| 1651 |
National Test House (ER), Kolkata
| 12089 - SPECIFICATION FOR GRANULATED SLAG FOR THE MANUFACTURE OF PORTLAND SLAG CEMENT |
SPECIFICATION FOR GRANULATED SLAG FOR THE MANUFACTURE OF PORTLAND SLAG CEMENT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Manganese oxide) |
1200.0 |
|
| 3.2 (Magnesium oxide) |
1200.0 |
|
| 3.2 (Sulphide sulphur) |
1200.0 |
|
|
| 1652 |
National Test House (ER), Kolkata
| 1654:1992 - Lead Antimony Alloys-Specification |
Lead Antimony Alloys-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Antimony) |
1200.0 |
|
| 5.1 (Lead) |
1200.0 |
|
| 5.1 (Arsenic) |
1200.0 |
|
| 5.1 (Tin) |
1200.0 |
|
| 5.1 (Copper) |
1200.0 |
|
| 5.1 (Bismuth) |
1200.0 |
|
| 5.1 (Iron) |
1200.0 |
|
| 5.1 (Zinc) |
1200.0 |
|
| 5.1 (Silver) |
1200.0 |
|
|
| 1653 |
National Test House (WR), Mumbai
| IS 277 (2018) - Galvanized Steel Sheets (Plain and Corrugated) |
Galvanized Steel Sheets (Plain and Corrugated) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 14 ,15 (Dimensions) |
1000.0 |
|
| 3.3 (Thickness of sheet (uncoated), mm) |
1000.0 |
|
| 7 (Mass of Zinc coating ( Total Both sides)) |
2000.0 |
|
| 8.1 (Tensile Strength) |
2000.0 |
|
| 8.1 (Yield Stress) |
1000.0 |
|
| 8.1 (Elongation Percent) |
1000.0 |
|
| 8.2 (Bend Test) |
1000.0 |
|
| 12 (Freedom from Defects) |
1000.0 |
|
| 14 ,15 (Dimensions) |
1000.0 |
|
| 5.1 (Carbon, % by mass) |
500.0 |
|
| 5.1 (Manganese, % by mass) |
500.0 |
|
| 5.1 (Sulphur, % by mass) |
500.0 |
|
| 5.1 (Phosphorous, % by mass) |
500.0 |
|
| 0 (Coating Thickness of sheet at Top Side A, Bottom Side B and Total Coating Thickness) |
1500.0 |
|
| 0 (Uniformity of Zinc Coating) |
2000.0 |
|
| 5.1 (Chemical Compisitions in %, The base steel chemistry of galvanized sheets and
coils shall be as per Table 1. The Product analysis of
steel, when carried out either by the methods specified
in relevant parts of IS 228 or any other established
instrumental/chemical method) |
3500.0 |
|
| 3.3 (Thickness of Sheet) |
1000.0 |
|
|
| 1654 |
National Test House (NER), Guwahati
| IS 14255 (1995) - Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification |
Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 .1 (1) b (i) (Breaking load) |
1000.0 |
|
| 10.1 (1) b (ii) (Elongation test) |
1500.0 |
|
| 10.1 (1) b (iii) (Conductor resistance) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase1) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase2) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase3) |
1000.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-1) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Neutral) |
500.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase 3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average- Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-NE) |
250.0 |
|
| 10 .1 (1) d (i) (Elongation) |
250.0 |
|
| 10.1 (1) d (i) (Tensile strength) |
1000.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
500.0 |
|
| 10.2 k (High Voltage) |
1500.0 |
|
|
| 1655 |
National Test House (NER), Guwahati
| IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17.3 (Marking) |
100.0 |
|
| 15.1 (a) iv (Resistance of conductor-R) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-Y) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-B) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-Black) |
250.0 |
|
| 15.1.C (Minimum thickness of insulation) |
250.0 |
|
| 15.1.C (Minimum thickness of sheath) |
250.0 |
|
| 15.1.C (Average thickness of insulation) |
250.0 |
|
| 15.1.C (Average thickness of sheath) |
250.0 |
|
| 3.1 (Conductor) |
100.0 |
|
| 6.1 (Armouring) |
100.0 |
|
| 8.1 (Conductor) |
100.0 |
|
| 8.3 (Conductor) |
250.0 |
|
| 9.1 (Insulation) |
100.0 |
|
| 9.2 (Insulation) |
250.0 |
|
| 9.3 (Insulation) |
100.0 |
|
| 9.4 (Insulation) |
100.0 |
|
| 10.1 (Core Identification) |
100.0 |
|
