NTH - Management Information System

Search by Standard No.

Reset

3863 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1591

National Test House (ER), Kolkata

CUSTOM-28-ER-MCALI - Calibration of Eyepiece Reticle

Calibration of Eyepiece Reticle

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	3000.0

1592

National Test House (WR), Mumbai

IS 7328:2020 (2020) - Specification for Polyethylene Material for Moulding and Extrusion

Specification for Polyethylene Material for Moulding and Extrusion

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Density)	2000.0
5.0 (Melt Flow Rate)	2000.0

1593

National Test House (WR), Mumbai

Custom for IS:7328 - Custom for IS:7328

Custom for IS:7328

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1594

National Test House (ER), Kolkata

CUSTOM - Gear / engine/ Lubricating oil

Gear / engine/ Lubricating oil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Kinematic Viscosity at 40 Degee C)	1200.0
2 (Kineamtic Viscosity at 100 Degree C)	1200.0
4 (Pour point, Dg C)	1200.0
5 (Total Acidity)	1200.0
6 (Flash Point , Cleaveland Open Cup)	1200.0
7 (Density)	1200.0
8 (Specific Gravity)	1200.0
9 (Clarity)	1200.0
7 (Density)	1200.0
8 (Specific Gravity)	1200.0
9 (Clarity)	1200.0
8 (Specific Gravity)	1200.0
8 (Copper Strip corrosion test)	1200.0

1595

National Test House (ER), Kolkata

RDSO/SPN/TC/109/2023 Ver. 1.0 (2023) - Specification of Integrated Communication System for Tunnels

Specification of Integrated Communication System for Tunnels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.0 & 10.1 (Visual inspection)	5000.0
3.1.1 & 3.1.3 (Performance Test)	54000.0
7.2.2.1 Sl.no. (i) & Sl no.(iii), 7.2.2.2 Sl.No.1,2,3,4,5 (Climatic and environmental requirement)	70000.0
7.3 (Endurance test)	15000.0
7.2.2.1 Sl.no. (i) & Sl no.(iii), 7.2.2.2 Sl.No.6 (Climatic and environmental requirement)	30000.0

1596

National Test House (ER), Kolkata

JIS A 5528 (2006) - Hot Rolled steel sheet Piles

Hot Rolled steel sheet Piles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Phosphorus)	500.0
4 (Sulphur)	500.0
5 (Tensile strength)	2000.0
5 (Yield /Proof stress)	1000.0
5 (Elongation)	1000.0
6 & Table 4 (Shapes, Dimensions and their tolerances)	1000.0
6 (Unit Mass)	1000.0

1597

National Test House (WR), Mumbai

FCO 1985 (as amended upto November 2023) - FCO 1985 (as amended upto October 2024)

FCO 1985 (as amended upto October 2024)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1598

National Test House (SR), Chennai

IS 516(Part 4):2018 - HARDENED CONCRETE — METHODS OF TEST PART 4 SAMPLING, PREPARING AND TESTING OF CONCRETE CORES

HARDENED CONCRETE — METHODS OF TEST PART 4 SAMPLING, PREPARING AND TESTING OF CONCRETE CORES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Equivalent Cube strength, N/sq mm)	5000.0
8 (Equivalent Cube compressive strength N/sqmm-Single core)	1700.0

1599

National Test House (SR), Chennai

IS 1367 (2002) - TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 8 PREVAILING TORQUE TYPE STEEL HEXAGON NUTS — MECHANICAL AND PERFORMANCE PROPERTIES

TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 8 PREVAILING TORQUE TYPE STEEL HEXAGON NUTS — MECHANICAL AND PERFORMANCE PROPERTIES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6, Table 4 (Vickers Hardness, HV 30)	2000.0

1600

National Test House (SR), Chennai

IS 1783 : Part 2 (2014) - Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Dimensions, mm)	2000.0
8.1 (Yield stress, MPa- IS 513 (Part 1) : 2016)	1000.0
8.1 (% Elongation - IS 513 (Part 1) : 2016)	1000.0
8.1 (Tensile strength, MPa- IS 513 (Part 1) : 2016)	1000.0
7 (Chemical composition, % - IS 513 (Part 1) : 2016)	2500.0
11 (Thickness, mm - IS 513 (Part 1) : 2016)	1000.0
8.3 (Hardness - IS 513 (Part 1) : 2016)	2000.0
TDS-1 (Drum Crimp Width, mm)	1000.0
TDS-2 (Thickness of Paint Coating (DFT), Micron)	2000.0

