off Adhesion test)
ASTM D 4541) |
5000.0 |
|
| Quality Control Requirements 5. Table 2 (Electrical Continuity Inspection / (Pin-hole detector @ 2.5 KV)) |
5000.0 |
|
| Quality Control Requirements (Abrasion resistance - 'Abrasion resistance of organic coatings by the Taber Abraser" - 1 kg load / 1000 cycles CS 17 wheel or CS 10 wheel
ASTM D4060) |
5000.0 |
|
| Quality Control Requirements (Shore D hardness "ASTM D2240 ") |
1200.0 |
|
| Quality Control Requirements (Compressive Strength
"ASTM C109 ") |
5000.0 |
|
| ADD PARAMETER 1 (Potable Water Service test a)PH
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test b)Turbidity
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test d)Chloride
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test c)Total hardness
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test e)Nitrate
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test f)Iron
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test g)Arsenic
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test h)Fluoride
on the lines of IS 10500) |
1000.0 |
|
| 1.1 (Specific Gravity
(after Mixing Comp A+ Comp B)) |
1000.0 |
|
| additional parameter (Abrasion Resistance
1560Cycle/mill as per ASTM D4060) |
5000.0 |
|
| additional parameter (Adhesion to steel) |
1200.0 |
|
|
| 2675 |
National Test House (WR), Mumbai
| 2933 (Part 1) (2013) - Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications |
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Lead Restriction, (IS 101 (Part 8/Sec 5)) |
700.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (a) Consistency, (Annex C)) |
1000.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (b) Viscosity by ford cup No. 4 at (27 +/- 2 deg C), (IS 101 (Part 1/Sec 5))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Mass, kg/10 litre, Min, (IS 101 (Part 1/Sec 7))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : b) Hard dry (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : c) Tack free (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Wet opacity, Min, (IS 101 (Part 4/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Finish, (IS 101 (Part 3/Sec 4))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Fineness of grind, Max (IS 101 (Part 3/Sec 5))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Colour, (IS 101 (Part 4/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Water content (if water is suspected to be present), Max, (IS 101 (Part 2/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flexibility and adhesion: a) Scratch hardness, (Load 1000 g), clause 3 of (IS 101 (Part 5/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flexibility and adhesion: b) Bend test, (with 6.25 mm Dia Mandrel in type 1 apparatus), clause 2 of (IS 101 (Part 5/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Striping test (Annex D)) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flash Point, (IS 101 (Part 1/Sec 6))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Keeping properties , (IS 101 (Part 6/Sec 2))) |
5000.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Durability: Accelerated Weathering test (Xenon arc ) (clause no. 6.2 of IS 2933 (Part 1))) |
21600.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Durability: Normal Outdoor Exposure test for 12 Months (Annex B-3)) |
10000.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Total non-volatile matter, (IS 101 (Part 8/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Total pigment content) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Phthalic anhydride content of the non-volatile vehicle, (IS 101 (Part 8/Sec 4))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Please refer annexure) |
1.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Gloss (specular 60 deg), (IS 101 (Part 4/Sec 4))) |
500.0 |
|
|
| 2676 |
National Test House (SR), Chennai
