NTH - Management Information System

Search by Standard No.

Reset

4062 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3691

National Test House (WR), Mumbai

IS 2074 (2015) - Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification

Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6, xii (Keeping properties)	5000.0
5.6,xi (Accelerated storage stability test)	200.0
5.6,x.c (Resistance to salt spray)	500.0
5.6,x.a (Resistance to humidity)	2500.0
5.6,ix (Volume solids)	200.0
5.6,viii (Flash point)	500.0
5.6,vii.b (Flexibility and adhesion: Scratch hardness (load 1000g))	100.0
5.6,vii.a (Flexibility and adhesion:Bend test (with 6.25 mm dia mandrel and in type 1 apparatus))	100.0
5.6,vi (Colour)	50.0
5.6,v (Fineness of grind, microns)	100.0
5.6,iv.b (Gloss, 60º)	100.0
5.6,iv.a (Finish)	100.0
5.6,iii.b (Drying: hard dry)	100.0
5.6,iii.a (Drying: Surface dry)	100.0
5.6,ii (Mass, kg/10litre)	200.0
5.6,i. b (Viscosity by Ford cup No. 4 at 27 ± 2°C)	200.0
5.6,i. a (Consistency)	200.0
5.5 (Lead Restriction)	200.0
5.3 (Compatibility with thinner)	200.0
5.1.2 (Volatile vehicle)	200.0
5.1.1.b (Synthetic red oxides of iron red oxide (as Fe2O3))	1000.0
5.1.1.a (zinc oxide)	500.0
5.1.1.a (chromic anhydride)	1000.0
5.1.a (Pigment, percent by mass)	1200.0

3692

National Test House (ER), Kolkata

ASM Vol.11 (2002) - Metallographic examination-Failure investigation ( minimum)

Metallographic examination-Failure investigation ( minimum)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASM (Failure Analysis)	25000.0

3693

National Test House (ER), Kolkata

IS 1608 : Part 1 (2018) - Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Tensile Test with sample preparation)	4000.0
14 (Tensile Test without sample preparation)	3000.0

3694

National Test House (ER), Kolkata

IS 1586 : Part 1 (2025) - Metallic Materials - Rockwell Hardness Test - Part 1 Test Method

Metallic Materials - Rockwell Hardness Test - Part 1 Test Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0

3695

National Test House (ER), Kolkata

IS 1500 : Part 1 (2019) - Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0

3696

National Test House (ER), Kolkata

IS 4270 (2001) - Steel tubes used for water wells specification (Third Revision)

Steel tubes used for water wells specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Outside diameter)	3000.0
7 (Weight in kg/m)	1000.0
6.2 (Flattening)	1000.0
6.1 (% Elongation)	1000.0
6.1 (Yield Strength)	1000.0
6.1 (Tensile Strength)	1000.0

3697

National Test House (ER), Kolkata

IS 4923 (2017) - Hollow steel sections for structural use - Specification (Third Revision)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.2 (Elongation, %)	1000.0
15.2 (Yield Strength, MPa)	1000.0
15.2 (Tensile Strength, MPa)	1000.0
9.1 (Dimension, mm)	1000.0
9.1 (Weight, kg/m)	1000.0
7.1 (Sulphur, % by mass)	500.0
7.1 (Phosphorus, % by mass)	500.0

3698

National Test House (ER), Kolkata

IS 1501 (2002) - Method For Vickers Hardness Test for Metallic Materials

Method For Vickers Hardness Test for Metallic Materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1501 (Case depth)	4000.0
IS 1501 (Hardness)	1000.0

3699

National Test House (ER), Kolkata

IS 513 : Part 1 (2016) - Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Yield stress)	1000.0
8.2 (Cupping Test)	3000.0
8.3 (Hardness Test)	2000.0
11 (Thickness)	1000.0
8.1 (Tensile strength)	1000.0
8.1 (% Elongation)	1000.0
8.4 (Bend Test)	1000.0
7 (Chemical composition (Carbon))	625.0
7 (Chemical composition (Manganese))	625.0
7 (Chemical composition (Sulphur))	625.0
7 (Chemical composition (Phosphorus))	625.0