1601

National Test House (ER), Kolkata

IS 516 : Part 5 : Sec 3 (2021) - Hardened Concrete - Methods of Test Part 5 Non-Destructive Testing of Concrete Section 3 Carbonation Depth Test ( First Revision )

Hardened Concrete - Methods of Test Part 5 Non-Destructive Testing of Concrete Section 3 Carbonation Depth Test ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Carbonation Depth Test IS 516 (Part5)/Sec3:2021)	5000.0

1602

National Test House (WR), Mumbai

IS 516 : Part 5 : Sec 3 (2021) - Hardened Concrete - Methods of Test Part 5 Non-Destructive Testing of Concrete Section 3 Carbonation Depth Test ( First Revision )

Hardened Concrete - Methods of Test Part 5 Non-Destructive Testing of Concrete Section 3 Carbonation Depth Test ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Carbonation Depth Test IS 516 (Part5)/Sec3:2021)	5000.0

1603

National Test House (ER), Kolkata

IS 4664 (1986) - Specification for pulp board (First Revision)

Specification for pulp board (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (General)	500.0
4.2 (Thickness)	1000.0
4.3 (Substance)	1000.0
4.5 (Burst index)	2000.0
4.5 (Ash)	2000.0
4.5 (pH)	1000.0
4.5 (Moisture content)	1000.0
4.5 (Brightness)	2000.0

1604

National Test House (SR), Chennai

IS 3575 (1993) - Bitumen drums - Specification (Third Revision)

Bitumen drums - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Dimensions, mm)	2000.0
8.1 (Yield stress, MPa - IS 513 (Part 1) : 2016)	1000.0
8.1 (Tensile strength, MPa - IS 513 (Part 1) : 2016)	1000.0
8.1 (% Elongation - IS 513 (Part 1) : 2016)	1000.0
7 (Chemical composition, % - IS 513 (Part 1) : 2016)	2500.0
11 (Thickness, mm - IS 513 (Part 1) : 2016)	1000.0
8.3 (Hardness - IS 513 (Part 1) : 2016)	2000.0
TDS-1 (Drum Crimp Width, mm)	1000.0
TDS-2 (Thickness of Paint Coating (DFT), Micron)	2000.0

1605

National Test House (ER), Kolkata

14276 (2016) - Cement Bonded Particle Boards — Specification

Cement Bonded Particle Boards — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Finish)	500.0
7 (Dimensions and Tolerances)	1000.0
10.3 (Density)	1000.0
10.4 (Moisture Content)	1000.0
10.5 (Water Absorption)	1000.0
10.6 (Swelling in water)	1000.0
10.7 (Modulus of Rupture (MOR))	1500.0
10.8 (Modulus of Elasticity (MOE))	1500.0
10.9 (Tensile Strength perpendicular surface)	1500.0
10.10 (Screw withdrawal strength)	1000.0

1606

National Test House (NR), Ghaziabad

NTH/NR/RPPT/HDPE Membrane (2023) - HDPE Membrane for Waterproofing

HDPE Membrane for Waterproofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Puncture Resistance)	3000.0
Firm's Requirement (Tensile Strength)	2000.0
Firm's Requirement (Elongation)	2000.0
Firm's Requirement (Peel Adhesion to Concrete)	3000.0
Firm's Requirement (Thickness)	1000.0

1607

National Test House (ER), Kolkata

CUSTOM - CPWD SOIL

CPWD SOIL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Organic Content (Loss on Ignition))	1200.0
2 (pH)	1200.0
3 (Soluble Sulphates)	1200.0
4 (Chloride Content)	1200.0

