NTH - Management Information System

Search by Standard No.

Reset

3987 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3031

National Test House (NER), Guwahati

IS 6745 (1972) - Mass of Zinc Coating (IS 6745)

Mass of Zinc Coating (IS 6745)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Mass of Zinc Coating,(IS 6745:1972))	2000.0

3032

National Test House (NR), Ghaziabad

AASHTO T 166 (for BC & DBM cores) - AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for bulk specific gravity (Gmb) of DBM (on the lines of AASHTO T 166))	2500.0
2 (Test for bulk specific gravity (Gmb) of BC (on the lines of AASHTO T 166))	2500.0

3033

National Test House (SR), Chennai

GOST 2850-80 (80) - Millboard

Millboard

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Density , Grade : KAOH-1& KAOH-2)	1000.0
2 (Ultimate Tensile Strength (Longitudinal Direction) , Grade KAOH-1)	1500.0
2 (Ultimate Tensile Strength (Transverse Direction) , Grade KAOH-1)	1500.0
2 (Ultimate Tensile Strength (Transverse Direction) , Grade KAOH-2)	1500.0
2 (Ultimate Tensile Strength (Longitudinal Direction) , Grade KAOH-2)	1500.0
3 (Moisture Content, Grade: KAOH-1)	1000.0
3 (Moisture Content, Grade: KAOH-2)	1000.0
4 (Loss of Weight by Calculation, Grade : KAOH-1 & KAOH-2)	2000.0

3034

National Test House (WR), Mumbai

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Mass per meter run.)	1000.0
8.6 (Impact Energy)	3000.0
8.7 (Resistance to Intergranular corrosion)	10000.0
9.2 (Tensile Strength (Dia of the bar 0-12 mm))	500.0
9.2 (0.2 percent proof stress)	500.0
9.2 (Percentage Elongation after Fracture.)	500.0
9.2 (Percentage total elongation at maximum force)	500.0
9.3 (Bend Test)	1000.0
9.4 (Re Bend Test)	1000.0
9.2 (Tensile Strength (dia of the bar 12-28 mm))	1500.0
9.2 (Tensile Strength (dia of the bar 28-32 mm))	2000.0
4.3.1 (4) (Carbon (as C))	500.0
4.3.1 (5) (Silicon (as Si))	500.0
4.3.1 (6) (Manganese (as Mn))	500.0
4.3.1 (7) (Sulphur (as S))	500.0
4.3.1 (8) (Chromium (as Cr))	500.0
4.3.1 (9) (Nickel (as Ni))	500.0
4.3.1 (10) (Molybdenum (Mo))	500.0
4.3.1 (11) (Phosphorus (as P))	500.0
4.3.1 (12) (Copper (as Cu))	500.0
4.3.1 (13) (Nitrogen (as N))	500.0

3035

National Test House (ER), Kolkata

Custom-35-ER - False Ceiling and Accessories

False Ceiling and Accessories

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension (Thickness))	1000.0
2 (Dimension (Diameter))	1000.0
3 (Dimension (length))	1000.0
4 (Mass of Zinc Coating)	2000.0
6 (Dimension (Size))	1000.0
7 (Dimension (Perforation Dia))	1000.0
8 (Dimension(Height of Tiles))	1000.0
13.2 First Characteristic Numeral 2 (Protection against solid foreign objects of 12.5 mm dia and greater,First Characteristic Numeral 2)	7500.0
14.2.3 second characteristic numeral 3 (14.2.3 second characteristic numeral 3:Protected against spraying water)	7500.0
14.2.4 Second characteristic numeral 4 (14.2.4 Second characteristic numeral 4 :Protected against splashing water)	7500.0
4.2 (Material : Messenger Conductor)	100.0
27358 (Material : Insulation)	100.0
6.3 (Weight of Phosphate Coating)	2000.0
6.11(ix) (Accelerated storage stability)	100.0
9 (Carbon)	500.0
9 (Sulphur)	500.0
9 (Phosphorus)	500.0
9 (Manganese)	1000.0
9 (Nickel)	1000.0
9 (Silicon)	1000.0
13 (Perforation Dia of Tiles)	1000.0
12 (Powder Coating Thickness of Tiles)	2000.0
11 (Size of Tiles)	1000.0
10 (Thickness of Tiles)	500.0