3700

National Test House (ER), Kolkata

IS 6003 (2010) - Indented Wire For--Prestressed Concrete â€”

Indented Wire For--Prestressed Concrete â€”

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 (Elongation)	1000.0
7.2 (Proof Stress)	1000.0
7.1 (Tensile strength)	3000.0
6.1.2 (Mass)	1500.0
5.1 (Diameter)	1000.0
7.3 (Reverse Bend Test)	2000.0
7.2 (Proof Stress)	1000.0

3701

National Test House (WR), Mumbai

IS 164 (2015) - Ready mixed paint for road marking - Specification (Second Revision)

Ready mixed paint for road marking - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6.2.1 (Volatile Organic Compounds (VOC): (IS 101 (Part 2/Sec 1) and IS 101 (Part 2/Sec 2)))	3000.0
xii (Keeping properties (IS 101 (Part 6/Sec 2)))	5000.0
xi (Mass in kg/10 litre, (IS 101 (Part 1/Sec 7)))	500.0
x (Flash point (IS 101 (Part 1/Sec 6)))	600.0
ix (Residue on sieve, Max, (IS 101 (Part 8/Sec 1)))	500.0
viii-b (Resistance to wear a) For Grade 2 (as refer in IS 164))	1000.0
viii-a (Resistance to wear a) For Grade 1 (As refer in IS 164))	1000.0
vii (Recoating property (As refer in IS 164))	600.0
vi (Resistance to bleeding (As refer in IS 164))	500.0
v (Wet Opacity (IS 101 (Part 4/Sec 1)))	600.0
iv (Colour (IS 101 (Part 4/Sec 2)))	500.0
iii (Finish (IS 101 (Part 3/Sec 4)))	500.0
ii (Consistency (Annex D))	500.0
i (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1)))	500.0
5.5 table 1 i (Drying time, Max a) Surface dry (IS 101 (Part 3/Sec 1)))	500.0
5.4 (Lead Restriction, Max, (IS 101 (Part 8/Sec 5)))	1200.0
5.3 (Durability (Annex C) 25 days)	2000.0
5.2 (Applications (Annex B))	500.0

3702

National Test House (WR), Mumbai

IS 299 (2012) - Alumino - Ferric - Specification (Fifth Revision)

Alumino - Ferric - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (pH (of 5 percent aqueous solution),)	1000.0
4.2 (Water soluble aluminium compounds (as Al2O3))	1000.0
4.2 (Soluble iron compound (as Fe))	1000.0
4.2 (Insouble matter)	1000.0
4.2 (Free acidity (As H2SO4), Basicity ( as Al2O3),)	1000.0

3703

National Test House (SR), Chennai

IS 456 (2000) - Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision)

Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (pH)	500.0
5.4 (Volume (in ml) of 0.02 (N) H2SO4 required for Neutralization of 100 ml water using mixed indicator.)	500.0
5.4 (Volume (in ml) of 0.02 (N) NaOH required for Neutralization of 100 ml water using phenolphthalein as an indicator.)	500.0
5.4 (Suspended Matter)	500.0
5.4 (Chlorides (as Cl))	1000.0
5.4 (Sulphates ( as SO3))	1000.0
5.4 (Total Inorganic Solids)	500.0
5.4 (Total Organic Solids)	500.0
5.4.1.2 (Test for Compressive strength (IS 516))	4000.0
5.4.1.3 (Initial setting time of test block with sample water compared with distilled water(IS 4031 (Part 5):1988)	2000.0

3704

National Test House (ER), Kolkata

IS 3203 (1982) - Methods of testing local thickness of electroplated coatings (First Revision)

Methods of testing local thickness of electroplated coatings (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3203 (Coating thickness)	2000.0

3705

National Test House (WR), Mumbai

IS 73 (2013) - Paving bitumen - Specification (Fourth Revision)