| IS/IEC60947-1 - Low-voltage switchgear and control gear - Part 1: General rules |
Low-voltage switchgear and control gear - Part 1: General rules |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2.3 & 8.3.3.4 (The dielectric test (Power frequency withstand Test)) |
5000.0 |
|
| 8.3.3.3 (Temperature-rise limits of terminals - Table 2 as per IS/IEC 60947 -Part-1:2004) |
25000.0 |
|
| 10 (Marking) |
- |
|
|
| 2677 |
National Test House (SR), Chennai
| IS/IEC 60898 : PART 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2678 |
National Test House (SR), Chennai
| 1542 (1992) - Sand for Plastering |
Sand for Plastering |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Grading of Sand, (IS 2386 Part 1))) |
2000.0 |
|
| 4.4 (Compressive Strength (IS Appendix A of IS 2250), N/mm^2) |
2000.0 |
|
| 5.2 (Fineness Modulus of sand (IS 2386 (Part 1) from gradation)) |
500.0 |
|
| 4.4.1 (Water Required for Gauging (IS 1727 cl 9.5.3), %) |
1000.0 |
|
| 4.2 (Deleterious Materials, General observation (presence of iron pyrites, alkalies, salts, coal, mica, shale etc. - IS 2386)) |
1000.0 |
|
| 4.3 (Deleterious Materials, (a) Clay, Silt and Dust as per IS 2386 (Part 2) and (b) Organic impurities as per IS 2386 (Part -2 )) |
2000.0 |
|
| 6.2 (Bulk density-loose) |
500.0 |
|
| 6.2 (Bulk density-Compacted) |
500.0 |
|
| 6.2 (Water absorption) |
1000.0 |
|
| 6.2 (Specific gravity) |
500.0 |
|
| 4.1 (General - Visual Observation.) |
500.0 |
|
| custom (Materials finer than 75 microns IS sieve) |
1000.0 |
|
|
| 2679 |
National Test House (WR), Mumbai
| IS 14333 - High Density Polyethylene Pipe For Sewerage - |
High Density Polyethylene Pipe For Sewerage - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.4 (Melt Flow Rate (IS:14333 & IS:2530)) |
2000.0 |
|
| 8.2 (Reversion Test (IS:14333 & IS:4984)) |
1000.0 |
|
| 7.4 (Outside Diameter (IS:14333 & IS:4984)) |
500.0 |
|
| 7.4 (Wall Thickness (IS:14333 & IS:4984)) |
500.0 |
|
| 8.5 (Carbon Black Content and Dispersion) |
2000.0 |
|
| 8.6 (Density (IS:14333 & IS:7328)) |
2000.0 |
|
|
| 2680 |
National Test House (SR), Chennai
| CUS/SR/MECH-17 - Aluminium composite panel |
Aluminium composite panel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Total Thickness, mm) |
1000.0 |
|
| 2.0 (Breaking load) |
3000.0 |
|
| 3.0 (Panel Thickness) |
1000.0 |
|
| 4.0 (Weight, kg/m²) |
1000.0 |
|
| 5.0 (Tensile strength, N/mm² (on the lines of IS 1608)) |
1000.0 |
|
| 6.0 (Yield strength, N/mm² (on the lines of IS 1608)) |
1000.0 |
|
| 7.0 (Percentage Elongation, % (on the lines of IS 1608)) |
1000.0 |
|
|
| 2681 |
National Test House (SR), Chennai
| RDSO IRS S 63/2015 : Part 1 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 () |
- |
|
|
| 2682 |
National Test House (SR), Chennai
| RDSO IRS S 63/2014 : Part 0 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Conductor) |
100.0 |
|
| 3.2.1 (Insulation ) |
100.0 |
|
| 3.2.3 (Insulation ) |
100.0 |
|
| 3.2.4 (Insulation ) |
250.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.3.1 (LAYING UP (for power cable only)) |
100.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.4.1 (Inner Sheath) |
100.0 |
|
| 3.5.1 (Armouring) |
100.0 |
|
| 3.5.2 (Armouring (Applicable for power cable only)) |
100.0 |
|
| 3.6.1 (OUTER SHEATH) |
100.0 |
|
| 4.1 (Marking) |
100.0 |
|
| 5.2 (a) (Dimensions) |
1000.0 |
|
| 5.2 (a) (Elongation of annealed copper) |
1000.0 |
|
| 5.2 (b) (Conductor resistance ) |
2000.0 |
|
| 5.2 (c) (Dimensions of Armour Wires) |
1000.0 |
|
| 5.3 (c) (Tensile Strength ) |
1000.0 |
|
| 5.2 (c) (Elongation ) |
1000.0 |
|
| 5.2 (c) (Torsion test) |
1000.0 |
|
| 5.2 (c) (Winding test ) |
1000.0 |
|
| 5.2 (c) (Mass of Zinc coating test) |
1000.0 |
|
| 5.2 (c) (Uniformity of Zinc coating) |
1000.0 |
|
| 5.2 (c) (Resistivity test.) |
1500.0 |
|
| 5.2 (c) (closeness of armour tape) |
100.0 |
|
| 5.2 (d) (Thickness of insulation ) |
500.0 |
|