3036

National Test House (ER), Kolkata

RDSO/2013/CG-01 (2023) - Non-Asbestos Based Organic Brake Pads for LHB Type Coaches Equipped with Disc Brake System on Indian Railways

Non-Asbestos Based Organic Brake Pads for LHB Type Coaches Equipped with Disc Brake System on Indian Railways

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.0 (Bending Strength)	3000.0
9.0 (Density)	1000.0
9.0 (Ash Content)	1000.0
9.0 (Acetone extract)	2000.0
9.0 (Cross braking strength)	2000.0

3037

National Test House (NR), Ghaziabad

IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification

Coarse and fine aggregate for Concrete for concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0

3038

National Test House (NR), Ghaziabad

IS 1199 (4) - Methods of sampling and analysis of concrete

Methods of sampling and analysis of concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Ratio of Cement :Aggregates)	5000.0

3039

National Test House (NR), Ghaziabad

IS 3989 (2009) - Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste and Ventilating Pipes, Fittings and Accessories

Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste and Ventilating Pipes, Fittings and Accessories

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Brinell Hardness (HBW))	2000.0
4 (Hammer Test)	1000.0
5 (Hydrostatic Test)	5000.0
6.3 (Thickness and OD of the pipe)	1000.0
6.3 (Mass of the Pipe)	1000.0
0 (Visual Check)	1000.0
0 (Ovality)	1000.0
0 (Length)	1000.0
0 (Marking)	500.0
0 (Class of Pipe)	500.0
0 (Tensile Strength)	2000.0
0 (Ring Test)	2000.0
0 (Thickness)	1000.0
8 (Coating Test)	2000.0

3040

National Test House (ER), Kolkata

13620 (1993) - FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION

FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-5 (BOND STRENGTH TO CONCRETE(A-5))	15000.0
5 (Surface Preparation (Visual Examination))	1000.0
8.3 (Adhesion of Coating (Bend Test))	1000.0
4 (Tensile Strength (up to 12 mm) as per IS 1786)	-
4 (Yield/0.2% Proof Stress as per IS 1786)	1000.0
4 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area, % as per IS 1786)	1000.0
4 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Cross- Sectional Area, % as per IS 1786)	-
4 (Tensile Strength (16 to 28 mm) as per IS 1786)	1000.0
4 (Tensile Strength (32 to 40 mm) as per IS 1786)	1500.0
4 (Bend Test as per IS 1786)	1000.0
4 (Re-bend Test (0 - 28 mm) as per IS 1786)	1000.0
4 (Re-bend Test (32 - 40 mm) as per IS 1786)	1500.0
4 (Mass per metre run as per IS 1786)	1000.0
4 (TS/ YS Ratio as per IS 1786)	-
4 (Carbon, % by mass as per IS 1786)	500.0
4 (Sulphur, % by mass as per IS 1786)	500.0
4 (Phosphorus, % by mass as per IS 1786)	500.0
4 (Sulphur+ Phosphorus, % by mass as per IS 1786)	500.0
4 (Carbon Equivalent (CE), % by mass as per IS 1786)	2000.0
7.2 (Continuity of Coating (Visual only))	1000.0
7.1 (Coating Thickness)	2000.0

3041

National Test House (ER), Kolkata

13620 (upto 12mm) (1993) - FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION (Upto 12mm)

FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION (Upto 12mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-5 (BOND STRENGTH TO CONCRETE (IS 13620:1993))	10000.0

3042

National Test House (ER), Kolkata

SLS 1126.1-2020 - Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1 (1st 20 h capacity Test)	25000.0
9.2 (1st Reserve Capacity Test)	20000.0
9.4 (Charge Acceptance Test)	15000.0
9.5 (charge retention test)	20000.0
9.6.1.1 (Corrosion Test)	15000.0
9.6.2 (Endurance in cycle test)	45000.0
9.7 (Water consumption Test)	15000.0
9.8 (Vibration Resistance Test)	15000.0
9.9 (Electrolyte Retention Test)	10000.0
8.4.2,9.10 (Cranking performance for dry charge batteries)	15000.0
9.6.1.2 (Endurance in cycle test)	55000.0
9.1 (2nd 20 h capacity Test)	25000.0
9.1 (3rd 20 h capacity Test)	25000.0
9.2 (2nd Reserve Capacity Test)	20000.0
9.2 (3rd Reserve Capacity Test)	20000.0
9.3.1 (2nd cranking performance test)	20000.0
9.3.1 (3rd cranking performance test)	20000.0