| 10.2 (Core Identification) |
100.0 |
|
| 10.3 (CORE IDENTlFICATION) |
100.0 |
|
| 11.1 (Laying up of cores) |
100.0 |
|
| 12.1 (INNER SHEATH (COMMON COVERING)) |
100.0 |
|
| 12.2 (INNER SHEATH (COMMON COVERING)) |
250.0 |
|
| 12.3 (INNER SHEATH (COMMON COVERING)) |
100.0 |
|
| 13.1 (Armouring) |
100.0 |
|
| 13.3 (ARMOURING) |
100.0 |
|
| 13.1.4 (ARMOURING) |
250.0 |
|
| 14.1 (Outer Sheath) |
100.0 |
|
| 14.2 (Outer Sheath) |
250.0 |
|
| 15.1 (a) ii (Tensile Test ) |
500.0 |
|
| 15.1 (a) iii (Wrapping test) |
500.0 |
|
| 15.1.f (Insulation resistance Test) |
2000.0 |
|
| 15.1.e vii (Thermal stability) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-R) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-B) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Black) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-R) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-B) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-Black) |
2000.0 |
|
| 15.1.d.iv (Shrinkage test-R) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Y) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-B) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Black) |
2000.0 |
|
| 15.1.e iv (Shrinkage test) |
500.0 |
|
| 15.1.e vi (Hot deformation test Depth of indentation,) |
500.0 |
|
| 15.2 (h) (High Voltage AC) |
3500.0 |
|
| 15.1.g (High Voltage test at room temperature) |
2000.0 |
|
| 15.2 (c) (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.1.h (Flammability Test) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Black) |
250.0 |
|
| 15.1.e vii (Thermal stability) |
1000.0 |
|
| 15.1.d i (Tensile strength at break-Black) |
250.0 |
|
| 15.1.d i (Tensile strength at break-B) |
250.0 |
|
| 15.1.d i (Elongation at break-Y) |
250.0 |
|
| 15.1.d i (Tensile strength at break-R) |
250.0 |
|
| 15.1.d i (Elongation at break-R) |
250.0 |
|
| 15.1.d ii (Elongation at break-Y) |
250.0 |
|
| 15.1.d i (Elongation at break-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Black) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-R) |
250.0 |
|
| 15.1.d i (Elongation at break-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Black) |
250.0 |
|
| 15.1.e i (Elongation at break) |
1000.0 |
|
| 15.1.e i (Tensile strength at break) |
250.0 |
|
| 15.1.d i (Elongation at break-Black) |
250.0 |
|
| 15.1.d i (Tensile strength at break-Y) |
250.0 |
|
| 15.3 (a) (Conductor resistance-Black ) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Red ) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Yellow) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Blue) |
500.0 |
|
| 15.3 (b) (High Voltage AC) |
2000.0 |
|
| 15.1 (b) 2 vi (Mass of Zinc coating) |
2000.0 |
|
| 15.1 (b) 2 v (Uniformity of Zinc Coating) |
1000.0 |
|
|
| 1656 |
National Test House (ER), Kolkata
| CUSTOM - Mineral Wool |
Mineral Wool |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Shot Content) |
2000.0 |
|
|
| 1657 |
National Test House (ER), Kolkata
| 4276 - Soyabean Oil- Specification |
Soyabean Oil- Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.7 (Moisture and Insoluble impurities) |
1200.0 |
|
| 5.7 (Colour on the Lovibond scale, expressed as (Y + 5R)) |
1200.0 |
|
| 5.7 (Refractive index at 40ºC) |
1200.0 |
|
| 5.7 (Saponification value) |
1200.0 |
|
| 5.7 (Iodine value (Wijs)) |
1200.0 |
|
| 5.7 (Acid value, Max) |
1200.0 |
|
| 5.7 (Unsaponifiable matter,) |
1200.0 |
|
|
| 1658 |
National Test House (ER), Kolkata
| IS 16353 (2015) - Portland Cement Clinker - Specification |
Portland Cement Clinker - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Insoluble residue) |
600.0 |
|
| 5 (Total loss on ignition) |
600.0 |
|
| 5 (Alkali content expressed as sodium oxide(Na2O)) |
1200.0 |
|
| 5 (Magnesia) |
600.0 |
|
| 5 (Chloride content) |
500.0 |
|
| 5 (Free lime) |
600.0 |
|
| 5 (Total Sulphur content calculated as sulphuric anhydride(SO3)) |
