NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2101

National Test House (NR), Ghaziabad

IS-9537(Part-II)-1981 Reaff. 2017 - Conduits for Electrical Installations- Rigid Steel Conduits

Conduits for Electrical Installations- Rigid Steel Conduits

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2102

National Test House (NR), Ghaziabad

IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Dimensions)	1000.0
7.4 (Uniformity of Thickness)	1000.0
8 (Construction)	1000.0
9.2 (Bending Test)	2000.0
9.3 (Compression Test)	2000.0
9.4 (Impact Test)	2000.0
9.5 (Collapse Test)	2000.0
11 (Resistance to Burning)	2000.0

2103

National Test House (NR), Ghaziabad

WD-01-HLS-94(Rev-03) (Amdt. No.4 of Oct 2020 Para No: 2.4) - Metallurgical Test of Spring Steel

Metallurgical Test of Spring Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Chemical Composition As per IS 3195)	4500.0
- (Metallurgical Test)	23500.0

2104

National Test House (NWR), Jaipur

IS 13095 (2020) - Butterfly Valves for General Purposes ( First Revision )

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17.1 (Performance Test)	5000.0
17.2 (Hydrostatic Test of Body)	2500.0
17.3 (Hydrostatic Test of Seat)	2500.0

2105

National Test House (NR), Ghaziabad

IS 16172 (2023) - Reinforcement couplers for mechanical splices of bars in concrete - Specification

Reinforcement couplers for mechanical splices of bars in concrete - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Tensile Strength as per IS 1608(Part 1):2022)	1500.0
9.2 (Percentage Elongation as per IS 1608(Part 1):2022)	1500.0
9.2 (Visual Observation for Nature & Location of failure of spliced specimen (With Coupling).)	1000.0
8 (Chemical composition, % by mass)	3000.0

2106

National Test House (ER), Kolkata

NTH ER PAINT CUS SPECIFICATION 2023 (2023) - NTH ER PAINT CUS SPECIFICATION 2023 (Anti-Carbonation

NTH ER PAINT CUS SPECIFICATION 2023 (Anti-Carbonation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (As per Customer Requirement)	12000.0

2107

National Test House (ER), Kolkata

Custom - Wood Pellets

Wood Pellets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Total Moisture)	1200.0
2 (Ash content)	1200.0
3 (Volatile matter)	1200.0
4 (Fixed Carbon)	1200.0
5 (Gross Calorific value)	2000.0
6 (Sodium + Potassium)	1200.0
7 (Cadmium)	1200.0
8 (Chromium)	1200.0
9 (Copper)	1200.0
10 (Lead)	1200.0
11 (Nickel)	1200.0
12 (Zinc)	1200.0

2108

National Test House (WR), Mumbai

Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification

Test as per Manufacturer/Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test as per Manufacture / Customer Specification)	25000.0
17 (LSZH Property)	20000.0

2109

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR EPOXY BASED ZINC RICH PRIMER (TWO PACK)

SPECIFICATION FOR EPOXY BASED ZINC RICH PRIMER (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Weight per epoxy equivalent on non-volatile vehicle content basis, (CL. 4 of IS 9162-79))	3000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max C) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Consistency (IS 101 (Part 1/Sec 5)-89)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4)))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Colour (IS 101 (Part 4/Sec 2)))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Dry Film Thickness per coat, min. a) By Brush (IS 101 (Part 3/Sec 2)-89 By Elecometer)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Volume Solid % min (Appendix-I))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Scratch hardness, (Load 1000 g), clause 3 of (IS 101 (Part 5/Sec 2))-88)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flexibility and adhesion (6.25mm mandrel), (IS 101 (Part 5/Sec 2))-88)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point (a) Component A (IS 101 (Part 1/Sec 6)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point, (b) Component B (IS 101 (Part 1/Sec 6)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Resistance to salt spray, for 1000 hrs (IS 101 (Part 6/Sec 1)-88)	40000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Protection against corrosion under condition of condensation, for 1000 hrs (IS 101 (Part 6/Sec 1)-88)	30000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties for Pack A, 18 Months (IS 101 (Part 6/Sec 2)-89)	7000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties for Pack B, 18 Months (IS 101 (Part 6/Sec 2)-89)	7000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life b) at 40 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Theoretical Spreading Capacity, min (with 10% Thinner), Appendix-I)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Fineness of grind, min (IS 101 (Part 3/Sec. 5)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Viscosity (Efflux time by ford cup No. 4 of paint i.e. mixture of two components at 27(+/-2 deg C) (with 10% Thinner))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Please Refer Annexure)	1.0
- (Resistance to Pull of adhesion test, (ASTM D 4541))	2000.0
- (Abrasion resistance test, 1.0 Kg Load, CS-17 Wheel, 1000 cycle (ASTM D 4060))	3000.0

