| 2491 |
National Test House (WR), Mumbai
| RDSO SPECIFICATION No. M&C/PCN/123/2018 (2018) - SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK) |
SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Weight per epoxy equivalent on non-volatile vehicle content basis (Cl.4 of IS:9162-1979)) |
3500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) a) Surface dry (IS: 101 (Pt. 3/Sec.1)-1986) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) b) Recoating time (IS: 101 (Pt. 3/Sec.1)-1986) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) c) Hard dry (IS: 101 (Pt. 3/Sec.1)-1986) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at 27(+/-2 deg C) d) Curing time (IS: 101 (Pt. 3/Sec.1)-1986) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Consistency (IS: 101 (Pt. 1/Sec. 5)-1989) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Finish (IS: 101 (Pt. 3/Sec. 4)-1987) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Colour (IS: 101 (Pt. 4/Sec. 2)-1989) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Dry film thickness per coat, by brush/air/airless spray (IS: 101 (Pt.3/Sec.2)-1989 By Elecometer Thickness gauge meter) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Volume solids, Appendix-I of RDSO SPECIFICATION No.M&C/PCN/123/2018) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Scratch hardness (at 1.5 Kg load) (IS: 101 Pt.5/Sec.2)-1988) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Flexibility & Adhesion (6.25 mm Mandrel) (IS: 101 Pt.5/Sec.2)-1988) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Flash point for both the packs (IS: 101 (Pt.1/Sec. 6)-1987) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to salt spray for 3000 hours (ASTM: B-117)) |
100000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Protection against corrosion under condition of condensation for 3000 hours (IS: 101 (Pt. 6/Sec.1)-1988) |
75000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Keeping properties for both the packs (IS : 101 (Pt. 6/Sec.2)-1989) |
5000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Covering Capacity, min i) 100 micron DFT (IS: 101 (Pt.4/Sec.1)-1988) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Covering Capacity, min ii) 75 micron DFT (IS: 101 (Pt.4/Sec.1)-1988) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals i) 25% caustic soda solution (w/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018) |
3000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals ii) 30% sulphuric acid solution (v/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018) |
3000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals iii) 20% hydrochloric acid solution (v/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018) |
3000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals iv) Resistance to tap Water for 3000 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Pot life at 27(+/-2) deg C, min. Appendix-III of RDSO SPECIFICATION No.M&C/PCN/123/2018) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Mass in kg/10 litres, min, (IS : 101 (Pt. 1/Sec.7)-1987) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Impact resistance test at height 31 inch and weight 3.226 pound) (100 inch pound load), (ASTM D 2794)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Cathodic disbondment test, max) |
10000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Abrasion Resistance test for 1000 cycles with CS-17 wheels & 1.0 Kg load (ASTM D 4060)) |