500.0 |
|
| 5 (C3S + C2S) |
600.0 |
|
| 5 (C3A) |
600.0 |
|
| 5 (C3S) |
600.0 |
|
| 5 (Ratio of percentage of alumina to that of iron oxide) |
600.0 |
|
| 5 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
600.0 |
|
|
| 1659 |
National Test House (ER), Kolkata
| F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1500.0 |
|
| 4 (weight per litre in Kg/litre of mix paint) |
1200.0 |
|
| 5 (Touch Dry @ 30°C in Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C in Hours) |
500.0 |
|
| 7 (Full Cure @ 30°C) |
1500.0 |
|
| 8 (Overcoating Intervals Hours) |
1200.0 |
|
| 9 (Pot Life in Hrs) |
1200.0 |
|
| 10 (Adhesion ASTM D 4541 in Mpa) |
3500.0 |
|
| 11 (Temperature Resistance (at 150 Deg C ASTM D 2485 (Method A)) |
1500.0 |
|
|
| 1660 |
National Test House (ER), Kolkata
| F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1200.0 |
|
| 4 (weight per litre in Kg/litre) |
1500.0 |
|
| 5 (Touch Dry @ 30°C Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C ; Hours) |
500.0 |
|
| 7 (Full Cure @ 30°C in hours) |
1000.0 |
|
| 8 (Overcoating Intervals Hours) |
1500.0 |
|
| 9 (Pot Life) |
1500.0 |
|
| 10 (Adhesion ASTM D 4541 Mpa) |
3500.0 |
|
| 11 (Tensile Strength ( ASTM D638) N/mm2) |
5000.0 |
|
| 12 (Temperature Resistance (at 90 Deg C ASTM D 2485 Method A) |
2500.0 |
|
|
| 1661 |
National Test House (ER), Kolkata
| F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEWCONSTRUCTION |
F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEWCONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat in microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1500.0 |
|
| 4 (weight per litre in Kg/litre) |
1500.0 |
|
| 5 (Touch Dry @ 30°C) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C in; Hours) |
500.0 |
|
| 7 (Overcoating Intervals Hours) |
1500.0 |
|
| 8 (Pot Life) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541) |
3500.0 |
|
| 10 (MEK rub test ASTM D4752) |
1500.0 |
|
| 11 (% Zinc Content on dry film) |
2000.0 |
|
| 12 (Temperature Resistance at 400 Deg C ASTM D 2485 Method B) |
1500.0 |
|
|
| 1662 |
National Test House (ER), Kolkata
| F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1200.0 |
|
| 4 (weight per litre in Kg/litre) |
1200.0 |
|
| 5 (Touch Dry @ 30°C) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C) |
500.0 |
|
| 7 (Full Cure @ 30°C) |
1200.0 |
|
| 8 (Overcoating Intervals Hours) |
1500.0 |
|
| 9 (Pot Life in hours) |
1500.0 |
|
| 10 (Adhesion ASTM D 4541) |
3500.0 |
|
| 11 (Temperature Resistance at 80Deg C
Method A ASTM D 2485) |
1500.0 |
|
|
| 1663 |
National Test House (ER), Kolkata
| F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1300.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1000.0 |
|
| 4 (weight per litre in Kg/litre) |
1000.0 |
|
| 5 (Touch Dry @ 30°C in Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C in Hours) |
500.0 |
|
| 7 (Full Cure @ 30°C) |
1500.0 |
|
| 8 (Overcoating Intervals Hours) |
1500.0 |
|
| 9 (Pot Life in hours) |
1000.0 |
|
| 10 (Adhesion ASTM D 4541) |
3500.0 |
|
| 11 (Temperature Resistance at 80 Deg C
ASTM D 2485 Method A) |
2500.0 |
|
|
| 1664 |
National Test House (ER), Kolkata
| F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM
- NEW CONSTRUCTION |
F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM
- NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1000.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1000.0 |
|
| 4 (weight per litre in Kg/litre) |
500.0 |
|
| 5 (Touch Dry @ 30°C Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C Hours) |
500.0 |
|
| 7 (Overcoating Intervals Hours) |
1000.0 |
|
| 8 (Pot Life in Hrs for two component paints) |
1000.0 |
|
| 9 (Adhesion ASTM D 4541) |
3500.0 |
|
| 10 (Abrasion Resistance ASTM D 4060
For 1000 g load/1000 cycles CS-17 wheel) |
3500.0 |
|
| 11 (Temperature Resistance (at 80 deg C.)