Paving bitumen - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(vii)b (Ductility dg)	1200.0
6.2(vi) (Softening Point (R&B))	1200.0
6.2(v) (Solubility in TCE)	1200.0
6.2(iv) (Flash Point, cleveland Open cup)	1200.0
6.2 (i) (Penetration,25 dg 100g 5sec 0.1 mm)	1200.0

3706

National Test House (NWR), Jaipur

IS 1061 (2017) - Disinfectant fluids, phenolic type - Specification (Fifth Revision)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3707

National Test House (NWR), Jaipur

IS 13688 (2020) - Packaged Pasteurized Milk — Specification ( Second Revision )

Packaged Pasteurized Milk — Specification ( Second Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Salmonella sp.)	2000.0
8.3 (Listeria monocytogens)	2000.0
8.3 (Aerobic Plate Count)	2000.0
8.3 (Coliform count)	2000.0

3708

National Test House (NWR), Jaipur

IS 7463 (2004) - Wheat flour for use in bakery industry - Specification (Second Revision)

Wheat flour for use in bakery industry - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Granularity)	1000.0
3.3 (Alcoholic acidity (on dry basis))	1000.0
3.3 (Gluten (On dry basis))	1000.0
3.3 (Acid insoluble ash (on dry basis))	1000.0
3.3 (Total ash (on dry basis))	1000.0
3.3 (Moisture)	1000.0
3.3 (Total Bacterial Count)	2000.0
3.3 (Coliform Bacterial Count)	2000.0
3.3 (E-coli)	2000.0
3.3 (Yeast / Mould)	2000.0
3.3 (Rope Spore Count)	2000.0

3709

National Test House (WR), Mumbai

IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.9, xiv (Keeping properties)	5000.0
5.9, viii (Fasteness to light)	5000.0
5.9,xiii (Accelerated storage stability test)	2000.0
5.9,xii (Volume solids percent)	1200.0
5.9,xi (Flash point)	1200.0
5.9,x,b (Flexibility and adhesion:Bend test with 6.25 mm dia Mandre in type 1 apparatus.)	1200.0
5.9,x,a (Flexibility and adhesion: Scratch hardness (Load 1 000 g), )	1200.0
5.9,ix (Resistance to water)	1200.0
5.9,vii (Wet opacity)	1200.0
5.9,vi (colour)	1200.0
5.9,v (Fineness of grind, microns)	1200.0
5.9, iv,b (Gloss, 60º)	1200.0
5.9,iv,a (Finish)	1200.0
5.9,iii b ( Viscosity by B 4 ford cup)	1200.0
5.9,ii (Mass, kg/10litre)	1200.0
5.9.i c (Drying time : Tack free)	1200.0
5.9.i b (Drying time : Hard dry)	1200.0
5.9.i a (Drying time : Surface dry)	1200.0
5.8 (Lead Restrictions)	2500.0
5.7 (Freedom from Yellowing)	1200.0
5.6 (Thinning Properties)	1200.0
5.5 (Skin formation)	1200.0
5.4 (Freedom from Coarse Particles)	1200.0
5.3 (Condtion in container)	1200.0
5.2 (Total Non-volatile content)	1200.0

3710

National Test House (WR), Mumbai

IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision)

Aluminium paints for general purposes - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 ix (Keeping properties)	5000.0
5.3viii (Flash point)	2000.0
5.3 vii (Resistance to humidity under condition of condensation)	3000.0
5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel)	200.0
5.3 v (Wet Opacity)	500.0
5.3 iv (Mass)	200.0
5.3 iii (Finish)	200.0
5.3 ii (Consistency)	200.0
5.3 i (Drying Time Hard dry)	200.0
5.2 (Lead Resistrction)	500.0
5.1.1 (Leafing Value)	1500.0
5.1 (Compostion)	200.0

3711

National Test House (WR), Mumbai

IS 15489 (2013) - Paint, plastic emulsion - Specification (First Revision)

