| 211 |
National Test House (WR), Mumbai
| NTH_CUSTOM/2026/025 - PROFICIENCY TESTING FOR RUBBER |
PROFICIENCY TESTING FOR RUBBER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength) |
- |
|
| - (Tear Strength) |
- |
|
| - (Shore A hardness (Durometer hardness)) |
- |
|
| - (Ash Contents) |
- |
|
| - (Density) |
- |
|
| - (Carbon Black Contents) |
- |
|
|
| 212 |
National Test House (ER), Kolkata
| IS 2380 ( Part, I to XXI) • 1977 - Indian Standard - METHODS OF TEST FOR WOOD PARTICLE BOARDS AND BOARDS FROM OTHER LIGNOCELLULOSIC MATERIALS |
Indian Standard - METHODS OF TEST FOR WOOD PARTICLE BOARDS AND BOARDS FROM OTHER LIGNOCELLULOSIC MATERIALS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part XiV (Screw Withdrawal Test) |
1500.0 |
|
|
| 213 |
National Test House (NER), Guwahati
| #IS 9537 - Conduits for Electrical installations |
Conduits for Electrical installations |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 7.2 (Checking outer dia) |
1500.0 |
|
|
| 214 |
National Test House (ER), Kolkata
| IS 9000 : Part III : Sec 5 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dry Heat Test) |
10000.0 |
|
| 4 (Dry Heat Test) |
20000.0 |
|
| 4 (Dry Heat Test) |
20000.0 |
|
|
| 215 |
National Test House (WR), Mumbai
| NTH_CUSTOM/2026/024 - ASTM D 1248 |
ASTM D 1248 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Description of the sample ) |
500.0 |
|
| - (Density) |
1000.0 |
|
| - (Water absorption for 24 hours ) |
1000.0 |
|
| - (Water absorption (Long term immersion)) |
4000.0 |
|
|
| 216 |
National Test House (NER), Guwahati
| # IS 456 (2000) - CONSTRUCTION WATER |
CONSTRUCTION WATER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 217 |
National Test House (ER), Kolkata
| #IS 1161 - Steel Tubes for Structural Purposes |
Steel Tubes for Structural Purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl. 7 (Visual Examination) |
1000.0 |
|
| Cl.11.2 (Tensile test) |
3000.0 |
|
| Cl.6 (Dimensions) |
1000.0 |
|
| Cl.9 (Straightness) |
1000.0 |
|
| Cl.6 (Mass) |
1000.0 |
|
| Cl.11.3 (Bend test /Flattening) |
1000.0 |
|
| Cl.5.1 (Chemical analysis without Carbon Equivalent) |
2000.0 |
|
| Cl.5.1 (Chemical analysis with carbon Equivalent) |
4000.0 |
|
| Cl.8 (Galvanisation (Optional)) |
3000.0 |
|
|
| 218 |
National Test House (WR), Mumbai
| NTH_CUSTOM/2026/023 - IBR 1950 |
IBR 1950 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Duplicate Test Certificate) |
1200.0 |
|
|
| 219 |
National Test House (NR), Ghaziabad
| ND Custom 9 (2023) - Training on Manual Metal Arc welding/ Gas Metal arc Welding |
Training on Manual Metal Arc welding/ Gas Metal arc Welding |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (One Day Training Programme on MMAW/GMAW) |
1000.0 |
|
| 2 (Two Days Training Programme on MMAW/GMAW) |
1000.0 |
|
| 3 (Three Days Training Programme on MMAW/GMAW) |
3000.0 |
|
| 4 (Four Days Training Programme on MMAW/GMAW) |
4000.0 |
|
| 5 (Five Days Training Programme on MMAW/GMAW) |
5000.0 |
|
|
| 220 |
National Test House (ER), Kolkata
| #IS 2062 (Part 1 & Part 2) - Structural Steel |
Structural Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.7 (Visual Examination) |
1000.0 |
|
| Cl.14 (Dimension) |
1000.0 |
|
| Cl.10 (Tensile test) |
3000.0 |
|
| Cl.11 (Bend test) |
1000.0 |
|
| Cl.12 (Impact test (Including & Above 12mm Thick)) |
5000.0 |
|
| Cl. 5 ,8.1, 8.2 (Chemical analysis (Without Micro Alloys)) |
2500.0 |
|
| Cl. 5 ,8.1, 8.2 (Chemical Analysis as per Part 2 of IS 2062) |
7500.0 |
|
| Cl. 5 ,8.1, 8.2 (Chemical Analysis with micro-alloys) |
5000.0 |
|
| Cl 13 (Weld Crackability Test) |
2000.0 |
|
|
| 221 |
National Test House (NR), Ghaziabad
| # Paving dummy formula(IS 15658) - Paving dummy formula(with DRY abrasion) |
