NTH - Management Information System

Search by Standard No.

Reset

4394 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3211

National Test House (NR), Ghaziabad

IS 1328 (1996) - Veneered Decorative Plywood -Specification

Veneered Decorative Plywood -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.1.1 (Moisture Content IS 1734 (Part 1):1983)	1000.0
11.1.2 (Water Resistance test--IS 1328:1996)	2000.0
8 (Dimension and tolerances-IS 1328:1996)	1000.0
9 (Finish-IS 1328:1996, Annex C)	1000.0

3212

National Test House (NR), Ghaziabad

IS 2046 (1995) - Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.1 (Surface Finish)	500.0
5.3 (Thickness)	1000.0
5.4.1 (Surface Defects)	1000.0
5.4.2 (Edge Defects)	1000.0
5.4.3 (Broken Corners)	1000.0
5.4.4 (Sanding Defects)	1000.0
5.4.5 (Warping (Flatness))	1000.0
5.4.6 (Length and Width)	1000.0
5.4.7 (Straightness of Edges)	1000.0
5.4.8 (Squareness of laminates)	1000.0
5.5 (Resistance to suface wear)	3000.0
5.5 (Resistance to immersion in Boiling water(mass increase))	1000.0
5.5 (Resistance to immersion in Boiling water(thickness increase))	1000.0
5.5 (Resistance to immersion in boiling water (Appearance))	500.0
5.5.3 (Resistance to Dry Heat at 180 degC.)	2000.0
5.5 (Resistance to Scratching)	2000.0

3213

National Test House (SR), Chennai

Woollen Sweater-Boys Pullover as per TNTBESC Specification (2022) - CUS Spec- Woollen Sweater-Boys Pullover as per TNTBESC Specification

CUS Spec- Woollen Sweater-Boys Pullover as per TNTBESC Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Blend)	150.0
1.2 (Yarn)	150.0
1.3 (Fabric)	150.0
1.4 (Seams and Stitches)	150.0
1.5 (Design)	150.0
1.6 (Size)	150.0
1.7 (Colour)	150.0
1.8 (Cuff and Border)	150.0
1.9 (Freedom from defects)	150.0
2.1 (Wool Content, percent by mass)	1000.0
2.2 (Acrylic Yarn content, percent by mass)	1000.0
2.3 (Wales/inch)	1000.0
2.4 (Course/inch)	1000.0
2.5 (Dimensional Change due to relaxation, percent (Along & Across).)	1000.0
2.6 (Solubility in Alkali, percent by mass)	1000.0
2.7 (pH value of Aqueous Extract)	1000.0
2.8 (Colour Fastness to Light)	2000.0
2.9 (Colour Fastness to washing, a) Change in Colour b) Staining of Adjacent Fabric)	1000.0
2.10 (Colour Fastness to Rubbing (Dry & Wet))	1000.0
2.11 (Colour Fastness to Dry Cleaning- a) Change in Colour b) Staining of Solvent)	1000.0
2.12 (Weight, g/sq.m)	1050.0
3.1 (Width across chest)	300.0
3.2 (Length of Pullover)	300.0
3.3 (Length of Sleeves)	300.0
3.4 (Width of opening at armhole)	300.0
3.5 (Width across shoulder)	300.0
3.6 (Bottom border depth)	300.0
3.7 (Width at bottom)	300.0
3.8 (Cuff Depth)	300.0
3.9 (Cuff Width)	300.0
3.10 (Width of neck opening)	300.0
3.11 (Depth of neck opening)	300.0
3.12 (Width of Welt)	300.0

3214

National Test House (SR), Chennai

RDSO SPECIFICATION NO. WD-01-HLS-94 - Spring Steel Rod/Bar as per RDSO SPECIFICATION NO. WD-01-HLS-94