2110

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR FULL GLOSS POLYSILOXANE BASED ENAMEL (TWO PACK)

SPECIFICATION FOR FULL GLOSS POLYSILOXANE BASED ENAMEL (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max C) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Consistency (IS 101 (Part 1/Sec 5))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Colour (IS 101 (Part 4/Sec 2)))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Dry Film Thickness per coat, minimum (IS 101 (Part 3/Sec 2)-89 By Elcometer)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Volume Solid % min (Appendix-I))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Scratch hardness, (Load 1.5 kg), clause 3 of (IS 101 (Part 5/Sec 2))-88)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flexibility and Adhesion (6.25 mm mandrel), (IS 101 (Part 5/Sec 2))-88)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point a) Component A (IS 101 (Part 1/Sec 6)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point Component B (IS 101 (Part 1/Sec 6)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Fineness of grind, Max (IS 101 (Part 3/Sec. 5)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 40 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Gloss value at 60 Deg angle of incidence, Minimum (IS 101 (Part 4/Sec 4)-88))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties, 18 Months (Appendix-III))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Theoretical Spreading rate, min, Appendix-I)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27 (+/-2 Deg.C.) in supply condition (IS 101 (Part 1/Sec.5)))	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests a) Resistance to 30% Sulphuric acid (wt by vol) for 24 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests b) Resistance to 20% caustic potash (wt by vol) for 24 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests c) Resistance to oil for 2 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests d) Resistance to Solvent for 3 hours (Appendix-V))	1500.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests e) Resistance to Water for 240 hours (Appendix-V))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Durability Tests Accelerated Weathering test, for 1000 hours (Weather-o-meter, Xenon Arc Lamp) (Appendix-VI))	60000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Humidity Tests (on full system) for 4000 hrs (IS 101 (Part 6/Sec 1))	120000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (% Silicone on non-volatile binder basis, (min) (ASTM D 297 & Appendix-VIII)	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Abrasion resistance test with 1.0 kg load & CS-17 Wheels, 1000 cycles, (ASTM D 4060))	3000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Adhesion & Compatibility test on full system (ASTM D 3359 & Appendix-VII))	2000.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Please refer annexure)	1.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4) -1987))	1200.0
Appendix-VI Durability test (Durability tests Accelerated weathering test, 750 hrs (ASTM G 53, 4 hrs UV and 4 hrs condensation))	45000.0

2111

National Test House (ER), Kolkata

IS : 2720 ( Part XXVII ) - 1977 - METHODS OF TEST FOR SOILS: PART (XXVII) DETERMINATION OF TOTAL SOLUBLE SULPHATES

METHODS OF TEST FOR SOILS: PART (XXVII) DETERMINATION OF TOTAL SOLUBLE SULPHATES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Total Soluble sulphate)	2000.0

2112

National Test House (ER), Kolkata

7514 (2020) - Grease, Low Temperature ―Specification

Grease, Low Temperature ―Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drop point,)	1200.0
5 (Water content,)	1200.0
6 (Copper strip, corrosion at 25 ºC, 24 h)	1200.0
7 (Oil separation, percent by mass, 168 hrs, Max)	1200.0
11 (Consistency of worked grease at 25.0 ± 0.5ºC (60 double strokes))	1200.0

2113

National Test House (ER), Kolkata

IS 7514 (2020) - Grease, Low Temperature ? Specification ( Second Revision )

