NTH - Management Information System

Search by Standard No.

Reset

4067 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

2521

National Test House (WR), Mumbai

IS 1848 : Part 2 (2018) - Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)

Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Substance (Grammage),)	1000.0

2522

National Test House (NWR), Jaipur

IS 9926 (1981) - SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS

SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Visual examination)	-
7.2 (Dimension: Diameter of the Wire)	1000.0
7.3 (Resistance test: Calculated resistance corrected to 20°C)	3000.0
7.4 (Persulphate Test)	2000.0

2523

National Test House (NWR), Jaipur

IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass)	3000.0
5.1.1 b Chemical composition (Copper (as Cu)content,% by mass)	500.0
5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass)	500.0
5.1.1 d Chemical composition (Silicon (as Si) content,% by mass)	500.0
5.1.1 e Chemical composition (Iron (as Fe) content,% by mass)	500.0
5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass)	500.0
5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass)	500.0
5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass)	500.0
5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass)	500.0
5.1.1 j Chemical composition (Vanadium (as V) content,% by mass)	500.0

2524

National Test House (SR), Chennai

IBR 1950 (2023) - Qualified Boiler Welder's Certificate

Qualified Boiler Welder's Certificate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IBR 1950 (Welder qualification)	4500.0
NTH Additional Charges for Testing (Scientist Charges)	5000.0

2525

National Test House (WR), Mumbai

IS 1528 (2010) - Refractory materials

Refractory materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 4 (Cold Crushing Strength (as per IS 1528 (Part 4): 2012), in N/mm^2)	2500.0
Part 8 / Part 15 (Apparent Porosity [on the lines of IS 1528 (Part 8)/ IS 1528 (Part 15)], %)	1000.0

2526

National Test House (SR), Chennai

IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete

Coarse and fine aggregate for Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963)	2000.0
2 (Test for Specific Gravity (IS:2386(part -III)1963))	500.0
3 (Test for Water absorption (IS:2386(part -III)1963))	1000.0
4 (Test for Bulk Density-Loose condition ( IS:2386(part -III)1963))	500.0
5 (Test for Bulk Density-Compacted condition ( IS:2386(part -III)1963))	500.0
6 (Test for Silt content- (CPWD Specification))	1000.0
7 (Deleterious Materials)	2000.0
5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %)	2000.0
9 (Test for Alkali aggregate reaction- Chemical method (IS 2386(Part 7):1963))	3000.0
10 (Test for bulking of sand)	1000.0
Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0
8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963))	2000.0
5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %)	2000.0
5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %)	2000.0

2527

National Test House (NWR), Jaipur

MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
803.4.1.2 (Drying Time)	1200.0
803.4.1.2 (Titanium Dioxide, as TiO2 % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Colour)	1200.0
803.4.1.2 (Softening point (BS 3262 (Part 1)) ASTM D 36)	1200.0
803.4.1.2 (Cracking Resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Glass Bead content % (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1)))	1200.0
803.4.2.3 (Roundness)	1000.0
803.4.2.3 (Free flowing properties)	500.0
803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088))	700.0
803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088))	750.0
803.4.2.3 (Appearance)	500.0
803.4.1.2 (Skid Resistance)	1000.0

2528

National Test House (ER), Kolkata

IS 2645:2003 (RA 2017) - Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification

Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2.a. (Setting time -Initial)	500.0
3.2.b (Setting time-Final)	500.0
3.3.a (Compressive strength-3 days)	2000.0
3.3.b (Compressive strength-7 days)	2000.0
3.4 (Chloride content)	2000.0
- (Appearance)	1000.0
- (Bulk density)	1000.0
- (pH)	1000.0

2529

National Test House (SR), Chennai

CUS/SR/MECH-16 - Nylon Rope

Nylon Rope

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Breaking load, kN)	3000.0

2530

National Test House (NR), Ghaziabad

IS 11673 : Part 1 (2019) - Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Sodium chlorate ( as NaClO3))	1200.0
5.3 (Iron (as Fe))	1200.0
5.3 (Free sodium carbonate (as Na2CO3))	1200.0
5.3 (Free alkali (as NaOH))	1200.0
5.3 (Total chlorine (as Cl))	1200.0
5.3 (Available chlorine (as Cl))	1200.0
5.3 (Relative density (at 250/250 C))	1200.0