| 5.2 (d) (Thickness of insulation minimum ) |
500.0 |
|
| 5.2 (d) (Thickness of Outer sheath ) |
500.0 |
|
| 5.2 (d) (Thickness of inner sheath ) |
500.0 |
|
| Cl. 5.2(e)) (Tensile Strength of insulation) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength Insulation variation ) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength inner sheath variation ) |
500.0 |
|
| Cl. 5.2(e) ( Tensile strength outer sheath variartion) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath variation) |
500.0 |
|
| 5.2 (f) (Flammability Test) |
500.0 |
|
| 5.2.g) (High Voltage 4 kV a.c.) |
1500.0 |
|
| 5.2 ( h) (Insulation resistance test ) |
1000.0 |
|
| 5.2 (i) (Water immersion test AC TEST) |
1500.0 |
|
| 5.2 (i) (Water immersion test DC TEST) |
3000.0 |
|
| 5.2 (j) (visual inspection) |
100.0 |
|
| 5.2 (j) (Sequential marking . ) |
100.0 |
|
| 5.5.a) (Depth of indentation) |
1000.0 |
|
|
| 2683 |
National Test House (SR), Chennai
| Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements - Test as per Manufacture Specification |
Test as per Manufacture Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1kVA UPS Test as per Manufacture Specification) |
10000.0 |
|
| 2 (2kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 3 (3kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 4 (5kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 5 (10kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 6 (15kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 7 (20kVA UPS Test as per Manufacture Specification) |
40000.0 |
|
| 8 (Scientist Charges for Onsite Testing per day) |
5000.0 |
|
|
| 2684 |
National Test House (NWR), Jaipur
| IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1 (1) g (High Voltage) |
1500.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
1000.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase 3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-1) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average- Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-1) |
250.0 |
|
| 10.1 (1) c (v) (Water absorption (Gravimetric)) |
1500.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-NE) |
-250.0 |
|
| 10 .1 (1) b (i) (Breaking load :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) b (ii) (Elongation test :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) b (iii) (Conductor resistance :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) a (i) (Tensile Test) |
1000.0 |
|
| 10.1 (1) a (ii) (Wrapping test) |
500.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase 1) |
1000.0 |
|
| 10.1 (1) a (iii) (Tests on phase/street light conductor) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase 3 :
Tests on phase/street light conductor) |
1000.0 |
|
| 10.2 j (Volume resistivity for XLPE) |
500.0 |
|
| 10.2 k (High Voltage) |
1500.0 |
|
| 10.2 h (Hot set test-Elongation under load) |
250.0 |
|
| 10.2 e (Conductor resistance-Neutral) |
1000.0 |
|
| 10.2 e (Conductor resistance- Phase-2) |
1000.0 |
|
| 10.2 e (Conductor resistance- Phase-3) |
1000.0 |
|
| 10.1 C VI (1) (Carbon Black Content) |
1000.0 |
|
| 10.1 C VI (2) (Physical tests for XLPE insulation - Carbon Black Dispersion) |
1500.0 |
|
|
| 2685 |
National Test House (ER), Kolkata
| AAI BAGDOGRA AIRPORT SPECIFICATION (2023) - AAI BAGDOGRA AIRPORT SPECIFICATION |
AAI BAGDOGRA AIRPORT SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A (Thickness of ACP) |
1000.0 |
|
| A (Thickness of Aluminium Coil) |
1000.0 |
|
| B (Tensile Strength) |
1000.0 |
|
| B (Yield Strength) |
1000.0 |
|
| B (Elongation) |
1000.0 |
|
| F (Bend Test) |
2000.0 |
|
| C Paint Performance 1 (Specular gloss 60 degree angle
ASTM 523/4214) |
1000.0 |
|
| C PAINT Performance 2 (Thickness of coating in microns) |
1000.0 |
|
| C PAINT Performance 3 (Pencil Hardness test(11 ,11 B) ASTM 3363) |
1000.0 |
|
| C PAINT Performance 4 (Impact Resistance ASTM D 2794) |