3000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Adhesion test (ASTM D 3359)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Adhesion & Compatibility test with Acrylic Polyurethane Paint (ASTM D 3359 & Appendix -IV)) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Pull of Adhesion test, Min (ASTM D 4541)) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/123/2018 (Please refer annexure for test result as per RDSO SPECIFICATION No.M&C/PCN/123/2018) |
1.0 |
|
|
| 2492 |
National Test House (ER), Kolkata
| ASTM A572 (2007) - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Yield Point) |
2000.0 |
|
| 6 (Tensile Strength) |
2000.0 |
|
| 6 (Elongation) |
1000.0 |
|
|
| 2493 |
National Test House (SR), Chennai
| CUS/SR/MECH-15 - Dimensional measurement |
Dimensional measurement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Dimensions) |
1200.0 |
|
| 1.2 (Dimensions) |
3000.0 |
|
|
| 2494 |
National Test House (ER), Kolkata
| IS 2590 - SPECIFICATION FOR PRIMARY ALUMINIUM INGOTS FOR REMELTING FOR GENERAL ENGINEERING PURPOSES |
SPECIFICATION FOR PRIMARY ALUMINIUM INGOTS FOR REMELTING FOR GENERAL ENGINEERING PURPOSES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 i (Aluminium,) |
1200.0 |
|
| 6.1 ii (Copper) |
1200.0 |
|
| 6.1 iii (Silicon) |
1200.0 |
|
| 6.1 iv (Iron) |
1200.0 |
|
| 6.1 v (Manganese) |
1200.0 |
|
| vi (Zinc) |
1200.0 |
|
| 6.1 vii (Titanium + Vanadium) |
2400.0 |
|
|
| 2495 |
National Test House (NR), Ghaziabad
| Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103) (1991 RA 2018) - Customer Specification NTH ER CONCRETE ADMIXTURES
(IS 9103) |
Customer Specification NTH ER CONCRETE ADMIXTURES
(IS 9103) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2496 |
National Test House (SR), Chennai
| RFP-1/NA-S - Note Authenticator Cum Sorting Machines |
Note Authenticator Cum Sorting Machines |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Performance and verification for Note Authenticator Cum Sorting Machine(1+1)) |
35000.0 |
|
|
| 2497 |
National Test House (SR), Chennai
| IEC 62040 (2011) - Method of specifying the performance and test requirements |
Method of specifying the performance and test requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Performance check (1kVA)) |
10000.0 |
|
| 1 (Performance check(3kVA)) |
12500.0 |
|
| 1 (Performance check (5kVA)) |
12500.0 |
|
| 1 (Performance check(10kVA)) |
25000.0 |
|
| 1 (Performance check (20 KVA)) |
40000.0 |
|
|
| 2498 |
National Test House (NR), Ghaziabad
| IS 1079 (2009) - Hot Rolled Carbon Steel Sheet and Strip |
Hot Rolled Carbon Steel Sheet and Strip |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Tensile strength for Designation Drawing quality) |
1000.0 |
|
| 6 (Chemical composition) |
2500.0 |
|
| 27473 (Core Wire Diameter) |
1000.0 |
|
|
| 2499 |
National Test House (SR), Chennai
| Gravel Resistivity Measurement On lines of SFQP Power Grid Specification & Customer Specification - 20/40 Stone Aggregates Gravel Resistivity Measurement as per SFQP “Switchyard Civil works doc.no. C/QA&I/SFQA/SCW, Rev-04 dated 29.01.2016 and Customer Specification |
20/40 Stone Aggregates Gravel Resistivity Measurement as per SFQP “Switchyard Civil works doc.no. C/QA&I/SFQA/SCW, Rev-04 dated 29.01.2016 and Customer Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Description of Sample) |
1.0 |
|
| 2 (Sample Marking Provided on Sample) |
1.0 |
|