Grease, Low Temperature ? Specification ( Second Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2114

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - Specification for Epoxy Based Micaceous Iron Oxide (Two-Pack) (Chapter-IV)

Specification for Epoxy Based Micaceous Iron Oxide (Two-Pack) (Chapter-IV)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4 (Weight per Epoxy Equivalent on Non-volatile vehicle content basis (IS 9162-79))	3500.0
3.5a (Pigment content (3.5a) (IS 101 (Part 8/Sec. 2)-90)	2000.0
Table No. II (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86)	1200.0
Table No. II (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86)	1200.0
Table No. II (Drying time, Max c) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86)	1500.0
Table No. II (Consistency (IS 101 (Part 1/Sec 5)-89)	1200.0
Table No. II (Colour (IS 101 (Part 4/Sec 2)))	1200.0
Table No. II (Dry Film Thickness per coat, min. a) By Brush (IS 101 (Part 3/Sec 2)-89)	1200.0
Table No. II (Dry Film Thickness per coat, min. a) By airless spray (IS 101 (Part 3/Sec 2)-89)	1200.0
Table No. II (Volume Solid % min (Appendix-I))	2000.0
Table No. II (Scratch hardness, (Load 1.5 kg), (IS 101 (Part 5/Sec 2))-88)	1200.0
Table No. II (Flexibility and adhesion (IS 101 (Part 5/Sec 2))-88)	1200.0
Table No.II (Flash Point for both packs (IS 101 (Part 1/Sec 6)-87)	1200.0
Table No. II (Resistance to salt spray for 1000 hrs (IS 101 (Part 6/Sec 1)-88)	40000.0
Table No. II (Protection against corrosion under condition of condensation for 1000 hrs (IS 101 (Part 6/Sec 1)-88)	30000.0
Table No. II (Keeping Properties for Pack A, 18 Months (IS 101 (Part 6/Sec 2)-89)	7000.0
Table No. II (Keeping Properties for Pack B, 18 Months (IS 101 (Part 6/Sec 2)-89)	7000.0
Table No. II (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
Table No. II (Pot life a) at 40 (+/- 2 Deg. C), Minimum (Appendix-II))	1500.0
Table No. II (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87)	1200.0
Table No. II (Theoretical Coverage, Minimum (Appendix-I))	1200.0
Table No. II (Adhesion and compatibility with primer and finish coat (ASTM D 3359-97 & Appendix-II))	2000.0
Table No. II (Fineness of grind, minimum (IS 101 (Part 1/Sec. 7)-87)	1200.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Please refer Annexure)	1.0
RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4)-1987))	1200.0
3.5b (Pigment content: (3.5b))	2000.0

2115

National Test House (ER), Kolkata

IS 12766 (1997) - Paper, computer - Specification (First Revision)

Paper, computer - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Grammage (Sustance))	1000.0
4.6 (Table 1) (Bulk)	1000.0
4.6 (Table 1) (Moisture Content)	1000.0
4.6 (Table 1) (Ash)	2000.0
4.6 (Table 1) (Tensile index)	2000.0
4.6 (Table 1) (Burst index)	2000.0
4.6 (Table 1) (Tear index)	2000.0
4.6 (Table 1) (Cobb Test)	1000.0
4.6 (Table 1) (Opacity)	2000.0
4.6 (Table 1) (Brightness)	2000.0
4.6 (Table 1) (Smoothness)	1000.0

2116

National Test House (ER), Kolkata

Custom-28-ER-LM - Impact Test

Impact Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Impact Test)	85000.0

2117

National Test House (ER), Kolkata

IS 280 (2006) - Mild steel wire for general engineering purposes (Fourth Revision)

