NTH - Management Information System

Search by Standard No.

Reset

4011 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

181

National Test House (WR), Mumbai

IS 4270 (2001) - Steel tubes used for water wells specification (Third Revision)

Steel tubes used for water wells specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Chemical analysis)	2500.0
9 (Outside diameter)	3000.0
6.2 (Flattening)	1000.0
6.1 (Tensile test)	3000.0
7 (Weight in kg/m)	1000.0
7 (Length)	250.0
7 (Thickness)	250.0
7 (Outside diameter)	250.0
14 (Visual examination)	1000.0
5.2 (Sulphur)	1250.0
6.2 (Flattening Test)	1500.0
6.1 (% Elongation)	1000.0
6.1 (Tensile Strength)	1000.0
6.1 (Yield Strength)	1000.0
7 (Thickness)	1000.0
14 (Workmanship)	1000.0
5.2 (Phosphorus)	1250.0

182

National Test House (WR), Mumbai

BS EN 12467 (2012) - Fibre - cement flat sheets - Product specification and test method.

Fibre - cement flat sheets - Product specification and test method.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3.2 (Nominal Length, in mm)	500.0
5.3.2 (Nominal Width, mm)	500.0
5.3.3 (Thickness, in mm)	1000.0
5.3.4.1 (Tolerance on length, in mm)	500.0
5.3.4.1 (Tolerance in Width, in mm)	500.0
5.3.4.2 (Tolerance on thickness, in mm or %)	500.0
5.3.5.1 (Straightness of Edges, in %)	500.0
5.3.5.2 (Squareness of edges, in mm/m)	500.0
5.4.2 (Apparent Density)	1000.0
5.4.3 (Moisture Movement, in %)	2000.0
5.4.4 (Bending Strength (MOR) in Ambient Laboratory condition, in MPa.)	4000.0
5.4.4 (Bending Strength (MoR) in Wet Condition, MPa)	8000.0
5.4.5 (Water Impermeability,)	4000.0
5.5.2 (Freeze Thaw Test)	25000.0
5.5.4 (Warm Water Durability test)	25000.0
5.5.5 (Soak Dry Durability Test)	25000.0

183

National Test House (NER), Guwahati

IS 398 : Part 2 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12 (Seal, Packing & Markings (7/30/54 wire construction))	-
10 (Construction (7/30/54 wire construction))	-
13.2 (Measurement of diameter of individual Aluminium wires (7 wire construction))	1000.0
13.2(1) (Diameter of individual steel wires (7 wire construction))	1000.0
13.6 (Resistance of Aluminium wire (7 wire construction))	5000.0
13.8 (Measurement of lay ratio(7 wire construction))	2000.0
13.5 (Wrapping test on Aluminium and Steel wires (7 wire construction))	1000.0
13.6 (Resistance Test as per Clause 13.6 (Table 1) in Ohms/km)	3000.0
13.7(1) (Galvanizing test-Mass of zinc coating(7wire construction))	2000.0
13.3(1) (Breaking load of individual steel wires(30 or 54 wire construction))	1500.0
13.3.1 (Approximate calculated breaking load (7 wire construction))	-
13.4.2 (Ductility test-Elongation test on steel wires (7 Wire construction))	3500.0
13.3 (Breaking load of individual Aluminium wires (7 wire construction))	3500.0

184

National Test House (SR), Chennai

Bus Shelter SS Twin Bin (2025) - Bus Shelter SS Twin Bin

Bus Shelter SS Twin Bin

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimension, Construction and Volume - SS Bin)	5000.0
2.0 (LLDPE Material Identification, Dimension, Volume, Density and Melt Flow Rate of Plastic Bin.)	7000.0

185

National Test House (ER), Kolkata

IRC 116-2014 - SPECIFICATIONS FOR READYMADE BITUMINOUS POTHOLE PATCHING MIX USING CUT-BACK BITUMEN

SPECIFICATIONS FOR READYMADE BITUMINOUS POTHOLE PATCHING MIX USING CUT-BACK BITUMEN

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Wet Coating Test)	1000.0
3.1 (Static-Immersion Test)	1000.0
3.1 (Water Resistance Test)	1000.0
6 (Workability Test)	1000.0

186

National Test House (ER), Kolkata

IS 12406 (2021) - Medium density fibre boards for general purpose - Specification (First Revision)

