| 1621 |
National Test House (SR), Chennai
| IS 1708(Parts 1-18)1986: RA 2020 - METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER |
METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture content (IS 1708(1):1986)) |
1000.0 |
|
| 2 (Specific gravity (IS 1708(2):1986)) |
500.0 |
|
| 3 (Volumetric Shrinkage (IS 1708(3)1986)) |
1000.0 |
|
| 5 (Static bending strength (IS 1708(5):1986)
1.Fibre stress at limit of proportionality(FS at LP)
2.Equivalent fibre stress at maximum load(MOR)
3.Modulus of Elasticity( M of E)
4.Horizontal shear(HS)stress on neutral plan at LP
5.Horizontal shear stress at maximum load(ML)
6.Wk to LP
7.Wk to ML) |
3000.0 |
|
| 15 (Screw holding power(IS 1708(15):1986)) |
1500.0 |
|
| 8 (Compressive strength-Parallel to grain(IS 1708(8)1986)) |
1500.0 |
|
| 9 (Compressive strength-Perpendicular to grain(IS 1708(9):1986)) |
1500.0 |
|
| 12 (Tensile strength -Parallel to grain(IS 1708(12):1986)) |
2000.0 |
|
| 15 (Nail holding Power (IS 1708(15):1986)) |
1500.0 |
|
| 5 (Static bending strength-Equivalent fibre stress at maximum
load ( modulus of rupture - M of R ) & Modulus of elasticity ( M of E )) |
2000.0 |
|
| custom (Dimension) |
1000.0 |
|
| custom (Shear strength Parallel to Grain (IS 1708 ( Part 12 ) • 1986)) |
1500.0 |
|
|
| 1622 |
National Test House (ER), Kolkata
| IS 13410 (1992) - Glass reinforced polyester sheet moulding compounds(Smc) - Specification |
Glass reinforced polyester sheet moulding compounds(Smc) - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.0 (Glass Content percent by mass) |
3000.0 |
|
| 6.0 (Izod Impact Strength) |
2000.0 |
|
| 6.0 (Tensile Strength) |
2000.0 |
|
| 6.0 (Flexural Strength) |
2000.0 |
|
|
| 1623 |
National Test House (SR), Chennai
| CUS/SR/MECH-49 (2024) - FRP Coated SS Plate |
FRP Coated SS Plate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Peel off test) |
2500.0 |
|
| 2.0 (Shrinkage test) |
2500.0 |
|
|
| 1624 |
National Test House (ER), Kolkata
| IS 2095 : Part 1 (2011) - Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards |
Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3, Table3, 8.1 (Transverse Strength-IS: 2542 (Part 2/Sec 4)) |
4000.0 |
|
| 7.1, Table1 /Table2, 8.1 (Dimensions-IS: 2542 (Part 2/Sec 1)) |
500.0 |
|
| 7.2, 8.2 (Taper Profile-IS 2095 (1):2011) |
2000.0 |
|
|
| 1625 |
National Test House (NWR), Jaipur
| ILC for HDPE pipes NTH/NR/XR/ILC/2024/13 - ILC for HDPE Pipes |
ILC for HDPE Pipes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Melt Flow Index as per IS 2530) |
- |
|
| - (Density as per IS 7328) |
- |
|
| - (Thickness as per IS 4984:2016) |
- |
|
| - (Elongation as per annexure "H" of IS 4984) |
- |
|
| - (Carbon Black Content as per IS 2530) |
- |
|
|
| 1626 |
National Test House (NWR), Jaipur
| ILC for PVC Pipe NTH/NR/XR/ILC/2024/12 - ILC for PVC Pipes |
ILC for PVC Pipes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Ash Content as per IS 4985:2021) |
- |
|
| - (Density as per IS 12235) |
- |
|
| - (Vicat Softening Point as per IS 4985:2021) |
- |
|
| - (Opacity as per IS 4985:2021) |
- |
|
|
| 1627 |
National Test House (NWR), Jaipur
| Customized Specification for ILC of RPPT Lab - Paper/Rubber/Plastics/Textiles |