1608

National Test House (ER), Kolkata

NTH ER PAINT LAB 2023 - NTH ER PAINT LAB 2023

NTH ER PAINT LAB 2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Mix Density ( 30 Degree) gm/cc IS 101 part 1 sec7)	500.0
2 (Volume solids % IS 101 Part 8 sec 6)	1500.0
3 (Drying Time Hard Dry IS 101PArt 3 sec 1)	500.0
4 (Pot Life/Gel Time (Relevant IS/ASTM) or ASTM D2471)	1200.0
5 (Shor A Hardness (14 Days) ASTM D 2240)	1500.0
6 (Tensile Strength, 7 Days (Relevant IS/ASTM))	5000.0
7 (Elongation at break % 14 Days (ASTM D 412))	2000.0
8 (Bond Strength to Concreate 14 days ,Mpa ASTM D 4541)	5000.0
10 (Compressive Strength Mpa ASTM C 579 a)For 1 Day b)For 7 Days)	10000.0
12 (Flexural Strength ASTM C 580 7 Days)	5000.0
13 (Shore D Hardness ASTM D 2240 7 Days)	1500.0
9 (Tear Strength 14 days N/mm2 ASTM D 624)	3500.0
6 (Fluorescent Ultraviolet (UV) Lamp Exposure for 100 hours UVA-340 nm)ASTM G 154)	5000.0
7 (Salt spray test for 96 hours ASTM B 117)	5000.0
8 (PH)	500.0
15 (Salt spray test 1440 hours (ISO 9227))	72000.0
16 (Adhesion test(Cross cut test) ISO 2409)	5000.0
17 (QUV test for 1400 hours (ASTM G 154-B))	70000.0
18 (Impact resistance test)	5000.0
6 (Tensile Strength, 7 Days (Relevant IS/ASTM))	5000.0

1609

National Test House (WR), Mumbai

IS 14276 (2017) - Cement Bonded Particle Boards

Cement Bonded Particle Boards

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1610

National Test House (ER), Kolkata

Customer specification Ash content (0) - Customer specification Ash content

Customer specification Ash content

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ash content at 750 Deg C for 01 hour)	1200.0

1611

National Test House (ER), Kolkata

15337 (2003) - Coal tar based anticorrosion tape for protection of underground mild steel pipelines - Specification

Coal tar based anticorrosion tape for protection of underground mild steel pipelines - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 4 (clause 4.5) (Solubility of Coal tar based tape in petrol (Annexure C of IS 15337 : 2003))	2000.0
Table 4(Clause 4.5) (Adhesion test on applied tape on steel pipe)	2000.0

1612

National Test House (ER), Kolkata

IS 15778 (2007) - Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Diameter)	1000.0
7.1.1 (Diameter at any point )	1000.0
7.1.2 (Wall Thickness)	1000.0
7.1.3 (Length)	1000.0
9.1 (Visual Appearance)	1000.0
9.2 (Opacity)	2000.0
9.3 (Effect on water)	2000.0
9.4 (Reversion Test)	2000.0
9.5 (Vicat Softening Temperature)	1500.0
9.6 (Density)	1000.0
10.1 (Hydrostatic Characteristics)	5000.0
10.4 (Flattening Test)	2000.0
10.3 (Resistance to External Blows)	2000.0
10.4 (Flattening Test)	2000.0
10.5 (Tensile Strength )	2000.0

1613

National Test House (ER), Kolkata

CUSTOM/COIR MAT (2023) - CUSTOM/COIR MAT

CUSTOM/COIR MAT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Thickness)	1000.0
2.0 (GSM)	1000.0
3.0 (Tensile Strength of Polymer Net (Machine direction))	1000.0
4.0 (Tensile Strength of Polymer Net (Transverse direction))	1000.0

1614

National Test House (ER), Kolkata

11890:1987 - Specification for High Purity Aluminium Ingots For Remelting for Special Applications

Specification for High Purity Aluminium Ingots For Remelting for Special Applications

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Aluminium, Percent)	1200.0
6.1 (Copper, Percent)	1200.0
6.1 (Silicon, Percent)	1200.0
6.1 (Iron, Percent)	1200.0
6.1 (Manganese, percent)	1200.0
6.1 (Magnesium, Percent)	1200.0
6.1 (Zinc, Percent)	1200.0
6.1 (Titanium + Vanadium)	2400.0
6.1 (Gallium, percent)	1200.0
6.1 (Other elements)	1200.0

1615

National Test House (ER), Kolkata

IS 1708/IS 3629/IS 4970/IS 1331 - Methods of small clear specimens of Timber/Structural timber in building/keys for identification of timber/Specification for cut sizes of timber [All Timber]