2531

National Test House (ER), Kolkata

IS 2645 (2003) - Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3.b (Compressive Strength-7days)	2000.0
3.3.a (Compressive Strength-3 days)	2000.0
3.2.b (Setting Time (Final Setting Time))	500.0
3.2.a (Setting Time (Initial Setting Time))	500.0
3.4 (Chloride Content, %)	1000.0

2532

National Test House (NR), Ghaziabad

IRS-T-46-2023 (2023) - INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS

INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2533

National Test House (NR), Ghaziabad

IRS-T-46 (1996) - Indian Railway Standard Specification for Spheroidal Graphite Cast Iron Inserts

Indian Railway Standard Specification for Spheroidal Graphite Cast Iron Inserts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2534

National Test House (NR), Ghaziabad

IS 6006 (2014) - Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3 (3- Ply 3mm strand: Elongation)	1000.0
7.2 (3- Ply 3mm strand: 0.2% Proof Load)	1000.0
7.1 (3- Ply 3mm strand: Breaking Load, kN)	3000.0
5.1 (Nominal Mass 3- Ply 3mm strand)	1000.0
5.1 (Nominal Area 3- Ply 3mm strand)	500.0
5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire)	500.0
4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire)	1000.0
3.1.2 (Sulphur, % by mass.)	750.0
3.1.2 (Phosphorus, % by mass)	750.0
3.1.2 (Carbon, % by mass.)	625.0

2535

National Test House (NR), Ghaziabad

IRS T-46 (1996) - Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts

Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Weight)	1000.0
12 (Dimensions)	1000.0
11.7 (Internal Soundness)	1000.0
11.6 (Micro Structure)	2000.0
11.5 (Brinell Hardness)	2000.0
11.4 (Elongation)	3000.0
11.4 (Tensile Strength)	3000.0
11.2 (Chemical Composition)	2500.0

2536

National Test House (ER), Kolkata

JIS D 5302-2004 - Lead Acid Batteries for Motorcycles

Lead Acid Batteries for Motorcycles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3.2 (Capacity (10 hour rate))	25000.0
8.3.3 (High Rate Discharge test)	15000.0
8.3.4 (Vibration resistance)	20000.0
Reference 1 (Deep Cycle Endurance)	60000.0
Reference 2 (Shallow Cycle Endurance)	60000.0
Reference 3 (Characteristics of Electrolyte Decrease)	30000.0
Reference 4 (Charge Retention test)	20000.0
8.3.1 (Dimensions)	1000.0

2537

National Test House (ER), Kolkata

JISC 8702 : 2009 - Small- sized valve regulated lead-acid batteries

Small- sized valve regulated lead-acid batteries

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 of JISC 8702-2:2009 (Dimensions)	500.0
5.1 of JISC 8702-1:2009 (Capacity at 20 hr rate)	20000.0
5.2 of JISC 8702-1:2009 (High rate discharge characteristics)	20000.0
5.3 of JISC 8702-1:2009 (Cycle service Endurance)	200000.0
5.4 of JISC 8702-1:2009 (Storage characteristic Test)	20000.0
5.5 of JISC 8702-1:2009 (Maximum permissible current Characteristic)	15000.0
5.6 of JISC 8702-1:2009 (Charge Acceptance characteristic after deep discharge.)	15000.0
5.7 of JISC 8702-1:2009 (Endurance in Trickle application)	100000.0
5.8 of JISC 8702-1:2009 (Endurance in trickle application at 40 Deg C)	130000.0
5.9.a of JISC 8702-1:2009 (Gas Emission Intensity I)	15000.0
5.10.a of JISC 8702-1:2009 (Gas recombinating characteristic - operation of vent valve)	15000.0
5.11 of JISC 8702-1:2009 (Vibration Resistance Characteristics)	15000.0
7.12 of JISC 8702-1:2009 (Shock Resistance Characteristics)	15000.0
7.1.b (Actual Capacity at the 1 hour discharge rate)	20000.0
5.10.b of JISC 8702-1:2009 (Gas recombinating characteristic - Liquid leakage resistance characteristics)	15000.0
5.9.b of JISC 8702-1:2009 (Gas emission intensity II)	15000.0

