NTH - Management Information System

Search by Standard No.

Reset

3985 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3661

National Test House (WR), Mumbai

IS 2932 (2013) - Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.9,xiv (Wet opacity, (IS 101 (Part 4/Sec 1)))	1500.0
6.9,xiii (Keeping properties, (IS 101 (Part 6/Sec 2)))	5000.0
6.9,xii (Accelerated storage stability test, (Annex G))	400.0
6.9 (Wet Opacity)	200.0
6.9, (Colour)	300.0
6.9,ix.b (Composition: Phthalic Anhydride Content, (IS 101 (Part 8/Sec 4)))	350.0
6.9,ix.a (Composition: Volume solids, (IS 101 (Part 8/Sec 6)))	2000.0
6.9,viii (Flash point, (IS 101 (Part 1/Sec 6)))	350.0
6.9,vii.b (Flexibility and adhesion:Bend test (with 6.25 mm in type 1 apparatus), (IS 101 (Part 5/Sec 2)))	350.0
6.9,vii.a (Flexibility and adhesion:Scratch hardness (Load 1 000 g), (IS 101 (Part 5/Sec 2)))	1500.0
6.9, vi (Colour, (IS 101 (Part 4/Sec 2)))	350.0
6.9,v (Fineness of grind, microns (IS 101 (Part 3/Sec 5)))	350.0
6.9,iv.b (Gloss, 60º, (IS 101 (Part 3/Sec 4)))	350.0
6.9,iv.a (Finish, (IS 101 (Part 3/Sec 4)))	350.0
6.9,iii.c (Drying time: Tack free, (IS 101 (Part 3/Sec 1)))	350.0
6.9,iii.b (Drying time: Hard dry, (IS 101 (Part 3/Sec 1)))	1000.0
6.9,iii.a (Drying time: surface dry, (IS 101 (Part 3/Sec 1)))	1200.0
6.9,ii (Mass, kg/10litre (IS 101 (Part 1/Sec 7)))	1200.0
6.9,i.b (Viscosity by Ford cup No. 4 at 27 ± 2°C (IS 101 (Part 1/Sec 5)))	350.0
6.9,i. a (Consistency)	1200.0
6.8 (Lead Restriction, (IS 101 (Part 8/Sec 4)))	350.0
6.7.1.3 (Durability: Accelerated weathering test Xenon Arc (700hrs.) (Annex C-4))	35000.0
6.7.1.1 (Durability (Normal outdoor exposure test) 12 Months (Annex C))	10000.0
6.6 (Application Properties)	350.0
6.5 (Thinning Properties)	350.0
6.4 (Skin formation)	350.0
6.3 (Freedom from Coarse Particles)	350.0
6.2 (Condition in Container)	350.0
6.1.1 (Composition)	350.0
6.1.2 (Total Non-Volatile Content (IS 101 Part 8/Sec 2))	500.0
IS 2932 : 2013 (Please refer Annexure)	5000.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Volatile Organic Content (VOC)- IS 101 (Part-2/Sec-1):1988 and IS 101 (Part-2/Sec-2):1986)	4000.0
6.7.1.3 (Durability: Accelerated weathering test QUV apparatus (Lamp Type UV 313, Cycle UV 4 hrs and condensation 4 hrs) Total 360 hrs)	1000.0

3662

National Test House (NWR), Jaipur

IS 9873 : Part 3 (2020) - Safety Of Toys - Migration Of Certain Elements

Safety Of Toys - Migration Of Certain Elements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Selenium(as Se))	1000.0
4.2 (Mercury (as Hg) )	1000.0
4.2 (Lead (as Pb) )	1000.0
4.2 (Chromium (as Cr) )	1000.0
4.2 (Cadmium (as Cd))	1000.0
4.2 (Barium, (as Ba))	1000.0
4.2 (Arsenic (as As))	1000.0
4.2 (Antimony(as Sb))	1000.0