3043

National Test House (ER), Kolkata

8623-1:(1993) - Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.2 (Verification of dielectric properties)	10000.0
8.3.4 (Verification of insulation resistance)	10000.0
8.2.1.3 (Tempreture rise test)	20000.0

3044

National Test House (ER), Kolkata

JIS D 5301:2006 - Lead Acid starter Batteries

Lead Acid starter Batteries

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.5.2 (5 h rate capacity)	20000.0
Annexure 1 Clause 2 (Water consumption test)	10000.0
10.1 (20 h rate capacity (C20) test)	25000.0
10.2 (Reserve capacity test)	20000.0
10.3 (Cold cranking ampere test)	15000.0
10.4 (Charge acceptance test)	10000.0
10.5(a) (Light load endurance test)	25000.0
10.5(b) (Heavy load endurance test)	25000.0
10.6 (Vibration resistance)	10000.0
10.7 (Terminal strength test)	5000.0
10.8 (Fastening robustness test)	5000.0
10.9 (Electrolyte retention test)	20000.0
10.10 (Charge retention test)	15000.0
Annex A, Table A.2 (Dimension)	5000.0

3045

National Test House (Satellite Centre), Varanasi

IS 14887 (2014) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Mass of Sack)	1000.0
4.1.1 (Ash Content)	2000.0
4.1.1 (Picks/dm)	1000.0
4.1.1 (Ends/dm)	1000.0
4.1.1 (Dimensions, Inside Width)	1000.0
4.1.1 (Dimensions, Inside Length)	1000.0

3046

National Test House (NR), Ghaziabad

1239 (2011) - Steel Tubes, Tubulars and other Steel Fittings, PART 2 STEEL PIPE FITTINGS

Steel Tubes, Tubulars and other Steel Fittings, PART 2 STEEL PIPE FITTINGS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Dimension,mm.)	1000.0
13.1.1 (Mass of Zinc Coating)	2000.0
13.1.2 (Uniformity of Zinc Coating)	500.0
14 (Workmanship, Visual)	500.0
3.1 (Sulphur (% by mass))	700.0
3.1 (Phosphorous (% by mass))	700.0

3047

National Test House (ER), Kolkata

GE: IRS -2 (Final) (2005) - SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS INCLUDING GUIDELINES FOR LAYING

SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS INCLUDING GUIDELINES FOR LAYING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.C.1 (Test for Non Plastic fines(Particles of size less than 75 micron)(as per GE: IRS -2 (Final)))	1000.0
4.1.C.2 (Test for Plastic fines(GE: IRS -2 (Final)))	1000.0
4.1.d (Test for Particle size distribution(GE: IRS -2 (Final)))	5000.0
4.1.e.1 (Test for Uniformity Co-efficient (Cu) {GE: IRS -2 (Final)})	1500.0
4.1.e.2 (Test for Co-efficient of Curvature(CC) (GE: IRS -2 (Final)))	1500.0
Nil (Liquid Limit (IS 2720(5)-1985))	1000.0
- (Plastic limit (IS 2720(5):1985))	1000.0
- (Free soil Index(IS 2720(40)1977))	1000.0
- (Shrinkage limit (IS 2720(6)1985))	1000.0
- (DETERMINATION OF WATER CONTENT-DRY DENSITY RELATION (IS 2720(8):1983) (Proctor test))	5000.0
- (Test for Aggregate Abrasion Value (Los Angeles) as per IS 2386 (Part 4): 1963)	1500.0

3048

National Test House (ER), Kolkata

customer specification ER CHEMICAL METAL LAB (2022) - customer specification ER CHEMICAL METAL LAB

customer specification ER CHEMICAL METAL LAB

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Zinc (as Zn),% by mass)	2000.0
2 (Aluminum as Al % by mass)	2000.0