Medium density fibre boards for general purpose - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9, Table 3 and 4, Sl No (x) (Screw Withdrawal Strength-IS 2380 (Part 14): 1977)	1500.0
9, Table 3 and 4, Sl No (vii) (Internal Bond strength after cyclic/accelerated water resistance test-IS 12406:2021 & IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (vi) (Internal Bond Strength-IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (viii) (Modulus of Rupture -IS 2380 (Part 4): 1977)	2500.0
9, Table 3 and 4, Sl No (ix) (Modulus of Elasticity-IS 2380 (Part 4): 1977)	2000.0
9, Table 3 and 4, Sl. No. (v) (Linear Expansion (thickness swelling of water) due to general absorption after 24 hr soaking -IS 2380 (Part17): 1977)	1000.0
9, Table 3 and 4, Sl No (xi) (Formaldehyde content-IS 13745:1993.)	3000.0
9, Table 3 and 4, Table 3 & 4, Sl. No. (iii) & (iv) (Moisture Content-IS 2380 (Part 3): 1977)	1000.0
9, Table 3 & 4, Sl. No. (i) & (ii) (Density-IS 2380 (Part 3): 1977)	500.0
8, Table 2 (Dimension & Tolerances-IS 12406:2021, Annex A)	500.0
7 (Finish-IS 12406:2021)	1000.0

187

National Test House (WR), Mumbai

Custom - Concrete - Custom Physical Tests on hardened Concrete

Custom Physical Tests on hardened Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- - (Compressive Strength , MPa)	1200.0
- - (Water Absorption)	1000.0
- - (Water Absorption after 24 hours)	1000.0
- - (Density of concrete)	1000.0

188

National Test House (ER), Kolkata

IS 6615 (2021) - GENERAL PURPOSE PACKING/WRAPPING PAPER — SPECIFICATION

GENERAL PURPOSE PACKING/WRAPPING PAPER — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (General)	1000.0
4.2 (Grammage)	1000.0
4.3, Table 1, (i) (Burst index)	2000.0
4.3, Table 1, (ii) (Tear index, MD)	1000.0
4.3, Table 1, (ii) (Tear index, CD)	1000.0
4.3, Table 1, (iii) (Tensile index, MD)	2000.0
4.3, Table 1, (iv) (Moisture content)	1000.0
4.3, Table 1, (v) (Cobb, Top side)	1000.0
4.3, Table 1, (v) (Cobb, Bottom side)	1000.0

189

National Test House (ER), Kolkata

IS 3885 Part 1 (1992 (RA 2001)) - STEEL FOR THE MANUFACTURE OF LAMINATED SPRINGS (RAILWAY ROLLING STOCK) FLAT SECTIONS

STEEL FOR THE MANUFACTURE OF LAMINATED SPRINGS (RAILWAY ROLLING STOCK) FLAT SECTIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Chemical Analysis as per IS 3885(Part 1))	3000.0
7 (Brinell Hardness as per IS 1500 Part 1)	2000.0
8 (Decarburization)	3000.0
9 (Inclusion Rating)	3000.0

190

National Test House (WR), Mumbai

NTH/WR/RPPT/Inspection of Paper - NTH/WR/RPPT/Inspection of Paper

NTH/WR/RPPT/Inspection of Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Paper Inspection Report)	30798.0

191

National Test House (WR), Mumbai

NTH/WR/RPPT/2025/Inspection of papers - Inspection of Papers [-]

Inspection of Papers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Firms requirements)	115000.0

192

National Test House (WR), Mumbai

NTH/NR/RPPT/Paper Inspection (2024) - Inspection of Papers

Inspection of Papers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirements (Inspection Report)	172125.0

193

National Test House (SR), Chennai

Custom/NTH(SR)/RPPT/CSD - Custom specification

Custom specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Test results - Rupa Thermo cot Agni Agents TR.O.E 90 cm Index No 45060)	5000.0
2.0 (Test Results - Rupa Thermo cot Agni agents R/N F/S 85 cm Index no - 45062)	14500.0
3.0 (Test Results - Dollar Bigboss Brieff T/E 100 cm Index no 41632)	14500.0
4.0 (Test Results - S.I. enterprises flora foam bra 36 inch colors white, black, skin pack of 3 pcs Index no 38002)	4000.0
5.0 (Test results - S.I. enterprises flora foam bra 36 inch colors red, maroon, navy pack of 3 pcs Index no 38003)	4000.0
6.0 (Test results - Lavie Sport - Prodigy NV - Laptop Back Pack Black Index no 38248)	4000.0
7.0 (Test results - Lavie Sport - Prodigy NV - Laptop Back Pack Navy Index no 38249)	4000.0

