NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2131

National Test House (SR), Chennai

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Test)	2000.0
7 (Proof Load)	3000.0
6 (Chemical composition, % by mass)	2500.0
7, Table 6 (Rockwell hardness, HRC)	2000.0

2132

National Test House (NER), Guwahati

IS 13801 (2013) - Chequered Cement Concrete Tiles -

Chequered Cement Concrete Tiles -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.6 (Resistance to wear)	2000.0
12.5 (Wet transverse strength)	2000.0
12.4 (Water Absorption)	1000.0
7 (Dimension: Thickness)	1000.0
7.1,Table 1,Column 3 (Dimension-Breadth(IS 13801:2013))	-
7.1,Table 1,Column 2 (Dimensions -Length)	300.0
10 (General Quality)	100.0
8.3 (Thickness of Wearing Layer)	500.0
12.3 (Straightness)	500.0
12.2 (Perpendicularity)	500.0
12.1 (Flatness)	500.0

2133

National Test House (WR), Mumbai

Custom Specification for Sand (Chemical) WR - Custom Specification for Sand (Chemical) WR

Custom Specification for Sand (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annexure (Please see the Annexure)	5000.0

2134

National Test House (NWR), Jaipur

IEC 60099 - 4 (2014) - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.13 (Seal Leak Test)	10000.0

2135

National Test House (NER), Guwahati

Custom - WATER/ Effluent treatment plant Water/ Sewage water/Filter water/ Potable water/River water

WATER/ Effluent treatment plant Water/ Sewage water/Filter water/ Potable water/River water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Total suspended solids, mg/l)	1200.0
3 (Total Dissolved Solids, mg/l (IS 3025 part 16))	1200.0
4 (Biological Oxygen Demand, mg/l)	3000.0
6 (Total Alkalinity (as CaCO3), mg/l (IS 3025 (part 23)))	1200.0
5 (Chemical Oxygen Demand, mg/l)	2000.0
7 (pH Value)	1200.0
8 (Oil & grease, mg/l)	1200.0
7 (Faecal Coliform)	2000.0

2136

National Test House (NR), Ghaziabad

IS 4020(Parts 1 to 16):1998 RA 2018 - Door shutters-Methods of Tests

Door shutters-Methods of Tests

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2-2.1 (Dimension: Height(mm) (IS 4020 (part 2) : 1998))	250.0
2-2.2 (Dimension:Width (IS 4020 (part 2) : 1998))	250.0
2-2.3 (Diemension:Thickness (IS 4020 (part 2) : 1998))	250.0
10 (Slamming Test (IS 4020 (part 10) : 1998))	1000.0
8 (Shock resistance Test (IS 4020 (part 8) : 1998))	1500.0
7 (Edge Loading Test ( IS 4020 (part 7) : 1998))	1500.0

2137

National Test House (SR), Chennai

900173-Custom RO Salt (2023) - Customer Requirement on RO Salt Sample Analysis

Customer Requirement on RO Salt Sample Analysis

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (a) (Loss on Ignition (at 450 deg C) after 1 hour)	1200.0
1 (b) (Colour (after LoI at 450 deg C for 1 hour))	1200.0
2 (a) (Loss on Ignition (at 450 deg C) after 2 hours)	1200.0
2 (b) (Colour (after LoI at 450 deg C for 2 hours))	1200.0

2138

National Test House (SR), Chennai

Relevant Standards (2023) - Custom Tests Aluminium Composite

Custom Tests Aluminium Composite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Weight (as such))	1000.0
2 (Dimension, Panel Width, mm)	500.0
3 (Dimension Panel Length, mm)	500.0
4 (Panel Thickness, mm)	1000.0
5 (Density at 27degC, g/cc)	1000.0
6 (Tensile Strength, kg/sq.mm)	1000.0
7 (Tensile Yield Strength, kg/sq.mm)	500.0
8 (Elongation, %)	500.0
9 (Flexural Strength, Kg/sq.mm)	2000.0
10 (Compressive Strength, MPa)	2000.0
11 (Water Absorption, %)	1000.0

2139

National Test House (SR), Chennai

DIN EN 12467 (July 2018) - Fibre-Cement Flat Sheets-Product specification and test methods

Fibre-Cement Flat Sheets-Product specification and test methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.2 (Appearance & finish)	2000.0
5.2 (Classification)	2000.0
5.3.2 (Dimension : Nominal length)	1000.0
5.3.2 (Dimension : Nominal Width)	1000.0
5.3.3 (Dimension : Thickness)	1000.0
5.3.5.1 (Shape-Straightness of edges)	1000.0
5.3.5.2 (Shape-Squareness of edges)	1000.0
5.4.2 (Apparent density)	1000.0
5.4.3 (Moisture movement)	3000.0
5.4.4 (Mechanical characteristics-Bending strength(MOR))	4000.0
5.4.4 (Mechanical Characteristics-Modulus of elasticity(MOE))	4000.0
5.4.5 (Water impermeability)	4000.0
5.5.2 (Freeze-thaw)	25000.0
5.5.3 (Heat-rain)	100000.0
5.5.4 (Warm water)	25000.0
5.5.5 (Soak-dry)	25000.0