Paper/Rubber/Plastics/Textiles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (ILC of Paper/Rubber/Plastics/Textiles) |
- |
|
|
| 1628 |
National Test House (SR), Chennai
| TI/SPC/OHE/CW/0971 - Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod)
. |
Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod)
. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.1.1 (Visual Examination) |
1000.0 |
|
| 9.1.2 (Dimension) |
2000.0 |
|
| 9.1.3 (Weight) |
1500.0 |
|
| 9.1.4 (Resistance/km at 20 Deg. C) |
3000.0 |
|
| 9.1.5 (Brinell Hardness) |
2000.0 |
|
| 9.1.6 (Tensile Strength) |
2000.0 |
|
| 9.1.7 (Elongation at Gauge Length 200 mm) |
1000.0 |
|
| 9.1.8 (Bending Test) |
1000.0 |
|
| 9.1.9 ((Cu+Ag)) |
2000.0 |
|
| 9.1.10 (Micro structure Examination) |
3000.0 |
|
|
| 1629 |
National Test House (SR), Chennai
| RDSO/TI/SPC/OHE/CAT(Cd-Cu)/0971 - Technical specification for Cadmium Copper for Overhead Electrical Traction-Cu-Cd |
Technical specification for Cadmium Copper for Overhead Electrical Traction-Cu-Cd |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1.1 (Chemical composition, percent by mass (Cu+Ag)) |
5000.0 |
|
| 8.2.1 (Visual examination) |
1000.0 |
|
| 8.2.3 (Measurement of diameter of individual wires and stranded conductors, mm) |
2000.0 |
|
| 8.2.4 (Measurement of weight of wire and conductor, kg/km) |
1000.0 |
|
| 8.2.5 (Measurement of Lay length and lay ratio of each layer of stranded conductor) |
3000.0 |
|
| 8.2.6 (Measurement of Electrical resistance of wire and stranded conductor) |
5000.0 |
|
| 8.2.7 (Tensile test on wires -3 wires) |
3000.0 |
|
| 8.2.7 (Tensile test on wires -7 wires) |
3500.0 |
|
| 8.2.7 (Tensile test on wires -19 wires) |
9500.0 |
|
| 8.2.7 (Tensile test on wires -37 wires) |
18500.0 |
|
| 8.2.8 (Wrapping test on wires) |
1000.0 |
|
|
| 1630 |
National Test House (ER), Kolkata
| B269-000-02-42-PCS-0001 Rev. 3 (2021) - F-15 Two components Epoxy phenolic coating cured with polyamine adduct hardener
EIL SPECIFICATION FOR SURFACE
PREPARATION AND PROTECTIVE COATING SYSTEM |
F-15 Two components Epoxy phenolic coating cured with polyamine adduct hardener
EIL SPECIFICATION FOR SURFACE
PREPARATION AND PROTECTIVE COATING SYSTEM |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume solids %) |
2000.0 |
|
| 2 (DFT per coat in microns) |
500.0 |
|
| 3 (Theoretical covering capacity meter square/coat/litre) |
500.0 |
|
| 4 (weight per litre of mix paint
Kg/litre) |
500.0 |
|
| 5 (Touch dry at 30 Deg C) |
500.0 |
|
| 6 (Hard dry at 30Deg C) |
500.0 |
|
| 7 (Full cure 30 Deg C(for immersion /high temp service)) |
500.0 |
|
| 8 (Over-coating interval) |
1000.0 |
|
| 9 (Pot life at 30 Deg C(For two components paint)) |
1000.0 |
|
| 10 (Adhesion (ASTM D 4541) MPa) |
3000.0 |
|
| 11 (Temperature Resistance
at 150 Deg C Method A ASTM D 2485) |
2500.0 |
|
|
| 1631 |
National Test House (NWR), Jaipur
| IS 1500 : Part 2 (2021) - Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines |
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Hardness) |
4000.0 |
|
|
| 1632 |
National Test House (NR), Ghaziabad
| IS 8360:2022 (2022) - Fabricated Polyethylene Fittings for Water Supply — Specification |