3663

National Test House (NWR), Jaipur

IS 9873 : Part 9 (2017) - Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Di-iso-decyl phthalate (DIDP))	1000.0
3 (Di-iso-nonyl phthalate (DINP))	1000.0
3 (Di-n-octyl phthalate (DNOP))	1000.0
3 (Bis-(2-ethylhexyl) phthalate (DEHP))	1000.0
3 (Benzyl butyl phthalate (BBP))	1000.0
3 (Di-n-butyl phthalate (DBP))	1000.0

3664

National Test House (NWR), Jaipur

IS 14151 : Part 2 (2008) - Irrigation Equipment - Sprinkler Pipes - Specification : Part 2 Quick Coupled Polyethylene Pipes and Fittings (Second Revision)

Irrigation Equipment - Sprinkler Pipes - Specification : Part 2 Quick Coupled Polyethylene Pipes and Fittings (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (IS:2530)	5000.0
7.6 (IS:2530)	5000.0
7.5 (IS:7328)	2000.0
4.1.4 (IS:14151(Part-2))	1000.0
4.1.3 (IS:14151(Part-1))	2000.0
4.1.1 (IS:7328)	2000.0
4.1.2 (IS:2530 (Melt Flow Rate))	2000.0
5.1.1 (IS:14151(Part-2))	500.0
5.1.1 (IS:14151(Part-2))	500.0
4.2 (IS:2530)	1500.0
4.2 (IS:2530)	1000.0
4.1.5 (IS:14151 (Part-2))	2000.0
4.1.5 (IS:14151 (Part-2))	2000.0
4.1.1.1.2 (IS:228/ASTM-E)	1000.0
4.1.1.1.2 (IS:228/ASTM-E)	1000.0
4.1.1.1.2 (IS:228/ASTM-E)	1000.0
4.1.1.1.2 (IS:228/ASTM-E)	1000.0
4.1.1.1.2 (IS:228/ASTM-E)	1000.0
4.1.1.1.2 (IS:228/ASTM-E)	1000.0
4.1.1.1.2 (IS:1586)	1000.0
4.1.1.1.2 (IS:1599)	1000.0
4.1.1.1.2 (IS:1599)	1000.0
4.1.1.1.2 (IS:14151 (Part-2))	1000.0
6.1.3 (IS:14151 (Part-2))	5000.0
6.1.3 (IS:14151 (Part-2))	5000.0
6.1.1 (IS:14151 (Part-2))	5000.0
6.1.2 (IS:14151 (Part-2))	5000.0
1 (Tests IS:14151-Part-2))	16000.0

3665

National Test House (NWR), Jaipur

IS 14151 : Part 1 (1999) - Irrigation Equipment - Sprinkler Pipes - Specification : Part 1 Polyethylene Pipes (First Revision)

Irrigation Equipment - Sprinkler Pipes - Specification : Part 1 Polyethylene Pipes (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 (Fusion Compatibility test)	5000.0
7.3 (IS:14151(Part-1), Elongation at break)	2000.0
7.3 (IS:14151(Part-1), Tensile Strength)	2000.0
7.2 (IS:14151(Part-1))	1000.0
7.1 (IS:14151(Part-1), Quality test)	5000.0
7.1 (7.1 of IS:14151 )Part-1))	5000.0
6 (IS:14151 (Part-1))	1000.0
5 (Dimensions, Outside Diameter, Wall thickness)	2000.0
4.2 (IS:2530)	1000.0
4.2 (4.2 of IS:2530)	1500.0
4.1.2 (IS:2530, Melt Flow Rate)	2000.0
4.1.1 (IS:7328)	2000.0
5.1.1 (IS:14151(Part-1))	500.0
5.1.1 (IS:14151 (Part-1))	500.0
5.1.1 (IS:14151 (Part-1))	500.0