Paving dummy formula(with DRY abrasion) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Paving dummy formula(IS 15658) (Paving dummy formula(IS 15658)) |
1.0 |
|
|
| 222 |
National Test House (WR), Mumbai
| MMDTS 18034 REV-02 - Developmental Technical specification for PU Based Wet-On-Wet applicable Exterior
Painting System for LHB Type Coaches. |
Developmental Technical specification for PU Based Wet-On-Wet applicable Exterior
Painting System for LHB Type Coaches. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (ANTI-GRAFFITI TEST,ASTM D-6578) |
5000.0 |
|
| 2 (Dry Film thickness) |
1200.0 |
|
| 3 (Weathering resistance (QUV 1000 hrs)) |
50000.0 |
|
| 4 (Corrosion resistance (ASTM B117, 1000 hrs)) |
50000.0 |
|
|
| 223 |
National Test House (NWR), Jaipur
| IS 3885 (Part 2) (1992) - Steel for the Manufacture of Laminated Springs (Railway Rolling Stock) - Part 2 : Rib and Groove Sections |
Steel for the Manufacture of Laminated Springs (Railway Rolling Stock) - Part 2 : Rib and Groove Sections |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Brinell Hardness) |
2000.0 |
|
| 11 (Dimension ( Thickness & Width)) |
1000.0 |
|
| 10 (Freedom From Defects) |
1000.0 |
|
|
| 224 |
National Test House (WR), Mumbai
| MMDTS 18034 Rev.05 - Technical specification for PU based Wet-on-Wet applicable Exterior Painting System of LHB type coaches |
Technical specification for PU based Wet-on-Wet applicable Exterior Painting System of LHB type coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.X (Anti-graffiti Test) |
5000.0 |
|
| 3.VIII (Cyclic Corrosion (ISO-11997-1 Cycle A for 1000 hours)) |
50000.0 |
|
| 3.IX (Distinctness of Image (DOI)) |
10000.0 |
|
| 1 (Total Painting Time allowed) |
2000.0 |
|
| 1 (UV Weathering Resistance for 1500 hours) |
60000.0 |
|
| 2 (Chemical resistance 30% H2SO4) |
3000.0 |
|
| 3 (Chemical resistance - 20% NaOH) |
3000.0 |
|
| 4 (Abrasion Resistance, 1000 cycles Cs 17) |
2000.0 |
|
| 5 (Gloss) |
1200.0 |
|
| 6 (DFT) |
1200.0 |
|
|
| 225 |
National Test House (WR), Mumbai
| MMDTS 18034 (Rev. 04) (2019) - Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches. |
Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 226 |
National Test House (ER), Kolkata
| #IS 21 - Aluminium |
Aluminium |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.8 of IS 737 (Tensile test
) |
3000.0 |
|
| Cl.8.2 of IS 737 (Bend test
) |
1500.0 |
|
| Cl.7 of IS 737 (Chemical analysis
) |
5000.0 |
|
|
| 227 |
National Test House (ER), Kolkata
| #IS 1079 - Hot Rolled Steel Sheets |
Hot Rolled Steel Sheets |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.13 (Dimensions) |
1000.0 |
|
| Cl.8 (Tensile test) |
3000.0 |
|
| Cl.10 (Cupping test) |
2000.0 |
|
| Cl.9 (Bend test) |
1000.0 |
|
| Cl 7.1 & 7.2 (Chemical composition test) |
2000.0 |
|
|
| 228 |
National Test House (ER), Kolkata
| #IS 778 - Copper Gate/ Check Valves |
Copper Gate/ Check Valves |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 229 |
National Test House (ER), Kolkata
| #IS 737 - Wrought Aluminium |
Wrought Aluminium |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.5 (Freedom from defects) |
1000.0 |
|
| Cl.9 (Dimensions) |
1000.0 |
|
| Cl.7.1 (Tensile test) |
3000.0 |
|
| Cl.7.2 (Bend test) |
1000.0 |
|
| Cl.6 (Chemical analysis) |
5000.0 |
|
|
| 230 |
National Test House (SR), Chennai
| # IS 1725 (2023) - Stabilized soil blocks used in the general building construction |
Stabilized soil blocks used in the general building construction |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (General Quality) |
500.0 |
|
| 7.2 (Dimension-length) |
500.0 |
|
| 7.2 (Dimension-Width) |
500.0 |
|
| 7.2 (Dimension-Height) |
500.0 |
|
| 7.4 (Frog) |
1000.0 |
|