| 3 (Gravel Resistivity Measurement (as per Customer Specification)) |
20000.0 |
|
|
| 2500 |
National Test House (ER), Kolkata
| IS 5666 (1970 RA 2019) - Etch Primer |
Etch Primer |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Consistency) |
1000.0 |
|
| 3.3.2. (Mixed Material) |
500.0 |
|
| 3.4 (Viscosity) |
1000.0 |
|
| 3.5.1 (Air Drying) |
500.0 |
|
| 3.5.2 (Force Drying
Force Dry for 15 min at temp 85 to 100 Deg c &allow to cool for 1 hrs at Room Temp) |
500.0 |
|
| 3.6 (Finish) |
200.0 |
|
| 3.7 (Fineness of Dispersion) |
500.0 |
|
| 3.8 (Fitness to Take a Coat of Primer, Cellulose Finish) |
500.0 |
|
| 3.9 (Keeping Quality
(for Six Months)) |
4000.0 |
|
|
| 2501 |
National Test House (WR), Mumbai
| RDSO SPEC M&C/PCN/103/2020 (2020) - SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK) |
SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2502 |
National Test House (NER), Guwahati
| FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023) |
The Fertiliser (Control) Order 1985 (as amended upto Nov 2023) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Schedule I Part A (Water soluble potash (as K2O)) |
1000.0 |
|
| Schedule I Part A (Water soluble phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Ammoniacal nitrogen) |
1000.0 |
|
| Schedule I Part A (Total nitrogen) |
1000.0 |
|
| Schedule I Part A (Moisture) |
1000.0 |
|
| Schedule I Part A (Matter insoluble in water) |
1000.0 |
|
| Schedule I Part A (Moisture) |
1000.0 |
|
| Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve and not more than 5 per cent shall be below 1 mm IS sieve.) |
1000.0 |
|
| Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and retained on 1mm IS sieve.) |
1000.0 |
|
| Schedule I Part A (Available Phosphorous percent by weight) |
1000.0 |
|
| Schedule I Part A (Free phosphoric acid (as P 2O5)) |
1000.0 |
|
| Schedule I Part A (Sulphate Sulphur percent by weight) |
1000.0 |
|
| Schedule I Part A (Biuret) |
1000.0 |
|
| Schedule I Part A (Neem oil content soluble in Benzene,) |
1000.0 |
|
| Schedule I Part A (Magnesium (as Mg)) |
1000.0 |
|
| Schedule I Part A (Elemental sulphur (as S)) |
1000.0 |
|
| Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Iron (as Fe)) |
1000.0 |
|
| Schedule I Part A (Copper (as Cu)) |
1000.0 |
|
| Schedule I Part A (Manganese (as Mn)) |
1000.0 |
|
| Schedule I Part A (Cadmium (as Cd)) |
1000.0 |
|
| Schedule I Part A (Molybdenum (as Mo)) |
1000.0 |
|
| Schedule I Part A (Lead (as Pb) ) |
1000.0 |
|
| Schedule I Part A (Nitrate nitrogen) |
1000.0 |
|
| Schedule I Part A (Magnesium as MgO) |
1000.0 |
|
| Schedule I Part A (Boron (as B)) |
1000.0 |
|
| Schedule I Part A (Water soluble calcium (as Ca)) |
1000.0 |
|
| Schedule I Part A (Zinc (as Zn)) |
1000.0 |
|
| Schedule I Part A (Arsenic (as As)) |
1000.0 |
|
| Schedule I Part A (pH (5 % solution)) |
1000.0 |
|
| Schedule I Part A (Total Chloride (as Cl) percent by weight) |
1000.0 |
|
| Schedule I Part A (Free acid (as H2SO4)) |
1000.0 |
|
| Schedule I Part A (Specific gravity (kg/l)) |
1000.0 |
|
| Schedule I Part A (Sodium as NaCl) |
1000.0 |
|
| Schedule I Part A (Particle Size) |
1000.0 |
|
|
| 2503 |
National Test House (WR), Mumbai
| 266 (1993 (RA2020)) - Sulphuric Acid |
Sulphuric Acid |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 and 4.3 (i) (Total Acidity (as H2SO4)) |
1000.0 |
|
| 4.2 and 4.3 (ii) (Residue on Ignition) |
500.0 |
|
| 4.2 and 4.3 (iii) (Iron (as Fe)) |
