NTH - Management Information System

Search by Standard No.

Reset

4078 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1531

National Test House (NWR), Jaipur

IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose

Steel Wire Ropes for General Engineering Purpose

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Diameter)	1000.0
5 (Breaking Force)	3000.0

1532

National Test House (NWR), Jaipur

IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose —Specification

Steel Wire Ropes for General Engineering Purpose —Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1533

National Test House (NWR), Jaipur

ISO 4427 (Part 1 & 2) - Polyethylene pipes and fittings for water supply

Polyethylene pipes and fittings for water supply

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.1.13 (Wall Thickness)	1000.0
4.2.1 (Colour)	1000.0
7.2 (Hydrostatic strength at 20 deg.c for 100 hours)	12000.0
7.2 (Hydrostatic strength at 80 deg.c for 165 hours)	20000.0
8.2 (Elongation at Break)	2000.0
8.2 (Longitudinal reversion)	2000.0
8.2 (Melt Mass Flow Rate(MFR))	2000.0
8.2 (Oxidation Induction Time(OIT))	2000.0
3.1.1.5 (Mean Outside Diameter)	1000.0
3.1.1.8 (Ovality)	1000.0

1534

National Test House (NWR), Jaipur

15466 (2004) - RUBBER SEALS FOR HYDRAULIC GATES

RUBBER SEALS FOR HYDRAULIC GATES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.0 (Tests)	10000.0
4.0 (Elongation at break (IS:3400 Part-1))	2000.0
4.0 (Tensile Strength (IS:3400 Part-1))	2000.0
4.0 (Mass of water absorbed (IS:3400 Part-6))	2000.0

1535

National Test House (NER), Guwahati

IS 8419 : Part 1 (1977) - Requirements for filtration equipment: Part 1 filtration media - Sand and gravel

Requirements for filtration equipment: Part 1 filtration media - Sand and gravel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.1 (Silica)	1000.0
3.1.4 (Loss on Ignition)	1000.0
3.1.2 (Percentage of volume of sand (clay, slit, loam etc.))	1000.0
3.1.3 (Acid Soluble Matter)	1000.0
4.1.3 (Acid Soluble Matter)	1000.0
4.1.1 (Presence of Inpurities (%)(clay, sand, loam and organic))	1000.0

1536

National Test House (ER), Kolkata

RDSO/SPN/TC/98/2011 Rev 0 (2011) - RDSO Specification for Surge Protective Devices for Telecommunication Equipments

RDSO Specification for Surge Protective Devices for Telecommunication Equipments

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 5.9 (Nominal Voltage Operation)	3000.0
Cl 5.9 (Maximum continuous operating voltage)	3000.0
Cl. 5.9 (Voltage Protection Level)	5000.0
Cl. 5.9 (Temperature Conditioning-Cold Test: Temperature: -10 deg C, Duration: 4 hours, Electrical Loading of Device:230V,50 Hz.)	5000.0
Cl. 5.9 (Temperature Conditioning-Dry Heat Test, Temperature: +60 deg C,Duration: 4 hours, Electrical Loading of Device: 230V,50 Hz)	5000.0
Cl. 5.9 (Temperature Conditioning-Damp Heat Test: Temperature: +60 deg C,Relative Humidity:95%,Duration: 4 hours, Electrical Loading of Device: 230V,50 Hz)	5000.0
Cl. 5.9 (Visual Indication)	2000.0
Cl. 5.9 (Degree of Protection-IP20(Protection against Electric Shock): Test Finger Diameter: 12 mm, Applied Force: 10 N, Application Point: Every possible accessible position.)	7500.0
Cl. 5.9 (Fire retardant Test as per UL94(Resistance to Flame & ignition):Flammability Test:)	5000.0

1537

National Test House (ER), Kolkata

Custom - Cement content

Cement content

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Cement Content)	5000.0
2 ((Cement : sand : aggregate) ratio)	5000.0

1538

National Test House (ER), Kolkata

MAINTENANCE INSTRUCTION NUMBER TI/MI/0050 - Rev. 1 - MAINTENANCE INSTRUCTION NUMBER TI/MI/0050 - Rev. 1

MAINTENANCE INSTRUCTION NUMBER TI/MI/0050 - Rev. 1

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.0 (Breaking Strength)	2000.0
5.0 (Retention of breaking strength after UV exposure)	2000.0
5.0 (UV exposure (144 hrs))	7200.0

1539

National Test House (WR), Mumbai

IS 4853 (1982) - Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)

Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 4853 (Radiography)	2000.0

1540

National Test House (WR), Mumbai

Customized Specification For UPVC Fins 50mmx100mm. - Customized Specification For UPVC Fins 50mmx100mm.

