NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2071

National Test House (SR), Chennai

IS 2548 (Part 1) : 1996 - PLASTIC SEATS AND COVERS FOR WATER-CLOSETS-SPECIFICATION Part 1-THERMOSET SEATS AND COVERS

PLASTIC SEATS AND COVERS FOR WATER-CLOSETS-SPECIFICATION Part 1-THERMOSET SEATS AND COVERS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Shapes)	500.0
5.2 (Finish)	500.0
6.1 (Dimension)	1000.0
7 (Hinging device)	1000.0
8 (Buffers)	1000.0
9.1 (Strength requirement for seats)	1000.0
9.2 (Impact resistance)	1000.0
9.3 (Water absorption)	1000.0
9.4 (Rigidity)	1000.0
9.5 (Staining by Seats and Covers)	1000.0
9.6 (Staining and/or Other Surface Deterioration of Seats & Covers)	1000.0
9.7 (Endurance Test)	5000.0

2072

National Test House (SR), Chennai

IS 7231:2021 - Plastic Flushing Cisterns for Water Closets and Urinals

Plastic Flushing Cisterns for Water Closets and Urinals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Construction-Exposed and Concealed Cistern)	1000.0
5.2 (Construction-Concealed Cistern)	1000.0
6 (Finish)	500.0
7.1 (Flushing Arrangement)	1000.0
7.2 (Working water level)	1000.0
7.3 (Freedom from leakage)	1000.0
7.4 (Reduced water level)	1000.0
7.5 (Discharge capacity)	1000.0
7.6 (Discharge rate)	1000.0
8.1 (Distortion Resistance Test)	1000.0
8.2 (Dead load test)	1000.0
8.3 (Front Thrust Test)	1000.0
8.4 (Impact test)	1000.0

2073

National Test House (SR), Chennai

CUS/SR/MECH-43 (2022) - Vaccum Cleaner

Vaccum Cleaner

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Suction Pressure, mmWC)	3000.0

2074

National Test House (SR), Chennai

CUS/SR/MECH-42 (2022) - Fiber Optic Cable

Fiber Optic Cable

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Tensile test)	4000.0
2.0 (Crush test)	5000.0

2075

National Test House (NWR), Jaipur

IS 1367 : Part 3 (2017) - Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Wedge loading test)	3000.0
7 (Proof Load, N.)	3000.0
7 (Hardness Test)	2000.0
7 (Tensile load, N.)	3000.0
2 (Dimensions)	1500.0

2076

National Test House (SR), Chennai

IS 73 (2013) - Paving bitumen - Specification (Fourth Revision)

Paving bitumen - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(vi) (Softening Point (R&B))	1200.0
6.2(v) (Solubility in TCE)	1200.0
6.2 (i) (Penetration,25 dg 100g 5sec 0.1 mm)	1200.0
6.2(iv) (Flash Point, cleveland Open cup)	1200.0

2077

National Test House (NWR), Jaipur

IS 14490 (2018) - Plain copier paper - Specification (First Revision)

Plain copier paper - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5 (IS:1060 (Part-5/sec.4) (Cobb))	2000.0
5.5 (IS/ISO 2471 (Opacity))	1000.0
5.5 (IS:1060 (Part-3)(Wax Pick No.))	1000.0
5.5 (IS:9894 (Smoothness (Bendsten)))	2000.0
5.5 (IS:9894 (Smoothness (Bendsten) other side))	2000.0
5.5 (IS:1060 (Part-6/sec.1))	1000.0
5.5 (IS:1060 (Part-6/Sec.1) (Tear Index))	1000.0
5.5 (IS:1060 (Part-5/sec.6) (Tensile Index (MD)))	1000.0
5.5 (IS:1060 (Part-5/sec.6) (Tensile Index (CD)))	1000.0
5.5 (Ash Content)	2000.0
5.2 (Moisture)	2000.0
5.5 (Brightness)	2000.0
5.4 (Thickness)	1000.0
5.3 (Grammage)	1000.0
5.1 (General)	1000.0
5.6 (IS:14490)	500.0
5.2 (Moisture)	2000.0
5.5 (Taber Stiffness )	1000.0