Methods of small clear specimens of Timber/Structural timber in building/keys for identification of timber/Specification for cut sizes of timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Identification of Timber(IS 4970-1973))	5000.0
7 (Moisture content(IS 1708(1)1986))	1000.0
6 (Specific gravity(IS 1708(2)1986))	1000.0
3 (Static bending strength-M of R ( IS 1708(5)1986))	1500.0
2 (Compressive strength perpendicular to grain(IS 1708( 9)1986))	1500.0
1 (Compressive strength parallel to grain(IS 1708(8)1986))	1500.0
4 (Screw holding power(IS 1708(15)1986))	1500.0
5 (Nail holding power(IS 1708(15)1986))	1500.0
9 (Timber grade(IS 1331-1971))	3000.0
8 (Identification of Timber(IS 4970-1973))	5000.0
7 (Moisture content(IS 1708(1)1986))	1000.0
6 (Specific gravity(IS 1708(2)1986))	1000.0
3 (Static bending strength-M of R ( IS 1708(5)1986))	1500.0
2 (Compressive strength perpendicular to grain(IS 1708( 9)1986))	1500.0
1 (Compressive strength parallel to grain(IS 1708(8)1986))	1500.0
4 (Screw holding power(IS 1708(15)1986))	1500.0
5 (Nail holding power(IS 1708(15)1986))	1500.0
9 (Timber grade(IS 1331-1971))	3000.0
8 (Identification of Timber(IS 4970-1973))	5000.0
7 (Moisture content(IS 1708(1)1986))	1000.0
6 (Specific gravity(IS 1708(2)1986))	1000.0
3 (Static bending strength-M of R ( IS 1708(5)1986))	1500.0
2 (Compressive strength perpendicular to grain(IS 1708( 9)1986))	1500.0
1 (Compressive strength parallel to grain(IS 1708(8)1986))	1500.0
4 (Screw holding power(IS 1708(15)1986))	1500.0
5 (Nail holding power(IS 1708(15)1986))	1500.0
9 (Timber grade(IS 1331-1971))	3000.0

1616

National Test House (ER), Kolkata

1542 (1992) - Sand for Plastering

Sand for Plastering

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Grading of Sand, (IS 2386 Part 1)))	2000.0
5.2 (Fineness Modulus of sand (IS 2386 (Part 1) from gradation))	500.0
4.4.1 (Water Required for Gauging (IS 1727 cl 9.5.3), %)	1000.0
6.2 (Bulk density-loose)	500.0
6.2 (Bulk density-Compacted)	500.0
6.2 (Water absorption)	1000.0
6.2 (Specific gravity)	500.0
5 (Grading of Sand, (IS 2386 Part 1)))	2000.0
4.3 (Deleterious Materials, (a) Clay, Silt and Dust as per IS 2386 (Part 2) and (b) Organic impurities as per IS 2386 (Part -2 ))	2000.0

1617

National Test House (SR), Chennai

IS 17505(Part-1) :2021 - Resistance to Fire alone Test as per E.7.3 of IS 17505(Part-1) :2021

Resistance to Fire alone Test as per E.7.3 of IS 17505(Part-1) :2021

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
E 7.3 (Fire alone Test as per IS 17505(Part-1):2021)	5000.0

1618

National Test House (SR), Chennai

on the lines of IS 17908:2023 - Fibre cement sheet-light weight concrete sandwich panels

Fibre cement sheet-light weight concrete sandwich panels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Physical Properties (Dimensions, Density, Bending strength-three point loading ,Impact test, Tensile strength, Screw withdrawal strength))	29000.0

1619

National Test House (NWR), Jaipur

IS 3589 (2001) - Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Carbon)	500.0
8.1 (Manganese)	1000.0
8.1 (Sulphur)	500.0
8.1 (Phosphorus)	500.0
9.2 (Flattening test)	1000.0
9.1 (Tensile Strength)	1000.0
9.1 (Elongation)	1000.0
9.1 (Yield Strength)	1000.0
11 (Weight)	1000.0
11 (Dimension (Diameter))	1000.0

1620

National Test House (ER), Kolkata

IS 18316 (2023) - Hot Rolled And Cold Rolled Steel Strips Intended For Processing Of Semifully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel

Hot Rolled And Cold Rolled Steel Strips Intended For Processing Of Semifully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Freedom from defect)	1000.0
9.2 & 10.1 (Thickness)	500.0
9.3 (Crown)	500.0
9.5 (Edge camber)	500.0
7 (Carbon)	500.0
7 (Manganese)	500.0
7 (Sulphur)	500.0
7 (Phosphorus)	500.0
7 (Silicon)	500.0
7 (Aluminium)	500.0
9.4 & 10.2 (Width)	500.0