NTH - Management Information System

Search by Standard No.

Reset

4391 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

241

National Test House (ER), Kolkata

#IS 1786n - HSD Bar (12 - 28 mm)

HSD Bar (12 - 28 mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.3 (Mass per meter run)	1000.0
Cl.9.2 (Tensile test)	3000.0
Cl.9.3 (Bend test)	1000.0
Cl.5.7 (Rebend test)	1000.0
Cl.5 (Rib area)	1000.0
Cl.4.2 (Chemical analysis without CE)	2000.0
Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE))	2500.0
Cl.4.2 (Chemical Analysis with Micro Alloys without CE)	4000.0
Cl.4.2 (Chemical Analysis with Micro Alloys & CE / Chemical Analysis including CE)	4500.0
Cl 9.1.3 (Phase Distribution - TM Ring test (Optional))	1000.0
Cl.9.4 (Pull out test (Fee Ratio 70:30 among Mechanical & Civil))	15000.0

242

National Test House (ER), Kolkata

#IS 1786 - HSD Bar (up to 12 mm)

HSD Bar (up to 12 mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.3 (Mass per meter run)	1000.0
Cl.9.2 (Tensile test)	2000.0
Cl.9.3 (Bend test)	1000.0
Cl.9.4 (Rebend test)	1000.0
Cl.8 (TS/YS Ratio)	500.0
Cl.8 (Total Elongation at Maximum Force)	500.0
Cl.5 (Rib area)	1000.0
Cl.4.2 (Chemical analysis without CE)	2000.0
Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE))	2500.0
Cl.4.2 (Chemical Analysis with Micro Alloys without CE)	4000.0
Cl 9.1.3 (Phase Distribution - TM Ring test (Optional))	3000.0
Cl.5.7 (Pull out test (Fee Ratio 70:30 among Mechanical & Civil))	10000.0

243

National Test House (ER), Kolkata

#IS 513 - C.R.Low Carbon Steel

C.R.Low Carbon Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.10 (Visual Examination)	1000.0
Cl.11 (Dimension)	1000.0
Cl.8.1 (Tensile test)	3000.0
Cl. 8.3 (Hardness)	2000.0
Cl. 8.4 (Bend test)	1000.0
Cl. 3 (Chemical Composition)	2000.0
Cl. 8.2 (Cupping test)	2000.0
Cl.8.5 (Plastic Strain Ratio)	3000.0
Cl.8.6 (Tensile Strain Hardening Component)	3000.0
Cl.8.7 (Bake Hardening Index)	3000.0
Cl.9.3 (Strain Ageing)	3000.0
Cl. 9.5 (Surface Finish)	1000.0

244

National Test House (ER), Kolkata

#IS 432 (Part 2) - M.S.Bar & H.D. wire

M.S.Bar & H.D. wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. 4 (Freedom from defects)	1000.0
Cl. 5.1 (Dimensions)	1000.0
Cl. 8.2 (Tensile test)	3000.0
Cl. 8.3 (Reverse bend test)	1000.0
Cl. 3 (Chemical analysis (S,P))	1000.0

245

National Test House (ER), Kolkata

#IS 432 (Part 1) - M.S.Bar & H.D. wire

M.S.Bar & H.D. wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.5 (Freedom from defects)	1000.0
Cl.6 (Dimensions)	1000.0
Cl.6 (Nominal Mass)	1000.0
Cl.9.2 (Tensile test)	3000.0
Cl. 9.3 (Bend test)	1000.0
Cl. 4.2 (Chemical analysis)	2000.0

246

National Test House (ER), Kolkata

#IS 410 - Brass Sheet / Strip

Brass Sheet / Strip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. 8 (Dimensions)	1000.0
Cl. 7.1.3 (Bend test (Cold))	1000.0
Cl. 7.1.2 (Hardness test)	2000.0
Cl. 7.1.1 (Tensile test)	2000.0
Cl. 6 (Chemical analysis)	2000.0
Cl. 7.1.4.1 (Erichsen Cupping Test)	2000.0