3666

National Test House (NWR), Jaipur

IS 13592 (2013 (RA 2018)) - Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12 (Resistance to Dichloro methane at specified temperature)	2000.0
11 (Water tightness of joints)	5000.0
10.3 (Axial Shrinkage)	2000.0
10.2 (Tensile strength)	2000.0
10.1 (Impact Strength)	2000.0
9 (Resistance to Sulphuric Acid)	2000.0
8.5 (Effect of Sunlight)	3000.0
8.4 (Vicat Softening Temperature)	1500.0
8.3 (Stress relief test)	2000.0
8.2 (Reversion test)	2000.0
8.1 (Visual Appearance)	1000.0
7 (Dimensions (Outside Diameter, Wall thickness))	1000.0
5 (Colour)	500.0
7.1 (Mean Outside Diameter)	500.0
7.1 (Outside diameter at any point)	1000.0
7.1 (Maximum outside diameter at any point)	500.0
7.1 (Minimum outside diameter at any point)	500.0
7.1 (Average Wall Thickness)	500.0
7.3 (Dimension of Grooved Socket)	500.0
7.3.1 (Min. Wall Thickness of Socket on Pipe (S2))	500.0
7.3.1 (Min. Wall Thickness of Socket on Pipe (S3))	500.0
7.3.2 (Inside diameter of socket (D1))	500.0
7.3.2 (Inside diameter of Beading (D2))	500.0
7.3.2 (Length of Beading and Neck (A))	500.0
7.3.2 (Neck of socket (B))	500.0
7.3.2 (Length beyond beading (C))	500.0
7.3 (Dimension of Socket for Solvent Cement)	500.0
7.3 (Min. Wall Thickness of Socket on Pipe (S2))	500.0
7.3 (Socket Depth (C))	500.0
7.3 (Mean Inside diameter of socket at midpoint (D1))	500.0
8.5 (Tensile Strength (Controlled Sample After 1600 Hrs))	1000.0
8.5 (Percentage Change of observed value (Controlled Sample After 1600 Hrs))	1000.0
8.5 (Tensile Strength (After Exposed on Sunlight for 1600 Hrs.))	1000.0
8.5 (Percentage Change of observed value (Exposed Sample by Sunlight after 1600 Hrs))	1000.0
8.6 (Toxic substances extracted from the internal walls of the pipes (in mg/l))	1000.0
8.6 (Lead (first extraction))	500.0
8.6 (Lead (Third extraction))	500.0
8.6 (Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction))	500.0
8.6 (Cadmium (All three extracts))	500.0
8.6 (Mercury (All three extracts))	500.0

3667

National Test House (NWR), Jaipur

IS 15410 (2003) - Containers for packaging of natural mineral water and packaged drinking water - Specification

Containers for packaging of natural mineral water and packaged drinking water - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.6.6 (Water Potability test)	2000.0
4.6.5 (Overall Migration Test for cap)	2000.0
4.6.5 (Overall Migration Test for bottle)	2000.0
4.6.4 (Drop test)	1000.0
4.6.3 (Air Pressure leakage)	1000.0
4.6.3 (Vibration leakage)	2000.0
4.6.3 (Closure leakage)	1000.0
4.6.2 (Transparency test)	2000.0
4.5 (Wall thickness)	1000.0
4.4 (Capacity (Normal and Brimful))	1000.0
4.3 (Workmanship finish & visual Appearance)	1000.0
4.2 (Dimensions)	1000.0

3668

National Test House (NWR), Jaipur

IS 14333 - High Density Polyethylene Pipe For Sewerage -

High Density Polyethylene Pipe For Sewerage -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Carbon Black Contents)	1500.0
8.4 (Melt Flow Rate (IS:14333 & IS:2530))	2000.0
8.6 (Density (IS:14333 & IS:7328))	2000.0
8.2 (Reversion Test (IS:14333 & IS:4984))	1000.0
8.1 (Hydaulic Characteristics)	5000.0
7 (Visual)	100.0
6.2 (Thickness)	1000.0
7.4 (Outside Diameter (IS:14333 & IS:4984))	500.0
8.3 (Carbon Black Dispersion)	1000.0
6.2 (Colour)	100.0
7.1 (Ovality)	200.0
7.1 (Out Of squareness of pipe end (IS:14333))	100.0
7.1 (Visual Appearance)	100.0
8.1.1 (Type test for 165 hrs at 80 deg. C)	5000.0
8.1.1 (Acceptance test for 48 hrs at 80 deg.C)	5000.0
7.4 (Wall Thickness (IS:14333 & IS:4984))	500.0
8.5 (Oxidation Induction Test (IS:14333 & IS:4984))	2000.0
8.8 (Tensile Strength (IS:14333 & IS:4984))	1000.0
8.8 (Elongation at break (IS:14333 & IS:4984))	1000.0