Fabricated Polyethylene Fittings for Water Supply — Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Visual Appearance) |
1000.0 |
|
| 7.1 (Outside Diameter) |
1000.0 |
|
| 7.1 (Wall Thickness) |
1000.0 |
|
| 7.2 (Laying Length) |
1000.0 |
|
| 8.1 (Internal Pressure Creep Rupture Test) |
5000.0 |
|
| 8.2 (Tensile Strength for Butt Fusion) |
2000.0 |
|
|
| 1633 |
National Test House (NR), Ghaziabad
| IS 8008:2022 (2022) - Injection Moulded/Machined Polyethylene Fittings for Water Supply — Specification |
Injection Moulded/Machined Polyethylene Fittings for Water Supply — Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Outside Diameter) |
1000.0 |
|
| 8 (Visual Appearance) |
1000.0 |
|
| 9.1 (Wall Thickness) |
1000.0 |
|
| 10.1 (Internal Pressure Creep Rupture Test) |
5000.0 |
|
| 10.2 (Carbon Black Content) |
2000.0 |
|
| 10.2 (Carbon Black Dispersion) |
1000.0 |
|
| 10.3 (Melt Flow Rate) |
2000.0 |
|
| 10.4 (Density) |
1000.0 |
|
| 10.5 (Oxidation Induction Time) |
2000.0 |
|
| 10.6 (Overall Migration) |
5000.0 |
|
|
| 1634 |
National Test House (NR), Ghaziabad
| IEC 60099 - 4 (2014) - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.2.6 (Lighting Impulse Voltage Test) |
50000.0 |
|
| 8.2.8 (Power Frequency Voltage Test (Wet)) |
20000.0 |
|
|
| 1635 |
National Test House (NR), Ghaziabad
| IS/IEC 61439-1 (2020) - Low-voltage switchgear and controlgear assemblies
Part 1: General rules |
Low-voltage switchgear and controlgear assemblies
Part 1: General rules |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl No. 10.10 (Temperature-rise) |
30000.0 |
|
|
| 1636 |
National Test House (ER), Kolkata
| EN 14399 Part-5 (2015) - High-strength structural bolting assemblies for Preloading –.Part 5: Plain washers |
High-strength structural bolting assemblies for Preloading –.Part 5: Plain washers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Dimension) |
2000.0 |
|
| 4 & Table-3 (Mechanical Properties Vickers Hardness) |
2000.0 |
|
| 0 (Chemical Composition) |
2000.0 |
|
| 4.0 (Zinc coating thickness as per ISO 10684) |
2000.0 |
|
|
| 1637 |
National Test House (ER), Kolkata
| EN 14399 : Part 9 (2009) - High-Strength Structural Bolting Assemblies For Preloading - Part 9: System HR Or HV - Direct Tension Indicators For Bolt And Nut Assemblies |
High-Strength Structural Bolting Assemblies For Preloading - Part 9: System HR Or HV - Direct Tension Indicators For Bolt And Nut Assemblies |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Internal Diameter) |
500.0 |
|
| 3.1 (Protrusion internal Diameter) |
500.0 |
|
| 3.1 (Protrusion tangential Diameter) |
500.0 |
|
| 3.1 (Height of Protrusion) |
500.0 |
|
| 3.1 (Height over Protrusion) |
500.0 |
|
| 3.1 (Material Thickness) |
500.0 |
|
| 3.1 (External Diameter) |
500.0 |
|
| 3.1 (Dimensions as per EN 14399 - 9.) |
2500.0 |
|
| 3.2 (Mechanical Properties Vickers Hardness) |
2000.0 |
|
|
| 1638 |
National Test House (SR), Chennai
| IEC 62271-102:2018 (2018) - High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches. |
High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.106 (Mechanical Endurance Test M0 Class on DBCR Isolator (1000 Operation)) |
20000.0 |
|
| 7.5 (Temperature Rise Test as per IEC62271-102:2018) |