Spring Steel Rod/Bar as per RDSO SPECIFICATION NO. WD-01-HLS-94

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Chemical Composition)	5000.0
1.2 (Surface Hardness)	2000.0
1.3 (Microstructure)	3000.0
1.4 (Determination of Grain Size)	3000.0
1.5 (Determination of Inclusion Content)	4000.0
1.6 (Determination of De-Carburization)	3000.0

3215

National Test House (NER), Guwahati

IS 287 (1993) - PERMISSIBLE MOISTURE CONTENT FOR TIMBER USED FOR DIFFERBNT PURPOSES - RECOMMENDATIONS

PERMISSIBLE MOISTURE CONTENT FOR TIMBER USED FOR DIFFERBNT PURPOSES - RECOMMENDATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Moisture Content, in Percent)	1200.0

3216

National Test House (WR), Mumbai

IS 287 (1993) - PERMISSIBLE MOISTURE CONTENT FOR TIMBER USED FOR DIFFERBNT PURPOSES - RECOMMENDATIONS

PERMISSIBLE MOISTURE CONTENT FOR TIMBER USED FOR DIFFERBNT PURPOSES - RECOMMENDATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Moisture Content, in Percent)	1200.0

3217

National Test House (WR), Mumbai

IS 1269 : Part 2 (1997) - Legal metrology - Material measures of length: Part 2 steel tape measures

Legal metrology - Material measures of length: Part 2 steel tape measures

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3218

National Test House (WR), Mumbai

IS 5522 (2014) - Stainless steel sheets and strips for utensils - Specification (Third Revision)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0
7.1 (Chemical composition)	500.0

3219

National Test House (ER), Kolkata

DGMS Circular(Approval) No 04 of 2013 (2013) - Revised standards for testing and use of Resin capsules as grouting ,material for Roof bolting purposes in the below ground workings of coal mines

Revised standards for testing and use of Resin capsules as grouting ,material for Roof bolting purposes in the below ground workings of coal mines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.0.B. (Test for Compressive strength-after 30 minutes (Average compressive strength))	7500.0
2.0.B. (Test for Compressive strength-24 hrs (Average compressive strength))	7500.0
2.0.B. (Test for Bond strength Test-30 minutes (Average bond strength in Tonnes))	7500.0
2.0.A. (Test for Gel time & Setting time- For Fast set type (Average Gel time & Setting Time in seconds))	2500.0
2.0.A. (Test for Gel time & Setting time- for Slow set type (Average Gel time & Setting Time in seconds))	2500.0
2.0.A. (Test for Reaction Temperature ( deg C) (for slow setting))	1250.0
2.0.A. (Test for Thermal stability-Gel time & setting time in seconds-Fast set Type (after conditioning @ 5 deg C for 1 hr followed by 45 deg C for 1 hr))	1250.0
2.0.A. (Test for Thermal stability-Gel time & setting time in seconds-Slow set Type (after conditioning @ 5 deg C for 1 hr followed by 45 deg C for 1 hr))	1250.0
2.0.B (Test for Shear strength:(in MPa))	5000.0
2.0.B. (Test for shrinkage (only for slow type))	-
2.0.B. (Test for Flammability)	5000.0
2.0.A (Test for Reaction Temperature ( deg C) (for Fast setting))	1250.0

3220

National Test House (NWR), Jaipur

Custom for IS:5405 - Sanitary Napkin with wings

Sanitary Napkin with wings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (As per Customer Requirements)	2000.0
2 (As per customer requirements)	500.0
3. (As per customer requirements)	500.0
4 (Customer Specified)	500.0
5 (Customer Specified)	500.0
6 (Customer Specified)	1000.0
7 (Customer Specified)	1000.0
8 (Customer Specified)	500.0
9 (Customer Specified)	500.0
10 (Customer Specified)	1000.0
11 (Customer Specified/On the lines of IS:1390)	1000.0

3221

National Test House (WR), Mumbai

IS/IEC 60529 (2001) - Degrees of protection provided by enclosures (IP Code)