| 8.1 (Dry Density of the Block) |
1000.0 |
|
| 8.2 (Compressive Strength) |
2000.0 |
|
| 8.3 (Water Absorption) |
1000.0 |
|
| 8.4 (Linear Expansion on Saturation) |
1500.0 |
|
| 8.5 (Weathering) |
2000.0 |
|
|
| 231 |
National Test House (WR), Mumbai
| M&C/PCN/132/2021 - RDSO Specification for Painting of Helical Coils Springs of LHB Coaches and similar application (single pack) |
RDSO Specification for Painting of Helical Coils Springs of LHB Coaches and similar application (single pack) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Drying Time (Hard Dry)) |
1200.0 |
|
| 3 (Finish) |
1200.0 |
|
| 5 ((a) Dry Film thickness,(b) Cumulative DFT) |
2400.0 |
|
| 15 (Mass in kg/10 litres.) |
1200.0 |
|
| 14. e. (i) (Resistance to solvent (Acetone)) |
1500.0 |
|
| 14. e. (ii) (Resistance to solvent (Xylene)) |
1500.0 |
|
| 14.e.(iii) (Resistance to solvent (Ethanol)) |
1500.0 |
|
| 14.(f) (Resistance to Raw water/ Tape water) |
1200.0 |
|
| 23 (Viscosity by Ford Cup no.4) |
1200.0 |
|
| 6 (Volume solids %) |
2000.0 |
|
| 2 (Consistency) |
1200.0 |
|
| 4 (Colour) |
1200.0 |
|
| 7 (Scratch Hardness (at 1.5 kg load)) |
1200.0 |
|
| 8 (Flexibility and Adhesion ( 6.25 mm Mandrel)) |
1200.0 |
|
| 9 (Flash Point) |
1200.0 |
|
| 13 (Covering Capacity per coat) |
1200.0 |
|
| 16 (Impact Resistance Test) |
1500.0 |
|
| 17 (Fineness of Grind) |
1200.0 |
|
| 18 (Adhesion Test (Cross cut )) |
1500.0 |
|
| 19 (Disel Resistance Test) |
1200.0 |
|
|
| 232 |
National Test House (ER), Kolkata
| # IS 2062 Part 1 - Carbon Steel |
Carbon Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Carbon Steel ) |
5000.0 |
|
|
| 233 |
National Test House (ER), Kolkata
| # IS 4923 - Hallow steel section for structural use |
Hallow steel section for structural use |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 10.2 (Dimensions) |
1000.0 |
|
| Cl 8 (Weight) |
1000.0 |
|
| 15 (Tensile) |
3000.0 |
|
| Cl 10.7 (Straightness & twist test) |
1000.0 |
|
| Cl 10.4 (Concavity / Convexity test) |
1000.0 |
|
| Cl 10.5 (Squareness of the Sides) |
1000.0 |
|
| Cl 10.5 (Squareness of the Sides) |
1000.0 |
|
| Cl 10.6 (External Corner Radius) |
1000.0 |
|
| Cl 13 (Marking) |
500.0 |
|
| Cl 11 (Oiling & painting test) |
1000.0 |
|
| Cl 7 (Chemical analysis) |
1500.0 |
|
|
| 234 |
National Test House (NER), Guwahati
| #IS 1786n - HSD Bar (12 - 28 mm) |
HSD Bar (12 - 28 mm) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.3 (Mass per meter run) |
1000.0 |
|
| Cl.9.2 (Tensile test) |
3000.0 |
|
| Cl.9.3 (Bend test) |
1000.0 |
|
| Cl.5.7 (Rebend test) |
1000.0 |
|
| Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE)) |
2500.0 |
|
| 3.1 (Nickel (% by mass)) |
500.0 |
|
| 3.1 (Copper (% by mass)) |
500.0 |
|
| 3.1 (Chromium (% by mass)) |
500.0 |
|
| 3.1 (Molybdenum (% by mass)) |
500.0 |
|
| Cl.4.2 (Chemical analysis without CE) |
2000.0 |
|
| 4.2 (carbon by mass) |
500.0 |
|
| 4.2 (C.E.) |
2000.0 |
|
| 4.2 (Phosphorus) |
500.0 |
|
| 4.2 (Sulphur plus Phosphorus) |
500.0 |
|
| 4.2 (carbon by mass) |
500.0 |
|
| 4.2 (sulphur) |
500.0 |
|
| 4.2 (Phosphorus) |
500.0 |
|
| 4.2 (Sulphur plus Phosphorus) |
500.0 |
|
| 4.2 (C.E.) |
2000.0 |
|
|
| 235 |
National Test House (NER), Guwahati
| #IS 1786 - HSD Bar (28 -32 mm) |
HSD Bar (28 -32 mm) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.3 (Mass per meter run) |
1000.0 |
|
| Cl 9.2 (Tensile test) |
3500.0 |
|
| Cl.9.3 (Bend test) |
1000.0 |
|
| Cl.9.4 (Rebend test) |
1500.0 |
|
| Cl.8 (TS/YS Ratio) |
500.0 |
|
| Cl.5 (Total Elongation at Maximum Force) |
500.0 |
|
| Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE)) |
2500.0 |
|
| 3.1 (Nickel (% by mass)) |
500.0 |
|
| 3.1 (Copper (% by mass)) |
500.0 |
|
| 3.1 (Chromium (% by mass)) |
500.0 |
|