247

National Test House (ER), Kolkata

#IS 280 - M.S.Wire

M.S.Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.9.1 (Tensile test)	3000.0
Cl. 6 (Carbon ( as C))	500.0
Cl. 11 (Galvanising)	2000.0
Cl. 7 (Diameter of the wire)	500.0
Cl.13 (Freedom From Defects)	1000.0
Cl. 11 (Zn Coating Test)	2000.0
Cl. 11 (Uniformity of Zn coating)	1000.0
Cl. 9.2 (Wrapping test)	1000.0
Cl. 9.3 (Bend test for wire of dia 5 mm and over)	1000.0

248

National Test House (ER), Kolkata

#IS 210 - Grey Cast Iron

Grey Cast Iron

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.15 (Tensile test )	2500.0
Cl.9 (Microstructure )	2000.0
Cl.10 (Freedom from defect )	1000.0
Cl.17 (Transverse test )	3000.0
Cl.6 (Chemical Test(Optional) )	1200.0
Cl.16 (Hardness test )	2000.0

249

National Test House (ER), Kolkata

#IS 278 - Barbed Wire

Barbed Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.9.1 (Visual Eaxamination )	500.0
Cl.7 (Dimensions )	1000.0
Cl.6 (Chemical analysis )	2000.0
Cl.12.2 (Galvanising )	2000.0
Cl.12.3 (Ducitilty )	1000.0
Cl.12.1 (Tensile test )	2000.0

250

National Test House (ER), Kolkata

#IS 277 - Galvanised Sheet

Galvanised Sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.8.2 (Bend test )	1000.0
Cl.15 (Dimensions)	1000.0
Cl.7 (Mass of Zn coating )	2000.0
Cl.14 (Total coated thickness (As per test request) )	1000.0
Cl.14 (Base Metal Thickness (As per test request) )	1000.0
Cl.6 (Erischen cupping test )	1000.0
Cl.8.1 (Tensile test )	3000.0
Cl.5.1 (Chemical composition )	2500.0
Cl.9 (Surface roughness )	1000.0
Cl.12 (Freedom from Defects )	1000.0

251

National Test House (ER), Kolkata

# IS 2062 part 1 - Carbon steel with Micro Alloying Elements

Carbon steel with Micro Alloying Elements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

252

National Test House (ER), Kolkata

# IS 1786 - HSDS Bar with alloying elements with CE

HSDS Bar with alloying elements with CE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

253

National Test House (NR), Ghaziabad

OPTICAL FIBER CABLE - OPTICAL FIBER CABLE

OPTICAL FIBER CABLE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Marking)	500.0
2 (Description of Optical Fiber Cable)	500.0
3 (Marking on Optical Fiber Cable)	500.0
4 (Construction of Optical Fiber Cable)	500.0
4.1(a) (Nos of Fibers)	1000.0
4.1(b) (Presence of Sheath/Covering in addition to coat on Fiber)	500.0
4.1(c) (Individual Sheathed of Fiber Cable)	8000.0
4.1(d) (Colour of Sheath)	500.0
4.1(e) (Mylar Fiber and Colour)	500.0
4.1(f) (Any other colour of fiber cable)	2000.0
4.1(f) (Any other Detail of fiber cable)	500.0
4.1(g) (Colour of Jacket)	500.0
4.1(h) (Overall Diameter of Jacket)	500.0
El/1 (confirms the plastic material against individual Fiber)	45000.0
WI/2 (FTIR method - Glass Fibers are Individual covered by Plastic or coated)	6000.0