Mild steel wire for general engineering purposes (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Wrapping Test)	1000.0
9.1 (Tensile Strength)	3000.0
6 (Chemical Composition (Carbon))	625.0
6 (Chemical Composition (Manganese))	625.0
6 (Chemical Composition (Sulphur))	625.0
6 (Chemical Composition (Phosphorus))	625.0
0 (Mass of Zinc Coating)	2000.0
0 (Uniformity of Coating)	1000.0
0 (Coating Thickness)	2000.0
0 (Weight)	1000.0
0 (Tensile Strength of Wire)	1000.0
7.1 (Wire Diameter)	1000.0
7.1 (Wire Diameter)	1000.0
13 (Freedom From Defects)	1000.0

2118

National Test House (SR), Chennai

NTH/WI/MC (on the lines of IS 4169) 11 (2014) - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Force (above 1000 kN to 2000 kN) and deflection measurement calibration)	25000.0

2119

National Test House (ER), Kolkata

EN 10248-1 (1995) - Hot-rolled steel sheet piles - Part 1: Technical delivery conditions

Hot-rolled steel sheet piles - Part 1: Technical delivery conditions

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Mass)	2000.0
7.3 (Carbon)	500.0
7.3 (Manganese)	500.0
7.3 (Sulphur)	500.0
7.3 (Phosphorus)	500.0
7.3 (Silicon)	500.0
7.3 (Nitrogen)	500.0
7.4 (Yield Strength)	1000.0
7.4 (Tensile Strength)	1000.0
7.4 (Elongation)	1000.0
8.7 (Dimensions)	3000.0

2120

National Test House (NER), Guwahati

IS 9755 (2021) - Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Visual Inspection Test)	500.0
Table-1 (Mass of Sack)	500.0
Table-1 (Ends/dm)	500.0
Table-1 (Picks/dm)	500.0
Table-1 (Breaking Strength (Lengthwise))	750.0
Table-1 (Breaking Strength (Widthwise))	750.0
Table-1 (Elongation@break of fabric (Lengthwise))	750.0
Table-1 (Elongation@break of fabric (Widthwise))	750.0
Table-1 (Breaking Strength of bottom seam)	1000.0
Table-1 (Inside Length)	1000.0
Table-1 (Inside width)	1000.0
Table-1 (Mass of Fabric)	1000.0
Table-1 (Ash Content)	2000.0

2121

National Test House (NR), Ghaziabad

NTH/NR/RPPT/Polycarbonate Sheet - Customized specification for Polycarbonate Sheet

Customized specification for Polycarbonate Sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Length)	500.0
Firm's Requirement (Width)	500.0
Firm's Requirement (Thickness)	1000.0
Firm's Requirement (Melt Flow Index)	2000.0
Firm's Requirement (Luminous Transmittance)	2000.0
Firm's Requirement (Density)	1000.0
Firm's Requirement (Tensile Strength at Yield)	1000.0
Firm's Requirement (Tensile Modulus)	1000.0
Firm's Requirement (Flexural Strength)	2000.0
Firm's Requirement (UV Layer (Top & Bottom))	2000.0

2122

National Test House (ER), Kolkata

IS 2314 (2023) - Steel Sheet Piling Section - Specification - Part 2 Cold Formed Sheet Pile

Steel Sheet Piling Section - Specification - Part 2 Cold Formed Sheet Pile

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Tensile Strength)	1000.0
4 (Yield Stress)	1000.0
4 (Elongation)	1000.0
4 (Carbon)	500.0
4 (Manganese)	500.0
4 (Sulfur)	500.0
4 (Phosphorus)	500.0
4 (Silicon)	500.0
8 (Dimensions)	3000.0
8 (Mass)	2000.0
9 (Surface Defects)	1000.0
4 (Bend Test)	1000.0

2123

National Test House (ER), Kolkata

IS 15298 : Part 2 (2016) - Personal protective equipment: Part 2 safety footwear (Second Revision)