500.0 |
|
| 4.2 and 4.3 (iv) (Chlorides (as Cl)) |
500.0 |
|
| 4.2 and 4.3 (v) (Lead (as Pb)) |
1.0 |
|
| 4.2 and 4.3 (vi) (Arsenic (as As)) |
500.0 |
|
| 4.2 and 4.3 (vii) (Oxidizable Impurities (as SO2)) |
500.0 |
|
| 4.2 and 4.3 (viii) (Organic Matter) |
500.0 |
|
| 4.2 and 4.3 (ix) (Nitrates (as NO2)) |
500.0 |
|
| 4.2 and 4.3 (x) (Ammonia (as NH3)) |
500.0 |
|
| 4.2 and 4.3 (xi) (Selenium (as Se)) |
500.0 |
|
| 4.2 and 4.3 (xii) (Manganese (as Mn)) |
500.0 |
|
| 4.2 and 4.3 (xiii) (Copper (as Cu)) |
500.0 |
|
| 4.2 and4.3 (xiv) (Zinc (as Zn)) |
500.0 |
|
| 4.2 and 4.3 (xv) (Nitrates, Nitrites, and Ammonia (as N)) |
500.0 |
|
| 4.1.3 (Preliminary Examination) |
500.0 |
|
| Specific Gravity (Specific Gravity) |
500.0 |
|
| TEST RESULTS AS PER ANNEXURE (TEST RESULTS AS PER ANNEXURE) |
5000.0 |
|
|
| 2504 |
National Test House (ER), Kolkata
| Customized IS:11673-1992 (1992) - Sodium Hypo Chlorite Specification |
Sodium Hypo Chlorite Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Available Chlorine % by mass by Volume) |
2000.0 |
|
|
| 2505 |
National Test House (SR), Chennai
| Customer Specification - Lightning Impulse Voltage - Lightning Impulse Voltage Test on HV Bushings - Customer Specification |
Lightning Impulse Voltage Test on HV Bushings - Customer Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Lightning Impulse test Full wave - Customer Specification (Lightning Impulse test Full wave on HV Bushings - Customer Specification) |
10500.0 |
|
| Lightning Chopped Impulse test - Customer Specification (Lightning Chopped Impulse test on HV Bushings - Customer Specification) |
13000.0 |
|
| 3 (Dielectric Test on Tap Changer - Lightining Impulse , Chopped Impulse and High Voltage Test) |
122500.0 |
|
| Lightning Impulse test (Lightning Impulse test Full wave) |
15000.0 |
|
|
| 2506 |
National Test House (NR), Ghaziabad
| IS 16205(Part24):2018 (2018) - Conduit Systems for Cable Management |
Conduit Systems for Cable Management |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.0 (Table101) (Dimension) |
2000.0 |
|
| 10.2 (Compression Test) |
3000.0 |
|
| 10.3 (Impact Test) |
4000.0 |
|
|
| 2507 |
National Test House (ER), Kolkata
| IS 14246 (2024) - Continuously Pre-Painted Galvanized Steel Sheets and Strips |
Continuously Pre-Painted Galvanized Steel Sheets and Strips |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Bend Test) |
1000.0 |
|
| 9 (Mass of Sheet) |
1000.0 |
|
| 8 (SALT SPRAY TEST (CORROSION RESISTANCE)) |
50000.0 |
|
| 4.2 (Mass of Zinc Coating) |
2000.0 |
|
| 4.3 (Paint Coating Thickness) |
2000.0 |
|
| 6.3 (Pencil Hardness Test) |
1000.0 |
|
| 6.4 (Impact Resistance Test) |
1000.0 |
|
| 6.5 (Cross Hatch Test) |
1000.0 |
|
| 4 (Chemical Analysis as per Is 513 (Part-1):2016) |
2500.0 |
|
| 4 (Tensile strength, MPa) |
1000.0 |
|
| 4 (Yield Stress, MPa) |
1000.0 |
|
| 4 (% Elongation) |
1000.0 |
|
| 9 (Base Metal Thickness) |
500.0 |
|
| 9 (Total Coated Thickness (as received condition), mm) |
500.0 |
|
|
| 2508 |
National Test House (NR), Ghaziabad
| JIS G 3448 - Light gauge stainless steel tubes for ordinary piping |
Light gauge stainless steel tubes for ordinary piping |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Outside Diameter) |
1000.0 |
|
| 6 (Thickness) |
1000.0 |
|
| 3 (Chemical Composition) |
5000.0 |
|
| 6.1 (Weight per Metre, kg) |
1000.0 |
|
| 9.2 (Flattening Test) |
1000.0 |
|
| 9.1 (Tensile strength test as per IS 1608 (Part 1):2022, N/mm2) |