194

National Test House (SR), Chennai

IS 5084 (1990) - Socks, nylon – Specification (first revision)

Socks, nylon – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 & 6 (Test Results)	15000.0

195

National Test House (WR), Mumbai

Custom - Cement Sand mix. - Cement - Sand Mix. [- -]

Cement - Sand Mix.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
-- (Sand Content and cement content, %)	3000.0
- - (Visual Examination)	2000.0
- - (Physical Properties)	2000.0
- - (Chemical composition of cement)	5000.0

196

National Test House (WR), Mumbai

Custom (0) - Cement Sand ratio

Cement Sand ratio

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Cement sand ratio)	5000.0

197

National Test House (WR), Mumbai

IS 2347 (2023) - Domestic pressure cooker - Specification (Sixth Revision)

Domestic pressure cooker - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Capacity)	500.0
6.1.1 (Vent pipe inside diameter)	500.0
8.1 (Air Pressure of domestic pressure cooker)	1000.0
8.2 (Proof Pressure of domestic pressure cooker)	2000.0
8.3 (Operating pressure for Pressure Regulating Device)	1000.0
8.4.1 Annex-H cl. No. H-1.1 (Operating pressure of Safety Pressure Relief Device for destructible device)	1000.0
8.6.1 (Removal of Lid under Pressure (For Outer Lid Cooker))	1000.0
8.6.2 (Removal of Lid under Pressure (For Inner Lid Cooker))	1000.0
8.5 (Bursting Pressure Test)	3000.0
5.3 (Performance Test on Gasket)	1000.0
7.4 Annex-E cl. No. E-2 (Coating thickness for body)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for body)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for body)	2000.0
8.9 (Test for Induction Bottom)	5000.0
TDS 1 (Weight, kg.)	-
5.1 (Chemical Composition, % by mass.)	6000.0
TDS-2 (Overall Dimension- Thickness, mm.)	-
7.4 Annex-E cl. No. E-2 (Coating thickness for lid)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for lid)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for lid)	2000.0
5.4 (Performance test for pressure cooker handle as per IS 13395)	11000.0
0 (Test Result as per Annexure.)	20000.0
8.4.1 Annex-H cl. No. H-1.2 (Operating pressure of Safety Pressure Relief Device for Gasket Release System.)	1000.0
0 (CSD - Pressure Cooker -All Possible Test as per TDS and IS 2347)	5000.0

198

National Test House (ER), Kolkata

IS 5273 (1969) - Specificaiton for radius gauges

Specificaiton for radius gauges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Dimension- Radius (0.5mm))	-
4.2 (Dimension-Radius (0.6mm to 7mm))	3000.0
4.2 (Dimension-Radius (Above 7mm))	3000.0

199

National Test House (ER), Kolkata

IS 15388 (2003) - Specification for Silica Fume

Specification for Silica Fume

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 [Table 2 (ii)] (Oversize percent retained on 45 micron IS sieve,)	1000.0
5 [Table 2 (iv)] (Compressive Strength at 7 days as percent of control sample,)	3000.0
4 (Alkalies as Na2O)	1200.0
4 (Loss in Ignition)	1200.0
4 (Moisture)	1200.0
4 (Silica)	1200.0

200

National Test House (NR), Ghaziabad

IS 15853 (2009) - Textiles – Polyester blended woven suiting for uniforms

Textiles – Polyester blended woven suiting for uniforms

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Mass)	2000.0
4.1 (Blend Composition)	2000.0
4.1 (Threads/dm (Warp))	2000.0
4.1 (Threads/dm (Weft))	2000.0
4.1 (Breaking Strength on 5 cm x 20 cm strip (Warp))	2000.0
4.1 (Breaking Strength on 5 cm x 20 cm (Weft))	2000.0
4.1 (Nominal count)	2000.0
4.1 (Length)	500.0
4.1 (Width)	500.0
4.1 (Tear Strength)	2000.0
4.1 (pH Value of aqueous extract (Hot method))	1000.0
4.1 (Colour fastness to Rubbing)	2000.0
4.1 (Colour fastness to washing)	4000.0