2140

National Test House (NR), Ghaziabad

IS 2645:2003 (RA 2017) - Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification

Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4 (Chloride content)	2000.0
- (pH)	1000.0

2141

National Test House (ER), Kolkata

IS 613 (2000) - Copper Rods and Bars for Electrical Purposes

Copper Rods and Bars for Electrical Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (Resistance of a Solid Conductor)	5000.0
6 (Freedom from defects)	1000.0
9.1 (Tensile Strength)	2000.0
9.1 (Elongation)	1000.0
9 (Vickers Hardness)	2000.0
9.2 (Bend Test)	1000.0
10 (Dimensions)	1000.0
11 (Electrical Resistivity Test)	2000.0
8 (Chemical composition as given in for grades ETP, FRHC of IS 191 (Part 5) or IS 191 (Part 6) respectively.)	5000.0

2142

National Test House (ER), Kolkata

CUSTOM - Iron content in Mild Steel

Iron content in Mild Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Iron content)	2000.0

2143

National Test House (NWR), Jaipur

#IS 1161 - Steel Tubes for Structural Purposes

Steel Tubes for Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.6 (Mass)	1000.0
Cl.6 (Dimensions)	1000.0
Cl.11.2 (Tensile test)	3000.0
Cl.11.3 (Bend test /Flattening)	1000.0
Cl.8 (Galvanisation (Optional))	3000.0
Cl.8 (Coating Thickness)	1000.0
0 (Adhesion test)	1000.0
Cl. 7 (Visual Examination)	1000.0

2144

National Test House (ER), Kolkata

ND Custom 9 (2023) - Training on Manual Metal Arc welding/ Gas Metal arc Welding

Training on Manual Metal Arc welding/ Gas Metal arc Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (One Day Training Programme on MMAW/GMAW)	1000.0
2 (Two Days Training Programme on MMAW/GMAW)	1000.0
3 (Three Days Training Programme on MMAW/GMAW)	3000.0
4 (Four Days Training Programme on MMAW/GMAW)	4000.0
5 (Five Days Training Programme on MMAW/GMAW)	5000.0

2145

National Test House (WR), Mumbai

IS 14948 : 2001 (2001) - PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION

PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION (Please refer annexure for tests result)	45000.0

2146

National Test House (WR), Mumbai

IS 16943 : 2019 (2019) - TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION

TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION (Please refer annexure for test result)	30000.0

2147

National Test House (WR), Mumbai

ASTM / IS / EN - Block Jointing Mortar

Block Jointing Mortar

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. No. 6 of ASTM C 1660 - 2009 (Splitting Tensile Strength Test, Splitting Tensile Strength in N/mm^2)	5000.0
ASTM D 7234 (Pull out Adhesion Strength of mortar to block, MPa)	5000.0

2148

National Test House (SR), Chennai

IS 14871:2000 - PRODUCTS IN FIBRE REINFORCED CEMENT —LONG CORRUGATED OR ASYMMETRICAL SECTION SHEETS AND FITTINGS FOR ROOFING AND CLADDING

PRODUCTS IN FIBRE REINFORCED CEMENT —LONG CORRUGATED OR ASYMMETRICAL SECTION SHEETS AND FITTINGS FOR ROOFING AND CLADDING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5.1.1. & B1 (Distance Between Extreme Complete Corrugation Pitch, a)	500.0
5.5.1.1. & B1 (Measurement of Corrugation Height, h)	500.0
B2 (Dimension-Length)	500.0
B2 (Dimension-width)	500.0
B3 (Dimension-Thickness)	1000.0
B4 (Dimension: Squareness)	500.0
B5 (Dimension: Height of Edges)	500.0
5.5.1.2 (Mechanical characteristics: Breaking Load)	5000.0
5.5.1.2 (Apparent density)	1000.0
5.5.2.b. (Impermeability)	4000.0

2149

National Test House (ER), Kolkata

IS 5154-Part 1- 2013 (2013) - LEAD-ACID TRACTION BATTERIES PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST [ Bag plate Lead Acid Secondary Battery)

LEAD-ACID TRACTION BATTERIES PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST [ Bag plate Lead Acid Secondary Battery)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Capacity Test on the lines of IS 5154 - Part 1 Sample shall meets the requirements ,Ca = 0,85 CN at the first cycle; Ca = 1,00 CN at or before the tenth cycle. Charging Current . Specific Gravity and Cut off Voltage as per Manufacturer instruction)	20000.0
6.1 (Energy Density Test)	5000.0