Degrees of protection provided by enclosures (IP Code)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Marking)	300.0
13.6.1 (Test conditions for first characteristic numeral 6)	300.0
14.2.8 (Test for second characteristic numeral 8: continuous immersion subject to agreement .)	300.0

3222

National Test House (WR), Mumbai

Customer Requirement - Electronics/IT/RF Product

Electronics/IT/RF Product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (As per Customer requirement)	20000.0

3223

National Test House (WR), Mumbai

CUSTOMER SPEC : Fire Test/Fire Retardant/Fire resistance Test - Fire Test/Fire Retardant/Fire resistance Test

Fire Test/Fire Retardant/Fire resistance Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3224

National Test House (NWR), Jaipur

IS 1757 Part 1 (2020) - Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )

Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Impact Test without sample preparation)	4000.0
9 (Impact Test with sample preparation)	5000.0

3225

National Test House (WR), Mumbai

IS 1161 (2014) - Steel Tube for Structural Purposes

Steel Tube for Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Outside Diameter)	500.0
6.1 (Thickness)	500.0
6.1 (Weight)	1000.0
7 (Workmanship)	1000.0
9 (Straightness)	1000.0
11.2 (Tensile Strength, MPa)	1000.0
11.2 (Yield strength, MPa)	1000.0
11.2 (Percent Elongation, %)	1000.0
11.3 (Cold Bend test)	-
11.3 (Bend Test / Flattening test)	1000.0
8 (Mass of Zinc Coating)	2000.0
0 (Salt Spray Test)	60000.0
0 (Coating Thickness, micron)	2000.0
0 (Uniformity of Coating)	1000.0

3226

National Test House (NWR), Jaipur

IS 1500 : Part 1 (2019) - Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0
2 (Mechanical Test)	3000.0

3227

National Test House (NR), Ghaziabad

CUSTOMER SPEC : Fire Test/Fire Retardant/Fire resistance Test - Fire Test/Fire Retardant/Fire resistance Test

Fire Test/Fire Retardant/Fire resistance Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Fire Test: a) Char Height ,mm b) Flame Spread length, mm c) Time after glow, seconds d) Time after flaming, seconds)	5000.0
- (Fire Retardant Properties)	3000.0
- (Fire Resistance Test)	3000.0

3228

National Test House (NWR), Jaipur

Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060

Method of Test for Paper on the lines of IS 1060

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0
1 ()	-

3229

National Test House (NER), Guwahati

IS 13054 (1991) - Quartzite/quartz for the production of ferroalloys - Specification

Quartzite/quartz for the production of ferroalloys - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Silica (as SiO2), percent)	1200.0
4.1 (Alumina (as Al2O3), Percent)	1200.0
4.1 (Iron oxide (as Fe2O3). percent)	1200.0
- (Loss on ignition, percent)	1200.0

3230

National Test House (ER), Kolkata

IS 17050 (2023) - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK Code)

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK Code)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Test to verify the protection against mechanical impact)	10000.0

3231

National Test House (ER), Kolkata

Custom Paper Core(ER)-2022 (2022) - Paper Core

Paper Core

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions)	2000.0
2.0 (Thickness)	2000.0
3.0 (Compression Strength)	2000.0

3232

National Test House (ER), Kolkata

PCEE/NR/121-Elect/PS/2019(Rev-4) dated 04.11.2019 (2019) - LED Based Luminaries ( Input Voltage Single Phase 230 Volt AC, 50 Hz) for General Service Application.