2000.0 |
|
| 9.1 (Elongation percent, % as per IS 1608(Part 1):2022) |
1000.0 |
|
|
| 2509 |
National Test House (NR), Ghaziabad
| IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 - Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables — Specification,Part 1 For Working Voltages up to and including 1 100 Volts ( Second Revision ). |
Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables — Specification,Part 1 For Working Voltages up to and including 1 100 Volts ( Second Revision ). |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.15.1 (Type tests as per Cl.15.1) |
26000.0 |
|
| C) and f) of Cl.15.1 (Test for thickness of insulation and sheath and Insulation Resistance) |
5000.0 |
|
| Test1 (Type tests) |
20000.0 |
|
| Test2 (Type Tests) |
40000.0 |
|
| Test3 (Type Tests) |
22000.0 |
|
| Test4 (Type Tests) |
42000.0 |
|
| Test5 (Type Tests) |
24000.0 |
|
| 10.1 (Core Identification) |
2000.0 |
|
| Cl.15.1(f) (Insulation Resistance at Ambient Temperature) |
2000.0 |
|
| Type Tests-4Core-FRLSH (Type Tests) |
46000.0 |
|
| Test (Tests) |
15000.0 |
|
| Tests (Tests) |
17000.0 |
|
| Test (Tests) |
11500.0 |
|
| Tests (Tests) |
12500.0 |
|
| Tests (Tests) |
21500.0 |
|
| Tests2 (Tests) |
17500.0 |
|
| Test (HighVoltage Test at Room Temperature) |
8000.0 |
|
| Test (Insulation Resistance Test) |
4000.0 |
|
| Test (Test) |
3000.0 |
|
| Type Tests (Type Tests along with Oxygen index,Temperature Index and Test for halogen acid gas evolution.) |
37000.0 |
|
| Type Tests (Type Tests along with Oxygen index,Temperature Index and Test for halogen acid gas evolution.) |
41000.0 |
|
| Tests (Tests) |
16000.0 |
|
| Tests (Tests) |
27000.0 |
|
| Tests (Tests) |
31000.0 |
|
| Type tests as per IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 along with Fire Properties: a) Oxygen index test ,b) Flame retardance test on single cable,c) Smoke density,d) Test for halogen acid gas evolution and e) Temperature index. (Tests) |
86000.0 |
|
| Tests (Tests) |
5000.0 |
|
| Tests (Type Tests,Category-01 and Optional Tests) |
36500.0 |
|
| Tests (Acceptance Tests,Category-C2.) |
83000.0 |
|
| Tests (Test for thickness of insulation and sheath,Resistance test,Hot Set Test,Insulation resistance (volume resistivity test) at Room Temperature and High Voltage Test at Room Temperature) |
8000.0 |
|
| Tests (Type Tests along with Oxygen index test ,Flame retardance test on single cable,Flame retardance test on bunched cable,Smoke density,Test for halogen acid gas evolution,Temperature index.) |
92000.0 |
|
| Tests (Insulation Resistance Test and High Voltage Test at ambient Temperature.) |
6000.0 |
|
| Conductor Resistance Test (Tests) |
4000.0 |
|
| 1.Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Tensile Strength and elongation at break test for insulation and sheath. 4. High voltage test, 5. Insulation resistance (volume resistivity) test. (Tests) |
9500.0 |
|
| Tests (d) Conductor resistance tests, e) Test for thickness of insulation (eccentricity) and sheath, f) Hot set test for insulation, g) Tensile strength and elongation at break test for insulation and outer sheath and k) Insulation resistance (volume resistivity) test}) |
10500.0 |
|
| Tests(single Core) (Hot Set Test,Test for thickness of Insulation & Sheath,Tensile Strength & Elongation at break and weight.) |
5000.0 |
|
| Routine Test (Conductor Resistance Test and High Voltage Test) |
10000.0 |