2000.0 |
|
| D FIRE RESISTING BEHAVIOUR 3 (Surface Spread of Flame
(BS 476 Part VII)) |
5000.0 |
|
| E chemical &aging test 1 (chemical & Aging Test
1)Weathering & Conditioning test(ASTM D 2247) for 24 Hours) |
2000.0 |
|
| E chemical &aging test 2 (chemical & Aging Test
Salt Spray test for 500 hours(ISO 9227)) |
20000.0 |
|
| E chemical &aging test 2 (chemical & Aging Test
Salt Spray test for 3000 hours(ISO 9227)) |
100000.0 |
|
| E chemical &aging test 3 (Resistance to 5%(V/V)Hydrochloric acid solution for 24 hours) |
1000.0 |
|
| E chemical &aging test 3 (Resistance to 5%(V/V)H2SO4 acid solution for 24 hours) |
1000.0 |
|
|
| 2686 |
National Test House (ER), Kolkata
| Custom moisture-coal tar - Custom moisture-coal tar |
Custom moisture-coal tar |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture, percent by mass) |
1200.0 |
|
|
| 2687 |
National Test House (SR), Chennai
| Bituminous Membrane-L-n-T (2022) - Water Proofing Membrane Firms Specification |
Water Proofing Membrane Firms Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Bituminous Membrane Results Attached Annexure) |
21000.0 |
|
|
| 2688 |
National Test House (ER), Kolkata
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) [1100 kVA to 2 500 kVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.2(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 21.2(b) (Measurement of voltage ratio and,check ofvoltage vector relationship) |
2000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
20000.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
20000.0 |
|
| 21.3(b) (Temperatur Rise Test) |
40000.0 |
|
| 21.2(g) (Separate Source AC voltage withstand test) |
2500.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
5000.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
7000.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
1500.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), shortcurcuit impedance and load loss (At 50% and 100% load)) |
8000.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
6000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
4000.0 |
|
| 21.4(a) (Determination of sound levels) |
7000.0 |
|
| 21.4( e) (BDV of Oil in the tranformer) |
10000.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Air Pressure (Type test)-Deflection) |
20000.0 |
|
| 21.5.2.1 (Permanent Deflection) |
20000.0 |
|
| 21.4( e) (Break Down Voltage) |
10000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
4000.0 |
|
| 21.2(d) (No Load loss and current) |
6000.0 |
|
| 21.2(c) (Load Loss and % Impedance) |
8000.0 |
|
| 21.2(e) (Insulation Resistance) |
1500.0 |
|
| 21.4( c) (No load current) |
2000.0 |
|
| 8.9 (flux density and over fluxing) |
20000.0 |
|
| 7.9 (flux density and over fluxing) |
10000.0 |
|
| 21.5.3.3 (Oil leakage test) |
5000.0 |
|
| 21.2(g) (AC High Voltage Withstand Test) |
2500.0 |
|
| 21.3(b) (Temperature Rise of Oil and Windings.) |
40000.0 |
|
| 21.5.3.1 (Permanent Deflection) |
6000.0 |
|
| 21.4(a) (Determination of sound levels) |
7000.0 |
|
| As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test) |
5000.0 |
|
| As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current) |
15000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
5000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test) |
5000.0 |
|
| N.A. (Unbalance Current) |
5000.0 |
|
| CBIP Publication no. 317 (Polarization Index) |
2500.0 |
|
|
| 2689 |
National Test House (ER), Kolkata
| IRS:S63-2014 - PVC Insulated Underground, Unscreened Cable for Railway Signalling- Power Cable |
PVC Insulated Underground, Unscreened Cable for Railway Signalling- Power Cable |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.6.1 (Physical tests for conductor-Dimension) |
1000.0 |
|
| 5.6.2 (Physical tests for conductor-Annealing Test) |
2000.0 |
|
| 5.6.3 (Physical tests for conductor-Test for correspondence of cores) |
1000.0 |
|
| 5.7 (Conductor Resistance Test) |