Customized Specification For UPVC Fins 50mmx100mm.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Density on the lines of ASTM D 792)	1000.0
- (Vicat Softening Point on the lines of ASTM D 1525)	2000.0
- (Heat reversion test @100 Deg. 60 min. on the lines of EN 479:2018)	2000.0
- (Tensile Strength as per ASTM D 638)	2000.0
- (Flexural Modulus as per ASTM D 790)	3000.0
- (Limiting Oxygen Index)	5000.0

1541

National Test House (SR), Chennai

CUS/SR/MECH-50 (2024) - Perforated Metal Sheet

Perforated Metal Sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimension, mm)	2000.0
2.0 (Percentage of perforated area, %)	2000.0
3.0 (Mass of Zinc coating)	2000.0
4.0 (Powder Coating Thickness, micron)	2000.0

1542

National Test House (ER), Kolkata

BP 22494 Rev No. 07 - Epoxy Glass Mat Laminated Sheets & Components Fire Retardant.

Epoxy Glass Mat Laminated Sheets & Components Fire Retardant.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Specific Gravity)	1000.0
9.1 (Tensile Strength)	2000.0
9.2 (Cross Breaking Strength)	2000.0
9.4 (Compression Strength - Proof)	2000.0
9.5 (Splitting Load)	2000.0
8.3 (Specific Gravity)	1000.0
9.1 (Tensile Strength)	2000.0
9.2 (Cross Breaking Strength)	2000.0
9.4 (Compression Strength - Proof)	2000.0
9.5 (Splitting Load)	2000.0

1543

National Test House (NR), Ghaziabad

IS 15450 (2022) - Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 9.1 (Table 2) (Outside Diameter)	500.0
Clause 9.1 (Table 2) (Out of Roundness)	500.0
Clause 9.1 (Table 2) (Wall Thickness)	500.0
Clause 9.1 (Table 2) (Outer PE Layer Thickness)	500.0
9.3 (Length of Pipe)	500.0
10 (Visual Appearance)	1000.0
11.1 (Density @27°C)	1000.0
11.2 (Melt Flow Rate)	2000.0
11.3 (Overall Migration)	5000.0
11.4 (Oxidation Induction Time)	2000.0
11.5 (Carbon Black Content)	2000.0
11.5 (Carbon Black Dispersion)	1000.0
11.9 (Apparent Tensile Strength)	5000.0
11.10 (Burst Pressure Test)	2000.0
11.11.1 (Short Term Hydrostatic Test)	5000.0
11.11.2 (Long Term Hydrostatic Test)	5000.0

1544

National Test House (WR), Mumbai

IS 12701:1996 - Rotational Moulded Polyethylene Water Storage Tanks

Rotational Moulded Polyethylene Water Storage Tanks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per table 1 (Minimum Bottom Thickness)	1000.0
As per table 1 (Minimum Wall Thickness)	1000.0
5.4 (Wall Thickness above effective height)	1000.0
7.2 (Resistance to Impact)	2000.0
7.4 (Tensile Strength)	2000.0
7.5 (Flexural Modulus)	2000.0
7.1 (Resistance to deformation)	2000.0

1545

National Test House (WR), Mumbai

AAR (1994) - Clean Silica Sand

Clean Silica Sand

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Test for presence of impurities (Clay, looms, mica and other foreign matters))	500.0
2.1 (Solubility in HCl in 24 hours, %)	1000.0
2.1.1 (Determination of Silica, %)	2000.0
3.1 (Caking Test)	1000.0
3.2 (Gradation Test, % passing)	2000.0

1546

National Test House (WR), Mumbai

Customized Specification For APP Modified Bituminous Sheet Membrane - Customized Specification For APP Modified Bituminous Sheet Membrane