Paint, plastic emulsion - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.12 (Toxic metals such as lead, cadmium, chromium (VI))	3600.0
6.12 (Volatile organic compounds,)	2000.0
6.1 (Keeping properties)	5000.0
6.5 (Mass in kg/10 litre (IS 101 (Part 1/Sec 7)))	500.0
6.11 (Recoating properties, (Annexure J of IS 15489:2013))	2000.0
6.11 (Washability and cleanability (Annexure G of IS 15489:2013))	1900.0
6.11 (Resistance to alkali (Annexure F of IS 15489:2013))	500.0
6.11 (Accelerated storage stability test (Annexure H of IS 15489:2013))	700.0
6.11 (Colour (Annexure E of IS 15489:2013))	100.0
6.11 (Gloss at 60 degree d) Class D, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree c) Class C, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree b) Class B, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree a) Class A (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Finish (Annexure D of IS 15489:2013))	1200.0
6.11 (Consistency (Annexure B of IS 15489:2013))	1200.0
6.11 (Drying time a) Hard dry (Class C and D) (Annexure D of IS 15489:2013))	200.0
6.11 (Drying time a) Hard dry (Class A and B) (Annexure D of IS 15489:2013))	1200.0
6.11 (Drying time a) Surface dry (Class C and D) (Annexure D of IS 15489:2013))	1200.0
6.11 (Drying time a) Surface dry (Class A and B) (Annexure D of IS 15489:2013))	1200.0
6.9 (Lead Restriction)	1000.0
6.8 (Durability Test for Exterior Use Only : Normal Outdoor exposure for 12 Months (Annexure C of IS 15489:2013))	12000.0
6.6 (Opacity (IS 101 ( Part 1/Sec 3)))	1000.0
6.2 (Conditions in the Container)	200.0
6.7 & 6.11 (Fastness to Light (Xenon Arc apparatus for 500 hrs) (IS 101 Part 4/ Sec 3))	15000.0
6.3 (Thinning)	1000.0
6.4 (Application Properties)	700.0
6.1 (Composition)	200.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Please refer annexure)	3600.0
Paint, plastic emulsion - Specification (First Revision) (Coverage)	1200.0
6.8 1. 2 (Accelerated weathering apparatus QUV ( for 21 days))	20000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1000 hr)	60000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1500 hr)	90000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 2000 hr)	100000.0
Paint plastic emulsion (Pull off Adhesion (ASTM D 4541))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Artificial Aging Resistance 500 hrs, ASTM G 154 (Cycle 2 - UVB 313, 4h UV at 60 (±3) °C and 4 h Condensation at 50 (±3) °C))	30000.0
Paint, plastic emulsion - Specification (First Revision) (Brushing Test (IS 101 (Part 1/Sec 4)))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Water Resistance for 7 days (IS 101 (Part 7/Sec 1)))	1500.0
Paint, plastic emulsion - Specification (First Revision) (Toxic Element Mercury (Instrumental Method AAS))	1200.0
Paint, plastic emulsion - Specification (First Revision) (Free Formaldehyde (ASTM D 6191))	5000.0
Paint, plastic emulsion - Specification (First Revision) (Contrast Ratio (ASTM D 2805))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Brightness index (ASTM D 2244))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Whiteness Index (ASTM E 313))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Opacity (Hiding power) - ASTM D 2805)	2000.0

3712

National Test House (SR), Chennai

IS 9730 (2008) - Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Visual Defects Test)	2000.0
7.3 (Non-Stick quality Test)	2000.0
7.4 (Salt-Water Corrosion)	2000.0
7.5.2 (Cross-hatch Test)	1000.0
7.5.3 (Peel Test)	1000.0

3713

National Test House (SR), Chennai

IS 1660 (2024) - Wrought aluminium utensils - Specification (Second Revision)