2078

National Test House (WR), Mumbai

IS 6745 (1972) - Mass of Zinc Coating (IS 6745)

Mass of Zinc Coating (IS 6745)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Mass of Zinc Coating,(IS 6745:1972))	2000.0

2079

National Test House (ER), Kolkata

NTH ER PAINT LAB CUSTOMER SPECIFICATION 2023 (2023) - NTH ER PAINT LAB CUSTOMER SPECIFICATION 2023

NTH ER PAINT LAB CUSTOMER SPECIFICATION 2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Acid value %)	1200.0
2 (Wet Opacity/Coverage capacity Minimum & Maximum(as per IS 101))	1500.0
3 (Drying Time at 30 Deg C a) Surface Dry b) Hard Dry as per IS 101)	1200.0
4 (Mass in Kg/10 litre as per IS 101)	1200.0
5 (Salt spray Test 5 % NAcl solution for 100 hours ASTM B 117)	5000.0
6 (Abrasion Resistance Test ASTM D 4060)	3500.0
7 (Density gm/cc IS 101 part1 Sec 7)	1200.0
8 (Solid content % IS 101 part8 Sec 2)	1200.0
10 (PH at 25 Deg C)	500.0
12 (2000 hrs QUV)	100000.0

2080

National Test House (SR), Chennai

IRC:SP:20 (2002) - RURAL ROADS MANUAL

RURAL ROADS MANUAL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Appendix 10.8 (Bitumen/Binder Content)	3000.0
Custom (Bitumen/Binder content of DBM core [On the lines of IRC:SP:20 (2002)])	4000.0
Custom (Bitumen/Binder content of BC core [On the lines of IRC:SP:20 (2002)])	4000.0

2081

National Test House (ER), Kolkata

CUSTOM-25-ER-MCALI - Calibration of Floating Carriage Micrometer

Calibration of Floating Carriage Micrometer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	2400.0

2082

National Test House (ER), Kolkata

IS 16172 (2023) - Reinforcement couplers for mechanical splices of bars in concrete - Specification

Reinforcement couplers for mechanical splices of bars in concrete - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Visual Observation (Workmanship and Finish))	1000.0
8 (Chemical composition, % by mass)	3000.0
9.2 (Tensile Strength as per IS 1608(Part 1):2022)	1500.0
9.2 (Percentage Elongation as per IS 1608(Part 1):2022)	1500.0
9.2 (Visual Observation for Nature & Location of failure of spliced specimen (With Coupling).)	1000.0
0 (Test results as per customer test request.)	15000.0
9.2.1 (The tensile strength of the spliced bar ( With Coupling))	2500.0
9.2.2 (The minimum percentage elongation at maximum force (also termed as uniform elongation) for spliced bar ( with coupler) when measured in accordance with the method given in Annex B in the reinforcing bar outside the length of the mechanical splice before failure.)	1000.0
9.2.2 (The percentage elongation at maximum force for unspliced specimen)	1000.0

2083

National Test House (NR), Ghaziabad

AWS specification - Specification for Fracture Test

Specification for Fracture Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Fracture Test)	9000.0

2084

National Test House (ER), Kolkata

CUSTOM-24-ER-MCALI (2023) - Calibration of Profile Projector

Calibration of Profile Projector

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Magnification)	2000.0
2 (Angle)	2000.0
3 (Length)	2000.0
4 (Length)	2000.0

2085

National Test House (SR), Chennai

IS 516(Part 1/Section 1):2021 - Hardened Concrete-Methods of Tests-( Part 1-Testing of strength of Hardened Concrete-Determination of Compressive, Flexural strength and Split tensile strength)

Hardened Concrete-Methods of Tests-( Part 1-Testing of strength of Hardened Concrete-Determination of Compressive, Flexural strength and Split tensile strength)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Flexural strength(IS 516(Part 1/Section 1):2021))	2500.0
3 (Compressive strength of concrete cubes(MPa))	1200.0

2086

National Test House (SR), Chennai

MORTH 5th Revision table 900-4/IRC:111-2009 - Dense bituminous macadam/bituminous concrete-Specification for dense graded bitumen mixes