| 3.1 (Molybdenum (% by mass)) |
500.0 |
|
| Cl.4.2 (Chemical analysis without CE) |
2000.0 |
|
| 3.1 (Molybdenum (% by mass)) |
500.0 |
|
| 3.1 (Chromium (% by mass)) |
500.0 |
|
|
| 236 |
National Test House (NER), Guwahati
| #IS 1786 - HSD Bar (up to 12 mm) |
HSD Bar (up to 12 mm) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.9.2 (Tensile test) |
2000.0 |
|
| Cl.9.3 (Bend test) |
1000.0 |
|
| Cl.9.4 (Rebend test) |
1000.0 |
|
| Cl.8 (TS/YS Ratio) |
500.0 |
|
| Cl.8 (Total Elongation at Maximum Force) |
500.0 |
|
| Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE)) |
2500.0 |
|
| 3.1 (Nickel (% by mass)) |
500.0 |
|
| 3.1 (Copper (% by mass)) |
500.0 |
|
| 3.1 (Chromium (% by mass)) |
500.0 |
|
| 3.1 (Molybdenum (% by mass)) |
500.0 |
|
| Cl.4.2 (Chemical analysis without CE) |
2000.0 |
|
| Cl.3 (Mass per meter run) |
1000.0 |
|
|
| 237 |
National Test House (WR), Mumbai
| AWWA C210 (2024) - Liquid - Epoxy Coatings and lining for Steel Water Pipe And fittings |
Liquid - Epoxy Coatings and lining for Steel Water Pipe And fittings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Additional Parameter (Colour) |
1000.0 |
|
| 5.5.2 (Appearance) |
1000.0 |
|
| 5.5.3 (Cure) |
1000.0 |
|
| 5.5.4 (Dry Film Thickness) |
1000.0 |
|
| 5.5.5 (Electrical Continuity) |
5000.0 |
|
| 5.5.6 (Pull of adhesion) |
5000.0 |
|
| 5.2.1 (Immersion & Vapor phase 30 days (DI Water)) |
2000.0 |
|
| 5.2.1 (Immersion & Vapor phase 30 days (Sulphuric acid 1% by wt.)) |
2000.0 |
|
| 5.2.1 (Immersion & Vapor phase 30 days (Sodium Hydroxide 1% by wt.)) |
2000.0 |
|
| 5.2.2 (Cathodic Disbondment Test) |
5000.0 |
|
| 5.2.5 (Water Absorption) |
2000.0 |
|
| 5.2.6 (Water Vapor Transmission) |
5000.0 |
|
| Additional parameter (Drinking water test (as per annex 1 of IS 16676 : 2017)) |
12000.0 |
|
|
| 238 |
National Test House (NR), Ghaziabad
| Custom specification NTH WR Two Component Paint & Coating System - Specification for Surface preparation and protective coating paint |
Specification for Surface preparation and protective coating paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Adhesion by Tape Test (ASTM D 3359)) |
1500.0 |
|
| Two component paint system (Adhesion by Hatch Cut (ASTM D 3359 method B)) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Please referred annexure) |
20000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water vapour permeability) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Flash Point) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Volume Solid (ISO 3233)) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Dry Film Thickness (DFT) Per Coat) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Theortical Coverage capacity) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Weight per liter (Mix paint) (ISO 2811)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Specific Gravity (Base) (ISO 2811)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Specific gravity (Hardner) (ISO 2811)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Touch Dry @ 30 deg. C (ASTM D 1640)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Hard Dry @ 30 Deg. C (ASTM D 1640)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Full Cure @ 30 Deg. C (ASTM D 1640)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Over coating interval (ASTM D 1640)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Pot Life @ 30 deg. C.) |
1500.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Pull Off Adhesion Test (ASTM D 4541)) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Abrasion Resistance, (1kg load, 1000 cycles, Wheel CS-17) (ASTM D 4060)) |
3000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Temp Resistance (ASTM D 2485 Method A)) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Temp Resistance (ASTM D 2485 Method B)) |