3049

National Test House (NER), Guwahati

NTH/NER/Custom/2022/03 - Chemical General

Chemical General

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Silica (as SiO2), % by mass)	1000.0
2 (Alumina (as Al2O3), % by mass)	1000.0
3 (Iron Oxide (as Fe2O3), % by mass)	1000.0
4 (Calcium Oxide (as CaO), % by mass)	1000.0
5 (Magnesium Oxide (MgO), % by mass)	1000.0
6 (Mixed Oxide (as R2O3), % by mass)	2000.0
7 (Iron (as Fe), % by mass)	1000.0
8 (Loss on ignition, % by mass)	1000.0
9. (Sulphuric anhydride (as SO3), % by mass - IS 4032:1985)	1000.0
10. (Chloride (as Cl), % by mass - IS 4032:1985)	1000.0
11. (Alkali content (as Na2O), % by mass - IS 4032:1985)	2000.0
12 (Available lime (as CaO), percent by mass)	1000.0
13 (Acid insoluble matter ( as SiO2 ), percent by mass)	1000.0
14 (Particle size (Pass through 2 mm IS sieve))	1000.0
16 (Sulphur, percent)	1000.0
15 (Moisture, percent)	1000.0
16 (Gross calorific value, KCal/Kg)	2000.0
18 (Silica (as SiO2))	1000.0
19 (Ash content)	2000.0
20 (Moisture content)	1200.0
21 (Zinc (as Zn))	2000.0
22 (Chromium (as Cr))	1200.0
23 (Selenium (as Se))	1200.0
24 (Cobalt (as Co))	1200.0
25 (Lead (as Pb))	1200.0
26 (Cadmium (as Cd))	1200.0
27 (Manganese (as Mn))	1200.0
28 (Nickel (as Ni))	1200.0
29 (Iron (as Fe))	1200.0
30 (Alkali content (as Na2O), % by mass)	750.0
31 (Alkali content (as K2O), % by mass)	750.0
32 (Silt content, % by mass)	1000.0

3050

National Test House (ER), Kolkata

RDSO/PE/SPEC/AC/0059-2004(Rev.O),Amendment No-01 (2004) - V-Belts used For Driving Alternators For TL and AC Coaches

V-Belts used For Driving Alternators For TL and AC Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 (Pitch length)	5000.0
7.0 (Coding)	1000.0
3.1 (Construction)	2000.0
3.2(i) (Hardness(IRHD))	1000.0
3.2(ii) (Tensile Strength of base material)	2000.0
3.2(iii) (Elongation at break of base material)	1000.0
3.3(i) (Elongation of Finished Belt)	1000.0
3.3(ii) (Reference Elongation at 300 kgf of Finished Belt)	1000.0
3.3(iii) (Breaking Strength)	2000.0
5.1(i) (Nominal Top width)	1000.0
5.1(ii) (Nominal Thickness)	1000.0
5.1(iii) (Angle)	1000.0
12.7(i) (Change in Hardness after ageing)	1000.0
12.7(ii) (Change in Tensile Strength after ageing)	2000.0
12.7(iii) (Change in elongation after ageing)	1000.0
12.7(iv) (Compression set)	1000.0