Dense bituminous macadam/bituminous concrete-Specification for dense graded bitumen mixes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Morth 5th revision table 900-4,5.i (Quality of binder-PAVING BITUMEN (IS 73:2013))	5000.0
- (Deleterious materials (IS 2386))	2000.0
- (Aggregate Impact value(IS 2386(4)))	1500.0
- (Aggregate Abrasion Value(IS 2386(4)))	1500.0
- (Flakiness & Elongation Index-Combined(IS 2386(1)))	3000.0
- (Stripping Value of aggregates(IS 6241))	1500.0
- (Water absorption of aggregates(IS 2386(3)))	1000.0
- (Grading of Aggregates/Grain size analysis(IS 2386(1)))	2000.0

2087

National Test House (NER), Guwahati

IS 2095 : Part 1 (2011) - Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards

Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3, Table3, 8.1 (Transverse Strength-IS: 2542 (Part 2/Sec 4))	4000.0
7.1, Table1 /Table2, 8.1 (Dimensions-IS: 2542 (Part 2/Sec 1))	500.0

2088

National Test House (ER), Kolkata

IS 9857:1990 (1990) - Welding Cable Specification

Welding Cable Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1.a.2 (Test on Conductor- Conductor Resistance Test)	2500.0
10.1.b (Test for thickness of Covering)	1500.0
10.1.d (High Voltage Test (Water Immersion Test))	3500.0

2089

National Test House (WR), Mumbai

IS 16098(Part 2) - STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE

STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Outer Diameter(mm.))	1000.0
- (Inner Diameter(mm.))	1000.0
- (Wall Thickness(mm.))	1000.0
- (Impact Test)	2000.0
- (Resistance to heating oven test)	2000.0
- (Ring Flexibility)	2000.0

2090

National Test House (NR), Ghaziabad

Fastener as per ISO/EN/BS EN - Mechanical properties of Fastener as per ISO 898 (Part- 1, 2), EN 14399 (P-3,5,9), ISO 10683

Mechanical properties of Fastener as per ISO 898 (Part- 1, 2), EN 14399 (P-3,5,9), ISO 10683

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Proof Load, kN)	3000.0
7.2 (Hardness)	2000.0
7.3 (Surface Integrity)	2000.0
7.4 (Depth of Decarburisation)	2000.0
7.5 (Coating Thickness, micron)	2000.0
7.6 (Adhesion test)	1000.0
6 (Chemical composition, % by mass)	2500.0
5.1 (Wedge Load Test)	3000.0
5.2 (Tensile test- TS, YS, %E and RoA)	4000.0
5.4 (Charpy Impact Test, At -20 deg C)	3000.0
5.5 (Compression load Test)	3000.0
5.5 (Dimensions, mm)	2000.0

2091

National Test House (ER), Kolkata

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - SPECIFICATION FOR EPOXY CUM POLYURETHANE PAINTING SYSTEM (TWO PACK) FOR THE EXTERIOR PAINTING OF RAILWAY COACHES, DIESEL AND ELECTRIC LOCOMOTIVES AND OTHER INDUSTRIAL APPLICATIONS

SPECIFICATION FOR EPOXY CUM POLYURETHANE PAINTING SYSTEM (TWO PACK) FOR THE EXTERIOR PAINTING OF RAILWAY COACHES, DIESEL AND ELECTRIC LOCOMOTIVES AND OTHER INDUSTRIAL APPLICATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
APPENDIX –VII METHOD OF IDENTIFYING AROMATIC AND ALIPHATIC ISOCYANATE (Identification of poly isocyanate ( aliphatic or aromatic in nature) procedure in Appendix- VII. Specification No M&C /PCN/100/2018)	3000.0