254

National Test House (WR), Mumbai

NTH_CUSTOM/2026/022 - NPCIL SPECIFICATION ON EPOXY COATING FOR REACTOR BUILDING INTERNAL STRUCTURE AND EQUIPMENT

NPCIL SPECIFICATION ON EPOXY COATING FOR REACTOR BUILDING INTERNAL STRUCTURE AND EQUIPMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Fineness of dispersion Hegmann gauge (0.004") with scale 0 to 8)	1200.0
2 (Volume solids (%))	2000.0
3 (Flash point Deg C)	1200.0
4 (Dry Film Thickness/coat in microns)	1200.0
5 (Pot life at 30 deg C)	1500.0
6 (Shelf life at 30 deg C)	1500.0
7 (Drying time in hrs a) Surface Dry)	1200.0
8 (Drying time in hrs b) Hard Dry)	1200.0
9 (Coverage (m²/litre))	1500.0
10 (Total dry film thickness in microns)	1200.0
11 (Colour)	1200.0
12 (Gloss (60 deg.))	1200.0
13 (Salt spray (21 days))	20000.0
14 (Protection against corrosion in humidity cabinet (21 Days))	15000.0
15 (Viscosity (Kinematic) at 25 deg C in stokes by Ford cup No. 4)	1200.0
16 (Scratch Hardness (kg))	1200.0
17 (Rocker hardness)	1500.0
18 (Practical Adhesion by sandwitch pull off technique)	4000.0
19 (Failure in cohesion in body/top coat)	4000.0
20 (Abrasion (Dry) resistance (mg/1000 cycle))	2000.0
21 (Water vapour permeability gm/m² - hr/mil)	5000.0
22 (Resistance to Distilled water - for 4 weeks)	3000.0
23 (Resistance to De ionised water - for 4 weeks)	3000.0
24 (Resistance to 2% Nitric Acid Solution for 4 weeks)	3000.0
25 (Resistance to 5% NaOH solution for 4 weeks)	3000.0
26 (Resistance to 5% detergent (eg. Teepol) for 4 weeks)	3000.0
27 (Resistance to Petrol - for 4 weeks)	4800.0
28 (Resistance to Hot water at 95 deg C - 1 hr for 40 cycles)	3000.0
29 (Accelerated weatherometer (500 hrs) by Fluorescent UV-Condensation Exposures)	20000.0
30 (Tensile Strength Kg/cm² ASTM D 2370)	1000.0
31 (% Elongation under load at the point of break ASTM D 2370 )	1000.0
32 (% Water absorption on free film (07 days) RRL Method Note 2)	2000.0

255

National Test House (SR), Chennai

#IS 277 - Galvanised Sheet

Galvanised Sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.8.2 (Bend test )	1000.0
Cl.15 (Dimensions)	1000.0
Cl.7 (Mass of Zn coating )	2000.0
Cl.14 (Total coated thickness (As per test request) )	1000.0
Cl.14 (Base Metal Thickness (As per test request) )	1000.0
Cl.6 (Erischen cupping test )	1000.0
Cl.8.1 (Tensile test )	3000.0
Cl.5.1 (Chemical composition )	2500.0
Cl.9 (Surface roughness )	1000.0
Cl.12 (Freedom from Defects )	1000.0

256

National Test House (SR), Chennai

#IS 280 - M.S.Wire

M.S.Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.9.1 (Tensile test)	3000.0
Cl. 6 (Carbon ( as C))	500.0
Cl. 11 (Galvanising)	2000.0
Cl. 7 (Diameter of the wire)	500.0
Cl.13 (Freedom From Defects)	1000.0
Cl. 11 (Zn Coating Test)	2000.0
Cl. 11 (Uniformity of Zn coating)	1000.0
Cl. 9.2 (Wrapping test)	1000.0
Cl. 9.3 (Bend test for wire of dia 5 mm and over)	1000.0

257

National Test House (SR), Chennai

#IS 210 - Grey Cast Iron

Grey Cast Iron

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.15 (Tensile test )	2500.0
Cl.9 (Microstructure )	2000.0
Cl.10 (Freedom from defect )	1000.0
Cl.17 (Transverse test )	3000.0
Cl.6 (Chemical Test(Optional) )	1200.0
Cl.16 (Hardness test )	2000.0

258

National Test House (SR), Chennai

#IS 21 - Aluminium

Aluminium

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.8 of IS 737 (Tensile test )	3000.0
Cl.8.2 of IS 737 (Bend test )	1500.0
Cl.7 of IS 737 (Chemical analysis )	5000.0