Method A- ASTM D 2485) |
2500.0 |
|
|
| 1665 |
National Test House (ER), Kolkata
| IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement |
High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3 (Carbon) |
500.0 |
|
| 4.3 (Sulphur) |
500.0 |
|
| 4.3 (Phosphorus) |
500.0 |
|
| 4.3 (Silicon) |
500.0 |
|
| 4.3 (Manganese) |
500.0 |
|
| 4.3 (Chromium) |
500.0 |
|
| 4.3 (Nickel) |
500.0 |
|
| 4.3 (Molybdenum) |
500.0 |
|
| 4.3 (Copper) |
500.0 |
|
| 9.3 (Bend Test) |
1000.0 |
|
| 5.2 (Rib Area) |
1000.0 |
|
| 7.2 (Nominal Mass per meter Run) |
1000.0 |
|
| 9.4 (Rebend Test (Upto 25 mm)) |
1000.0 |
|
| 8.6 (Charpy Impact Test at Room Temperature) |
5000.0 |
|
| 9.2 (0.2 % Proof Stress / Yield Stress) |
1000.0 |
|
| 9.2 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area) |
500.0 |
|
| 9.2 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Crosss- Sectional Area,) |
500.0 |
|
| 9.2 (Tensile Strength (up to 12 mm),) |
500.0 |
|
| 9.2 (Tensile Strength (16 to 25 mm)) |
1000.0 |
|
| 9.2 (Tensile Strength (32 mm)) |
1500.0 |
|
| 9.4 (Rebend Test (32 mm)) |
1500.0 |
|
| 5.7 (Bond Stress of deformed bar at Ultimate Failure (for size up to 12 mm)) |
1250.0 |
|
| 5.7 (Bond Stress of plain bar at Ultimate Failure (for size up to 12 mm)) |
1250.0 |
|
| 5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.25 mm slip (For size up to 12 mm )) |
1250.0 |
|
| 5.7 (Bond Stress of deformed bar at 0.25 mm slip (for size up to 12 mm)) |
1250.0 |
|
| 5.7 (Bond Stress of Plain bar at 0.25 mm slip (for size up to 12 mm)) |
1250.0 |
|
| 5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.025 mm slip (For size up to 12 mm)) |
1250.0 |
|
| 5.7 (Bond Stress of Deformed bar at 0.025 mm slip (for size up to 12 mm)) |
1250.0 |
|
| 5.7 (Bond Stress of Plain bar at 0.025 mm slip (for size up to 12 mm)) |
1250.0 |
|
| 5.7 (Bond Stress of Plain bar at 0.025 mm slip (for size 16 to 32 mm)) |
1875.0 |
|
| 5.7 (Bond Stress of deformed bar at 0.025 mm slip (for size 16 to 32mm)) |
1875.0 |
|
| 5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.025 mm slip (for size 16 to 32 mm)) |
1875.0 |
|
| 5.7 (Bond Stress of Plain bar at 0.25 mm slip (for size 16 to 32 mm)) |
1875.0 |
|
| 5.7 (Bond Stress of deformed bar at 0.25 mm slip (for size 16 to 32 mm)) |
1875.0 |
|
| 5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.25 mm slip (for size 16 to 32 mm),) |
1875.0 |
|
| 5.7 (Bond Stress of plain bar at Ultimate Failure (for size 16 to 32 mm)) |
1875.0 |
|
| 5.7 (Bond Stress of deformed bar at Ultimate Failure (for size 16 to 40 mm)) |
1875.0 |
|
|
| 1666 |
National Test House (WR), Mumbai
| Customized Specification for FLEXSEAL 4 mm. - Customized Specification for FLEXSEAL 4 mm. |
Customized Specification for FLEXSEAL 4 mm. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength (Transverse) as per ASTM D 5147 (N/50mm.)) |
1000.0 |
|
| - (Tensile Strength (Longitudinal) as per ASTM D 5147 (N/50mm.)) |
1000.0 |
|
| - (Elongation as per ASTM D 5147 (Longitudinal)) |
1000.0 |
|
| - (Elongation as per ASTM D 5147 (Transverse)) |
1000.0 |
|
| - (Tear Strength(Longitudinal) as per ASTM D 5147) |
1000.0 |
|
| - (Low Temperature Flexibility as per ASTM D 5147) |