Customized Specification For APP Modified Bituminous Sheet Membrane

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness as per EN 1849-1)	1000.0
- (Tensile Strength in Transverse Direction as per EN 12311-1)	2000.0
- (Elongation in Longitudinal Direction as per EN 12311-1)	1000.0
- (Elongation in Transverse Direction as per EN 12311-1)	1000.0
- (Tear Strength in Longitudinal direction as per ASTM D 5147)	2000.0
- (Tear Strength in Transverse direction as per ASTM D 5147)	2000.0
- (Softening Point as per ASTM D 36)	2000.0
- (Flexibility at low temperature(-2deg. C) as per EN 1109)	2000.0
- (Flow resistance @120 deg.C after 2 hours as per EN 1110)	2000.0
- (Water absorption as per ASTM D 5147)	2000.0

1547

National Test House (WR), Mumbai

Customized Specification for General Purpose Silicon Sealant - Customized Specification for General Purpose Silicon Sealant

Customized Specification for General Purpose Silicon Sealant

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Density at 25 Deg.C in gm./cc.)	1000.0
- (Tensile Strength(Kg./cm2))	2000.0
- (Elongation at Break(%))	2000.0
- (Shore A Hardness)	2000.0
- (Dielectric Strength)	3000.0

1548

National Test House (NER), Guwahati

IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Nominal Mass of strand - IS 14268: 2022.)	1500.0
6.1 (Nominal Cross- Sectional Area of Strand- IS 14268: 2022.)	1000.0
6.1 (Nominal Diameter of strand- IS 14268: 2022.)	1000.0
6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.)	1000.0
6.2 (Length of lay of Strand- IS 14268: 2022.)	1000.0
4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.)	1000.0
4.1.2 (Carbon (As per IS 7904:2018))	500.0
4.1.2 (Sulphur (As per IS 7904:2018))	500.0
4.1.2 (Phosphorus (As per IS 7904:2018))	500.0
4.1.2 (NIckel (As per IS 7904:2018))	500.0
4.1.2 (Chromium (As per IS 7904:2018))	500.0
4.1.2 (Manganese (As per IS 7904:2018))	500.0
4.1.2 (Silicon (As per IS 7904:2018))	500.0
4.1.2 (Copper (As per IS 7904:2018))	500.0
4.1.2 (Molybdenum (As per IS 7904:2018))	500.0
4.1.2 (Aluminium (As per IS 7904:2018))	500.0
4.1.2 (Sulphur+Phosphorus (As per IS 7904:2018))	500.0
6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.)	1000.0

1549

National Test House (NWR), Jaipur

IS 1239 : Part 1 (2004) - Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1.1 (Chemical composition (Carbon))	625.0
6.1.1 (Chemical composition (Manganese))	625.0
6.1.1 (Chemical composition (Sulphur))	625.0
6.1.1 (Chemical composition (Phosphorus))	625.0
12 (Galvanizing (Mass of Zinc coating))	2000.0
12 (Galvanizing (Uniformity of Zinc coating))	1000.0
14.2 (Bend test on tube (upto and including 50 mm NB))	1000.0
8.1 (Mass per meter)	1000.0
8 (Dimension (Outside diameter), mm.)	1000.0
8 (Dimensions (Thickness), mm.)	1000.0
14.1.1(b)(1) (% Elongation)	1000.0
14.3 (Flattening Test on tube above 50 mm NB)	1000.0
14.1 (Tensile Strength)	2000.0
14.1.1 (% Elongation on gauge length of 5.65 x Sq. root area)	1000.0
14.1.1(a) (% Elongation)	1000.0
6.1.1 (Chemical composition (As per annexure))	3000.0

1550

National Test House (NR), Ghaziabad

IS 1397 (2020) - Kraft Paper for Packing and Wrapping — Specification ( Third Revision )

Kraft Paper for Packing and Wrapping — Specification ( Third Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5 (Moisture Content)	1000.0
5.5 (pH)	1000.0
5.5 (Burst Index)	2000.0
5.5 (Tear Index(MD))	1000.0
5.5 (Tear Index (CD))	1000.0
5.5 (Tensile Index (MD))	1000.0
5.5 (Tensile Index(CD))	1000.0
5.5 (Folding Endurance)	1500.0
5.5 (Cobb Test)	1000.0
5.5 (Cobb Test)	1000.0