2000.0 |
|
| 5.8.1 (Test for Armour wires/strips/tapes-Dimension) |
1000.0 |
|
| 5.8.2 (Test for Armour wires/strips/tapes- Tensile Strength and Percentage Elongation Test) |
2000.0 |
|
| 5.8.3 (Test for Armour wires/strips/tapes-Torsion Test (for Round wires only)) |
1000.0 |
|
| 5.8.4 (Test for Armour wires/strips/tapes-Winding Test(For Galvanised strips only)) |
2000.0 |
|
| 5.8.5(i)(a) (Test for Armour wires/strips/tapes-Tests for mass of Zinc Coating) |
1000.0 |
|
| 5.8.5(i)(b) (Test for Armour wires/strips/tapes-Tests for uniformity of Zinc Coating) |
1000.0 |
|
| 5.8.6 (Test for Armour wires/strips/tapes-Resistivity Test) |
2000.0 |
|
| 5.8.7 (Test for Armour wires/strips/tapes-Test for closeness of armour wires/strips) |
1000.0 |
|
| 5.9 (Test for thickness of insulation and sheath) |
1000.0 |
|
| 5.10.1(i) (Physical tests for insulation,inner & outer sheaths-Tensile strength and elongation at break) |
2000.0 |
|
| 5.10.2 (Physical tests for insulation,inner & outer sheaths-Shrinkage Test) |
1000.0 |
|
| 5.10.3 (Physical tests for insulation,inner & outer sheaths-Hot deformation test) |
1000.0 |
|
| 5.10.4 (Physical tests for insulation,inner & outer sheaths-Loss of mass test) |
2000.0 |
|
| 5.10.5 (Physical tests for insulation,inner & outer sheaths-Colour fastness to day-light exposure) |
2000.0 |
|
| 5.10.6 (Physical tests for insulation,inner & outer sheaths-Colour fastness to water) |
1000.0 |
|
| 5.10.7 (Physical tests for insulation,inner & outer sheaths-Bleeding and blooming Test) |
1000.0 |
|
| 5.10.8 (Physical tests for insulation,inner & outer sheaths-Cold bend test) |
2000.0 |
|
| 5.10.9 (Physical tests for insulation,inner & outer sheaths-Cold impact test) |
2000.0 |
|
| 5.10.10 (Physical tests for insulation,inner & outer sheaths-Heat shock test) |
2000.0 |
|
| 5.10.11 (Physical tests for insulation,inner & outer sheaths-Thermal stability test) |
2000.0 |
|
| 5.10.12 (Physical tests for insulation,inner & outer sheaths-Specific Gravity test for PVC) |
1000.0 |
|
| 5.11 (Flammability Test) |
2000.0 |
|
| 5.12 (High Voltage Test) |
3000.0 |
|
| 5.13 (Insulation resistance test) |
2000.0 |
|
| 5.14.1 (Water immersion-AC Test) |
3000.0 |
|
| 5.15 (Visual inspection test-) |
1000.0 |
|
| 5.9 (Test for thickness of insulation and sheath) |
1000.0 |
|
|
| 2690 |
National Test House (WR), Mumbai
| ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers/Tension |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers/Tension |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength) |
2000.0 |
|
| - (Elongation (Both directions)) |
2000.0 |
|
|
| 2691 |
National Test House (WR), Mumbai
| IS 1848 : Part 2 (2018) - Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision) |
Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Substance (Grammage),) |
1000.0 |
|
|
| 2692 |
National Test House (NWR), Jaipur
| IS 9926 (1981) - SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS |
SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Visual examination) |
- |
|
| 7.2 (Dimension: Diameter of the Wire) |
1000.0 |
|
| 7.3 (Resistance test: Calculated resistance corrected to 20°C) |
3000.0 |
|
| 7.4 (Persulphate Test) |
2000.0 |
|
|
| 2693 |
National Test House (NWR), Jaipur
| IS 733 (2025) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass) |
3000.0 |
|
| 5.1.1 b Chemical composition (Copper (as Cu)content,% by mass) |
500.0 |
|
| 5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass) |
500.0 |
|
| 5.1.1 d Chemical composition (Silicon (as Si) content,% by mass) |
500.0 |
|
| 5.1.1 e Chemical composition (Iron (as Fe) content,% by mass) |
500.0 |
|
| 5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass) |
500.0 |
|
| 5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass) |
500.0 |
|
| 5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass) |
500.0 |
|