20000.0 |
|
| Cl.no 7.2.7.3 of IS/IEC 62271-102 (Lightning Impulse Voltage Dry Test) |
50000.0 |
|
| Cl.no 7.2.7.2 of IS/IEC 62271-102 (Power Frequency Voltage Dry Test) |
2500.0 |
|
| Cl.no 7.2.7.2 of IS/IEC 62271-102 (Power Frequency Voltage Wet Test) |
2500.0 |
|
|
| 1639 |
National Test House (ER), Kolkata
| IS 277 (2018) - Galvanized Steel Sheets (Plain and Corrugated) |
Galvanized Steel Sheets (Plain and Corrugated) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 0 (Uniformity of Zinc Coating) |
2000.0 |
|
| 14 ,15 (Dimensions) |
1000.0 |
|
| 5.1 (Carbon, % by mass) |
500.0 |
|
| 5.1 (Manganese, % by mass) |
500.0 |
|
| 5.1 (Sulphur, % by mass) |
500.0 |
|
| 5.1 (Phosphorous, % by mass) |
500.0 |
|
| 8.1 (Tensile Strength) |
2000.0 |
|
| 8.1 (Yield Stress) |
1000.0 |
|
| 8.1 (Elongation Percent) |
1000.0 |
|
| 8.2 (Bend Test) |
1000.0 |
|
| 12 (Freedom from Defects) |
1000.0 |
|
| 5.1 (Titanium) |
500.0 |
|
| 7 (Mass of Zinc Coating) |
2000.0 |
|
| 3.3 (Thickness of Sheet) |
1000.0 |
|
| 3.3 (Thickness of sheet (uncoated), mm) |
1000.0 |
|
|
| 1640 |
National Test House (ER), Kolkata
| IS 1891 : Part 1 (2021) - CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision) |
CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.0 (Construction) |
1000.0 |
|
| 7.0 (Tensile Strength of Top Cover) |
1000.0 |
|
| 7.0 (Tensile Strength of Bottom Cover) |
1000.0 |
|
| 7.0 (Elongation at Break of Top Cover) |
500.0 |
|
| 7.0 (Elongation at Break of Bottom Cover) |
500.0 |
|
| 7.0 (Abrasion Loss of Top Cover) |
1500.0 |
|
| 7.0 (Abrasion loss of Bottom Cover) |
1500.0 |
|
| 8.0 (Freedom from Defects) |
1000.0 |
|
| 14.0 (Width) |
1000.0 |
|
| 14.0 (Cover Thickness) |
1000.0 |
|
| 15.0 (Full Thickness Tensile Strength, Longitudinal Direction) |
2500.0 |
|
| 15.0 (Full Thickness Tensile Strength, Transverse Direction) |
2500.0 |
|
| 15.0 (Full Thickness Elongation at Break, Longitudinal Direction) |
500.0 |
|
| 15.0 (Full Thickness Elongation at Break, Transverse Direction) |
500.0 |
|
| 15.0 (Elongation at Reference Load, Longitudinal Direction) |
1000.0 |
|
| 16.0 (Adhesion Strength Between Plies) |
3000.0 |
|
| 16.0 (Adhesion Strength Between Cover and Carcass) |
2000.0 |
|
| Firm's request (Hardness (Shore A)) |
1000.0 |
|
| Firm's request (Flammability Characteristics with Cover (ISO 340)) |
4000.0 |
|
| Firm's request (Flammability Characteristics without Cover (ISO 340)) |
4000.0 |
|
|
| 1641 |
National Test House (WR), Mumbai
| Customer Specification -Cable - Customer Specification -Cable |
Customer Specification -Cable |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Type test for cable) |
20000.0 |
|
| - (Acceptance test-cable) |
10000.0 |
|
| - (Routine test-cable) |
12000.0 |
|
| 4 (Acceptance Tests - AAAC/ACSR Conductors) |
8000.0 |
|
| 5 (Acceptance Tests - ACSR Conductor-37 wire (Wolf, Panther) and other sizes) |
10000.0 |
|
| 6 (Acceptance Tests - Insulators Discs/ Post/Pin (11/22/33kV)) |
8000.0 |
|
| 7 (Acceptance Tests - Insulators Shackle / Pin (0.4 kV)) |
6000.0 |
|
| 8 (Acceptance Tests- LT/HT Aerial Bunched Cables of various sizes) |
8500.0 |
|
| 9 (Acceptance Tests- LT PVC cables of various size-1 Core) |
8500.0 |
|