2538

National Test House (ER), Kolkata

CQAL/637 :2006 - SPECIFICATION FOR BATTERY SECONDARY, LEAD ACID, LOW MAINTENANCE FOR MT PURPOSES

SPECIFICATION FOR BATTERY SECONDARY, LEAD ACID, LOW MAINTENANCE FOR MT PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Visual Examination)	1000.0
15.2 (Physical Examination)	1000.0
15.3 (Dimensions and Layout)	1000.0
15.4 (Marking)	1000.0
15.5 (Capacity (5-h rate))	5000.0
15.6.1 (High Rate Discharge at -15 degree C)	10000.0
15.6.3 (High Rate Discharge at Normal Temperature)	15000.0
15.7 (Robustness of Handle)	5000.0
15.8 (Charge Acceptance)	15000.0
15.9 (Air Pressure Test)	10000.0
15.10 (Life Cycle test)	100000.0
15.11 (Vibration Resistance)	10000.0
15.12 (Over Charge Endurance)	20000.0
15.13 (Strength of Terminal)	5000.0
15.14 (Robustness to Fastening)	5000.0
15.15 (Test for Dry Charged Battery)	10000.0
15.16 (High Voltage Test)	5000.0
15.17 (Retention of Charge)	15000.0
15.18 (Electrolyte Retention test)	5000.0

2539

National Test House (ER), Kolkata

RDSO SPECIFICATION No. M&C/PCN/123/2018 (2018) - SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK)

SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

2540

National Test House (ER), Kolkata

RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Chapter V (Table 1) (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	1200.0
Chapter V (Table 1) (Fineness of grind)	1200.0
Chapter V (Table 1) (Theoretical Spreading rate)	1200.0
Chapter V (Table 1) (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter V (Table 1) (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter V (Table 1) (Abrasion resistance-1000 cycles)	3000.0
Chapter V (Table 1) (Humidity test.)	11000.0
Chapter V (Table 1) (Durability Tests : Accelerated weathering test)	110000.0
Chapter V (Table 1) (Accelerated Tests Resistance to water)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to solvents)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to oil)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to 20% caustic potash (weight by volume))	1500.0
Chapter V (Table 1) (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume))	1500.0
Chapter V (Table 1) (poly isocyanate, in hardener)	3000.0
Chapter V (Table 1) (Unreacted monomer)	3000.0
Chapter V (Table 1) (Gloss at 60 degree angle of incidence)	1200.0
Chapter V (Table 1) (Mass in Kg/10 litres)	1200.0
Chapter V (Table 1) (Keeping Properties for both the packs)	5000.0
Chapter V (Table 1) (Flash Point (b) Component B)	1200.0
Chapter V (Table 1) (Flash Point (a) Component A)	1200.0
Chapter V (Table 1) (Flexibility & Adhesion (6.25mm mandrel))	1200.0
Chapter V (Table 1) (Scratch hardness (1.5 Kg LOAD))	1200.0
Chapter V (Table 1) (Volume solids)	1200.0
Chapter V (Table 1) (Dry film thickness/Per coat)	1200.0
Chapter V (Table 1) (Colour)	1200.0
Chapter V (Table 1) (Finish)	1200.0
Chapter V (Table 1) (Consistency)	1200.0
Chapter V (Table 1) (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter V (Table 1) (Drying time b) Hard Dry)	1200.0
Chapter V (Table 1) (Drying time a) Surface Dry)	1200.0
Chapter V (Table 1) (Identification of polyisocyanates)	3000.0
Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation)	9000.0
Chapter II/Cl. 4.1 (Resistance to salt spray)	21000.0