LED Based Luminaries ( Input Voltage Single Phase 230 Volt AC, 50 Hz) for General Service Application.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.13 (Insulation Resistance between earth and Current Carrying Parts shorted together at 500V megger & after HV Test)	2000.0
4.13 (Shall be tested at 1500 Volt AC for One Minutes between supply terminals & body of the unit.)	3000.0
3.3.8( rev. 3) (Internal Voltage Surge Protection)	1500.0
3.1.7 (Photometric Test ,as per Specification No. CEE/NR/121-Elect/PS/2018( Rev -3) dated 28.06.2018 & LM79)	18000.0

3233

National Test House (ER), Kolkata

C/QA&I/SFQP/SCW, Rev.4 dated 29.01.2016 (2016) - Measurement of Resistivity of Gravel20/40mm

Measurement of Resistivity of Gravel20/40mm

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Measurement of Resistivity of Gravel)	20000.0

3234

National Test House (ER), Kolkata

IS 101 (2015) - Determination of Volatile Organic Compound (VOC) Content gram per litre— Difference Method

Determination of Volatile Organic Compound (VOC) Content gram per litre— Difference Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Volatile Organic Compound (VOC) Content gram per liter (on the lines of IS 101part2/Sec-1):1988 & IS 101 Part 2/Sec2):1986)	4000.0

3235

National Test House (WR), Mumbai

IS 6911 (2017) - Stainless steel plate, sheet and strip - Specification (Second Revision)

Stainless steel plate, sheet and strip - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Erichsen Cupping Test)	2000.0
15 (Surface Finish - Visual)	1000.0
17 (Dimension Thickness)	1000.0
10 (Hardness )	2000.0
10 (Tensile strength)	1000.0
10 (Yield Stress)	1000.0
10 (Elongation)	1000.0
6 (Visual examination)	1000.0
7 (Chemical Analysis (PLEASE SEE THE ANNEXURE))	5000.0
Cl 7.1 & 7.2 of Table 1 (Carbon (as C), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Silicon (as Si), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Manganese (Mn), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Nickel (as Ni), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Chromium (as Cr), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Molybdenum (Mo), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Sulphur (as S), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Phosphorus (as P), Percent)	1000.0
7.1 & 7.2 (Copper)	1200.0
7.1 & 7.2 (Aluminium)	1200.0
7.1 & 7.2 (Niobium)	1200.0
7.1 & 7.2 (Titanium)	1200.0
Cl 7.1 & 7.2 of Table 1 (Nitrogen (as N), Percent)	1000.0
Cl 7.1 & 7.2 of Table 1 (Other element)	1200.0
12 (Corrosion Resistance as per IS 10461 Part 1 & 2)	10000.0
17 (Dimension width)	500.0