18000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Ash content (Mix paint) (ASTM D 1650)) |
1.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Volatile Matter (Mix Paint)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Non Volatile Matter (ISO 3251)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (100% Humidity test, duration 1440 hrs (ASTM D 2247)) |
45000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Thermal Shock Resistance Test (Method A): 5 cycles @ 30 minutes in furnace at 120 deg. C and 15 min in water after quenching in water for each cycle. (ASTM D 2485 Method A)) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cathodic disbondment Test (ASTM G8 @ 30 days, Temp 20-30 deg.C)) |
10000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Volume Solid (ASTM D 2697)) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Solid content (ISO 3233)) |
1200.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Impact Resistance (ASTM D 2794)) |
1500.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water absorption (Immersion 30 days, ASTM D 570)) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Salt Spray Test (5% NaCl solution @ 35 deg C) 1440 hrs) |
57600.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Holiday test (ASTM D 5162)) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cyclic Test 4200 hrs:-
Salt Spray : 72 hrs., Drying in air : 16 hrs., UV-A340 nm weather meter: 80 hrs. One cycle: 168 hrs.
(25 cycles at 168 hrs. each cycle)(ASTM D5894)) |
200000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
a) 10% NaOH 1000 hrs) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
b) 40% NaOH 1000 hrs) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
c) 5% H2SO4 168 hrs) |
2000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
d) Xylene 4 weeks) |
3000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
e) Acetone 4 weeks) |
3000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
f) Ethanol 4 weeks) |
3000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543)
g) Kerosene 4 weeks) |
3000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 870)
Water Immersion Sea/DM Water, 2000 hrs.) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cathodic disbondment test @ 60 deg C for 30 days (ASTM G8)) |
12000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Immersion in DM/DI water @ 90 Deg C for 30days (ASTM C 868)) |
5000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cathodic disbondment test @ 60 deg C for 30 days (ASTM G8)) |
12000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Ash content (Mix paint) (ASTM D 1650)) |
1.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Non Volatile Matter (Mix Paint) (ASTM D 1353)) |
1200.0 |
|
| Custom specification NTH WR Two Component Paint & Coating System (Ash content (Base), ASTM D 1650) |
1200.0 |
|
| Custom specification NTH WR Two Component Paint & Coating System (Ash content (Hardener), ASTM D 1650) |
1200.0 |
|
| Custom specification NTH WR Two Component Paint & Coating System (Non volatile matter (Base) ISO 3251) |
1200.0 |
|
| Custom specification NTH WR Two Component Paint & Coating System (Non volatile matter (Hardener) ISO 3251) |
1200.0 |
|
| Custom specification NTH WR Two Component Paint & Coating System (Volatile matter (Base), ASTM D 2369) |
1200.0 |
|
| Custom specification NTH WR Two Component Paint & Coating System (Volatile Matter (Hardener), ASTM D 2369) |
1200.0 |
|
| Two component paint (Volatile Organic Compound (VOC)) |
4000.0 |
|
| Specification for Surface preparation and protective coating (Please refer annexure for the test results) |