259

National Test House (SR), Chennai

#IS 2062 (Part 1 & Part 2) - Structural Steel

Structural Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.7 (Visual Examination)	1000.0
Cl.14 (Dimension)	1000.0
Cl.10 (Tensile test)	3000.0
Cl.11 (Bend test)	1000.0
Cl.12 (Impact test (Including & Above 12mm Thick))	5000.0
Cl. 5 ,8.1, 8.2 (Chemical analysis (Without Micro Alloys))	2500.0
Cl. 5 ,8.1, 8.2 (Chemical Analysis as per Part 2 of IS 2062)	7500.0
Cl. 5 ,8.1, 8.2 (Chemical Analysis with micro-alloys)	5000.0
Cl 13 (Weld Crackability Test)	2000.0

260

National Test House (SR), Chennai

#IS 1786 - HSD Bar (28 -32 mm)

HSD Bar (28 -32 mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.3 (Mass per meter run)	1000.0
Cl 9.2 (Tensile test)	3500.0
Cl.9.3 (Bend test)	1000.0
Cl.9.4 (Rebend test)	1500.0
Cl.5.7 (Pull out test (Fee Ratio 70:30 among Mechanical & Civil))	15000.0
Cl.8 (Rib area)	1000.0
Cl.8 (TS/YS Ratio)	500.0
Cl.5 (Total Elongation at Maximum Force)	500.0
Cl.4.2 (Chemical analysis without CE)	2000.0
Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE))	2500.0
Cl.4.2 (Chemical Analysis with Micro Alloys without CE)	4000.0
Cl.4.2 (Chemical Analysis with Micro Alloys & CE / Chemical Analysis including CE)	4500.0
Cl 9.1.3 (Phase Distribution - TM Ring test (Optional))	3000.0

261

National Test House (SR), Chennai

#IS 1786n - HSD Bar (12 - 28 mm)

HSD Bar (12 - 28 mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.3 (Mass per meter run)	1000.0
Cl.9.2 (Tensile test)	3000.0
Cl.9.3 (Bend test)	1000.0
Cl.9.4 (Pull out test (Fee Ratio 70:30 among Mechanical & Civil))	15000.0
Cl.5.7 (Rebend test)	1000.0
Cl.8 ()	500.0
Cl.8 ()	500.0
Cl.5 (Rib area)	1000.0
Cl.4.2 (Chemical analysis without CE)	2000.0
Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE))	2500.0
Cl.4.2 (Chemical Analysis with Micro Alloys without CE)	4000.0
Cl.4.2 (Chemical Analysis with Micro Alloys & CE / Chemical Analysis including CE)	4500.0
Cl 9.1.3 (Phase Distribution - TM Ring test (Optional))	1000.0

262

National Test House (SR), Chennai

#IS 1786 - HSD Bar (up to 12 mm)

HSD Bar (up to 12 mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.3 (Mass per meter run)	1000.0
Cl.9.2 (Tensile test)	2000.0
Cl.9.3 (Bend test)	1000.0
Cl.9.4 (Rebend test)	1000.0
Cl.5.7 (Pull out test (Fee Ratio 70:30 among Mechanical & Civil))	10000.0
Cl.8 (TS/YS Ratio)	500.0
Cl.8 (Total Elongation at Maximum Force)	500.0
Cl.5 (Rib area)	1000.0
Cl.4.2 (Chemical analysis without CE)	2000.0
Cl.4.2 (HSDS Bar (C, S, P, & S+P, CE))	2500.0
Cl.4.2 (Chemical Analysis with Micro Alloys without CE)	4000.0
Cl 9.1.3 (Phase Distribution - TM Ring test (Optional))	3000.0
Cl.4.2 (Chemical Analysis with Micro Alloys without CE)	4000.0
Cl 9.1.3 (Phase Distribution - TM Ring test (Optional))	3000.0