3236

National Test House (NER), Guwahati

IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification

Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Colour, true colour units)	1200.0
5.3 (Taste)	1000.0
5.3 (Antimony (as Sb))	1000.0
5.3 (Barium (as Ba))	1000.0
5.3 (Borates (as B))	1000.0
5.3 (Calcium (as Ca))	1000.0
5.3 (Chloride (as Cl))	1000.0
5.3 (Fluoride (as F))	1000.0
5.3 (Residual free chlorine)	1000.0
5.3 (Iron (as Fe))	1200.0
5.3 (Nitrate (as NO3))	1000.0
5.3 (Nitrite (as NO2))	1000.0
5.3 (Odour)	1000.0
5.3 (pH)	1000.0
5.3 (Phenolic compounds (as C6H5OH))	1000.0
5.3 (Silver (as Ag))	1000.0
5.3 (Sulphate (as SO4))	1200.0
5.3 (Sulphide (as H2S))	1000.0
5.3 (Alkalinity (as HCO3))	1000.0
5.3 (Total dissolved solids)	1000.0
5.3 (Turbidity)	1000.0
5.2.9 (Vibrio parahaemolyticus)	1200.0
5.2.9 (Vibrio cholerae)	1200.0
5.2.8 (Shigella)	1200.0
5.2.8 (Salmonella)	1200.0
5.2.7 (Yeast & Mould)	1200.0
5.2.6 (Aerobic microbial count/ ml at 37° ± 1° C in 24 hours)	1200.0
5.2.6 (Aerobic microbial count/ ml at 20-22 °C in 72 hours)	1200.0
5.2.5 (Pseudomonas aeruginosa)	1200.0
5.2.4 (Sulphite reducing Anaerobes)	1200.0
5.2.3 (Staphylococcus aureus)	1200.0
5.2.3 (Faecal Streptococci)	1200.0
5.2.2 (Coliform)	1200.0
5.2.1 (Escherichia coli)	1200.0
5.3 (Manganese (as Mn))	1200.0
5.3 (Sodium (as Na))	1000.0
5.3 (Magnesium (as Mg))	1000.0
5.3 (Mercury (as Hg))	2000.0
5.3 (Nickel (as Ni))	1000.0
5.3 (Chromium (as Cr))	1000.0
5.3 (Aluminium (as Al))	1000.0
5.3 (Arsenic (as As))	2000.0
5.3 (Bromate (as BrO3))	1200.0
5.3 (Cadmium (as Cd))	1000.0
5.3 (Copper (as Cu))	1200.0
5.3 (Lead (as Pb))	1000.0
5.3 (Selenium (as Se))	1000.0
5.3 (Zinc (as Zn))	1000.0
5.4.1 (Annex D) (Isoproturon)	5000.0
5.4.1 (Annex D) (2,4-D)	5000.0
5.4.1 (Annex D) (Butachlor)	5000.0
5.4.1 (Annex D) (Alachlor)	5000.0
5.4.1 (Annex D) (Monocrotophos)	5000.0
5.4.1 (Annex D) (Malaxon)	5000.0
5.4.1 (Annex D) (Malathion)	5000.0
5.4.1 (Annex D) (Paraxon methyl)	5000.0
5.4.1 (Annex D) (Methyl parathion)	5000.0
5.4.1 (Annex D) (Phorate sulfoxide)	5000.0
5.4.1 (Annex D) (Phorate sulfone)	5000.0
5.4.1 (Annex D) (Phorate)	5000.0
5.4.1 (Annex D) (Dieldrin)	5000.0
5.4.1 (Annex D) (Aldrin)	5000.0
5.4.1 (Annex D) (Atrazine)	5000.0
5.4.1 (Annex D) (Ethion)	5000.0
5.4.1 (Annex D) (Chloropyrifos)	5000.0
5.4.1 (Annex D) (Endosulfan sulphate)	5000.0
5.4.1 (Annex D) (Beta-Endosulfan)	5000.0
5.4.1 (Annex D) (Alpha-Endosulfan)	5000.0
5.4.1 (Annex D) (Delta-HCH)	5000.0
5.4.1 (Annex D) (Gamma-HCH)	5000.0
5.4.1 (Annex D) (Βeta-HCH)	5000.0
5.4.1 (Annex D) (Αlpha-HCH)	5000.0
5.4.1 (Annex D) (p, p-DDT)	5000.0
5.4.1 (Annex D) (o, p-DDT)	5000.0
5.4.1 (Annex D) (p, p-DDE)	5000.0
5.4.1 (Annex D) (o, p-DDE)	5000.0
5.4.1 (Annex D) (p, p-DDD)	5000.0
5.4.1 (Annex D) (o, p-DDD)	5000.0
5.3 (Polynuclear aromatic hydrocarbons (PAH))	2000.0
5.3 (Polychlorinated biphenyls (PCB))	2000.0
5.4 (Total pesticide residue)	5000.0
5.3 (Cyanide (as CN))	2000.0
5.3 (Borates (as B))	1000.0
5.3 (Anionic Surface active agents (as MBAS))	1200.0
5.3 (Mineral oil)	1000.0
Cl No. 5 (Test parameters as per attached Annexure B)	5000.0
Cl No. 5 Table 1, 2 & 3 (Test parameters as per attached Annexure A)	15000.0

3237

National Test House (ER), Kolkata

RDSO MP-0.41.00.01 : Part Rev 1 (2003) - Schedule of Technical Requirements for Transition Screw Couplings for Centre Buffer Coupler

Schedule of Technical Requirements for Transition Screw Couplings for Centre Buffer Coupler