3669

National Test House (NR), Ghaziabad

IS 9537 : Part 2 (1981) - Specification for conduits for electrical installations: Part 2 rigid steel conduits

Specification for conduits for electrical installations: Part 2 rigid steel conduits

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Checking the Maximum outside diameter)	750.0
7.2 (Checking the Minimum outside diameter.)	750.0
7 (Outside Diameter)	500.0
7 (Wall thickness)	500.0
9.3 (Compression Test)	3000.0
13 (External Influence Test (With Seam on the Outside of the Bend))	1000.0
13 (External Influence Test (With Seam on the flank))	1000.0
9.2 (Bending Test (With Seam on the flank))	500.0
9.2 (Bending Test (With Seam on the Outside of flank))	500.0
0.1 (Mass of Zn Coating)	2000.0
0.2 (Free bore test)	1000.0
0.3 (Uniformity of Zn Coating)	1000.0
0.4 (Adhesion Test)	1000.0

3670

National Test House (NWR), Jaipur

IS 4454 : Part 1 (2001) - Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1, 7.1.1, 7.2, 7.2.1 (Carbon)	1000.0
7.1, 7.1.1, 7.2, 7.2.2 (Silicon)	2000.0
7.1, 7.1.1, 7.2, 7.2.3 (Manganese)	1000.0
7.1, 7.1.1, 7.2, 7.2.5 (Phosphorus)	1000.0
7.1, 7.1.1, 7.2, 7.2.4 (Sulphur)	1000.0
7.1, 7.1.1, 7.2, 7.2.6 (Copper)	1000.0
7.1, 7.1.1, 7.2, 7.2.10 (Nb+V+Ti)	3000.0
7.1, 7.1.1, 7.2, 7.2.12 (Cu+Ni+Cr)	3000.0
10.1 (Tensile Strength)	3000.0
9 (Dimensions)	1000.0
7.1, 7.2 (Chemical Composition (C, S, P, Si, Mn, Cu))	3000.0
10.1 (% Elongation)	2000.0
10 (Hardness Test)	2000.0

3671

National Test House (ER), Kolkata

RDSO C-9505 (Revised) (2001) - Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Screw Couplings used on Railway Coaches

Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Screw Couplings used on Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3.2 (Destruction Test)	7500.0
7.3.1 (Impact Test)	7500.0

3672

National Test House (NWR), Jaipur

IS 277 (2018) - Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Mass of Zn coating)	2000.0
8.1 (Uniformity of Zn coating)	1000.0
15 (Dimensions of Corrugated sheet)	1000.0
13 (Mass Test)	1000.0
8.1 (Erischen cupping test)	1000.0
8.1 (Percentage Elongation, %)	1000.0
8.1 (Yield Strength, MPa)	1000.0
8.1 (Tensile strength, MPa)	1000.0
0 (Thickness of Paint coating at side 1)	1000.0
0 (Thickness of Paint coating at side 2)	1000.0
5.1 (Carbon)	500.0
5.1 (Manganese)	500.0
5.1 (Sulphur)	500.0
5.1 (Phosphorus)	500.0
8.2 (Bend Test)	1000.0

3673

National Test House (NWR), Jaipur

IS 398 : Part 2 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Construction (7/30/54 wire construction))	-
12 (Seal, Packing & Markings (7/30/54 wire construction))	-
13.9 (Surface condition test (30 or 54 wire construction))	1000.0
13.9 (d. c. Resistance test)	2000.0
13 (Mechanical parameters for 100 Sqmm)	14000.0
13.6 (Resistance of Aluminium wire (7 wire construction))	5000.0
13.4.1 (Ductility test-Torsion test on steel wires (7 Wire construction))	3500.0
13.7(1) (Galvanizing test-Mass of zinc coating(7wire construction))	2000.0
13.6 (Resistance Test as per Clause 13.6 (Table 1) in Ohms/km)	3000.0
13.11 (Stress-strain test for Complete conductor and Steel core (30 or 54 wire construction))	24000.0
13.7(2) (Galvanizing test-Uniformity of Zinc coating.)	1000.0
13 (Mechanical Tests up to 80 Sqmm)	10000.0
0 (ACSR Conductor Type Tests)	20000.0
0 (ACSR Conductor Acceptance Tests)	14000.0
0 (ACSR Conductor Acceptance & Type Tests)	34000.0
13.3(1) (Breaking load of individual steel wire (7 Wire construction))	3500.0
32 (PT Program on Aluminum Conductor for OH Power Transmission)	-
13 (Mechanical parameters for 100 Sqmm)	14000.0