3000.0 |
|
| - (Compound Stability at 100 deg. C as per ASTM D 5147) |
3000.0 |
|
| - (Dimensional Stability as per ASTM D 5147(Longitudinal)) |
1000.0 |
|
| - (Dimensional Stability as per ASTM D 5147(Transverse)) |
1000.0 |
|
| - (Tear Strength(Transverse) as per ASTM D 5147) |
1000.0 |
|
|
| 1667 |
National Test House (WR), Mumbai
| Customized Specification for Streseal - Customized Specification for Streseal |
Customized Specification for Streseal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength as per ASTM D 4632(Longitudinal)) |
1000.0 |
|
| - (Tensile Strength as per ASTM D 4632(Transverse)) |
1000.0 |
|
| - (Elongation as per ASTM D 4632(Longitudinal)) |
1000.0 |
|
| - (Elongation as per ASTM D 4632(Transverse)) |
1000.0 |
|
| - (Penetration as per ASTM D 5) |
2000.0 |
|
| - (Softening Point as per ASTM D 36) |
2000.0 |
|
| - (Surface Texture(visual)) |
1000.0 |
|
| - (Water absorption as per ASTM D 5147) |
2000.0 |
|
| - (Top Surfacing(Visual)) |
1000.0 |
|
| - (Mass per Unit area(Polyester reinforcement) as per ASTM D 3776) |
2000.0 |
|
| - (Puncture Resistance test as per ASTM D 5602) |
2000.0 |
|
|
| 1668 |
National Test House (SR), Chennai
| IS 1130 (Marble) (1969) - Marble |
Marble |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1669 |
National Test House (SR), Chennai
| IS 1130 (1969) - Marble (blocks, Slabs And Tiles) |
Marble (blocks, Slabs And Tiles) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1670 |
National Test House (ER), Kolkata
| IS 7098 : Part 1 : 1988 (Reaffirmed Year : 2020), Amendments : 5 - Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage up to and including 1100 V |
Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage up to and including 1100 V |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1.a.i , 15.2.a (Tests on Conductor - Annealing Test (for copper)) |
1000.0 |
|
| 15.1.a.ii , 15.2.b (Tests on Conductor - Tensile Test (for Aluminium)) |
1000.0 |
|
| 15.1.a.iii , 15.2.c (Tests on Conductor - Wrapping Test (for Aluminium)) |
500.0 |
|
| 15.1.a.iv , 15.2.d (Tests on Conductor - Resistance Test) |
2000.0 |
|
| 15.1.b.1 (Test for round steel wire/formed steel wire(strip) armour - Dimensions) |
500.0 |
|
| 15.1.b.2.i (Test for round steel wire/formed steel wire(strip) armour - Tensile Strength) |
1000.0 |
|
| 15.1.b.2.ii (Test for round steel wire/formed steel wire(strip) armour - Elongation at Break) |
1000.0 |
|
| 15.1.b.2.iii (Test for round steel wire/formed steel wire(strip) armour - Torsion test for round wires) |
1000.0 |
|
| 15.1.b.2.iv (Test for round steel wire/formed steel wire(strip) armour - winding test for formed wires) |
1000.0 |
|
| 15.1.b.2.v (Test for round steel wire/formed steel wire(strip) armour - Uniformity of zinc coating) |
1000.0 |
|
| 15.1.b.2.vi (Test for round steel wire/formed steel wire(strip) armour - Mass of zinc coating) |
2000.0 |
|
| 15.1.b.2.vii (Test for round steel wire/formed steel wire(strip) armour - Resistivity) |
2000.0 |
|
| 15.1.c , 15.2.e (Test for thickness of insulation and sheath) |
1000.0 |
|
| 15.1.d.i , 15.2.g (Physical test for insulation - Tensile strength and elongation at breakj) |