|
| Tests (Acceptance Tests: Conductor resistance test,Test for thickness of insulation and sheath ,Tensile strength and elongation at break test for insulation and sheath.High voltage test, and Insulation resistance (volume resistivity) test.) |
14500.0 |
|
| Tests (Marking,Conductor Resistance and High Voltage Test(2Core)) |
6500.0 |
|
| Type Tests(4 Core) (Type Tests along with Oxygen index test,Smoke density,Test for halogen acid gas evolution,Temperature index.) |
45998.0 |
|
| Test (Weight of the Conductor) |
3000.0 |
|
| Additional Core(2 Core) (----) |
4000.0 |
|
| Additional Core (---) |
2000.0 |
|
| Tests(2 Core) (Conductor Resistance Test and Thickness of Insulation) |
5000.0 |
|
| Tests(4 Core) (1. Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Hot set test for insulation. 4. Tensile Strength and elongation at break test for insulation and sheath. 5. High voltage test, 6. Insulation resistance (volume resistivity) test.) |
16500.0 |
|
| Tests (1. Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Hot set test for insulation. 4. Tensile Strength and elongation at break test for insulation and sheath. 5. High voltage test, 6. Insulation resistance (volume resistivity) test.) |
10500.0 |
|
| Additional Core (---) |
2000.0 |
|
| Additional Core (----) |
4000.0 |
|
| Additional Core (----) |
6000.0 |
|
| Armour Percentage Coverage test (Armour Percentage Coverage test) |
500.0 |
|
| Tests(4 Core) (Acceptance tests with Oxygen Index, Temperature Index, Halogen Acid Evolution.) |
34000.0 |
|
| Tests(1 Core / 2Core) (Annealing Test (if Applicable), Tensile Test for Aluminium(If Applicable), Conductor Resistance Test, Test for the thickness of insulation and sheath,Hot Set Test(if Applicable),Tensile strength and elongation at break of Insulation and Outer Sheath, Insulation Resistance Test and High Voltage Test.) |
10000.0 |
|
| Tests(3 Core) (Annealing Test (if Applicable), Tensile Test for Aluminium(If Applicable), Conductor Resistance Test, Test for the thickness of insulation and sheath,Hot Set Test(if Applicable), Tensile strength and elongation at break of Insulation and Outer Sheath, Insulation Resistance Test and High Voltage Test.) |
12000.0 |
|
| Tests (High Voltage and Thickness of Insulation) |
9000.0 |
|
| Additional Core(8 Cores) (---) |
14000.0 |
|
| Tests (Tensile test for Aluminium and Wrapping test for Aluminum) |
1500.0 |
|
| Tests(1 Core) (Type tests as per IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 along with Fire Properties: a) Oxygen index test ,b) Flame retardance test on single cable, c) Flame retardance test on buncbed cable,d) Smoke density,e) Test for halogen acid gas evolution and f) Temperature index.) |
90000.0 |
|
| Additional Cores (---) |
5998.0 |
|
| PFC Tests(2 Core) (Acceptance Tests,Category-01.) |
10000.0 |
|
| Tests (High Voltage Test,Tensile Test(for Aluminium),Conductor Resistance Test,
Tensile Strength and Elongation at Break Test for Insulation and Sheath(Before Ageing), Hot Set Test,
Volume Resistivity (IR Test) as per IS 7098(Part-1).) |
14500.0 |
|
| Tests(4 core) (Type tests and fire tests:a) Oxygen index test, b) Flame retardance test on single cable,c) Flame retardance test on buncbed cable,d) Test for halogen acid gas evolution and e) Temperature index .) |
56000.0 |
|
| Test (Smoke density as per ASTM) |
5000.0 |
|
|
| 2510 |
National Test House (NER), Guwahati
| IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2511 |