2150

National Test House (WR), Mumbai

IS 1285 (2023) - Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Chemical Analysis (as per IS 733))	5000.0
10 (Tensile Strength (as per IS 733))	1000.0
10 (0.2 % Proof Stress (as per IS 733))	1000.0
10 (% Elongation (as per IS 733))	1000.0
8 (Dimension)	1000.0
4 (Mass per meter)	1000.0
6 (Freedom from Defect)	1000.0
8 (Copper, % by mass)	600.0
8 (Magnesium, % by mass)	600.0
8 (Silicon, % by mass)	600.0
8 (Iron, % by mass)	600.0
8 (Manganese, % by mass)	600.0
8 (Zinc, % by mass)	600.0
8 (Titanium, % by mass)	600.0
8 (Others, % by mass)	600.0
8 (Chromium, % by mass)	600.0
8 (Aluminium, % by mass)	600.0
4 (Dry Film Thickness - Powder Coating as per IS 13871 by Test Method 5 of IS 101 Part-3 Sec.2 1989 or any other test method specified by the customer)	1500.0

2151

National Test House (ER), Kolkata

CUSTOM - Fish Food

Fish Food

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Protein content)	2000.0

2152

National Test House (NWR), Jaipur

IS 2629 (1985 (Reaffirmed 2021)) - Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification

Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Mass of Coating)	2000.0

2153

National Test House (WR), Mumbai

IS 2086 (1993) - Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision)

Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2154

National Test House (WR), Mumbai

Custom - Berger QUV test - QUV test of Paint and Coating

QUV test of Paint and Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-2 (Salt spry for 96 hrs)	5000.0

2155

National Test House (WR), Mumbai

IS 2086 (1993) - Carriers and Bases in Electrical Fuses for voltages up to 650 V - Specification

Carriers and Bases in Electrical Fuses for voltages up to 650 V - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (All possible tests as per customer requirement)	20000.0

2156

National Test House (ER), Kolkata

2664 - Specification for Quenching Oil

Specification for Quenching Oil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Ash, Percent by mass)	1000.0
4 (Pour point, Dg C)	1000.0
6 (Kinematic Viscosity at 40 Dg C, cSt)	1000.0
7 (Viscosity Index)	1000.0
8 (Saponification Value)	1000.0
9 (Volatility (Loss on heating at 150 dg C for two hours))	1000.0
11 (Copper strip corrosion test at 100 dg C for 3h)	1000.0

2157

National Test House (WR), Mumbai

IS 9968 : Part 1 (1984) - Elastomer Insulated Cables

Elastomer Insulated Cables

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.2 (Conductor Resistance)	2000.0
21.1 (Insulation resistance)	1000.0
22.1 (High voltage (water immersion) test)	1000.0
22.1 (Flammability test)	1000.0

2158

National Test House (WR), Mumbai

IS 3384 (1986) - bitumen primer for use in waterproofing and damp-proofing

bitumen primer for use in waterproofing and damp-proofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1(v)c (Test on residue from distillation upto 360 dg , c)matter soluble in carbon disulphide or ccl4 or tce)	1200.0
3.1(v)b (Test on residue from distillation upto 360 dg , b)penetration 25 dg 100g 5 sec)	1200.0
3.1(v) a (Test on residue from distillation upto 360 dg , a)ductility)	1200.0
3.1(iv) (water Content )	1200.0
3.1(iii) (Flash point pensky martens closed type)	1200.0
ADDITIONAL pARAMETER (Specific gravity)	1200.0

2159

National Test House (SR), Chennai

IS 14862:2000 - Fibre cement flat sheets-Specification

Fibre cement flat sheets-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Dimensional and Geometrical Characteristics)	2000.0
5.2.1 (Mechanical and Physical Characteristics-Bending strength)	4000.0
5.2.2 (Mechanical and Physical Characteristics-Apparent density)	1000.0
6.1 (Type characteristics-Bending strength)	8000.0
6.2 (Type characteristics-Water impermeability)	4000.0
6.3 (Type characteristics-Frost Resistance)	25000.0
6.4 (Type characteristics-Warm water)	25000.0
6.6 (Type characteristics- Heat rain test)	100000.0
6.5 (Type characteristics-soak- dry test)	25000.0

2160

National Test House (NR), Ghaziabad

IRC 137-2022 (2022) - Guideline on use of Fibre-reinforced polymer bars in road projects

Guideline on use of Fibre-reinforced polymer bars in road projects

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2.5.1 (Mean measured cross sectional area ASTM D7205)	1000.0
4.1 (Guaranteed Ultimate tensile strength, ASTM D 7205)	3000.0
0 (Mean Tensile Modulus of Elasticity, ASTM D 7205)	2000.0
4.1 (Mean Ultimate Tensile Strain, ASTM D 7205)	3000.0
0 (Guuaranteed Transeverse Shear Strength, ASTM D 7617)	5000.0
0 (Guuaranteed Bond Strength, ASTM D 7913)	10000.0
0 (Mean moisture Absorption to Saturation, ASTM D570)	1000.0