3674

National Test House (NWR), Jaipur

IS 280 (2006) - Mild steel wire for general engineering purposes (Fourth Revision)

Mild steel wire for general engineering purposes (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Wrapping Test)	1000.0
9.1 (Tensile Strength)	3000.0
9.3 (Bend Test)	1000.0
0 (Mass of Zinc Coating)	2000.0
0 (Uniformity of Coating)	1000.0
13 (Freedom From Defects)	1000.0
7.1 (Wire Diameter)	1000.0

3675

National Test House (ER), Kolkata

DGMS S&T/Tech.Cir.(Approval)No.2 dated Dhanbad 03.06.2010 (2010) - Standard Components and Properties of Rigid Steel Props, Chocks& Cogs to be used in Mines

Standard Components and Properties of Rigid Steel Props, Chocks& Cogs to be used in Mines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Axial Load Test)	1000.0
3.4 (Eccentric Load Test)	1000.0
3.5 (Overload Test)	1000.0
4 (Welding and Weld Test)	11000.0
1 (UTS, Y.S., Elongation)	3000.0
5 (Other Properties and parameters)	12000.0
2 (Chemical Composition)	10000.0

3676

National Test House (SR), Chennai

IS 191 (2007) - Copper - Specification (Fourth Revision)

Copper - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Zinc )	1000.0
7.1 (Tin )	1000.0
7.1 (Lead )	1000.0
7.1 (Bismuth)	1000.0
7.1 (Antimony)	1000.0
7.1 (Arsenic )	2000.0
7.1 (Nickel )	1000.0
7.1 (Sulphur)	1000.0
7.1 (Iron )	1000.0
7.1 (Phosphorus )	1000.0
7.1 (Silver )	1000.0
7.1 (Copper + Silver )	2000.0
7.1 (Selenium)	1000.0

3677

National Test House (NWR), Jaipur

IS 2062 Part 1 (2025) - Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2 (Carbon)	500.0
8.2 (Manganese)	500.0
8.2 (Silicon)	500.0
8.2 (Phosphorus)	500.0
8.2 (Sulphur)	500.0
8 (Chemical Analysis with micro-alloys)	5000.0
15 (Dimensions)	1000.0
12 (Impact Test (For Specified Quality Grade))	5000.0
11 (Bend Test - IS 1599: 2019.)	1500.0
10 (% Elongation - IS 1608 (Part 1): 2022.)	1000.0
10 (Yield Stress - - IS 1608 (Part 1): 2022.)	1000.0
10 (Tensile Strength - IS 1608 (Part 1): 2022)	1000.0

3678

National Test House (WR), Mumbai

IS 3854 (1997) - Switches for domestic and similar purposes - Specification (Second Revision)

Switches for domestic and similar purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17 (Temperature Rise (For 6-10A))	1800.0
16.2 (Electric Strength)	-
16.1 (Insulation Resistance)	-
15.3 (Test for Resistance to Humidity)	500.0
26.1 (Type Test)	16000.0
6 (Rating)	50.0
7 (Classification)	50.0
20 (Mechanical Strength)	100.0
8 (Marking)	-
26.2 (Acceptance Test)	10000.0