10000.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Salt Spray Test (5% NaCl solution @ 35 deg C) 1440 hrs) |
57600.0 |
|
| Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Abrasion Resistance, (1kg load, 1000 cycles, Wheel H-18) (ASTM D 4060)) |
3000.0 |
|
| Specification for Surface preparation and protective coating paint (Salt Spray Test (ASTM B 117), For 400 Hrs) |
16000.0 |
|
| Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (Salt Spray Test for 300 hrs) |
12000.0 |
|
| - (Water absorption at ambient temperature (ASTM D 570)) |
2000.0 |
|
| Specification for Surface preparation and protective coating paint (Please refer annexure for the test result) |
2000.0 |
|
| Specification for Surface preparation and protective coating paint (Please refer annexure for the test result) |
5000.0 |
|
| Specification for Surface preparation and protective coating (Please refer annexure for the test results) |
10000.0 |
|
| TWO COMPONENT Paint & coating system (Water Content (IS 101 (Part 2/Sec 1) : 2018) |
1200.0 |
|
| TWO COMPONENT Paint & coating system (Immersion Test - 10% NaCl for 30 days (ASTM D 543)) |
3000.0 |
|
| Specification for Surface preparation and protective coating paint (Chemical resistance test: Salt (3% NaCl solution), for 24 Hrs) |
1500.0 |
|
| Two Component Paint & Coating System (Pigment content) |
1500.0 |
|
|
| 239 |
National Test House (NER), Guwahati
| # IS 16709 (2017) - Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement - Specification |
Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1, SI. No. (i) (a) (Sack length) |
500.0 |
|
| Table 1, SI. No. (i) (b) (Sack width) |
500.0 |
|
| Table 1, SI. No. (i) (c) (Closure Width, Top & Bottom) |
1000.0 |
|
| Table 1, SI. No. (i) (d) (Patch length (top closure)) |
500.0 |
|
| Table 1, SI. No. (i) (e) (Patch height (top closure)) |
500.0 |
|
| Table 1, SI. No. (i) (f) (Patch length (bottom closure)) |
500.0 |
|
| Table 1, SI. No. (i) (g) (Patch height (bottom closure)) |
500.0 |
|
| Table 1, SI. No. (i) (h) (Valve Length) |
500.0 |
|
| Table 1, SI. No. (i) (j) (Valve sleeve width) |
500.0 |
|
| Table 1, SI. No. (i) (k) (Valve sleeve length) |
500.0 |
|
| Table 1, SI. No. (ii) (Ends per dm) |
500.0 |
|
| Table 1, SI. No. (iii) (Picks per dm) |
500.0 |
|
| Table 1, SI. No. (iv) (Mass of Sack) |
1000.0 |
|
| Table 1, SI. No. (v) (a) (Average breaking strength of fabric (Length wise)) |
1000.0 |
|
| Table 1, SI. No. (v) (b) (Average breaking strength of fabric (Width wise)) |
1000.0 |
|
| Table 1, SI. No. (vi) (Weld strength of Top & Bottom Closure) |
2000.0 |
|
| Table 1, SI. No. (vii) (a) (Elongation at break of fabric (Length wise)) |
1000.0 |
|
| Table 1, SI. No. (vii) (b) (Elongation at break of fabric (Width wise)) |
1000.0 |
|
| Table 1, SI. No. (viii) (Drop impact strength) |
2000.0 |
|
| Table 1, SI. No. (ix) (Ash content) |
2000.0 |
|
|
| 240 |
National Test House (ER), Kolkata
| #IS 1786 - HSD Bar (28 -32 mm) |
HSD Bar (28 -32 mm) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.3 (Mass per meter run) |
1000.0 |
|
| Cl 9.2 (Tensile test) |
3500.0 |
|
| Cl.9.3 (Bend test) |
1000.0 |
|
| Cl.9.4 (Rebend test) |
1500.0 |
|
| Cl.8 (Rib area) |
1000.0 |
|
| Cl.8 (TS/YS Ratio) |
500.0 |
|
| Cl.5 (Total Elongation at Maximum Force) |
500.0 |
|
| Cl.4.2 (Chemical analysis without CE) |
2000.0 |
|
| Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE)) |
2500.0 |
|
| Cl.4.2 (Chemical Analysis with Micro Alloys without CE) |
4000.0 |
|
| Cl.4.2 (Chemical Analysis with Micro Alloys & CE / Chemical Analysis including CE) |
4500.0 |
|
| Cl 9.1.3 (Phase Distribution - TM Ring test (Optional)) |
3000.0 |
|
| Cl.5.7 (Pull out test (Fee Ratio 70:30 among Mechanical & Civil)) |
15000.0 |
|
|