2092

National Test House (ER), Kolkata

IS 4984 (2016) - Polyethylene pipes for water supply - Specification (Fifth Revision)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.6 (Overall Migration (Chemical Lab))	2000.0
8.4 (Melt Flow Rate at 190 degree celcius and 5kgf)	2000.0
8.2 (Longitudinal Reversion Test)	2000.0
7.4 (Wall Thickness)	500.0
7.2 (Length)	1000.0
7.1 (Visual Appearance)	500.0
6.2 (Colour)	-
8.3 (Carbon Black Dispersion)	1000.0
7.4.1 (Outside Diameter)	500.0
7.4.1.2 (Ovality)	100.0
6.2.1 (Colour Of strip)	-
6.2.1 (Width Of Strip)	100.0
Firm's request (Hardness(Shore D))	1000.0
firm's request (Density)	2000.0

2093

National Test House (ER), Kolkata

Custom-33-ER-LM - Load Test

Load Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Load Test)	15000.0

2094

National Test House (WR), Mumbai

IS 1367 : Part 14 : Sec 3 : 2018 (2018) - Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless-steel Fasteners Section 3 Set Screws and Similar Fasteners not Under Tensile Stress (Fourth Revision)

Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless-steel Fasteners Section 3 Set Screws and Similar Fasteners not Under Tensile Stress (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Visual Observations of Designation, Marking and Finish)	1000.0
5.2 (Hardness Test in Vickers/ Brinell/Rockwell as per the relevant IS spec.)	2000.0
4 (Chemical compositions (in % )of stainless steels suitable for fasteners in accordance with this part of ISO 3506 are given in table 2.)	5000.0

2095

National Test House (WR), Mumbai

IS 1367 : Part 6 (2018) - Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

Technical Supply Conditions for Threaded Steel Fasteners Part 6 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Nuts with Specified Property Classes — Coarse Thread and Fine Pitch Thread

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical composition, % by mass)	2500.0

2096

National Test House (WR), Mumbai

IS 1367 : Part 3 (2017) - Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical Composition, % by mass)	2500.0
7 (Surface Integrity (Table 3 in accordance with ISO 6157 - 1 ))	1200.0
7 (Mechanical and physical properties (tensile Strength))	3.0
7 (Mechanical and physical properties (ultimate tensile load))	3000.0
7 (Mechanical and physical properties (Proof load test))	2000.0
7 (Mechanical and physical properties (Hardness,Rockwell C scale))	2000.0
7 (Mechanical and physical properties (Hardness,Vickers))	2000.0

2097

National Test House (WR), Mumbai

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Surface Integrity)	1200.0
7 (Hardness Test)	2000.0
7 (Proof Load)	3000.0
7, Table 6 (Rockwell hardness, HRC)	2000.0
6 (Chemical composition, % by mass)	2500.0

2098

National Test House (WR), Mumbai

IS 1367 : Part 3 (2017) - Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Surface Integrity)	1200.0
7 (Hardness Test)	2000.0
7 (Wedge loading test)	3000.0
7 (Proof Load, N.)	3000.0
7 (Tensile load, N.)	3000.0
2 (Dimensions)	1500.0
6 (Carbon, % by mass)	500.0
6 (Phosphorus, % by mass)	500.0
6 (Sulphur, % by mass)	500.0
6 (Boron, % by mass)	625.0

2099

National Test House (WR), Mumbai

IS 1367 : Part 13 (2020) - Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Coating Thickness)	2000.0

2100

National Test House (SR), Chennai

IS 1708/IS 3629/IS 4970/IS 1331 - Methods of small clear specimens of Timber/Structural timber in building/keys for identification of timber/Specification for cut sizes of timber [All Timber]

Methods of small clear specimens of Timber/Structural timber in building/keys for identification of timber/Specification for cut sizes of timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Compressive strength parallel to grain(IS 1708(8)1986))	1500.0
2 (Compressive strength perpendicular to grain(IS 1708( 9)1986))	1500.0
3 (Static bending strength-M of R ( IS 1708(5)1986))	1500.0
4 (Screw holding power(IS 1708(15)1986))	1500.0
5 (Nail holding power(IS 1708(15)1986))	1500.0
6 (Specific gravity(IS 1708(2)1986))	1000.0
7 (Moisture content(IS 1708(1)1986))	1000.0
8 (Identification of Timber(IS 4970-1973))	5000.0
9 (Timber grade(IS 1331-1971))	3000.0