2541

National Test House (SR), Chennai

Industrial Training - Industrial Training - Electrical Laboratory

Industrial Training - Electrical Laboratory

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Industrial Training - Electrical Laboratory)	1.0

2542

National Test House (ER), Kolkata

NTHER- Calibration of High Current Source (V/I Method) More than 100A - Calibration of High Current Source (V/I Method) More than 100A

Calibration of High Current Source (V/I Method) More than 100A

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Calibration of High Current Source (V/I Method) up to 500A (ac or dc))	4500.0
A.2 (Calibration of High Current Source (V/I Method) up to 800A (ac or dc))	5000.0
A.3 (Calibration of High Current Source (V/I Method) up to 1000A (ac or dc))	6000.0

2543

National Test House (ER), Kolkata

ETI/OHE/50(6/97) re-designated to TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021) - Technical specification for Cadmium copper conductors for over head Electric Traction

Technical specification for Cadmium copper conductors for over head Electric Traction

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1 (Visual examination)	1000.0
8.2.2 (Chemical composition)	2000.0
8.2.3 (Measurement of diameter of individual wire and stranded conductor)	2000.0
8.2.4 (Measurement of weight of wire and conductor)	2000.0
8.2.5 (Measurement of lay length and lay ratio of each layer of stranded conductor)	5000.0
8.2.6 (Measurement of Electrical resistance of wire and stranded conductor)	15000.0
8.2.7 (Tensile test on wires)	32000.0
8.2.8 (Wrapping test on wires)	5000.0

2544

National Test House (NR), Ghaziabad

NTH/NR/RPPT/Sanitary Napkin (2022) - Sanitary Napkin (Firm's Requirement)

Sanitary Napkin (Firm's Requirement)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Pad Length)	500.0
1.2 (Pad Thickness)	500.0
1.3 (Pad Width)	500.0
1.4 (Pad Weight)	500.0
1.5 (Top Sheet/Outer covering layer of pad)	1000.0
1.6 (Absorbent Filler Material)	1000.0
1.7 (Side Wings/Tab)	500.0
1.8 (Back Strip/Barrier/Bottom Sheet)	2000.0
1.9 (Absorbency)	1000.0
1.10 (Disposability)	500.0

2545

National Test House (NER), Guwahati

IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass)	3000.0
5.1.1 b Chemical composition (Copper (as Cu)content,% by mass)	500.0
5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass)	500.0
5.1.1 d Chemical composition (Silicon (as Si) content,% by mass)	500.0
5.1.1 e Chemical composition (Iron (as Fe) content,% by mass)	500.0
5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass)	500.0
5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass)	500.0
5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass)	500.0
5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass)	500.0
5.1.1 j Chemical composition (Vanadium (as V) content,% by mass)	500.0

2546

National Test House (ER), Kolkata

NTHER-Calibration of Micro-ohm Meter - NTHER-Calibration of Micro-ohm Meter

NTHER-Calibration of Micro-ohm Meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Calibration of Micro-ohm Meter(1A))	2000.0
A2 (Calibration of Micro-ohm Meter(100A))	3000.0

2547

National Test House (WR), Mumbai

ASTM D 257 (1999) - Solid insulating materials

Solid insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Solid insulating materials)	1000.0

2548

National Test House (SR), Chennai

IS 15778 (2007) - Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Hydrostatic Characteristics)	5000.0
7.1.3 (Length)	1000.0
7.1.2 (Wall Thickness)	1000.0
7.1.1 (Diameter at any point )	1000.0
9.4 (Reversion Test)	2000.0
9.6 (Density)	1000.0
9.2 (Opacity)	2000.0
10.4 (Flattening Test)	2000.0
10.5 (Tensile Strength )	2000.0
9.5 (Vicat Softening Temperature)	1500.0
Firm's Request (Fitment Test)	2000.0
10.3 (Resistance to External Blows)	2000.0