1500.0 |
|
| 15.1.d.ii (Physical test for insulation - Ageing in oven) |
2000.0 |
|
| 15.1.d.iii , 15.2.f (Physical test for insulation - Hot set test) |
1000.0 |
|
| 15.1.d.iv (Physical test for insulation - Shrinkage test) |
1000.0 |
|
| 15.1.d.v (Physical test for insulation - Water absorption test (gravimetric))) |
1000.0 |
|
| 15.1.e.i , 15.2.g (Physical tests for outer sheath - Tensile strength and elongation at break) |
1000.0 |
|
| 15.1.e.ii (Physical tests for outer sheath - Ageing in air oven) |
1000.0 |
|
| 15.1.e.iii (Physical tests for outer sheath - Loss of mass in air oven) |
1000.0 |
|
| 15.1.e.iv (Physical tests for outer sheath - Shrinkage test) |
500.0 |
|
| 15.1.e.v (Physical tests for outer sheath - Hot deformation test) |
500.0 |
|
| 15.1.e.vi (Physical tests for outer sheath - Heat shock test) |
500.0 |
|
| 15.1.e.vii (Physical tests for outer sheath - Thermal stability) |
1000.0 |
|
| 15.1.f , 15.2.j (Insulation resistance (Volume resistivity test)) |
2000.0 |
|
| 15.1.g , 15.2.h (High voltage test) |
2000.0 |
|
| 15.1.h (Flammability test) |
500.0 |
|
| 15.1.1.C1.a , 15.1.1.C2.a , 15.2.1.C1.a , 15.2.1.C2.a (Oxygen Index Test (for Category C1 & C2)) |
5000.0 |
|
| 15.1.1.C1.b , 15.1.1.C2.b , 15.2.1.C1.b , 15.2.1.C2.b (Flame retardance test on single cable (for category C1 & C2)) |
5000.0 |
|
| 15.1.1.C1.c , 15.1.1.C2.c , (Flame retardance test on bunched cable) |
5000.0 |
|
| 15.1.1.C1.d , 15.1.1.C2.g (Temperature Index) |
5000.0 |
|
| 15.1.1.C2.e (Smoke density) |
5000.0 |
|
| 15.1.1.C2.f , 15.2.1.C2.d (Test for halogen acid gas evolution) |
5000.0 |
|
| - (Test on 2nd Core) |
2000.0 |
|
| - (Test on 3rd Core) |
2000.0 |
|
| - (Test on 4th Core) |
2000.0 |
|
| - (Test on 5th Core) |
2000.0 |
|
| - (Test on 6th Core) |
2000.0 |
|
| - (Test on 7th core) |
2000.0 |
|
| - (Test on 8th Core) |
2000.0 |
|
|
| 1671 |
National Test House (SR), Chennai
| IS 208 (2020) - Door Handles - Specification ( Sixth Revision ) |
Door Handles - Specification ( Sixth Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Dimensions) |
2000.0 |
|
| 7 (Anodizing) |
2000.0 |
|
| 8.1 (Pencil Hardness Test) |
1000.0 |
|
| 8.2 (Corrosion Test) |
2000.0 |
|
| 8.3 (Quenching Test) |
2000.0 |
|
|
| 1672 |
National Test House (WR), Mumbai
| SMCCustomized Specification For SPRING LOADED SERIVCE CONNECTION BOX - SMC SPRING LOADED SERIVCE CONNECTION BOX |
SMC SPRING LOADED SERIVCE CONNECTION BOX |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Flammability as per UL-94/IS-11731) |
5000.0 |
|
| - (Glow wire test at 960 deg.C as per IS 11000) |
2000.0 |
|
| - (Ball Pressure Test as per IEC-335) |
2000.0 |
|
| - (UV ageing test for 200 hours) |
12000.0 |
|
| - (Water absorption as per IS 13411:1992 Method 1) |
2000.0 |
|
| - (Material Identification) |
1996.0 |
|
| - (Glass Contents by Mass(Min.) as per IS 13410:1992) |
2000.0 |
|
| - (Izod Impact Strength(Notched) as per IS 13410:1992) |
2000.0 |
|
| - (Flexural Strength as per IS 13410:1992) |
2000.0 |
|
| - (Tracking Resistance CTI,Min. as per IS 13410:1992) |
1000.0 |
|
| - (Tensile Strength as per IS 13410:1992) |
4000.0 |
|
| - (Density Of Moulding as per IS 13410:1992) |