| 5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass) |
500.0 |
|
| 5.1.1 j Chemical composition (Vanadium (as V) content,% by mass) |
500.0 |
|
|
| 2694 |
National Test House (SR), Chennai
| IBR 1950 (2023) - Qualified Boiler Welder's Certificate |
Qualified Boiler Welder's Certificate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IBR 1950 (Welder qualification) |
4500.0 |
|
| NTH Additional Charges for Testing (Scientist Charges) |
5000.0 |
|
|
| 2695 |
National Test House (WR), Mumbai
| IS 1528 (2010) - Refractory materials |
Refractory materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 4 (Cold Crushing Strength (as per IS 1528 (Part 4): 2012), in N/mm^2) |
2500.0 |
|
| Part 8 / Part 15 (Apparent Porosity [on the lines of IS 1528 (Part 8)/ IS 1528 (Part 15)], %) |
1000.0 |
|
|
| 2696 |
National Test House (SR), Chennai
| IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963) |
2000.0 |
|
| 2 (Test for Specific Gravity
(IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
| 4 (Test for Bulk Density-Loose condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 5 (Test for Bulk Density-Compacted condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 6 (Test for Silt content- (CPWD Specification)) |
1000.0 |
|
| 7 (Deleterious Materials) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 9 (Test for Alkali aggregate reaction- Chemical method
(IS 2386(Part 7):1963)) |
3000.0 |
|
| 10 (Test for bulking of sand) |
1000.0 |
|
| Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT) |
1000.0 |
|
| 5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3) |
1000.0 |
|
| 5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT) |
1000.0 |
|
| 8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963)) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
|
| 2697 |
National Test House (NWR), Jaipur
| MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works
803.4.2 |
Ministry of Road Transport and Highways - Specifications form Road And Bridge Works
803.4.2 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 803.4.1.2 (Drying Time) |
1200.0 |
|
| 803.4.1.2 (Titanium Dioxide, as TiO2 % by mass
(BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Colour) |
1200.0 |
|
| 803.4.1.2 (Softening point (BS 3262 (Part 1))
ASTM D 36) |
1200.0 |
|
| 803.4.1.2 (Cracking Resistance (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Glass Bead content % (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.2.3 (Roundness) |
1000.0 |
|
| 803.4.2.3 (Free flowing properties) |
500.0 |
|
| 803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088)) |
700.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088)) |
500.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Appearance) |
500.0 |
|
| 803.4.1.2 (Skid Resistance) |
1000.0 |
|
|
| 2698 |
National Test House (ER), Kolkata
| IS 2645:2003 (RA 2017) - Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification |
Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2.a. (Setting time -Initial) |
500.0 |
|
| 3.2.b (Setting time-Final) |
500.0 |
|
| 3.3.a (Compressive strength-3 days) |
2000.0 |
|
| 3.3.b (Compressive strength-7 days) |
2000.0 |
|
| 3.4 (Chloride content) |
2000.0 |
|
| - (Appearance) |
1000.0 |
|
| - (Bulk density) |
1000.0 |
|
| - (pH) |
1000.0 |
|
|
| 2699 |
National Test House (SR), Chennai
| CUS/SR/MECH-16 - Nylon Rope |
Nylon Rope |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Breaking load, kN) |
3000.0 |
|
|
| 2700 |
National Test House (NR), Ghaziabad
| IS 11673 : Part 1 (2019) - Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Sodium chlorate ( as NaClO3)) |
1200.0 |
|
| 5.3 (Iron (as Fe)) |
1200.0 |
|
| 5.3 (Free sodium carbonate (as Na2CO3)) |
1200.0 |
|
| 5.3 (Free alkali (as NaOH)) |
1200.0 |
|
| 5.3 (Total chlorine (as Cl)) |
1200.0 |
|
| 5.3 (Available chlorine (as Cl)) |
1200.0 |
|
| 5.3 (Relative density (at 250/250 C)) |
1200.0 |
|
|