263

National Test House (WR), Mumbai

IS 398 Part 2 (2025) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Mechanical Test As per Annexure)	6000.0
0 (Resistance Test)	1000.0
13.6 (Resistance Test Clause 13.6 (Table 1))	2000.0
Annexure A-3 & Table 3 (Approximate breaking load of conductors)	2000.0
3.3 (Measurement of Diameter of individual Aluminum Wires)	3500.0

264

National Test House (WR), Mumbai

IS 398 : Part 1 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

265

National Test House (WR), Mumbai

IS 398 : Part 2 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (ACSR Conductor Acceptance & Type Tests)	34000.0
0 (ACSR Conductor Acceptance Tests)	14000.0
0 (ACSR Conductor Type Tests)	20000.0

266

National Test House (WR), Mumbai

NTH_CUSTOM/2026/021 - Custom standard (NTH WR) Chemical

Custom standard (NTH WR) Chemical

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (As refer Annexure)	40500.0

267

National Test House (NER), Guwahati

IS 7098 : Part 2 (2011) - Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
19.2.(k) (Volume resistivity at 90 Degree C-B)	1000.0
19.2.(k) (Volume resistivity at 90 Degree C-Y)	1000.0
19.2.(k) (Volume resistivity at 90 Degree C-R)	1000.0
19.2.(k) (Volume resistivity at ambient temperature (27 degree C +/- 2 degree C )-Black)	1000.0
19.2.(k) (Volume resistivity at ambient temperature (27 degree C +/- 2 degree C )-B)	1000.0
19.2.(k) (Volume resistivity at ambient temperature (27 degree C +/- 2 degree C )-Y)	1000.0
19.2.(k) (Volume resistivity at ambient temperature (27 degree C +/- 2 degree C )-R)	1000.0
19.2.(k) (Volume resistivity at 90 Degree C-Black)	1000.0

268

National Test House (ER), Kolkata

IS 6603 (2024) - Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Freedom From Defects - Visual Examination as per IS 6603 Cl.6.1 & 6.2)	1000.0
7 (Chemical Composition-The ladle analysis of steel, when carried out either by the methods specified in relevant parts of IS 228 or any other established international instrumental/chemical method)	5000.0
9.0 Mechancial Properites (The tensile test ( Tensile Stregth, 0.2% Proof/Yield Stress, % of Elongation ) shall be carried out in accordance with IS 1608 (Part 1))	3000.0
9.0 Mechnaical Properties (The tensile properties at elevated temperature mentioned in Table 10 to Table 14 The tensile test ( Tensile Stregth, 0.2% Proof/Yield Stress, % of Elongation ) shall be carried out in accordance with IS 1608 (Part 2))	5000.0
9.0 Mechancial Properties (Hardness shall be determined in accordance with IS 1500 (Part 1), IS 1501 (Part 1) or IS 1586 (Part 1).)	2000.0
9.0 Mechanical Properties (Charpy impact test shall be carried out in accordance with IS 1757 (Part 1).)	5000.0
12 (Dimesnion Measurment in mm dimensional tolerances for the bars and flats shall be as laid down in Table 26 to Table 36 given at Annex C of IS 6603)	1000.0

269

National Test House (ER), Kolkata

# IS 17876 (2022) - Stainless Steel Welded Pipes and Tubes for General Services

Stainless Steel Welded Pipes and Tubes for General Services

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 8 (Chemical composition)	5000.0
Cl 10.1 (Yield strength)	1000.0
Cl 10.1 (Tensile strength)	1000.0
Cl 10.1 (% Elongation)	1000.0
- (Weight per meter)	1000.0

270

National Test House (ER), Kolkata

# IS 6911 - SS,Plate, Sheet / Strip

SS,Plate, Sheet / Strip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Visual)	1000.0
15 (Surface Finish)	1000.0
10.2 (Hardness)	2000.0
17 (Dimensions)	1000.0
10.3 (Bend test)	1000.0
10.1 (Tensile test)	3000.0
Cl 7.1 & 7.2 (Chemical analysis)	5000.0