3679

National Test House (SR), Chennai

IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Marking, manufacturer's name/trade mark, Visual verification (Naked Eye))	-
6.4 (Durability of Marking)	-
7 (Verification of dimensions with gauges of conduit pipe and Checking of dimensions of the socket end)	2000.0
7.4 (Uniformity of Wall Thickness)	-
8 (Construction)	-
9.2 (Bending Test at room temperature)	2000.0
9.2.1 (Bending test at low temperature)	2000.0
9.3 (Compression Test (Compression under load))	2000.0
9.3.1 (Compression test (Permanent set))	2000.0
9.4 metal (Impact Test)	3000.0
9.5 metal (Collapse Test)	2000.0
10 (Resistance to Heat)	2000.0
11 (Resistance to Burning)	2000.0
12.1 (12.1.1 of IS:9537-Part I Electrical Strength)	2000.0
12 (12.1.2 Of IS:9537-Part I Insulation Resistance)	2000.0

3680

National Test House (ER), Kolkata

IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose —Specification

Steel Wire Ropes for General Engineering Purpose —Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Minimum Breaking Force)	10000.0
4 (Size (Nominal diameter in mm))	500.0
5 (Minimum Breaking Force.)	8000.0

3681

National Test House (NER), Guwahati

IS 2386 : Part 3 (1963) - Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking

Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Surface Moisture)	500.0
3 (Loose Bulk Density)	500.0
3 (Compacted Bulk Density)	500.0
2 (Water Absorption)	1000.0
2 (Speciﬁc Gravity)	500.0

3682

National Test House (NER), Guwahati

IS 516 : Part 4 (2018) - Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Equivalent Cube Strength of Concrete core 1 set IS 516 (Part 4):2018)	4000.0
8 (Equivalent Cube Strength of core samples with preparation, N/mm^2)	5000.0
ASTM (Cement - Aggregate content in Concrete core)	4000.0

3683

National Test House (ER), Kolkata

IS 3832 (2005) - Hand - Operated chain pulley block - Specification (Third Revision)

Hand - Operated chain pulley block - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A (Load Test of Chain Pulley as per Customer Request)	3000.0

3684

National Test House (SR), Chennai

IS 2547 : Part 1 (1976) - Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Setting Time)	500.0
5.2 (Residue on sieving)	500.0
5.2 (Transverse Strength)	1000.0
5.2 (Soundness)	500.0
5.2 (Expansion on setting)	500.0
Table 1 Clause 4.1 (Loss of Ignition , percent by mass)	1000.0
Table 1 Clause 4.1 (Sodium Soluble Salts, expressed as percentage of Na2O)	1000.0
Table 1 Clause 4.1 (Soluble Magnesium salts, expressed as percentage of MgO)	1500.0
Table 1 Clause 4.1 (CaO, Percent by mass)	1500.0
Table 1 Clause 4.1 (SO3, Percent by mass)	1000.0
5.2 (Mechanical resistance of set neat plaster)	500.0

3685

National Test House (SR), Chennai

IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite

Polished Building Stones: Part 1 Granite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Hardness)	2000.0
5 (Porosity)	1000.0
5 (Water absorption)	1000.0
5 (Specific gravity)	1000.0
5 (Dry density )	1000.0
5 (Moisture content)	500.0
4 (Dimensions)	500.0
5 (Compressive strength)	2000.0
5 (Resistance to wear)	4000.0

3686

National Test House (ER), Kolkata

IS 7810 (1999) - Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision)

Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7810 (Radiography)	500.0

3687

National Test House (ER), Kolkata

IS 7739 : Part 5 (1976) - Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7739 (Microstructure)	3000.0

3688

National Test House (ER), Kolkata

IS 6396:2023 (2023) - Steels - Determination of the Depth of Decarburization

Steels - Determination of the Depth of Decarburization

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Measuring decarburized depth of steel)	2000.0

3689

National Test House (ER), Kolkata

IS 7310 : Part 1 (1974) - Approval test for welders to approve welding procedures (plate & electrodes not supplied by NTH)

Approval test for welders to approve welding procedures (plate & electrodes not supplied by NTH)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3.1 (Macro-examination Test)	1000.0
8.2.1a) (Penetrant Testing)	1000.0
8.3.1 (Fillet weld fracture test)	3000.0

3690

National Test House (ER), Kolkata

IS 4163 (2021) - Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams

Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Inclusion rating)	4000.0