1551

National Test House (WR), Mumbai

IS 17545:2021 - WHITE CEMENT BASED POLYMERIC PUTTY

WHITE CEMENT BASED POLYMERIC PUTTY

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Form and Condition)	500.0
4.3 (Consistency)	500.0
4.4 (Lead Restriction-ASTM D3335-85a.)	1000.0
4.5 Table, 1, (i) (Average Tensile adhesion strength@ 14days-Annex B)	2000.0
4.5, Table 1, (ii) (Water retentivity-Annex C)	1000.0
4.5, Table 1, (iii) (Initial Setting time-Annex D)	250.0
4.5, Table 1, (iii) (Final Setting time-Annex D)	250.0
4.5, Table 1, (iv) (Polymer content(based on loss on ignition)-Annex E)	1000.0
4.5, Table 1, (v) (Degree of whiteness-Annex B of IS 8042)	2000.0
4.5, Table 1, (vi) (Cement content-Annex B of IS 5410)	1000.0
4.6 Table 2 (28 days Compressive strength-IS 4031(6))	1000.0
custom (Potlife)	1000.0
4.5 Table 1,V (Degree of whiteness)	1500.0
custom (Fineness)	1000.0
custom (Bulk density)	1000.0
custom (Water absorption)	1000.0

1552

National Test House (NER), Guwahati

15388 (2003) - Silica Fume Specification (Custom requirements)

Silica Fume Specification (Custom requirements)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4, Table 1(i) (Silica SiO2 (IS 1727), percent by mass)	2000.0
4, Table 1(ii) (Moisture Content, percent by mass)	800.0
4, Table 1(iii) (Loss on ignition (IS 1727), percent by mass)	1000.0
4, Table 1(iv) (Alkalies as Na2O, (IS 4032), percent)	1000.0
5, Table 2(ii) (Oversize particle retained on 45 micron IS sieve (IS 1727), percent)	1000.0
5, Table 2(iv) (Compressive Strength at 7 days as per cent of control sample (IS 1727), %)	3000.0
- - (Specific Gravity [IS 2386(Part 3)])	1000.0
- - (Bulk Density [IS 2386 (Part 3)], g/cc)	1000.0

1553

National Test House (WR), Mumbai

IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY

WHITE CEMENT BASED POLYMERIC PUTTY

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (FORM &CONDITION)	100.0
4.3 (Consistency)	100.0
4.4 (Lead Restriction ( as metallic lead))	1000.0
4.5 Table 1(i) (Tensile adhesion strength (avg. of min 3 readings) @14 days, N/mm2,)	2500.0
4.5 Table 1(ii) (Water retentivity, percent)	1000.0
4.5 Table 1(iii) (Initial Setting time-Annex D in minutes)	200.0
4.5 Table 1(iii) (Final Setting time-Annex D in minutes)	200.0
4.5 Table 1(iv) (Polymer content (based on loss on ignition), percent by mass)	1000.0
4.5 Table 1(vi) (Cement content, percent Annex B of IS 5410)	1200.0
4.6 Optional requirement (Compressive strength, 28 days in N/mm2 (IS 4031 (Part 6)))	3000.0
4.5 Table 1(v) (Degree of whiteness, percent)	1200.0

1554

National Test House (WR), Mumbai

Customized Specification for Waste Container(Dust Bin)(Dust Bin) - Customized Specification for Waste Container(Dust Bin)

Customized Specification for Waste Container(Dust Bin)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Material Identification)	2000.0
- (Tensile Strength at Break as per ASTM D 638)	2000.0
- (Elongation at Break as per ASTM D 638)	2000.0
- (Volume capacity(Ltrs))	1000.0
- (Density as per ASTM D 792)	1000.0
- (Ball Drop test @ 1Kg. from 0.3 M height(3times at different locations)on the lines of IS 12701:1996)	2000.0

1555

National Test House (WR), Mumbai

None - Association of American Railboard ( Silica Sand)

Association of American Railboard ( Silica Sand)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Solubility)	1000.0
- (Silica content)	1500.0