3051

National Test House (NR), Ghaziabad

IRS : TC 30-05 - UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS

UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.1 (Diameter mm (Nominal) - 0.90 Tolerance mm - +-0.02 Maximum Resistance Ohm/ Km at 20 deg C Each core - 28 Loop - 56)	1000.0
3.1.2 (The conductor shall be uniformly drawn, circular in Closs-section, uniform III qiI<lhty, free from splits, cracks, corrosion and other surface imperfectIons)	100.0
3.1.3 (No joints shall be made in the conductor except in exceptional cases where It IS necessary to join conductors during manufacture, it shall fulfill. the requirements of clause 3.1.)	1.0
5.5.1 (The diameter of the conductor shall be measured on the finished sample. The measurement shall be made atleast at three different points with two readings at 90 degree along the length of the sample.)	1.0
5.5.2 (A sample of wire taken from finished cable, when tested shall have elongation at fracture of not less than 23 d for diameter O.9 mm)	1.0
5.7.1 (Determination of the thickness of insulation of round cores and sheath shall be made on a representative sample of the cable approximately one meter long taken from the drum length of the cable.)	1.0
5.7.2 (The measurement in case of conductor insulation, inner, intermediate and outer sheath shall be made at three different points at interval of not less than 75 mm along the length of the sample and at each point the minimum thickness or the'insulation inner, intermediate & outer sheath shall be measured along with two more readings made at equidistant points around the periphery.)	1.0
3.8.3 (The number and the size of the aluminium wires/strips used for screening shall be such as to comply with the requirements of Cl 5.9.9)	200.0
3.8.4 (The layer of the aluminium wires/ strips used for screening shall be compact and the length of the lay shall be high.)	200.0
3.8.5 (The minimum tensile strength of Aluminium screen shall be 15 Kg/ Sqmm)	200.0
3.8.6 (The innermost layer of the screening shall have left hand lay and the sucessive layer shall be laid with opposite lay.)	200.0
3.8.7 (Drift expansion test to IS 2335-1985 shall be carried out on a test piece of length twice the external dia of the tube by conical mandrel having height three times its base diameter.)	200.0
3.8.8 (Flattening test to IS. 2328- 1983 shall be carried out on a test piece of not less than 50 mm long cut from each selected tube.)	200.0
3.9.1 (The aluminium screen shall be wrapped with a single layer of woven tape impregnated with Barium Chromate with minimum 20% overlap.)	500.0
3.9.2 (The tape used shall be fine woven cloth tape of about 0.15 mm thickness.)	200.0
3.10.7 (The test shall be conducted on PVC intermediate sheath in accprdance with BS 6169 or any approved method.)	1000.0
5.8.1.1 (The test shall be conducted in accordance with the procedure laid down in IS 10810 (Part-7))	500.0
5.8.1.2 (The values after ageing for tensile strength and % elongation shall not be less than given in Cl 5.8.1)	500.0
5.8.1.3 (The values of all the four samples in case of each sheath shall be averaged and then % variation calculated.)	1.0
5.8.2.4 (A sample shall be cut from the cable sheath, 50 mm long measured along the axis. 12 mm wide and the same thickness as the cable sheath)	1000.0
5.8.11 (The test to be conducted in accordance with the procedure laid down in IS 10810 (Part 60))	500.0
3.3 (i) Four conductors insulated as above shall be stranded to form a star, quad. each; conductors diagnolly opposite forming one pair and the remaining two diagonally OPPOS); conductors furming the second pairs of the quad. ii) The lays of the conductors forming the quads shall differ for adjacent quads. The lay of the conductor shall be so chosen as to ensure that the cross talk between the pairs in the cable minimum.)	1000.0
3.4 (Each quad shall retain its size)	1.0
3.12 (Visual Inspection and Marking)	100.0
5.8.22 (Visual Inspection and Marking)	100.0
5.9.1 (HV Test to be carried out)	2000.0
5.9.2 (Insulation resistance Test)	1000.0
5.9.3 (Conductor Resistance Test)	1.0
5.6.3.1 (Mass of Zinc Coating test)	3000.0
5.8.2.3 (Shrinkage Test of PE Insulation)	1000.0
5.8.2.2 (Shrinkage Test of PVC Sheaths)	1000.0

3052

National Test House (SR), Chennai

IEC 62561-2 (2018) - Lightning Protection System components (LPSC) - Part 2: Requirements for conductors and earth electrodes

Lightning Protection System components (LPSC) - Part 2: Requirements for conductors and earth electrodes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.6 (Tensile strength)	4000.0

3053

National Test House (SR), Chennai

IEC 62561-1 (2017) - Lightning Protection System components (LPSC) - Part 1: Requirements for connection components

Lightning Protection System components (LPSC) - Part 1: Requirements for connection components

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.5 (Static mechanical test)	5000.0

3054

National Test House (ER), Kolkata

IS 542 (2018) - Coconut oil - Specification (Third Revision)

Coconut oil - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.1 (Clarity)	500.0
5.7 (i) (moisture and insoluble impurities)	500.0
5.7(ii) (colour in lovibond scale)	500.0
5.7(iii) (Refractive index 40 dg)	500.0
5.7(iv) (Specific gravity 30 dg)	500.0
5.7 (v) (saponification value)	500.0
5.7(vi) (Iodine value)	500.0
5.7 (vii) (Acid value)	500.0
5.7(viii) (Unsaponifiable matter)	500.0
5.7 (ix) (Polenske value)	500.0
5.3 (Test for presence of Karanja oil)	500.0
5.3 (Test for presence of Kusum oil and other oils containing cyanogenic compounds)	500.0
5.3 (Test for presence of Castor oil)	500.0
5.3 (Test for presence of Hydrocyanic acid)	500.0
5.3 (Test for presence of Argemone oil)	500.0
5.3 (Test for presence of mineral oil)	500.0
5.3 (Test for presence of neem oil)	500.0