| 10 (Acceptance Tests- LT PVC cables of various size-2 Core) |
12000.0 |
|
| 11 (Acceptance Tests- LT PVC cables of various size-3/3.5/4 Core) |
14000.0 |
|
| 12 (Acceptance Tests- LT XLPE Cables of various sizes-1/2 core) |
10000.0 |
|
| 13 (Acceptance Tests- LT XLPE Cables of various sizes-3/3.5/4 core) |
12000.0 |
|
| 14 (Acceptance Tests- HT XLPE Cables of various sizes) |
12000.0 |
|
|
| 1642 |
National Test House (WR), Mumbai
| Customer specification-Functional tests - Customer specification-Functional tests |
Customer specification-Functional tests |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Functional test, Operational test, Discrete test) |
25000.0 |
|
| Sl1 (Performance Tests) |
50000.0 |
|
| Sl2 (Operational Checks) |
50000.0 |
|
| Sl3 (Technical Analysis) |
25000.0 |
|
| Sl4 (Specs verification) |
25000.0 |
|
|
| 1643 |
National Test House (SR), Chennai
| CUS/SR/MECH-48 - Bi-Cycle - Girls |
Bi-Cycle - Girls |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Dimensions and visual examination) |
20000.0 |
|
| 2.0 (Chemical composition, % by mass) |
5000.0 |
|
|
| 1644 |
National Test House (SR), Chennai
| CUS/SR/MECH-47 - Bi-Cycle - Boys |
Bi-Cycle - Boys |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Dimensions and visual examination) |
20000.0 |
|
| 2.0 (Chemical composition, % by mass) |
5000.0 |
|
|
| 1645 |
National Test House (SR), Chennai
| IS 2386 (Part I) (1963) - Method of Test for Aggregates for Concrete
Part I Particle Size and Shape |
Method of Test for Aggregates for Concrete
Part I Particle Size and Shape |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.4.1 (Dimension calibration of thickness gauge) |
4000.0 |
|
| 5.4.1 (Dimension calibration of length gauge) |
4000.0 |
|
| 1 () |
- |
|
|
| 1646 |
National Test House (SR), Chennai
| IS 2386 : Part 1 (1963) - Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape |
Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 () |
- |
|
|
| 1647 |
National Test House (SR), Chennai
| IEC 60840 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) |
Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Acceptance tests as per IEC 60840) |
37500.0 |
|
|
| 1648 |
National Test House (NR), Ghaziabad
| IRSM 46 (2020) - Filler Wire for MIG/MAG Welding |
Filler Wire for MIG/MAG Welding |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Testing of Welding Electrode) |
17000.0 |
|
| - (Chemical Composition) |
3000.0 |
|
|
| 1649 |
National Test House (WR), Mumbai
| ILC for HDPE pipes NTH/NR/XR/ILC/2024/13 - ILC for HDPE Pipes |
ILC for HDPE Pipes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Melt Flow Index as per IS 2530) |
- |
|
| - (Density as per IS 7328) |
- |
|
| - (Thickness as per IS 4984:2016) |
- |
|
| - (Elongation as per annexure "H" of IS 4984) |
- |
|
| - (Carbon Black Content as per IS 2530) |
- |
|
|
| 1650 |
National Test House (WR), Mumbai
| ILC for PVC Pipe NTH/NR/XR/ILC/2024/12 - ILC for PVC Pipes |
ILC for PVC Pipes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Ash Content as per IS 4985:2021) |
- |
|
| - (Density as per IS 12235) |
- |
|
| - (Vicat Softening Point as per IS 4985:2021) |
- |
|
| - (Opacity as per IS 4985:2021) |
- |
|
|