Wrought aluminium utensils - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimension, mm)	1000.0
8 (Workmanship & finish)	1000.0
7.2 (Test on Handle)	500.0
8.4.1.2 (Finish of the coating)	500.0
4 (Materials of Lid)	3500.0
4 (Materials of utensil)	3500.0
TDS-1 (Weight)	500.0
8.4.2 (Coating thickness test)	2500.0
8.4.3 (Abrasion resistance test)	500.0
8.4.5 (Hardness test)	500.0
8.5 (Non-Stick Unreinforced Plastics Coatings on Domestic Cooking Utensils)	8000.0
8.5 (Coating thickness test as per IS 9730)	2000.0
TDS-2 (Capacity , ml)	500.0

3714

National Test House (ER), Kolkata

ASME ASME (2021) - Performance test ( Plate & electrodes not supplied by NTH)

Performance test ( Plate & electrodes not supplied by NTH)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASME (Welding procedure qualification)	11000.0
ASME (Welder qualification)	5000.0

3715

National Test House (ER), Kolkata

ASME ASME Section IX (2021) - Preparation of welding procedure specification (WPS) as per ASME Section IX

Preparation of welding procedure specification (WPS) as per ASME Section IX

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASME Section IX (Welding procedure Specification)	10000.0

3716

National Test House (ER), Kolkata

ASME Section IX (2019) - 2019 Boiler and Pressure Vessel Code

2019 Boiler and Pressure Vessel Code

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
QW 191 (Radiography Test -Pipe)	3200.0
QW 191 (Radiography Test -Plate)	1200.0

3717

National Test House (ER), Kolkata

IS 16102 : Part 1 (2012) - Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Marking )	1200.0
6 (Interchangeability)	1200.0
7 (Protection against electric shock)	1200.0
8 (Insulation resistance )	2000.0
8 (Electric strength after humidity treatment)	3000.0
9 (Mechanical strength)	1200.0
10 (Cap temperature rise)	2000.0
11 (Resistance to heat)	2000.0
12 (Resistance to ignition)	5000.0
12 (Crepage distance)	600.0
14 ( clearances)	600.0

3718

National Test House (ER), Kolkata

IS 1182 (1983) - Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision)

Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 9.1 (Preparation of Weld assembly for Radiography test)	4000.0

3719

National Test House (SR), Chennai

IS 13395 (2021) - Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Bending Strength)	1000.0
5.3 (Torque Strength)	1000.0
5.4 (Impact Strength)	1000.0
5.5 (Fatigue Resistance)	3000.0
5.6 (Leakage)	1000.0
5.7 (Thermal Insulation)	1000.0
5.8 (Heat Resistance)	2000.0
5.9 (Washing Resistance)	2000.0
5.10 (Burning Resistance)	1000.0

3720

National Test House (SR), Chennai

IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.9, viii (Fasteness to light)	5000.0
5.9,xiii (Accelerated storage stability test)	2000.0
5.9, xiv (Keeping properties)	5000.0
5.9,xii (Volume solids percent)	1200.0
5.9,xi (Flash point)	1200.0
5.9,x,b (Flexibility and adhesion:Bend test with 6.25 mm dia Mandre in type 1 apparatus.)	1200.0
5.9,x,a (Flexibility and adhesion: Scratch hardness (Load 1 000 g), )	1200.0
5.9,ix (Resistance to water)	1200.0
5.9,vii (Wet opacity)	1200.0
5.9,vi (colour)	1200.0
5.9,v (Fineness of grind, microns)	1200.0
5.9, iv,b (Gloss, 60º)	1200.0
5.9,iv,a (Finish)	1200.0
5.9,iii a ( Consistency )	1200.0
5.9,ii (Mass, kg/10litre)	1200.0
5.9.i c (Drying time : Tack free)	1200.0
5.9.i b (Drying time : Hard dry)	1200.0
5.9.i a (Drying time : Surface dry)	1200.0
5.8 (Lead Restrictions)	2500.0
5.7 (Freedom from Yellowing)	1200.0
5.9,iii b ( Viscosity by B 4 ford cup)	1200.0
5.6 (Thinning Properties)	1200.0
5.5 (Skin formation)	1200.0
5.4 (Freedom from Coarse Particles)	1200.0
5.2 (Total Non-volatile content)	1200.0
5.3 (Condtion in container)	1200.0