3055

National Test House (NR), Ghaziabad

IS 191 (2007) - Copper - Specification (Fourth Revision)

Copper - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Selenium+Tellurium)	2000.0
7.1 (Zinc )	1000.0
7.1 (Tin )	1000.0
7.1 (Tellurium)	1000.0
7.1 (Selenium)	1000.0
7.1 (Oxygen)	5000.0
7.1 (Lead )	1000.0
7.1 (Bismuth)	1000.0
7.1 (Antimony)	1000.0
7.1 (Arsenic )	2000.0
7.1 (Nickel )	1000.0
7.1 (Sulphur)	1000.0
7.1 (Iron )	1000.0
7.1 (Phosphorus )	1000.0
7.1 (Silver )	1000.0
7.1 (Copper + Silver )	2000.0

3056

National Test House (NR), Ghaziabad

IS 110 (2017) - Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)

Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3xiii (Keeping properties)	5000.0

3057

National Test House (NR), Ghaziabad

IS 158 (2015) - Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3,xvi (Keeping properties)	500.0
4.3,xv (Flash Point)	500.0
4.3,xiv (Resistance to heat)	200.0
4.3,xiii (Resistance to alkali)	1000.0
4.3,xii (Resistance to acid)	2000.0
4.3,xi (Volatile matter, percent by mass)	200.0
4.3,x (Protection against corrosion under conditions of condensation)	2000.0
4.3, ix (Stripping Test)	1000.0
4.3, viii (Flexibility and adhesion, bend test with 6.25 mm dia mandrel and type 1 apparatus)	1000.0
4.3,vii (Water Content,percent by mass)	100.0
4.3,vi (Mass, kg/10litre)	100.0
4.3,v (Colour)	100.0
4.3,iv (Wet opacity)	500.0
4.3,iii (Finish)	100.0
4.3,ii (Consistency)	1000.0
4.3,i (Drying time : Hard dry)	1000.0
4.2 (Lead Restrictions)	1500.0

3058

National Test House (NR), Ghaziabad

IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete

Coarse and fine aggregate for Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Test for Alkali aggregate reaction- Chemical method (IS 2386(Part 7):1963))	3000.0
Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0
6 (Test for Silt content- (CPWD Specification))	1000.0
6.3 (Sieve analysis/Particle size distribution)	2000.0
2 (Test for Specific Gravity (IS:2386(part -III)1963))	500.0
4 (Test for Bulk Density-Loose condition ( IS:2386(part -III)1963))	500.0
5 (Test for Bulk Density-Compacted condition ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption (IS:2386(part -III)1963))	1000.0
7 (Deleterious Materials)	2000.0
10 (Test for bulking of sand)	1000.0
8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963))	2000.0
7 (Deleterious Materials)	2000.0

3059

National Test House (NR), Ghaziabad

IS 1171 (2011) - Ferromanganese - Specification (Fifth Revision)

Ferromanganese - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.3 Ferromanganese High Carbon (Manganese Content %)	2000.0
3.1.3 Ferromanganese High Carbon (Carbon %)	1500.0
3.1.3 High carbon ferromanganese (Silicon %)	1500.0
3.1.3 Ferromanganese High Carbon (Sulphur %)	1500.0
3.1.3 Ferromanganese High Carbon (Phosphorus (as P)%)	1500.0

3060

National Test House (NR), Ghaziabad

IS 1079 (2017) - Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Chemical Analysis)	2500.0
8.3 (0.2 Proof Stress / Yield Stress (Drawing quality))	1000.0
8.3 (Tensile Strength for Designation Ordinary, Commercial and General purpose.)	2000.0
8.3 (Elongation)	1000.0
9 (Bend Test)	1000.0
13 (Dimensions)	1000.0
1 (Mass of Zinc Coating)	2000.0