Personal protective equipment: Part 2 safety footwear (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Test on Whole Footwear)	4000.0
5.1 (Test on Upper)	3000.0
5.1 (Test on Vamp lining)	2500.0
5.1 (Test on Quarter Lining)	2500.0
5.1 (Test on Tongue)	1000.0
5.1 (Test on Outsole)	3000.0
5.1 (Test on Insocks and insoles)	1000.0
6.2.2.2 (Electrical Resistance(Antistatic))	5000.0
5.4.7 (pH of Upper)	500.0
5.4.9 (Chromium VI Content of Upper)	500.0
5.5.4 (pH of Vamp Lining)	250.0
5.5.5 (Chromium VI Content of Vamp Lining)	250.0
5.5.4 (pH value of Quarter Lining)	250.0
5.5.5 (Chromium VI Content of Quarter lining)	250.0
5.6.2 (pH value of Tongue)	250.0
5.6.3 (Chromium VI Content of Tongue)	250.0
5.7.2 (pH of Insock)	250.0
5.7.5 (Chromium VI content of Insock)	250.0
5.7.2 (pH of Insole)	250.0
5.7.5 (Chromium VI content of Insole)	250.0

2124

National Test House (ER), Kolkata

IS 16719 (2022) - Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification

Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
xii) (Flexibility (180º bend over 6.25 mm diameter rod))	1200.0
xi) (Salt Spray, 5 percent NaCl (see Note))	100000.0
x) (Water absorption, percent by weight, Max)	2500.0
ix) (Impact resistance, Min)	2500.0
viii) (Hardness, Min)	2500.0
viii) (Cathodic disbondment test, Max)	2500.0
vi) (Abrasion resistance, Max)	2500.0
v) (c) (c)Sodium hydroxide pass 1 percent by weight)	2500.0
v) (b) (b) Sulphuric acid pass 1 percent by weight)	2500.0
v) (a) (a) De-ionized water pass)	2500.0
v) (Immersion and vapour phase, 30 days)	5000.0
iv) (Adhesion test)	2500.0
iv) (a) (a) Tape test)	1200.0
iii) (Electrical insulation (holidays))	2500.0
ii) (Thickness, dry film(Internal &External application))	1200.0
6.5 (Lead Restriction)	2500.0
6.3 (Consistency)	1200.0
6.2 (Recoating Properties)	1200.0
6.1 (Application Properties)	1200.0

2125

National Test House (NWR), Jaipur

Custom Specification (Viridian Lab) - Custom Specification (Viridian Lab)

Custom Specification (Viridian Lab)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	-

2126

National Test House (WR), Mumbai

Customized specification for Hypertron Hybrid - Customized specification for Hypertron Hybrid

Customized specification for Hypertron Hybrid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Acid-Alkali resistance (Immersed membranesTensile strength and Elongation test)-As per test method ASTM D 412)	6000.0
- (Hardness(Shore D) - As per test method ASTM D 2240)	1000.0
- (Hardness(Shore A) - As per test method ASTM D 2240)	1000.0
- (Elongation (As per test method ASTM D 412))	2000.0
- (Tensile strength (As per test method ASTM D 412))	2000.0
- (Tear Resistance (As per test method ASTM D 624))	4000.0
- (Taber abrasion(As per test method ASTM D 4060))	3000.0
- (Water permeability of coating(As per test method ASTM E 96))	5000.0
- (Salt spray test-100 hours (As per test method ASTM B 117))	4000.0
- (Impact test (As per test method ASTM D 2794))	1500.0

2127

National Test House (ER), Kolkata

Custom/Sanitary Napkin/2023 - Custom/Sanitary Napkin/2023

Custom/Sanitary Napkin/2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Pad Length)	500.0
2.0 (Pad width)	500.0
3.0 (Pad Thickness)	1000.0
5.0 (Absorbency)	1000.0
6.0 (pH of Absorbent Material)	1000.0
4.0 (Weight of Pad)	1000.0

2128

National Test House (NWR), Jaipur

IS 191 (2007) - Copper - Specification (Fourth Revision)

Copper - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Copper + Silver )	2000.0

2129

National Test House (NWR), Jaipur

IS:191 Clause 7.1 Table 4 - Copper-Specification

Copper-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (4) (Copper)	2000.0

2130

National Test House (ER), Kolkata

IS 4559 (1993) - Single operator rectifier type dc arc welding power source - Specification (Second Revision)

Single operator rectifier type dc arc welding power source - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2 (Insulation Resistance test)	5000.0
11.8 (High Voltage Test)	10000.0