2549

National Test House (SR), Chennai

Customer Specification ALL (2022) - Cust Spfn. Test Result

Cust Spfn. Test Result

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Footwear Test Results)	5500.0
2 (Results of the Tests - Electrical)	1500.0
2 (Results of Tests)	6000.0
3 (Test Results)	5500.0
5 (Effect on water)	2000.0
6 (Results of the Test(All other Custom Test))	15500.0
7 (Results of Test(all other Custom tests))	14000.0
8 (Vicat Softening Temperature)	1500.0
9 (Opacity Test)	2000.0
10 (Results of the Test)	-
11 (Results of the Tests)	5000.0
12 (100% Cotton Test)	2000.0
13 (100% Cotton Test)	2000.0
14 (Identification of Material)	2000.0
15 (Results of the Tests Handloom Cotton Bed sheet)	26400.0
16 (Results of the Tests firms requirement handloom cotton bed sheet)	9400.0
17 (Results of the Test Custom spfn)	11000.0
18 (Results of Tests-Raincoat)	9000.0
19 (Water Absorption Test at RT)	1000.0
20 (Result of the Tests (Foam Material) Attached Annexure)	6000.0
21 (Results of the Tests (SMC profile) Annexure attached)	21500.0
22 (Result of the Tests (UPVC profile) Attached Annexure)	16500.0
23 (Thickness, mm)	1000.0
24 (Density at RT)	1000.0
25 (Hardness Test - Shore A (Normal Condition))	1000.0
26 (Hardness Test - Shore A (After ageing Condition))	2000.0
27 (Results of the Test-Buckram (Annexure attached))	31500.0
28 (Accelerated Fading test (After72hours exposure))	5000.0
29 (Thickness, mm)	3000.0
30 (Count)	1000.0
31 (Fiber Composition)	2000.0
32 (Results of the Tests (Annexure attached Dungricloth))	11000.0
33 (Scouring loss, %)	1200.0
34 (pH value of aqueous extract (cold method))	1200.0
35 (Tensile Strength, MPa)	2000.0
36 (Elongation, %)	1000.0
37 (Tensile Strength, MPa & Elongation, %)	2000.0
38 (Results of Test (Pl. see Annexure attached))	12500.0
39 (Results of Tests (Annexure Attached AF5200))	15000.0
40 (Softening point)	2000.0
41 (Thickness test)	1000.0
42 (Elongation, % at 23deg Both Longitudinal & Transverse direction)	1000.0
43 (Joint Strength, N/5cm width, in Longitudinal & Transverse direction)	2000.0
44 (Tear Strength, N in Longitudinal & Transverse direction)	2000.0
45 (Cold Flexibility at (-)2degC)	2000.0
46 (Results of the tests(Annexure-Polycarbonate Sheet))	9000.0
47 (Shore Hardness, Shore-A)	1000.0
48 (Identification of Material-FTIR)	2000.0
49 (Thickness of foam-Seat)	1000.0
50 (Thickness of Foam-Back)	1000.0
51 (Density of Foam-Seat)	1000.0
52 (Density of Foam-Back)	1000.0
53 (Powder coating thickness)	2000.0
54 (Thickness of Fabric)	1000.0
55 (Dimension Seat Size)	1000.0
56 (Dimension Back size)	1000.0
57 (UV Exposure (Protection) Test)	5000.0
58 (Results of tests (Polycarbonate sheet))	4000.0
59 (Test Results of Tiffin Carrier Bag)	8000.0
60 (Material of Zip Runner)	1200.0
61 (Test results of Tiffin Carrier Bag - Dimensions & Visuals)	2000.0
62 (Density)	1000.0
63 (Tensile Strength)	2000.0
64 (Compressibility(%))	1000.0
65 (Recovery (%))	1000.0

2550

National Test House (SR), Chennai

IS 3203 (1982) - Methods of testing local thickness of electroplated coatings (First Revision)

Methods of testing local thickness of electroplated coatings (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3203 (Coating thickness)	2000.0