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3.3 (Destruction Test)	7500.0
7.3.2 (Impact Test)	7500.0

3238

National Test House (ER), Kolkata

IS 104 (2017) - Ready Mixed Paint, Brushing, Zinc Chrome, Priming

Ready Mixed Paint, Brushing, Zinc Chrome, Priming

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
i) Table 1 Cl 4.3&7.1 (Consistency)	100.0
ii) Table 1 Cl 4.3&7.1 (Finish)	100.0
iii) Table 1 Cl 4.3&7.1 (Drying time-Hard dry in hours)	100.0
iv) Table 1 Cl 4.3&7.1 (Mass, kg/10 liter)	100.0
v) Table 1 Cl 4.3&7.1 (colour)	100.0
vi) Table 1 Cl 4.3&7.1 (Wet opacity, m2/10 liter)	100.0
vii.a) Table 1 Cl 4.3&7.1 (Flexibility and adhesion a. Scratch hardness (Load 1 000 g))	100.0
vii.b) Table 1 Cl 4.3&7.1 (Flexibility and adhesion b) Bend test, with 6.25 mm dia mandrel and type 1 apparatus)	100.0
viii) Table 1 Cl 4.3&7.1 (Flash point)	200.0
ix.a) Table 1 Cl 4.3&7.1 (Resistance to humidity Under conditions of condensation a)Resistance to humidity)	2000.0
ix.b) Table 1 Cl 4.3&7.1 (Resistance to humidity Under conditions of condensation b)Resistance to salt spray)	2000.0
x) Table 1 Cl 4.3&7.1 (Keeping properties)	5000.0
Cl 4.1 (Pigment content, percent by mass (IS:101 part 8/sec 2:1990))	1000.0
Cl 4.1.1 ANNEX B (Chromic anhydride(CrO3) content, percent by mass)	2000.0
Cl 4.1.1 ANNEX B (Zinc oxide(ZnO) content, percent by mass)	2000.0
Cl 4 (Zinc chrome content, percent by mass ( including Chromic anhydride & Zinc Oxide))	100.0
Cl 4 (Lead Restriction)	2000.0

3239

National Test House (ER), Kolkata

IS 2046 (1995) - Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Colour and pattern)	500.0
5.2.1 (Surface Finish)	500.0
5.3 (Thickness)	1000.0
5.4.1 (Surface Defects)	1000.0
5.4.2 (Edge Defects)	1000.0
5.4.3 (Broken Corners)	1000.0
5.4.4 (Sanding Defects)	1000.0
5.4.5 (Warping (Flatness))	1000.0
5.4.6 (Length and Width)	1000.0
5.4.7 (Straightness of Edges)	1000.0
5.4.8 (Squareness of laminates)	1000.0
5.5 (Resistance to immersion in Boiling water(mass increase))	1000.0
5.5 (Resistance to immersion in Boiling water(thickness increase))	1000.0
5.5 (Resistance to suface wear)	3000.0
5.5 (Resistance to Scratching)	2000.0
5.5 (Resistance to immersion in boiling water (Appearance))	500.0
5.5.3 (Resistance to Dry Heat at 180 degC.)	2000.0
5.5 (Dimensional Stability at Elevated Temperature (L))	1500.0
5.5 (Dimensional Stability at Elevated Temperature(T))	1500.0
5.5 (Dimensional Stability at 20 degC(L))	1000.0
5.5 (Dimentional Stability at 20 degC(T))	1000.0
5.5 (Resistance to Cracking)	2000.0
5.5 (Resistance to Staining)	5000.0
5.5 (Resistance to colour change in Xenon arc light)	3000.0
5.5 (Resistance to Cigarate Burns)	2000.0
5.5 (Resistance to Steam)	2000.0

3240

National Test House (NWR), Jaipur

ASTM E 1086 (2014) - Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Chromium (Cr)- ASTM E 1086)	1000.0
- (Nickel (Ni) ASTM E 1086)	1000.0