201

National Test House (ER), Alipore

IS 15965: 2012 - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

202

National Test House (SR), Chennai

IS 868 (1990) - Sealing wax - Specification (First Revision)

Sealing wax - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Test Results)	5000.0
5.0 (Adhesion & Impression Test (Without Bending & keeping for15-days Test))	1500.0

203

National Test House (WR), Mumbai

IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS "

"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS "

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Type tests)	20000.0
10.2 (Acceptance tests)	10000.0

204

National Test House (WR), Mumbai

14255 (1995) - Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

205

National Test House (NR), Ghaziabad

Custom spec Flammability & Heavy metals - Custom spec Flammability & Heavy metals

Custom spec Flammability & Heavy metals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Flammability test)	3000.0
2 (Please see Annexure for Heavy metals)	5000.0

206

National Test House (ER), Kolkata

IS 15997 (2012) - Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Copper)	500.0
8 (Phosphorus)	500.0
8 (Sulphur)	500.0
8 (Chromium)	500.0
8 (Nickel)	500.0
8 (Manganese)	500.0
8 (Silicon)	500.0
8 (Carbon)	500.0
6 (Freedom from Defects)	1000.0
9.2 (Tensile Strength)	1000.0
9.2 (0.2 Percent Yield Strength)	1000.0
9.2 (Percentage Elongation)	1000.0
9.4 (Erichsen Cupping Test (for thickness from 0.20 to 1.25 mm))	3000.0
12 (Dimensions)	1000.0

207

National Test House (ER), Alipore

ND CUSTOM 12 (2025) - Custom Specification for Steel Plate , Quard 450

Custom Specification for Steel Plate , Quard 450

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ultrasonic Testing)	3000.0
2 (Material Hardness)	2000.0

208

National Test House (SR), Chennai

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Carbon)	500.0
4.3 (Sulphur)	500.0
4.3 (Silicon)	500.0
4.3 (Manganese)	500.0
4.3 (Chromium)	500.0
4.3 (Nickel)	500.0
4.3 (Molybdenum)	500.0
4.3 (Copper)	500.0
9.3 (Bend Test)	1000.0
5.2 (Rib Area)	1000.0
7.2 (Nominal Mass per meter Run)	1000.0
9.4 (Rebend Test (Upto 25 mm))	1000.0
8.6 (Charpy Impact Test at Room Temperature)	5000.0
9.2 (0.2 % Proof Stress / Yield Stress)	1000.0
9.2 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area)	500.0
9.2 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Crosss- Sectional Area,)	500.0
9.2 (Tensile Strength (up to 12 mm),)	500.0
9.2 (Tensile Strength (16 to 25 mm))	1000.0
9.2 (Tensile Strength (32 mm))	1500.0
9.4 (Rebend Test (32 mm))	1500.0
5.7 (Compressive strength of concrete cubes (Avg) after 28 days for 16 to 40 mm)	5250.0
5.7 (M_Pull out test for 16 to 40 mm)	9750.0
4.3 (Phosphorus)	500.0
5.7 (M_Pull out test for 0 to 12 mm)	6500.0
5.7 (Compressive strength of concrete cubes (Avg) after 28 days for 0 to 12 mm)	3500.0

209

National Test House (WR), Mumbai

IS 10322 : PART 5 : SEC 3 (2012) - Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Provision for earthing)	1200.0
12 (Protection against Electric Shock)	1200.0

210

National Test House (WR), Mumbai

IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass)	3000.0
5.1.1 b Chemical composition (Copper (as Cu)content,% by mass)	500.0
5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass)	500.0
5.1.1 d Chemical composition (Silicon (as Si) content,% by mass)	500.0
5.1.1 e Chemical composition (Iron (as Fe) content,% by mass)	500.0
5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass)	500.0
5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass)	500.0
5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass)	500.0
5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass)	500.0
5.1.1 j Chemical composition (Vanadium (as V) content,% by mass)	500.0
7 (Dimension)	1000.0
9.1 (Tensile Strenth)	2000.0
9.1 (0.2% Proof Stress)	1000.0
9.1 (Elongation)	1000.0
5 (Chemical composition, % by mass)	6000.0
0 (Anodic Coating)	2000.0
0 (Weight, kg)	1000.0

First
Prev
6
7
8
9
Next
Last