1000.0 |
|
| - (Volume Resistivity as per IS 13410:1992) |
1500.0 |
|
| - (Surface Resistivity as per IS 13410:1992) |
1500.0 |
|
| - (Dielectric Strength at 90deg.C in Oil) |
2000.0 |
|
| - (Oxygen Index as per IS 13410:1992) |
4000.0 |
|
|
| 1673 |
National Test House (SR), Chennai
| IS 204 (1992) - Tower Bolts |
Tower Bolts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Dimensions) |
2000.0 |
|
| 7 (Anodizing) |
2000.0 |
|
|
| 1674 |
National Test House (ER), Kolkata
| IS 7014 (1973) - Specification for Length Bars |
Specification for Length Bars |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4 (Length) |
9600.0 |
|
|
| 1675 |
National Test House (SR), Chennai
| IS 2681 (1993) - Non-ferrous metal sliding door bolts (Aldrops) for use with padlocks |
Non-ferrous metal sliding door bolts (Aldrops) for use with padlocks |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Dimensions) |
2000.0 |
|
| 8.2 (Anodizing) |
2000.0 |
|
|
| 1676 |
National Test House (SR), Chennai
| IS 205 (1992) - Non Ferrous Metal Butt Hinges |
Non Ferrous Metal Butt Hinges |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Dimensions) |
2000.0 |
|
| 6.3 (Dimension measurement & Visual Observation) |
2000.0 |
|
| 7.2 (Anodizing) |
2000.0 |
|
|
| 1677 |
National Test House (ER), Kolkata
| IS 11103 (1984) - Specification for Cylindrical Measuring Pins (Size Range from 0.1 mm up to and Including 20 mm) |
Specification for Cylindrical Measuring Pins (Size Range from 0.1 mm up to and Including 20 mm) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Diameter) |
7500.0 |
|
|
| 1678 |
National Test House (ER), Kolkata
| Custom - Used cooked oil |
Used cooked oil |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture Content % by mass) |
1200.0 |
|
| 2 (Density) |
1200.0 |
|
| 3 (Free Fatty Acid) |
1200.0 |
|
| 4 (Kinematic Viscosity at Room Temp) |
1200.0 |
|
|
| 1679 |
National Test House (ER), Kolkata
| CUSTOM - Fly Ash |
Fly Ash |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Loss on Ignition) |
1200.0 |
|
| 2 (CaO) |
1200.0 |
|
| 3 (Fe2O3) |
1200.0 |
|
| 4 (MgO) |
1200.0 |
|
| 5 (Al2O3) |
1200.0 |
|
| 6 (SiO2) |
1200.0 |
|
|
| 1680 |
National Test House (ER), Kolkata
| IRS:TC 30-05 (2006) - Underground railway jelly filled telecom quad cables for signalling & telecom installations |
Underground railway jelly filled telecom quad cables for signalling & telecom installations |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5.1 (Physical tests for conductor - Dimensions) |
500.0 |
|
| 5.7 (Test for thickness of insulation and sheaths) |
1000.0 |
|
| 5.8.2.3 (Physical tests for pe insulation, pe inner sheath, pvc intermediate and outer sheath - Shrinkage Test) |
500.0 |
|
| 5.9.3 (Conductor resistance test) |
1500.0 |
|
| 3.2.4 (Colour of insulated quad test) |
500.0 |
|
| 5.9.1 (High voltage test) |
3000.0 |
|
| 5.9.2.1 & 5.9.2.2 (Insulation Resistance Test) |
3000.0 |
|
| 5.6.1 (Physical test for armour tapes - Dimensions) |
1000.0 |
|
| 5.6.5 (Physical test for armour tapes - Test for closeness of armour) |
1000.0 |
|
| - (Testing on extra core of 24 Quad Cable) |
46000.0 |
|
| - (Testing of each extra core) |
2000.0 |
|
|