National Test House (ER), Kolkata
| EURAMET cg-2 (2011) - CALIBRATION OF GAUGE BLOCK COMPARATORS |
CALIBRATION OF GAUGE BLOCK COMPARATORS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Length) |
15000.0 |
|
|
| 2512 |
National Test House (WR), Mumbai
| Customized specification for Polycarbonate seal - Customized specification for Polycarbonate seal |
Customized specification for Polycarbonate seal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Breaking Strength ( On the lines of ASTM D 638 )-Breaking load between wire and seal in tension) |
3000.0 |
|
| - (Corrosive Resistance Test(On the lines of ASTM D 543-14)) |
2000.0 |
|
| - (Heat Resistance Test(On the lines of ASTM D 3045-92)) |
2000.0 |
|
|
| 2513 |
National Test House (ER), Kolkata
| Custom equaliser valve upper casing - Equaliser valve upper casing |
Equaliser valve upper casing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Carbon %) |
1000.0 |
|
| 2 (Manganese %) |
1000.0 |
|
| 3 (Silicon %) |
1000.0 |
|
| 4 (Chromium %) |
1000.0 |
|
| 5 (Nickel %) |
1000.0 |
|
| 6 (Copper %) |
1000.0 |
|
| 7 (Magnesium %) |
1000.0 |
|
|
| 2514 |
National Test House (ER), Kolkata
| FCO 1985 (as amended upto November 2023) - FCO 1985 (as amended upto October 2024) |
FCO 1985 (as amended upto October 2024) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Total Nitrogen) |
1000.0 |
|
| 2 (Ammoniacal Nitrogen) |
1000.0 |
|
| 3 (Nitrate Nitrogen) |
1000.0 |
|
| 4 (Urea Nitrogen) |
1000.0 |
|
| 5 (Total phosphorous (as P2O5) percent by weight) |
1000.0 |
|
| 6 (Water soluble phosphorous (as P2O5) percent by weight) |
1000.0 |
|
| 7 (Available phosphorous (as P2O5) percent by weight) |
1000.0 |
|
| 8 (Moisture percent by weight) |
1000.0 |
|
| 9 (Sulphate Sulphur (as S)) |
1000.0 |
|
| 10 (Elemental Sulphur (as S) percent by weight) |
1000.0 |
|
| 11 (Total elemental sulphur (as S), percent by weight) |
1000.0 |
|
| 12 (Free acidity (as H2SO4) percent by weight) |
1000.0 |
|
| 12 (Water soluble potassium as K2O, Percent by weight) |
1000.0 |
|
| 13 (Particle size -material retained between 1mm and 4mm IS sieve) |
1000.0 |
|
| 14 (Total Sulphur , Percent by weight) |
1000.0 |
|
| 15 (Calcium Nitrate, Percent by weight) |
1000.0 |
|
| 16 (Free phosphoric acid (as P2O5) percent by weight) |
1000.0 |
|
| 17 (Magnesium as Mg , percent by weight) |
1000.0 |
|
| 18 (Magnesium as MgO , percent by weight) |
1000.0 |
|
| 19 (Magnesium as MgCl2, percent by weight) |
1000.0 |
|
| 20 (Sodium as NaCl percent by weight) |
1000.0 |
|
| 21 (Total Chlorides, as Cl percent by weight) |
1000.0 |
|
| 22 (Matter insoluble in water, percent by weight) |
1000.0 |
|
| 23 (pH of 5% solution) |
1000.0 |
|
| 24 (As as As % by weight) |
1000.0 |
|
| 25 (As as As2O3, % by weight) |
1000.0 |
|
| 26 (Specific gravity at given temperature) |
1000.0 |
|
| 27 (Biuret % by weight) |
1000.0 |
|
| 28 (Particle size, percent retained between given IS sieves) |
1000.0 |
|
| 29 (Manganese as Mn % by weight) |
1000.0 |
|
| 30 (Zinc as Zn % by weight) |
1000.0 |
|
| 31 (Zinc as Zn % by weight in the form of Zn EDTA) |
1000.0 |
|
| 32 (Zinc as Zn % by weight in the form of Zn HEDP) |
1000.0 |
|
| 33 (Iron/Fe as Fe % by weight in the form of FeHEDP) |
1000.0 |
|
| 35 (Lead as Pb % by weight) |
1000.0 |
|
| 36 (Cadmium as Cd % by weight) |
1000.0 |
|
| 37 (Copper as Cu % by weight) |
1000.0 |
|
| 38 (Iron as Fe % by weight) |
1000.0 |
|