1556

National Test House (WR), Mumbai

1865 (1991) - Iron Castings with Spheroidal or Nodular Graphite- Specification

Iron Castings with Spheroidal or Nodular Graphite- Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Tensile Strength as per IS 1608 Part 1 or relevant standard test method)	1000.0
12.1 (0.2 percent proof stress ( Grade Specified in Table 1 of IS 1865) - Test method as per IS 1608 Part-1)	1000.0
12.1 (Percentage of Elongation ( Grade Specified in Table 1 of IS 1865) - Test Method as per IS 1608 Pat-1)	1000.0
12.2 (Impact Test carried out V-Notch Charpy Test as per IS 1757 ( Clause 12.2.1, 12.2.2. and 13.3.1 Table 3 and 4 of IS 1865))	5000.0
13.2 (Brinell Hardness Test as per IS 1500 Part-1 ( Specified in Annexure-A of IS 1865))	2000.0
A-5 (Microstructure as per IS 7754 ( Specification in Annexure A-5 of IS 1865))	3500.0
6 (Visual Examination as per IS 1865, Clause.61. and 6.2 with customer specified drawing)	1000.0
8 (Visual Examination as per IS 1865 Cl.8.1 and 8.2)	1000.0
0 (Dimension Measurement of Cast and Finished Product as per customer specified drawing with tolerances)	1000.0
0 (Visual Examination of Finished Product as per customer specification)	1000.0

1557

National Test House (NR), Ghaziabad

IRC SP 81 (2008) - Tentative Specification for Slurry Seal and Micro surfacing

Tentative Specification for Slurry Seal and Micro surfacing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 3 (Gradation)	2000.0
Table 2 (Water Absorption)	1000.0
Table 2 (Soundness with Sodium Sulphate)	2000.0

1558

National Test House (WR), Mumbai

None - Custom- Non Flammable Adhesive (Gen Chem)

Custom- Non Flammable Adhesive (Gen Chem)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Consistency)	1000.0
- (Coverage)	1000.0
- (Odour)	500.0
- (Wet Strength)	4500.0
- (Shear Strength)	4500.0
- (Fire Resistance)	3000.0
- (Drying Time)	1000.0
- (Colour)	500.0

1559

National Test House (NR), Ghaziabad

IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision)

Hot dip galvanized stay strand - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Breaking Force of Single Wire)	2000.0
7 (Freedom from defect)	1000.0
4 (Sulphur)	500.0
4 (Phosphorus)	500.0
8.1 (Wrapping Test of wire)	1000.0
9.1 (Breaking Force of Strand)	3000.0
9.1 (Elongation of Strand)	1000.0
8.1 (Wire Diameter)	1000.0
9.2 (Mass of Zinc Coating)	2000.0

1560

National Test House (ER), Kolkata

NCD 1435 (-) - NCD 1435 EPOXY RED OXIDE SHOP PRIMER

NCD 1435 EPOXY RED OXIDE SHOP PRIMER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Preliminary Examination IS101 Part 1 /Sce 2 ,1987)	500.0
2 (Relative consistency Efflux time immediately after mixing by ford cup no 4 at 27+/-2 deg C in seconds IS 101 Part 1 /Sce 2 ,1989)	1200.0
3 (Application properties & finish IS 101 Part 1 /Sce 2 ,1987)	1200.0
4 (Drying time, hrs a) Surface Dry IS 101)	500.0
5 (Drying time, hrs a) Hard Dry IS 101)	500.0
6 (Flexibility and adhesion( 7 days drying) IS 101 Part 5 /Sce 2 ,1988)	1500.0
7 (Dry film thickness(DFT) , microns per coat IS 101 Part 3 /Sce 2 ,1989)	1500.0
8 (Flash point (mixed material ) in minutes IS 101 Part 1 /Sce 6 ,1987)	1500.0
9 (Pot life Hrs, AS per APPENDIX A)	1000.0
10 (Percent pigment IS 101 Part 8 /Sce 2 1986)	2500.0
11 (Percent volatile matter ,IS 101-1986 Part 2 /Sce 2)	1500.0
12 (Weight in kg per ten litre IS 101-1986 Part 1 /Sce 7)	1500.0
13 (Resistance to corrosion under condition of condensation for a period of 14 days ( one coat on grit blasted MS panel) after 7 days of curing IS 101 Part 6 /Sce 1 1988)	4000.0
14 (Resistance to sea water under condition of cathodic protection for 6 weeks APPENDIX C)	10000.0