| 39 (Boron as B % by weight) |
1000.0 |
|
| 40 (Calcium as Ca % by weight) |
1000.0 |
|
| 12.1 (Molybdenum) |
1000.0 |
|
| 55 (Fe as Fe-EDTA) |
1000.0 |
|
| 56 (Appearance) |
1000.0 |
|
| 1 (Total Nitrogen(ammoniacal and Urea)percent by weight) |
1000.0 |
|
| 15 (Particle size-Minimum 90% of material shall be retained between 1mm and 4 mm IS sieve) |
1000.0 |
|
| 1 (Carbon (% by mass)) |
1000.0 |
|
| 1 (Carbon : NItrogen ratio (C: N)) |
1000.0 |
|
| 1 (Bulk density) |
1200.0 |
|
| 1 (Total organic carbon) |
1200.0 |
|
| 1 (Manganese as Mn (% by mass)) |
1200.0 |
|
| 1 (Contamination level) |
1200.0 |
|
| 1 (Efficiency Character) |
1200.0 |
|
| 0 (Available Phosphorus (as P2O5),) |
1000.0 |
|
| 0 (Colour) |
1000.0 |
|
| 0 (Fluoride) |
1000.0 |
|
|
| 2515 |
National Test House (NR), Ghaziabad
| IRS-M-39-2000 (2000) - INDIAN RAILWAY STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACEPTANCE CRITERIA OF WIRE AND FLUX FOR SUBMERGED ARC WELDING OF STRUCTURAL STEEL FOR USE ON INDIAN RAILWAYS |
INDIAN RAILWAY STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACEPTANCE CRITERIA OF WIRE AND FLUX FOR SUBMERGED ARC WELDING OF STRUCTURAL STEEL FOR USE ON INDIAN RAILWAYS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.7.3.3 (Radiographic Examination) |
2000.0 |
|
| 5.7.3.3 (Radiographic Examination) |
4000.0 |
|
|
| 2516 |
National Test House (ER), Kolkata
| IS 1321 : Part 1 (2003) - Sisal ropes – Specification Part 1 Untarred varieties (fourth revision) |
Sisal ropes – Specification Part 1 Untarred varieties (fourth revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Identification of Fiber) |
2000.0 |
|
| 5.2 (Count of the Yarn) |
1000.0 |
|
| 5.3 (No of Yarns per Strand) |
500.0 |
|
| 5.3 (Lay of Strand) |
500.0 |
|
| 5.4 (No. of Strands in the Rope) |
500.0 |
|
| 5.4 (Lay of Rope) |
500.0 |
|
| 5.4.1 (Angle of Lay) |
1000.0 |
|
| 5.5 (Percentage of Lubricant) |
2000.0 |
|
| 5.6 (Zinc Content) |
1000.0 |
|
| 5.6 (Copper Content.) |
1000.0 |
|
| 6.1 (Mass of the Coil) |
1000.0 |
|
| 6.2 (Pitch) |
1000.0 |
|
| 6.3 (Length of the Coil) |
1000.0 |
|
| 6.4 (Linear Density of Rope) |
1000.0 |
|
| 6.4 (Breaking Strength Of Rope) |
5000.0 |
|
| 6.5 (Diameter of Rope) |
500.0 |
|
|
| 2517 |
National Test House (WR), Mumbai
| IS 10322 : Part 1 (2014) - Luminaires: Part 1 general requirements and tests (First Revision) |
Luminaires: Part 1 general requirements and tests (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 () |
- |
|
|
| 2518 |
National Test House (WR), Mumbai
| IS 374 (2019) - Specification for electric ceiling type fans and regulators (Third Revision) |
Specification for electric ceiling type fans and regulators (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.1,e (Input in watts) |
10.0 |
|
| 14.5 (Power factor) |
500.0 |
|
| 14.4 (Fan speed (RPM), %) |
100.0 |
|
|
| 2519 |
National Test House (WR), Mumbai
| Customer Specification - Electrical product |
Electrical product |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Tests) |
75000.0 |
|
| 1 (As per Customer request) |
20000.0 |
|
| 1 (As per customer requirement) |
40000.0 |
|
| 5 (Tests as per Customer request) |
45000.0 |
|
| 6 (Tests as per Customer request 2) |
30000.0 |
|
|
| 2520 |
National Test House (ER), Kolkata
| Custom-24-ER-LM - Pull out Test for Assembly |
Pull out Test for Assembly |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Pull out Test for Assembly) |
5000.0 |
|
|
